component
PIC16LF1823-I
Public Made by Adomby adom
Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC16LF1823-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TSSOP-14
PIC16LF1823-I from Microchip Tech, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply, 1.8V to 3.6V for the PIC16LF1823. |
| 2 | RA5 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, also T1CKI/T1OSI, OSC1 and CLKIN. |
| 3 | RA4 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, also AN3, CPS3, T1G, T1OSO, SDO, OSC2, CLKOUT and CLKR. |
| 4 | RA3 | input | Input-only pin with interrupt-on-change and weak pull-up, also MCLR, VPP, T1G and SS. |
| 5 | RC5 | bidirectional | General-purpose I/O with weak pull-up, also CCP1, P1A, RX/DT and MDCIN2. |
| 6 | RC4 | bidirectional | General-purpose I/O with weak pull-up, also C2OUT, SRNQ, P1B, TX/CK and MDOUT. |
| 7 | RC3 | bidirectional | General-purpose I/O with weak pull-up, also AN7, CPS7, C12IN3-, SS and MDMIN. |
| 8 | RC2 | bidirectional | General-purpose I/O with weak pull-up, also AN6, CPS6, C12IN2-, SDO and MDCIN1. |
| 9 | RC1 | bidirectional | General-purpose I/O with weak pull-up, also AN5, CPS5, C12IN1-, SDA and SDI. |
| 10 | RC0 | bidirectional | General-purpose I/O with weak pull-up, also AN4, CPS4, C2IN+, SCL and SCK. |
| 11 | RA2 | bidirectional | General-purpose I/O with weak pull-up, also AN2, CPS2, C1OUT, SRQ, T0CKI, FLT0 and INT/interrupt-on-change. |
| 12 | RA1 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, also AN1, VREF, CPS1, C12IN0-, SRI, RX/DT and ICSPCLK/ICDCLK. |
| 13 | RA0 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, also AN0, DACOUT, CPS0, C1IN+, TX/CK and ICSPDAT/ICDDAT. |
| 14 | VSS | power_in | Ground reference. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TSSOP-14 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage range (LF devices) | VDD | 1.8 | 3.6 | V | PIC1XLF182X | 1 | |
| Clock input frequency | 0 | 32 | MHz | DC, 32 MHz clock input | 1 | ||
| Internal oscillator calibration accuracy | 1 | % | Factory calibrated to ±1%, typical | 1 | |||
| Standby current | 30 | nA | @ 1.8V, PIC1XLF182X | 1 | |||
| Operating current | 75 | µA | @ 1 MHz, 1.8V, PIC1XLF182X | 1 | |||
| Low-power watchdog timer current | 500 | nA | @ 1.8V, PIC1XLF182X | 1 |
CAD (KiCad official)
- Symbol:
PIC16LF1823-I - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
pic16lf1823-i-etched.step/pic16lf1823-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16lf1823-i.step/pic16lf1823-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (10 pp, sha256
9aeee263ecfd8d2c, retrieved 2026-10-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).