← Commit history
README.md+31−24
@@ -8,26 +8,26 @@ PIC16LF18444-E from Microchip Tech, in a UQFN-20(4x4). Pinout and pin descriptio  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | RA3/MCLR/VPP | input | Input-only port RA3 that serves as the active-low master clear (reset) input and the programming voltage (VPP) pin, with IOCA3 interrupt-on-change and a weak pull-up. |-| 2 | RC5 | bidirectional | General-purpose port RC5 with analog input ANC5, default MDCARH, T4IN and CCP1IN inputs, IOCC5 interrupt-on-change and a weak pull-up. |-| 3 | RC4 | bidirectional | General-purpose port RC4 with analog input ANC4, IOCC4 interrupt-on-change and a weak pull-up. |-| 4 | RC3 | bidirectional | General-purpose port RC3 with analog input ANC3, comparator inputs C1IN3-/C2IN3-, CCP2IN and CLCIN1 default inputs, IOCC3 interrupt-on-change and a weak pull-up. |-| 5 | RC6 | bidirectional | General-purpose port RC6 with analog input ANC6, default SS1 input, IOCC6 interrupt-on-change and a weak pull-up. |-| 6 | RC7 | bidirectional | General-purpose port RC7 with analog input ANC7, IOCC7 interrupt-on-change and a weak pull-up. |-| 7 | RB7 | bidirectional | General-purpose port RB7 with analog input ANB7, default T6IN and CK1 functions, IOCB7 interrupt-on-change and a weak pull-up (SDI2/SDA2 listed, but MSSP2 is not available on PIC16(L)F18444). |-| 8 | RB6 | bidirectional | General-purpose port RB6 with analog input ANB6, default SCK1/SCL1 function (I2C logic levels), IOCB6 interrupt-on-change and a weak pull-up. |-| 9 | RB5 | bidirectional | General-purpose port RB5 with analog input ANB5, default CCP3IN, RX1/DT1 and CLCIN3 functions, IOCB5 interrupt-on-change and a weak pull-up (SCK2/SCL2 listed, but MSSP2 is not available on PIC16(L)F18444). |-| 10 | RB4 | bidirectional | General-purpose port RB4 with analog input ANB4, default T5G, SDI1/SDA1 (I2C logic levels) and CLCIN2 functions, IOCB4 interrupt-on-change and a weak pull-up. |-| 11 | RC2 | bidirectional | General-purpose port RC2 with analog input ANC2, ADACT trigger, comparator inputs C1IN2-/C2IN2-, MDCARL and T5CKI default inputs, IOCC2 interrupt-on-change and a weak pull-up. |-| 12 | RC1 | bidirectional | General-purpose port RC1 with analog input ANC1, comparator inputs C1IN1-/C2IN1-, IOCC1 interrupt-on-change and a weak pull-up. |-| 13 | RC0 | bidirectional | General-purpose port RC0 with analog input ANC0, comparator input C2IN0+, T3CKI/T3G default inputs, IOCC0 interrupt-on-change and a weak pull-up. |-| 14 | RA2 | bidirectional | General-purpose port RA2 with analog input ANA2, ADCVREF- reference, DAC1VREF-, T0CKI, CWG1IN/CWG2IN, ZCD1 and CLCIN0 functions, INT0 external interrupt, IOCA2 interrupt-on-change and a weak pull-up. |-| 15 | RA1/ICSPCLK | bidirectional | General-purpose port RA1 with analog input ANA1, ADCVREF+ reference, C1IN0-/C2IN0- comparator inputs, DAC1VREF+, MDSRC and SS2 default inputs, ICSPCLK/ICDCLK programming and debug clock, IOCA1 interrupt-on-change and a weak pull-up. |-| 16 | RA0/ICSPDAT | bidirectional | General-purpose port RA0 with analog input ANA0, comparator input C1IN0+, DAC1OUT1 output, ICSPDAT/ICDDAT programming and debug data, IOCA0 interrupt-on-change and a weak pull-up. |+| 1 | MCLR/VPP/RA3 | input | Input-only port pin RA3, also the active-low master clear (MCLR) reset input and the high-voltage programming input VPP. |+| 2 | RC5 | bidirectional | General-purpose PORTC I/O pin RC5 with analog input ANC5, interrupt-on-change IOCC5 and weak pull-up; also default for CCP1IN, T4IN and MDCARH inputs. |+| 3 | RC4 | bidirectional | General-purpose PORTC I/O pin RC4 with analog input ANC4, interrupt-on-change IOCC4 and weak pull-up. |+| 4 | RC3 | bidirectional | General-purpose PORTC I/O pin RC3 with analog input ANC3, comparator inputs C1IN3-/C2IN3-, interrupt-on-change IOCC3 and weak pull-up; also default for CCP2IN and CLCIN1. |+| 5 | RC6 | bidirectional | General-purpose PORTC I/O pin RC6 with analog input ANC6, interrupt-on-change IOCC6 and weak pull-up; also default for SS1. |+| 6 | RC7 | bidirectional | General-purpose PORTC I/O pin RC7 with analog input ANC7, interrupt-on-change IOCC7 and weak pull-up. |+| 7 | RB7 | bidirectional | General-purpose PORTB I/O pin RB7 with analog input ANB7, interrupt-on-change IOCB7 and weak pull-up; also default for T6IN, SDI2/SDA2 and CK1. |+| 8 | RB6 | bidirectional | General-purpose PORTB I/O pin RB6 with analog input ANB6, interrupt-on-change IOCB6 and weak pull-up; also default for SCK1/SCL1. |+| 9 | RB5 | bidirectional | General-purpose PORTB I/O pin RB5 with analog input ANB5, interrupt-on-change IOCB5 and weak pull-up; also default for CCP3IN, SCK2/SCL2, RX1/DT1 and CLCIN3. |+| 10 | RB4 | bidirectional | General-purpose PORTB I/O pin RB4 with analog input ANB4, interrupt-on-change IOCB4 and weak pull-up; also default for T5G, SDI1/SDA1 and CLCIN2. |+| 11 | RC2 | bidirectional | General-purpose PORTC I/O pin RC2 with analog input ANC2, ADACT, comparator inputs C1IN2-/C2IN2-, interrupt-on-change IOCC2 and weak pull-up; also default for MDCARL and T5CKI. |+| 12 | RC1 | bidirectional | General-purpose PORTC I/O pin RC1 with analog input ANC1, comparator inputs C1IN1-/C2IN1-, interrupt-on-change IOCC1 and weak pull-up. |+| 13 | RC0 | bidirectional | General-purpose PORTC I/O pin RC0 with analog input ANC0, comparator input C2IN0+, interrupt-on-change IOCC0 and weak pull-up; also default for T3CKI and T3G. |+| 14 | RA2 | bidirectional | General-purpose PORTA I/O pin RA2 with analog input ANA2, ADCVREF-, DAC1VREF-, ZCD1, T0CKI, CWG1IN/CWG2IN, CLCIN0, INT0 and interrupt-on-change IOCA2. |+| 15 | RA1/ICSPCLK | bidirectional | General-purpose PORTA I/O pin RA1 with analog input ANA1, ADCVREF+, C1IN0-/C2IN0-, DAC1VREF+, interrupt-on-change IOCA1; also the ICSP/ICD programming clock (ICSPCLK/ICDCLK). |+| 16 | RA0/ICSPDAT | bidirectional | General-purpose PORTA I/O pin RA0 with analog input ANA0, C1IN0+, DAC1OUT1, interrupt-on-change IOCA0; also the ICSP/ICD programming data pin (ICSPDAT/ICDDAT). | | 17 | VSS | power_in | Ground reference