main
Ray
Publish 0.1.0
1400d08
PIC16LF1713-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil
PIC16LF1713-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE3/MCLR/VPP | input | Input-only port pin RE3, also the active-low master clear (MCLR) reset input and the high-voltage programming input VPP. |
| 2 | RA0 | bidirectional | General-purpose I/O RA0 with ADC channel AN0, CLCIN0 default input, interrupt-on-change and weak pull-up. |
| 3 | RA1 | bidirectional | General-purpose I/O RA1 with ADC channel AN1, OPA1OUT op amp output, CLCIN1 default input, interrupt-on-change and weak pull-up. |
| 4 | RA2 | bidirectional | General-purpose I/O RA2 with ADC channel AN2, Vref- reference input, DAC1OUT1 output, interrupt-on-change and weak pull-up. |
| 5 | RA3 | bidirectional | General-purpose I/O RA3 with ADC channel AN3, Vref+ reference input, interrupt-on-change and weak pull-up. |
| 6 | RA4 | bidirectional | General-purpose I/O RA4 with OPA1IN+ op amp input, T0CKI default input, interrupt-on-change and weak pull-up. |
| 7 | RA5 | bidirectional | General-purpose I/O RA5 with ADC channel AN4, OPA1IN- op amp input, DAC2OUT1 output, nSS default input, interrupt-on-change and weak pull-up. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | RA7 | bidirectional | General-purpose I/O RA7 with NCOCLK input, interrupt-on-change, and oscillator OSC1/CLKIN function. |
| 10 | RA6 | bidirectional | General-purpose I/O RA6 with interrupt-on-change and oscillator OSC2/CLKOUT function. |
| 11 | RC0 | bidirectional | General-purpose I/O RC0 with T1CKI default input, SOSCO secondary oscillator output, interrupt-on-change and weak pull-up. |
| 12 | RC1 | bidirectional | General-purpose I/O RC1 with SOSCI secondary oscillator input, interrupt-on-change and weak pull-up. |
| 13 | RC2 | bidirectional | General-purpose I/O RC2 with ADC channel AN14, interrupt-on-change and weak pull-up. |
| 14 | RC3 | bidirectional | General-purpose I/O RC3 with ADC channel AN15, SCK default (bidirectional SCK/SCL) MSSP clock, interrupt-on-change and weak pull-up. |
| 15 | RC4 | bidirectional | General-purpose I/O RC4 with ADC channel AN16, interrupt-on-change and weak pull-up; SDI/SDA MSSP data function. |
| 16 | RC5 | bidirectional | General-purpose I/O RC5 with ADC channel AN17, interrupt-on-change and weak pull-up. |
| 17 | RC6 | bidirectional | General-purpose I/O RC6 with ADC channel AN18, interrupt-on-change and weak pull-up. |
| 18 | RC7 | bidirectional | General-purpose I/O RC7 with ADC channel AN19, interrupt-on-change and weak pull-up. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply; 1.8V to 3.6V for the PIC16LF170X/171X. |
| 21 | RB0 | bidirectional | General-purpose I/O RB0 with ADC channel AN12, ZCD zero-cross detect, INT default input and interrupt-on-change. |
| 22 | RB1 | bidirectional | General-purpose I/O RB1 with ADC channel AN10, OPA2OUT op amp output and interrupt-on-change. |
| 23 | RB2 | bidirectional | General-purpose I/O RB2 with ADC channel AN8, OPA2IN- op amp input and interrupt-on-change. |
| 24 | RB3 | bidirectional | General-purpose I/O RB3 with ADC channel AN9, OPA2IN+ op amp input and interrupt-on-change. |
| 25 | RB4 | bidirectional | General-purpose I/O RB4 with ADC channel AN11, interrupt-on-change and weak pull-up. |
| 26 | RB5 | bidirectional | General-purpose I/O RB5 with ADC channel AN13, T1G default input, interrupt-on-change and weak pull-up. |
| 27 | RB6/ICSPCLK | bidirectional | General-purpose I/O RB6 with SCL and CLCIN2 default inputs, interrupt-on-change, weak pull-up, and ICSP programming clock. |
| 28 | RB7/ICSPDAT | bidirectional | General-purpose I/O RB7 with DAC1OUT2 and DAC2OUT2 outputs, CLCIN3 default input, interrupt-on-change, weak pull-up, and ICSP programming data. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range (PIC16LF170X/171X) | VDD | 1.8 | 3.6 | V | PIC16LF170X/171X | 1 | |
| Operating Temperature, Industrial | -40 | 85 | °C | Industrial | 1 | ||
| Clock input frequency | 0 | 32 | MHz | Operating speed, clock input | 1 | ||
| Sleep mode current | 50 | nA | @ 1.8V, typical | 1 | |||
| Watchdog Timer current | 500 | nA | @ 1.8V, typical | 1 | |||
| Operating current at 32 kHz | 8 | uA | @ 32 kHz, 1.8V, typical | 1 | |||
| Operating current per MHz | 32 | uA/MHz | @ 1.8V, typical | 1 | |||
| Internal oscillator accuracy at calibration | -1 | 1 | % | 16 MHz internal oscillator block, at calibration | 2 | ||
| Minimum instruction cycle | 125 | ns | 1 |
CAD (KiCad official)
- Symbol:
PIC16LF1713-I - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
pic16lf1713-i-etched.step/pic16lf1713-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16lf1713-i.step/pic16lf1713-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (18 pp, sha256
91827b6a20ffbd6f, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PIC16LF1713-I