for the device; the exposed bottom pad is recommended to be connected to VSS. |-| 18 | VDD | power_in | Positive supply, 1.8V to 3.6V for PIC16LF184XX devices. |-| 19 | RA5 | bidirectional | General-purpose port RA5 with analog input ANA5, T1CKI/T2IN/SMT1SIG default inputs, CLKIN/OSC1 external clock input and SOSCI secondary oscillator pin, IOCA5 interrupt-on-change and a weak pull-up. |-| 20 | RA4 | bidirectional | General-purpose port RA4 with analog input ANA4, T1G and CCP4IN/SMT1WIN default inputs, CLKOUT/OSC2 oscillator output and SOSCO secondary oscillator pin, IOCA4 interrupt-on-change and a weak pull-up. |+| 18 | VDD | power_in | Positive supply, 1.8V to 3.6V for PIC16LF184XX. |+| 19 | RA5 | bidirectional | General-purpose PORTA I/O pin RA5 with analog input ANA5, interrupt-on-change IOCA5; also CLKIN/SOSCI/OSC1 oscillator input and default for T1CKI, T2IN and SMT1SIG. |+| 20 | RA4 | bidirectional | General-purpose PORTA I/O pin RA4 with analog input ANA4, interrupt-on-change IOCA4; also CLKOUT/SOSCO/OSC2 oscillator output and default for T1G, SMT1WIN and CCP4IN. | | 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |  ## Key specifications@@ -45,10 +45,17 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Operating Voltage Range (PIC16LF184XX) |  | 1.8 |  | 3.6 | V | PIC16LF184XX (LF variant) | 2 |-| Temperature Range, Industrial |  | -40 |  | 85 | °C | Industrial | 2 |-| Temperature Range, Extended |  | -40 |  | 125 | °C | Extended | 2 |-| High-Precision Internal Oscillator (HFINTOSC) accuracy |  | -2 |  | 2 | % | At calibration (nominal) | 4 |+| Operating voltage range (PIC16LF184XX) |  | 1.8 |  | 3.6 | V | PIC16LF184XX variant (LF) | 2 |+| Temperature range, Industrial |  | -40 |  | 85 | °C | Industrial grade | 2 |+| Temperature range, Extended |  | -40 |  | 125 | °C | Extended grade | 2 |+| Operating speed, clock input | fOSC |  |  | 32 | MHz | DC to 32 MHz clock input | 1 |+| Minimum instruction cycle |  | 125 |  |  | ns | minimum instruction cycle | 1 |+| High-Precision Internal Oscillator (HFINTOSC) accuracy |  | -2 |  | 2 | % | at calibration (nominal) | 4 |+| 4x PLL input frequency (external source) |  | 4 |  | 8 | MHz | 4x PLL for use with external sources | 4 |+| External crystal/resonator oscillator frequency |  |  |  | 20 | MHz | three crystal/resonator modes | 5 |+| External clock input frequency |  |  |  | 32 | MHz | three external clock modes | 5 |+| NCO input clock frequency | fNCO |  |  | 32 | MHz | NCO input clock | 3 |+| 2x PLL frequency (with HFINTOSC) |  |  |  | 32 | MHz | 2x PLL for use with the HFINTOSC | 4 |  ## CAD (KiCad official) @@ -61,7 +68,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/40001894B.pdf) (18 pp, sha256 `709d6da773a01030`, retrieved 2026-11-12, tier: manufacturer)+- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/40001894B.pdf) (18 pp, sha256 `709d6da773a01030`, retrieved 2026-11-13, tier: manufacturer) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
package.json+28−28
@@ -1,6 +1,6 @@ {   "slug": "pic16lf18444-e-gz",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), UQFN-20(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -53,7 +53,7 @@       "mouser": "579-PIC16LF18444E/GZ"     },     "distributor_check": {-      "checked_at": "2026-11-12T22:12:48Z",+      "checked_at": "2026-11-13T02:44:09Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "PIC16LF18444-E/GZ-ND",@@ -68,99 +68,99 @@     "pins": [       {         "number": "1",-        "name": "RA3/MCLR/VPP",+        "name": "MCLR/VPP/RA3",         "type": "input",-        "description": "Input-only port RA3 that serves as the active-low master clear (reset) input and the programming voltage (VPP) pin, with IOCA3 interrupt-on-change and a weak pull-up."+        "description": "Input-only port pin RA3, also the active-low master clear (MCLR) reset input and the high-voltage programming input VPP."       },       {         "number": "2",         "name": "RC5",         "type": "bidirectional",-        "description": "General-purpose port RC5 with analog input ANC5, default MDCARH, T4IN and CCP1IN inputs, IOCC5 interrupt-on-change and a weak pull-up."+        "description": "General-purpose PORTC I/O pin RC5 with analog input ANC5, interrupt-on-change IOCC5 and weak pull-up; also default for CCP1IN, T4IN and MDCARH inputs."       },       {         "number": "3",         "name": "RC4",         "type": "bidirectional",-        "description": "General-purpose port RC4 with analog input ANC4, IOCC4 interrupt-on-change and a weak pull-up."+        "description": "General-purpose PORTC I/O pin RC4 with analog input ANC4, interrupt-on-change IOCC4 and weak pull-up."       },       {         "number": "4",         "name": "RC3",         "type": "bidirectional",-        "description": "General-purpose port RC3 with analog input ANC3, comparator inputs C1IN3-/C2IN3-, CCP2IN and CLCIN1 default inputs, IOCC3 interrupt-on-change and a weak pull-up."+        "description": "General-purpose PORTC I/O pin RC3 with analog input ANC3, comparator inputs C1IN3-/C2IN3-, interrupt-on-change IOCC3 and weak pull-up; also default for CCP2IN and CLCIN1."       },       {         "number": "5",         "name": "RC6",         "type": "bidirectional",-        "description": "General-purpose port RC6 with analog input ANC6, default SS1 input, IOCC6 interrupt-on-change and a weak pull-up."+        "description": "General-purpose PORTC I/O pin RC6 with analog input ANC6, interrupt-on-change IOCC6 and weak pull-up; also default for SS1."       },       {         "number": "6",         "name": "RC7",         "type": "bidirectional",-        "description": "General-purpose port RC7 with analog input ANC7, IOCC7 interrupt-on-change and a weak pull-up."+        "description": "General-purpose PORTC I/O pin RC7 with analog input ANC7, interrupt-on-change IOCC7 and weak pull-up."       },       {         "number": "7",         "name": "RB7",         "type": "bidirectional",-        "description": "General-purpose port RB7 with analog input ANB7, default T6IN and CK1 functions, IOCB7 interrupt-on-change and a weak pull-up (SDI2/SDA2 listed, but MSSP2 is not available on PIC16(L)F18444)."+        "description": "General-purpose PORTB I/O pin RB7 with analog input ANB7, interrupt-on-change IOCB7 and weak pull-up; also default for T6IN, SDI2/SDA2 and CK1."       },       {         "number": "8",         "name": "RB6",         "type": "bidirectional",-        "description": "General-purpose port RB6 with analog input ANB6, default SCK1/SCL1 function (I2C logic levels), IOCB6 interrupt-on-change and a weak pull-up."+        "description": "General-purpose PORTB I/O pin RB6 with analog input ANB6, interrupt-on-change IOCB6 and weak pull-up; also default for SCK1/SCL1."       },       {         "number": "9",         "name": "RB5",         "type": "bidirectional",-        "description": "General-purpose port RB5 with analog input ANB5, default CCP3IN, RX1/DT1 and CLCIN3 functions, IOCB5 interrupt-on-change and a weak pull-up (SCK2/SCL2 listed, but MSSP2 is not available on PIC16(L)F18444)."+        "description": "General-purpose PORTB I/O pin RB5 with analog input ANB5, interrupt-on-change IOCB5 and weak pull-up; also default for CCP3IN, SCK2/SCL2, RX1/DT1 and CLCIN3."       },       {         "number": "10",         "name": "RB4",         "type": "bidirectional",-        "description": "General-purpose port RB4 with analog input ANB4, default T5G, SDI1/SDA1 (I2C logic levels) and CLCIN2 functions, IOCB4 interrupt-on-change and a weak pull-up."+        "description": "General-purpose PORTB I/O pin RB4 with analog input ANB4, interrupt-on-change IOCB4 and weak pull-up; also default for T5G, SDI1/SDA1 and CLCIN2."       },       {         "number": "11",         "name": "RC2",         "type": "bidirectional",-        "description": "General-purpose port RC2 with analog input ANC2, ADACT trigger, comparator inputs C1IN2-/C2IN2-, MDCARL and T5CKI default inputs, IOCC2 interrupt-on-change and a weak pull-up."+        "description": "General-purpose PORTC I/O pin RC2 with analog input ANC2, ADACT, comparator inputs C1IN2-/C2IN2-, interrupt-on-change IOCC2 and weak pull-up; also default for MDCARL and T5CKI."       },       {         "number": "12",         "name": "RC1",         "type": "bidirectional",-        "description": "General-purpose port RC1 with analog input ANC1, comparator inputs C1IN1-/C2IN1-, IOCC1 interrupt-on-change and a weak pull-up."+        "description": "General-purpose PORTC I/O pin RC1 with analog input ANC1, comparator inputs C1IN1-/C2IN1-, interrupt-on-change IOCC1 and weak pull-up."       },       {         "number": "13",         "name": "RC0",         "type": "bidirectional",-        "description": "General-purpose port RC0 with analog input ANC0, comparator input C2IN0+, T3CKI/T3G default inputs, IOCC0 interrupt-on-change and a weak pull-up."+        "description": "General-purpose PORTC I/O pin RC0 with analog input ANC0, comparator input C2IN0+, interrupt-on-change IOCC0 and weak pull-up; also default for T3CKI and T3G."       },       {         "number": "14",         "name": "RA2",         "type": "bidirectional",-        "description": "General-purpose port RA2 with analog input ANA2, ADCVREF- reference, DAC1VREF-, T0CKI, CWG1IN/CWG2IN, ZCD1 and CLCIN0 functions, INT0 external interrupt, IOCA2 interrupt-on-change and a weak pull-up."+        "description": "General-purpose PORTA I/O pin RA2 with analog input ANA2, ADCVREF-, DAC1VREF-, ZCD1, T0CKI, CWG1IN/CWG2IN, CLCIN0, INT0 and interrupt-on-change IOCA2."       },       {         "number": "15",         "name": "RA1/ICSPCLK",         "type": "bidirectional",-        "description": "General-purpose port RA1 with analog input ANA1, ADCVREF+ reference, C1IN0-/C2IN0- comparator inputs, DAC1VREF+, MDSRC and SS2 default inputs, ICSPCLK/ICDCLK programming and debug clock, IOCA1 interrupt-on-change and a weak pull-up."+        "description": "General-purpose PORTA I/O pin RA1 with analog input ANA1, ADCVREF+, C1IN0-/C2IN0-, DAC1VREF+, interrupt-on-change IOCA1; also the ICSP/ICD programming clock (ICSPCLK/ICDCLK)."       },       {         "number": "16",         "name": "RA0/ICSPDAT",         "type": "bidirectional",-        "description": "General-purpose port RA0 with analog input ANA0, comparator input C1IN0+, DAC1OUT1 output, ICSPDAT/ICDDAT programming and debug data, IOCA0 interrupt-on-change and a weak pull-up."+        "description": "General-purpose PORTA I/O pin RA0 with analog input ANA0, C1IN0+, DAC1OUT1, interrupt-on-change IOCA0; also the ICSP/ICD programming data pin (ICSPDAT/ICDDAT)."       },       {         "number": "17",@@ -172,19 +172,19 @@         "number": "18",         "name": "VDD",         "type": "power_in",-        "description": "Positive supply, 1.8V to 3.6V for PIC16LF184XX devices."+        "description": "Positive supply, 1.8V to 3.6V for PIC16LF184XX."       },       {         "number": "19",         "name": "RA5",         "type": "bidirectional",-        "description": "General-purpose port RA5 with analog input ANA5, T1CKI/T2IN/SMT1SIG default inputs, CLKIN/OSC1 external clock input and SOSCI secondary oscillator pin, IOCA5 interrupt-on-change and a weak pull-up."+        "description": "General-purpose PORTA I/O pin RA5 with analog input ANA5, interrupt-on-change IOCA5; also CLKIN/SOSCI/OSC1 oscillator input and default for T1CKI, T2IN and SMT1SIG."       },       {         "number": "20",         "name": "RA4",         "type": "bidirectional",-        "description": "General-purpose port RA4 with analog input ANA4, T1G and CCP4IN/SMT1WIN default inputs, CLKOUT/OSC2 oscillator output and SOSCO secondary oscillator pin, IOCA4 interrupt-on-change and a weak pull-up."+        "description": "General-purpose PORTA I/O pin RA4 with analog input ANA4, interrupt-on-change IOCA4; also CLKOUT/SOSCO/OSC2 oscillator output and default for T1G, SMT1WIN and CCP4IN."       },       {         "number": "21",@@ -204,13 +204,13 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The datasheet recommends connecting the exposed bottom pad to VSS but gives it no pin number, so it ; The brief is a family document and the pin tables are shared across PIC16(L)F184XX. MSSP2 is not ava; The part number suffix '-E' (extended temperature, -40°C to 125°C) and the 'GZ' ordering code are no",+          "extractor flagged: The exposed bottom pad of the UQFN is not numbered in the datasheet. The only guidance is a note rec; The datasheet is a product brief with no electrical characteristics table. Pin descriptions are buil",           "exposed pad 21 added from the footprint",           "vision extraction: provenance cannot be text-verified; needs consensus"         ],         "pages_sent": 18,-        "cost_usd": 0.3206,-        "at": "2026-11-12T22:12:36"+        "cost_usd": 0.3361,+        "at": "2026-11-13T02:43:56"       },       "datasheet": {         "url": "https://ww1.microchip.com/downloads/en/DeviceDoc/40001894B.pdf",@@ -247,7 +247,7 @@         "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "c9476a1612023de37f27b4972110ab6ac6dc0eaf5ac48957a2e1c497650082a5",-        "checked": "2026-11-12",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -265,8 +265,8 @@         "zmin_mm": 0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "b1c17a43fc5b77e7f9c303672aafb147dc7c0a8f454e78ff9af138822097b4ef",-        "checked": "2026-11-12",+        "sha256": "9139c19335a61ae56ac929e1b59dd4fc00d77c62c1edbe5558404508e73f679d",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ]
page.json+31−29
@@ -4,7 +4,7 @@   "slug": "pic16lf18444-e-gz",   "title": "PIC16LF18444-E/GZ",   "brief": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), UQFN-20(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -36,7 +36,7 @@       "mouser": "579-PIC16LF18444E/GZ"     },     "distributor_check": {-      "checked_at": "2026-11-12T22:12:48Z",+      "checked_at": "2026-11-13T02:44:09Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "PIC16LF18444-E/GZ-ND",@@ -51,99 +51,99 @@     "pins": [       {         "number": "1",-        "name": "RA3/MCLR/VPP",+        "name": "MCLR/VPP/RA3",         "type": "input",-        "description": "Input-only port RA3 that serves as the active-low master clear (reset) input and the programming voltage (VPP) pin, with IOCA3 interrupt-on-change and a weak pull-up."+        "description": "Input-only port pin RA3, also the active-low master clear (MCLR) reset input and the high-voltage programming input VPP."       },       {         "number": "2",         "name": "RC5",         "type": "bidirectional",-        "description": "General-purpose port RC5 with analog input ANC5, default MDCARH, T4IN and CCP1IN inputs, IOCC5 interrupt-on-change and a weak pull-up."+        "description": "General-purpose PORTC I/O pin RC5 with analog input ANC5, interrupt-on-change IOCC5 and weak pull-up; also default for CCP1IN, T4IN and MDCARH inputs."       },       {         "number": "3",         "name": "RC4",         "type": "bidirectional",-        "description": "General-purpose port RC4 with analog input ANC4, IOCC4 interrupt-on-change and a weak pull-up."+        "description": "General-purpose PORTC I/O pin RC4 with analog input ANC4, interrupt-on-change IOCC4 and weak pull-up."       },       {         "number": "4",         "name": "RC3",         "type": "bidirectional",-        "description": "General-purpose port RC3 with analog input ANC3, comparator inputs C1IN3-/C2IN3-, CCP2IN and CLCIN1 default inputs, IOCC3 interrupt-on-change and a weak pull-up."+        "description": "General-purpose PORTC I/O pin RC3 with analog input ANC3, comparator inputs C1IN3-/C2IN3-, interrupt-on-change IOCC3 and weak pull-up; also default for CCP2IN and CLCIN1."       },       {         "number": "5",         "name": "RC6",         "type": "bidirectional",-        "description": "General-purpose port RC6 with analog input ANC6, default SS1 input, IOCC6 interrupt-on-change and a weak pull-up."+        "description": "General-purpose PORTC I/O pin RC6 with analog input ANC6, interrupt-on-change IOCC6 and weak pull-up; also default for SS1."       },       {         "number": "6",         "name": "RC7",         "type": "bidirectional",-        "description": "General-purpose port RC7 with analog input ANC7, IOCC7 interrupt-on-change and a weak pull-up."+        "description": "General-purpose PORTC I/O pin RC7 with analog input ANC7, interrupt-on-change IOCC7 and weak pull-up."       },       {         "number": "7",         "name": "RB7",         "type": "bidirectional",-        "description": "General-purpose port RB7 with analog input ANB7, default T6IN and CK1 functions, IOCB7 interrupt-on-change and a weak pull-up (SDI2/SDA2 listed, but MSSP2 is not available on PIC16(L)F18444)."+        "description": "General-purpose PORTB I/O pin RB7 with analog input ANB7, interrupt-on-change IOCB7 and weak pull-up; also default for T6IN, SDI2/SDA2 and CK1."       },       {         "number": "8",         "name": "RB6",         "type": "bidirectional",-        "description": "General-purpose port RB6 with analog input ANB6, default SCK1/SCL1 function (I2C logic levels), IOCB6 interrupt-on-change and a weak pull-up."+        "description": "General-purpose PORTB I/O pin RB6 with analog input ANB6, interrupt-on-change IOCB6 and weak pull-up; also default for SCK1/SCL1."       },       {         "number": "9",         "name": "RB5",         "type": "bidirectional",-        "description": "General-purpose port RB5 with analog input ANB5, default CCP3IN, RX1/DT1 and CLCIN3 functions, IOCB5 interrupt-on-change and a weak pull-up (SCK2/SCL2 listed, but MSSP2 is not available on PIC16(L)F18444)."+        "description": "General-purpose PORTB I/O pin RB5 with analog input ANB5, interrupt-on-change IOCB5 and weak pull-up; also default for CCP3IN, SCK2/SCL2, RX1/DT1 and CLCIN3."       },       {         "number": "10",         "name": "RB4",         "type": "bidirectional",-        "description": "General-purpose port RB4 with analog input ANB4, default T5G, SDI1/SDA1 (I2C logic levels) and CLCIN2 functions, IOCB4 interrupt-on-change and a weak pull-up."