**Microchip Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil
PIC16LF1713-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE3/MCLR/VPP | input | Input-only port pin RE3, also the active-low master clear (MCLR) reset input and the high-voltage programming input VPP. |
| 2 | RA0 | bidirectional | General-purpose I/O RA0 with ADC channel AN0, CLCIN0 default input, interrupt-on-change and weak pull-up. |
| 3 | RA1 | bidirectional | General-purpose I/O RA1 with ADC channel AN1, OPA1OUT op amp output, CLCIN1 default input, interrupt-on-change and weak pull-up. |
| 4 | RA2 | bidirectional | General-purpose I/O RA2 with ADC channel AN2, Vref- reference input, DAC1OUT1 output, interrupt-on-change and weak pull-up. |
| 5 | RA3 | bidirectional | General-purpose I/O RA3 with ADC channel AN3, Vref+ reference input, interrupt-on-change and weak pull-up. |
| 6 | RA4 | bidirectional | General-purpose I/O RA4 with OPA1IN+ op amp input, T0CKI default input, interrupt-on-change and weak pull-up. |
| 7 | RA5 | bidirectional | General-purpose I/O RA5 with ADC channel AN4, OPA1IN- op amp input, DAC2OUT1 output, nSS default input, interrupt-on-change and weak pull-up. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | RA7 | bidirectional | General-purpose I/O RA7 with NCOCLK input, interrupt-on-change, and oscillator OSC1/CLKIN function. |
| 10 | RA6 | bidirectional | General-purpose I/O RA6 with interrupt-on-change and oscillator OSC2/CLKOUT function. |
| 11 | RC0 | bidirectional | General-purpose I/O RC0 with T1CKI default input, SOSCO secondary oscillator output, interrupt-on-change and weak pull-up. |
| 12 | RC1 | bidirectional | General-purpose I/O RC1 with SOSCI secondary oscillator input, interrupt-on-change and weak pull-up. |
| 13 | RC2 | bidirectional | General-purpose I/O RC2 with ADC channel AN14, interrupt-on-change and weak pull-up. |
| 14 | RC3 | bidirectional | General-purpose I/O RC3 with ADC channel AN15, SCK default (bidirectional SCK/SCL) MSSP clock, interrupt-on-change and weak pull-up. |
| 15 | RC4 | bidirectional | General-purpose I/O RC4 with ADC channel AN16, interrupt-on-change and weak pull-up; SDI/SDA MSSP data function. |
| 16 | RC5 | bidirectional | General-purpose I/O RC5 with ADC channel AN17, interrupt-on-change and weak pull-up. |
| 17 | RC6 | bidirectional | General-purpose I/O RC6 with ADC channel AN18, interrupt-on-change and weak pull-up. |
| 18 | RC7 | bidirectional | General-purpose I/O RC7 with ADC channel AN19, interrupt-on-change and weak pull-up. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply; 1.8V to 3.6V for the PIC16LF170X/171X. |
| 21 | RB0 | bidirectional | General-purpose I/O RB0 with ADC channel AN12, ZCD zero-cross detect, INT default input and interrupt-on-change. |
| 22 | RB1 | bidirectional | General-purpose I/O RB1 with ADC channel AN10, OPA2OUT op amp output and interrupt-on-change. |
| 23 | RB2 | bidirectional | General-purpose I/O RB2 with ADC channel AN8, OPA2IN- op amp input and interrupt-on-change. |
| 24 | RB3 | bidirectional | General-purpose I/O RB3 with ADC channel AN9, OPA2IN+ op amp input and interrupt-on-change. |
| 25 | RB4 | bidirectional | General-purpose I/O RB4 with ADC channel AN11, interrupt-on-change and weak pull-up. |
| 26 | RB5 | bidirectional | General-purpose I/O RB5 with ADC channel AN13, T1G default input, interrupt-on-change and weak pull-up. |
| 27 | RB6/ICSPCLK | bidirectional | General-purpose I/O RB6 with SCL and CLCIN2 default inputs, interrupt-on-change, weak pull-up, and ICSP programming clock. |
| 28 | RB7/ICSPDAT | bidirectional | General-purpose I/O RB7 with DAC1OUT2 and DAC2OUT2 outputs, CLCIN3 default input, interrupt-on-change, weak pull-up, and ICSP programming data. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range (PIC16LF170X/171X) | VDD | 1.8 | | 3.6 | V | PIC16LF170X/171X | 1 |
| Operating Temperature, Industrial | | -40 | | 85 | °C | Industrial | 1 |
| Clock input frequency | | 0 | | 32 | MHz | Operating speed, clock input | 1 |
| Sleep mode current | | | 50 | | nA | @ 1.8V, typical | 1 |
| Watchdog Timer current | | | 500 | | nA | @ 1.8V, typical | 1 |
| Operating current at 32 kHz | | | 8 | | uA | @ 32 kHz, 1.8V, typical | 1 |
| Operating current per MHz | | | 32 | | uA/MHz | @ 1.8V, typical | 1 |
| Internal oscillator accuracy at calibration | | -1 | | 1 | % | 16 MHz internal oscillator block, at calibration | 2 |
| Minimum instruction cycle | | 125 | | | ns | | 1 |
## CAD (KiCad official)
- Symbol: `PIC16LF1713-I`
- Footprint: `Package_SO:SSOP-28_5.3x10.2mm_P0.65mm`
- 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files: `pic16lf1713-i-etched.step` / `pic16lf1713-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic16lf1713-i.step` / `pic16lf1713-i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/pic16lf1713-i-datasheet.pdf) (18 pp, sha256 `91827b6a20ffbd6f`, retrieved 2026-10-31, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic16lf1713-i-datasheet.pdf)