+        "description": "General-purpose PORTB I/O pin RB4 with analog input ANB4, interrupt-on-change IOCB4 and weak pull-up; also default for T5G, SDI1/SDA1 and CLCIN2."       },       {         "number": "11",         "name": "RC2",         "type": "bidirectional",-        "description": "General-purpose port RC2 with analog input ANC2, ADACT trigger, comparator inputs C1IN2-/C2IN2-, MDCARL and T5CKI default inputs, IOCC2 interrupt-on-change and a weak pull-up."+        "description": "General-purpose PORTC I/O pin RC2 with analog input ANC2, ADACT, comparator inputs C1IN2-/C2IN2-, interrupt-on-change IOCC2 and weak pull-up; also default for MDCARL and T5CKI."       },       {         "number": "12",         "name": "RC1",         "type": "bidirectional",-        "description": "General-purpose port RC1 with analog input ANC1, comparator inputs C1IN1-/C2IN1-, IOCC1 interrupt-on-change and a weak pull-up."+        "description": "General-purpose PORTC I/O pin RC1 with analog input ANC1, comparator inputs C1IN1-/C2IN1-, interrupt-on-change IOCC1 and weak pull-up."       },       {         "number": "13",         "name": "RC0",         "type": "bidirectional",-        "description": "General-purpose port RC0 with analog input ANC0, comparator input C2IN0+, T3CKI/T3G default inputs, IOCC0 interrupt-on-change and a weak pull-up."+        "description": "General-purpose PORTC I/O pin RC0 with analog input ANC0, comparator input C2IN0+, interrupt-on-change IOCC0 and weak pull-up; also default for T3CKI and T3G."       },       {         "number": "14",         "name": "RA2",         "type": "bidirectional",-        "description": "General-purpose port RA2 with analog input ANA2, ADCVREF- reference, DAC1VREF-, T0CKI, CWG1IN/CWG2IN, ZCD1 and CLCIN0 functions, INT0 external interrupt, IOCA2 interrupt-on-change and a weak pull-up."+        "description": "General-purpose PORTA I/O pin RA2 with analog input ANA2, ADCVREF-, DAC1VREF-, ZCD1, T0CKI, CWG1IN/CWG2IN, CLCIN0, INT0 and interrupt-on-change IOCA2."       },       {         "number": "15",         "name": "RA1/ICSPCLK",         "type": "bidirectional",-        "description": "General-purpose port RA1 with analog input ANA1, ADCVREF+ reference, C1IN0-/C2IN0- comparator inputs, DAC1VREF+, MDSRC and SS2 default inputs, ICSPCLK/ICDCLK programming and debug clock, IOCA1 interrupt-on-change and a weak pull-up."+        "description": "General-purpose PORTA I/O pin RA1 with analog input ANA1, ADCVREF+, C1IN0-/C2IN0-, DAC1VREF+, interrupt-on-change IOCA1; also the ICSP/ICD programming clock (ICSPCLK/ICDCLK)."       },       {         "number": "16",         "name": "RA0/ICSPDAT",         "type": "bidirectional",-        "description": "General-purpose port RA0 with analog input ANA0, comparator input C1IN0+, DAC1OUT1 output, ICSPDAT/ICDDAT programming and debug data, IOCA0 interrupt-on-change and a weak pull-up."+        "description": "General-purpose PORTA I/O pin RA0 with analog input ANA0, C1IN0+, DAC1OUT1, interrupt-on-change IOCA0; also the ICSP/ICD programming data pin (ICSPDAT/ICDDAT)."       },       {         "number": "17",@@ -155,19 +155,19 @@         "number": "18",         "name": "VDD",         "type": "power_in",-        "description": "Positive supply, 1.8V to 3.6V for PIC16LF184XX devices."+        "description": "Positive supply, 1.8V to 3.6V for PIC16LF184XX."       },       {         "number": "19",         "name": "RA5",         "type": "bidirectional",-        "description": "General-purpose port RA5 with analog input ANA5, T1CKI/T2IN/SMT1SIG default inputs, CLKIN/OSC1 external clock input and SOSCI secondary oscillator pin, IOCA5 interrupt-on-change and a weak pull-up."+        "description": "General-purpose PORTA I/O pin RA5 with analog input ANA5, interrupt-on-change IOCA5; also CLKIN/SOSCI/OSC1 oscillator input and default for T1CKI, T2IN and SMT1SIG."       },       {         "number": "20",         "name": "RA4",         "type": "bidirectional",-        "description": "General-purpose port RA4 with analog input ANA4, T1G and CCP4IN/SMT1WIN default inputs, CLKOUT/OSC2 oscillator output and SOSCO secondary oscillator pin, IOCA4 interrupt-on-change and a weak pull-up."+        "description": "General-purpose PORTA I/O pin RA4 with analog input ANA4, interrupt-on-change IOCA4; also CLKOUT/SOSCO/OSC2 oscillator output and default for T1G, SMT1WIN and CCP4IN."       },       {         "number": "21",@@ -187,13 +187,13 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The datasheet recommends connecting the exposed bottom pad to VSS but gives it no pin number, so it ; The brief is a family document and the pin tables are shared across PIC16(L)F184XX. MSSP2 is not ava; The part number suffix '-E' (extended temperature, -40°C to 125°C) and the 'GZ' ordering code are no",+          "extractor flagged: The exposed bottom pad of the UQFN is not numbered in the datasheet. The only guidance is a note rec; The datasheet is a product brief with no electrical characteristics table. Pin descriptions are buil",           "exposed pad 21 added from the footprint",           "vision extraction: provenance cannot be text-verified; needs consensus"         ],         "pages_sent": 18,-        "cost_usd": 0.3206,-        "at": "2026-11-12T22:12:36"+        "cost_usd": 0.3361,+        "at": "2026-11-13T02:43:56"       },       "datasheet": {         "url": "https://ww1.microchip.com/downloads/en/DeviceDoc/40001894B.pdf",@@ -230,7 +230,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "c9476a1612023de37f27b4972110ab6ac6dc0eaf5ac48957a2e1c497650082a5",-        "checked": "2026-11-12",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -248,8 +248,8 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "b1c17a43fc5b77e7f9c303672aafb147dc7c0a8f454e78ff9af138822097b4ef",-        "checked": "2026-11-12",+        "sha256": "9139c19335a61ae56ac929e1b59dd4fc00d77c62c1edbe5558404508e73f679d",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ]@@ -355,5 +355,7 @@   ],   "visibility": {     "public": true-  }+  },+  "description": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), UQFN-20(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file
pic16lf18444-e-gz-hero.glb
⋯ 1 unchanged line ⋯
pic16lf18444-e-gz-hero.overlay.json+535−540
@@ -1,542 +1,537 @@ {- "spec": "adom-hero 1.4",- "mpn": "PIC16LF18444-E",- "kind": "component + footprint reference art",- "board_use": false,- "plane_z_mm": -0.02,- "units": "metre",- "upAxis": "Z",- "layers": {-  "pad_outlines": {-   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",-   "rgba": [-    0.0,-    0.902,-    0.863,-    0.5-   ],-   "pads": 21,-   "span_mm": 6.375,-   "dash_mm": 0.1594,-   "gap_mm": 0.0956,-   "pad_stroke_mm": 0.0382-  },-  "silkscreen": {-   "material": "Silkscreen reference lines - 30 percent opacity",-   "rgba": [-    0.92,-    0.96,-    1.0,-    0.3-   ],-   "footprint_items": 9,-   "pin1": {-    "source": "footprint silkscreen",-    "pad": "1"-   }-  },-  "signal_names": {-   "material": "Signal names - 50 percent opacity",-   "rgba": [-    0.92,-    0.96,-    1.0,-    0.5-   ],-   "font": "DejaVu Sans Mono",-   "labels": 20,-   "sides": "top + mirrored underside (single-sided)",-   "omitted": null,-   "fallback_to_pad_number": 0-  }- },- "align": {-  "ok": true,-  "board_underside": true,-  "electrical_pads_without_contact": [],-  "mounting_pads_left_out": [],-  "centre_offset_mm": 0.0,-  "over_pads": false,-  "tolerance_mm": 0.376,-  "orientation_flipped": false,-  "contacts_bbox_mm": [-   -2.0,-   2.0,-   -2.0,-   2.0-  ],-  "pads_bbox_mm": [-   -2.35,-   2.35,-   -2.35,-   2.35+  "spec": "adom-hero 1.4",+  "mpn": "PIC16LF18444-E/GZ",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 21,+      "span_mm": 6.375,+      "dash_mm": 0.1594,+      "gap_mm": 0.0956,+      "pad_stroke_mm": 0.0382+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 9,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 20,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.376,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -2.0,+      2.0,+      -2.0,+      2.0+    ],+    "pads_bbox_mm": [+      -2.35,+      2.35,+      -2.35,+      2.35+    ],+    "seating_z_mm": -0.0+  },+  "sources": {+    "glb": "pic16lf18444-e-gz-etched.glb",+    "glb_sha256": "af4dc3758914c94f42cac17f4a2f6e7de22feb55757731458c9cbe880f00a34b",+    "footprint": "pic16lf18444-e-gz.kicad_mod",+    "footprint_sha256": "ad6e4836412ca5dd309346710582478a978b7c0ff31d78fb456c167ba4c30042",+    "pins": "page.json component.pins",+    "pins_sha256": "93267aa77cfd3afef4e47feb3d4abbae2f561dc88b1558d00e499d885d130412"+  },+  "generator": "adom-wiki 1.8.24 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "MCLR/VPP/RA3",+      "x": -3.04,+      "y": -1.0,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "2",+      "text": "RC5",+      "x": -2.45,+      "y": -0.5,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "3",+      "text": "RC4",+      "x": -2.45,+      "y": 0.0,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "4",+      "text": "RC3",+      "x": -2.45,+      "y": 0.5,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "5",+      "text": "RC6",+      "x": -2.45,+      "y": 1.0,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "6",+      "text": "RC7",+      "x": -1.0,+      "y": 2.45,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "7",+      "text": "RB7",+      "x": -0.5,+      "y": 2.45,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "8",+      "text": "RB6",+      "x": 0.0,+      "y": 2.45,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "9",+      "text": "RB5",+      "x": 0.5,+      "y": 2.45,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "10",+      "text": "RB4",+      "x": 1.0,+      "y": 2.45,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "11",+      "text": "RC2",+      "x": 2.45,+      "y": 1.0,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "12",+      "text": "RC1",+      "x": 2.45,+      "y": 0.5,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "13",+      "text": "RC0",+      "x": 2.45,+      "y": 0.0,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "14",+      "text": "RA2",+      "x": 2.45,+      "y": -0.5,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "15",+      "text": "RA1/ICSPCLK",+      "x": 2.45,+      "y": -1.0,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "16",+      "text": "RA0/ICSPDAT",+      "x": 1.0,+      "y": -2.45,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "17",+      "text": "VSS",+      "x": 0.5,+      "y": -2.45,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "18",+      "text": "VDD",+      "x": 0.0,+      "y": -2.45,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "19",+      "text": "RA5",+      "x": -0.5,+      "y": -2.45,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "20",+      "text": "RA4",+      "x": -1.0,+      "y": -2.45,+      "align": "left",+      "vertical": true,+      "h": 0.25+    }   ],-  "seating_z_mm": -0.0- },- "sources": {-  "glb": "pic16lf18444-e-gz-etched.glb",-  "glb_sha256": "af4dc3758914c94f42cac17f4a2f6e7de22feb55757731458c9cbe880f00a34b",-  "footprint": "pic16lf18444-e-gz.kicad_mod",-  "footprint_sha256": "ad6e4836412ca5dd309346710582478a978b7c0ff31d78fb456c167ba4c30042",-  "pins": "page.json component.pins",-  "pins_sha256": "b136252e8b573012e2b9b412cde948d9cb38cac1bd3ab2520b0ba20fdc4e69a2"- },- "generator": "factory/hero_glb.py",- "labels": [-  {-   "pad": "1",-   "text": "RA3/MCLR/VPP",-   "x": -3.04,-   "y": -1.0,-   "align": "right",-   "vertical": false,-   "h": 0.25-  },-  {-   "pad": "2",-   "text": "RC5",-   "x": -2.45,-   "y": -0.5,-   "align": "right",-   "vertical": false,-   "h": 0.25-  },-  {-   "pad": "3",-   "text": "RC4",-   "x": -2.45,-   "y": 0.0,-   "align": "right",-   "vertical": false,-   "h": 0.25-  },-  {-   "pad": "4",-   "text": "RC3",-   "x": -2.45,-   "y": 0.5,-   "align": "right",-   "vertical": false,-   "h": 0.25-  },-  {-   "pad": "5",-   "text": "RC6",-   "x": -2.45,-   "y": 1.0,-   "align": "right",-   "vertical": false,-   "h": 0.25-  },-  {-   "pad": "6",-   "text": "RC7",-   "x": -1.0,-   "y": 2.45,-   "align": "right",-   "vertical": true,-   "h": 0.25-  },-  {-   "pad": "7",-   "text": "RB7",-   "x": -0.5,-   "y": 2.45,-   "align": "right",-   "vertical": true,-   "h": 0.25-  },-  {-   "pad": "8",-   "text": "RB6",-   "x": 0.0,-   "y": 2.45,-   "align": "right",-   "vertical": true,-   "h": 0.25-  },-  {-   "pad": "9",-   "text": "RB5",-   "x": 0.5,-   "y": 2.45,-   "align": "right",-   "vertical": true,-   "h": 0.25-  },-  {-   "pad": "10",-   "text": "RB4",-   "x": 1.0,-   "y": 2.45,-   "align": "right",-   "vertical": true,-   "h": 0.25-  },-  {-   "pad": "11",-   "text": "RC2",-   "x": 2.45,-   "y": 1.0,-   "align": "left",-   "vertical": false,-   "h": 0.25-  },-  {-   "pad": "12",-   "text": "RC1",-   "x": 2.45,-   "y": 0.5,-   "align": "left",-   "vertical": false,-   "h": 0.25-  },-  {-   "pad": "13",-   "text": "RC0",-   "x": 2.45,-   "y": 0.0,-   "align": "left",-   "vertical": false,-   "h": 0.25-  },-  {-   "pad": "14",-   "text": "RA2",-   "x": 2.45,-   "y": -0.5,-   "align": "left",-   "vertical": false,-   "h": 0.25-  },-  {-   "pad": "15",-   "text": "RA1/ICSPCLK",-   "x": 2.45,-   "y": -1.0,-   "align": "left",-   "vertical": false,-   "h": 0.25-  },-  {-   "pad": "16",-   "text": "RA0/ICSPDAT",-   "x": 1.0,-   "y": -2.45,-   "align": "left",-   "vertical": true,-   "h": 0.25-  },-  {-   "pad": "17",-   "text": "VSS",-   "x": 0.5,-   "y": -2.45,-   "align": "left",-   "vertical": true,-   "h": 0.25-  },-  {-   "pad": "18",-   "text": "VDD",-   "x": 0.0,-   "y": -2.45,-   "align": "left",-   "vertical": true,-   "h": 0.25-  },-  {-   "pad": "19",-   "text": "RA5",-   "x": -0.5,-   "y": -2.45,-   "align": "left",-   "vertical": true,-   "h": 0.25-  },-  {-   "pad": "20",-   "text": "RA4",-   "x": -1.0,-   "y": -2.45,-   "align": "left",-   "vertical": true,-   "h": 0.25-  }- ],- "pads": [-  {-   "number": "1",-   "shape": "roundrect",-   "center_mm": [-    -1.9375,-    -1.0-   ],-   "size_mm": [-    0.825,-    0.25-   ],-   "rot": 0.0-  },-  {-   "number": "2",-   "shape": "roundrect",-   "center_mm": [-    -1.9375,-    -0.5-   ],-   "size_mm": [-    0.825,-    0.25-   ],-   "rot": 0.0-  },-  {-   "number": "3",-   "shape": "roundrect",-   "center_mm": [-    -1.9375,-    0.0-   ],-   "size_mm": [-    0.825,-    0.25-   ],-   "rot": 0.0-  },-  {-   "number": "4",-   "shape": "roundrect",-   "center_mm": [-    -1.9375,-    0.5-   ],-   "size_mm": [-    0.825,-    0.25-   ],-   "rot": 0.0-  },-  {-   "number": "5",-   "shape": "roundrect",-   "center_mm": [-    -1.9375,-    1.0-   ],-   "size_mm": [-    0.825,-    0.25-   ],-   "rot": 0.0-  },-  {-   "number": "6",-   "shape": "roundrect",-   "center_mm": [-    -1.0,-    1.9375-   ],-   "size_mm": [-    0.25,-    0.825-   ],-   "rot": 0.0-  },-  {-   "number": "7",-   "shape": "roundrect",-   "center_mm": [-    -0.5,-    1.9375-   ],-   "size_mm": [-    0.25,-    0.825-   ],-   "rot": 0.0-  },-  {-   "number": "8",-   "shape": "roundrect",-   "center_mm": [-    0.0,-    1.9375-   ],-   "size_mm": [-    0.25,-    0.825-   ],-   "rot": 0.0-  },-  {-   "number": "9",-   "shape": "roundrect",-   "center_mm": [-    0.5,-    1.9375-   ],-   "size_mm": [-    0.25,-    0.825-   ],-   "rot": 0.0-  },-  {-   "number": "10",-   "shape": "roundrect",-   "center_mm": [-    1.0,-    1.9375-   ],-   "size_mm": [-    0.25,-    0.825-   ],-   "rot": 0.0-  },-  {-   "number": "11",-   "shape": "roundrect",-   "center_mm": [-    1.9375,-    1.0-   ],-   "size_mm": [-    0.825,-    0.25-   ],-   "rot": 0.0-  },-  {-   "number": "12",-   "shape": "roundrect",-   "center_mm": [-    1.9375,-    0.5-   ],-   "size_mm": [-    0.825,-    0.25-   ],-   "rot": 0.0-  },-  {-   "number": "13",-   "shape": "roundrect",-   "center_mm": [-    1.9375,-    0.0-   ],-   "size_mm": [-    0.825,-    0.25-   ],-   "rot": 0.0-  },-  {-   "number": "14",-   "shape": "roundrect",-   "center_mm": [-    1.9375,-    -0.5-   ],-   "size_mm": [-    0.825,-    0.25-   ],-   "rot": 0.0-  },-  {-   "number": "15",-   "shape": "roundrect",-   "center_mm": [-    1.9375,-    -1.0-   ],-   "size_mm": [-    0.825,-    0.25-   ],-   "rot": 0.0-  },-  {-   "number": "16",-   "shape": "roundrect",-   "center_mm": [-    1.0,-    -1.9375-   ],-   "size_mm": [-    0.25,-    0.825-   ],-   "rot": 0.0-  },-  {-   "number": "17",-   "shape": "roundrect",-   "center_mm": [-    0.5,-    -1.9375-   ],-   "size_mm": [-    0.25,-    0.825-   ],-   "rot": 0.0-  },-  {-   "number": "18",-   "shape": "roundrect",-   "center_mm": [-    0.0,-    -1.9375-   ],-   "size_mm": [-    0.25,-    0.825-   ],-   "rot": 0.0-  },-  {-   "number": "19",-   "shape": "roundrect",-   "center_mm": [-    -0.5,-    -1.9375-   ],-   "size_mm": [-    0.25,-    0.825-   ],-   "rot": 0.0-  },-  {-   "number": "20",-   "shape": "roundrect",-   "center_mm": [-    -1.0,-    -1.9375-   ],-   "size_mm": [-    0.25,-    0.825-   ],-   "rot": 0.0-  },-  {-   "number": "21",-   "shape": "rect",-   "center_mm": [-    0.0,-    0.0-   ],-   "size_mm": [-    2.5,-    2.5-   ],-   "rot": 0.0-  }- ]-}\ No newline at end of file+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -1.9375,+        -1.0+      ],+      "size_mm": [+        0.825,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -1.9375,+        -0.5+      ],+      "size_mm": [+        0.825,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -1.9375,+        0.0+      ],+      "size_mm": [+        0.825,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        -1.9375,+        0.5+      ],+      "size_mm": [+        0.825,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        -1.9375,+        1.0+      ],+      "size_mm": [+        0.825,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "6",+      "shape": "roundrect",+      "center_mm": [+        -1.0,+        1.9375+      ],+      "size_mm": [+        0.25,+        0.825+      ],+      "rot": 0.0+    },+    {+      "number": "7",+      "shape": "roundrect",+      "center_mm": [+        -0.5,+        1.9375+      ],+      "size_mm": [+        0.25,+        0.825+      ],+      "rot": 0.0+    },+    {+      "number": "8",+      "shape": "roundrect",+      "center_mm": [+        0.0,+        1.9375+      ],+      "size_mm": [+        0.25,+        0.825+      ],+      "rot": 0.0+    },+    {+      "number": "9",+      "shape": "roundrect",+      "center_mm": [+        0.5,+        1.9375+      ],+      "size_mm": [+        0.25,+        0.825+      ],+      "rot": 0.0+    },+    {+      "number": "10",+      "shape": "roundrect",+      "center_mm": [+        1.0,+        1.9375+      ],+      "size_mm": [+        0.25,+        0.825+      ],+      "rot": 0.0+    },+    {+      "number": "11",+      "shape": "roundrect",+      "center_mm": [+        1.9375,+        1.0+      ],+      "size_mm": [+        0.825,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "12",+      "shape": "roundrect",+      "center_mm": [+        1.9375,+        0.5+      ],+      "size_mm": [+        0.825,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "13",+      "shape": "roundrect",+      "center_mm": [+        1.9375,+        0.0+      ],+      "size_mm": [+        0.825,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "14",+      "shape": "roundrect",+      "center_mm": [+        1.9375,+        -0.5+      ],+      "size_mm": [+        0.825,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "15",+      "shape": "roundrect",+      "center_mm": [+        1.9375,+        -1.0+      ],+      "size_mm": [+        0.825,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "16",+      "shape": "roundrect",+      "center_mm": [+        1.0,+        -1.9375+      ],+      "size_mm": [+        0.25,+        0.825+      ],+      "rot": 0.0+    },+    {+      "number": "17",+      "shape": "roundrect",+      "center_mm": [+        0.5,+        -1.9375+      ],+      "size_mm": [+        0.25,+        0.825+      ],+      "rot": 0.0+    },+    {+      "number": "18",+      "shape": "roundrect",+      "center_mm": [+        0.0,+        -1.9375+      ],+      "size_mm": [+        0.25,+        0.825+      ],+      "rot": 0.0+    },+    {+      "number": "19",+      "shape": "roundrect",+      "center_mm": [+        -0.5,+        -1.9375+      ],+      "size_mm": [+        0.25,+        0.825+      ],+      "rot": 0.0+    },+    {+      "number": "20",+      "shape": "roundrect",+      "center_mm": [+        -1.0,+        -1.9375+      ],+      "size_mm": [+        0.25,+        0.825+      ],+      "rot": 0.0+    },+    {+      "number": "21",+      "shape": "rect",+      "center_mm": [+        0.0,+        0.0+      ],+      "size_mm": [+        2.5,+        2.5+      ],+      "rot": 0.0+    }+  ]+}
pic16lf18444-e-gz.kicad_sym+1−1
@@ -9,7 +9,7 @@     )     (symbol "PIC16LF18444-E_1_1"     (pin input line (at -17.78 12.70 0) (length 5.08)-      (name "RA3/MCLR/VPP" (effects (font (size 1.27 1.27))))+      (name "MCLR/VPP/RA3" (effects (font (size 1.27 1.27))))       (number "1" (effects (font (size 1.27 1.27))))     )     (pin bidirectional line (at -17.78 10.16 0) (length 5.08)
pic16lf18444-e-gz.lbr+16−5
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), UQFN-20(4x4). Pinout cross-checked by two models against the datasheet</description> <packages> <package name="QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm">   <description>QFN-20-1EP, 4 x 4 mm, 0.5 mm pitch</description>@@ -101,13 +101,14 @@ </packages> <symbols> <symbol name="PIC16LF18444-E">+  <description>Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), UQFN-20(4x4). Pinout cross-checked by two models against the datasheet</description>   <wire x1="-12.7" y1="15.24" x2="12.7" y2="15.24" width="0.254" layer="94"/>   <wire x1="12.7" y1="15.24" x2="12.7" y2="-15.24" width="0.254" layer="94"/>   <wire x1="12.7" y1="-15.24" x2="-12.7" y2="-15.24" width="0.254" layer="94"/>   <wire x1="-12.7" y1="-15.24" x2="-12.7" y2="15.24" width="0.254" layer="94"/>   <text x="0.0000" y="17.7800" size="1.27" layer="95" align="center">&gt;NAME</text>   <text x="0.0000" y="-17.7800" size="1.27" layer="96" align="center">&gt;VALUE</text>-  <pin name="RA3/MCLR/VPP" x="-17.78" y="12.7" length="middle" direction="in"/>+  <pin name="MCLR/VPP/RA3" x="-17.78" y="12.7" length="middle" direction="in"/>   <pin name="RC5" x="-17.78" y="10.16" length="middle" direction="io"/>   <pin name="RC4" x="-17.78" y="7.62" length="middle" direction="io"/>   <pin name="RC3" x="-17.78" y="5.08" length="middle" direction="io"/>@@ -132,14 +133,14 @@ </symbols> <devicesets> <deviceset name="PIC16LF18444-E" prefix="U">-  <description></description>+  <description>Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), UQFN-20(4x4). Pinout cross-checked by two models against the datasheet</description>   <gates>     <gate name="G$1" symbol="PIC16LF18444-E" x="0" y="0"/>   </gates>   <devices>     <device name="" package="QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm">       <connects>-        <connect gate="G$1" pin="RA3/MCLR/VPP" pad="1"/>+        <connect gate="G$1" pin="MCLR/VPP/RA3" pad="1"/>         <connect gate="G$1" pin="RC5" pad="2"/>         <connect gate="G$1" pin="RC4" pad="3"/>         <connect gate="G$1" pin="RC3" pad="4"/>@@ -161,7 +162,17 @@         <connect gate="G$1" pin="RC0" pad="13"/>         <connect gate="G$1" pin="RC1" pad="12"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="PIC16LF18444-E/GZ" constant="no"/>+          <attribute name="MANUFACTURER" value="Microchip Tech" constant="no"/>+          <attribute name="DATASHEET" value="https://ww1.microchip.com/downloads/en/DeviceDoc/40001894B.pdf" constant="no"/>+          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/pic16lf18444-e-gz" constant="no"/>+          <attribute name="MOUSER_PN" value="579-PIC16LF18444E/GZ" constant="no"/>+          <attribute name="DIGIKEY_PN" value="PIC16LF18444-E/GZ-ND" constant="no"/>+          <attribute name="LCSC_PN" value="C638128" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>