Generated by kicad-footprint-generator · KiCad file format 20260206
PIC16LF1503-E/ST
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TSSOP-14
PIC16LF1503-E from Microchip Tech, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply pin (VDD) for the device. |
| 2 | RA5 | bidirectional | General purpose I/O (TTL input, CMOS output) that is also the CLKIN external clock input, T1CKI, NCO1CLK and CLC1IN1 when those functions are used. |
| 3 | RA4 | bidirectional | General purpose I/O (TTL input, CMOS output) that is also AN3, CLKOUT (FOSC/4), and the alternate NCO1, SDO and T1G functions selected through APFCON. |
| 4 | RA3 | input | Input-only general purpose pin that is also the MCLR input with internal pull-up and the VPP programming voltage pin, with alternate CLC1IN0, T1G and SS functions. |
| 5 | RC5 | bidirectional | General purpose I/O (TTL input, CMOS output) that is also the PWM1 output, the CWG1A primary output, and the alternate CLC1 output selected through APFCON. |
| 6 | RC4 | bidirectional | General purpose I/O (TTL input, CMOS output) that is also the C2OUT comparator 2 output, the CLC2IN1 input, and the CWG1B complementary output. |
| 7 | RC3 | bidirectional | General purpose I/O (TTL input, CMOS output) that is also AN7, the C1IN3- and C2IN3- comparator inputs, PWM2 output, CLC2IN0 input and SS slave select input. |
| 8 | RC2 | bidirectional | General purpose I/O (TTL input, CMOS output) that is also AN6, the C1IN2- and C2IN2- comparator inputs, and the SDO SPI data output (alternate via APFCON). |
| 9 | RC1 | bidirectional | General purpose I/O (TTL input, CMOS output) that is also AN5, the C1IN1- and C2IN1- comparator inputs, PWM4 output, and the SDA (I2C open-drain data) and SDI (SPI data input) functions. |
| 10 | RC0 | bidirectional | General purpose I/O (TTL input, CMOS output) that is also AN4, the C2IN+ comparator input, the CLC2 output, and the SCL (I2C open-drain clock) and SCK (SPI clock) functions. |
| 11 | RA2 | bidirectional | General purpose I/O (ST input, CMOS output) that is also AN2, the C1OUT comparator output, DACOUT2, T0CKI, INT external interrupt, PWM3, CLC1 output and CWG1FLT fault input. |
| 12 | RA1 | bidirectional | General purpose I/O (TTL input, CMOS output) that is also AN1, the VREF+ A/D positive reference input, the C1IN0- and C2IN0- comparator inputs, and the ICSPCLK serial programming clock. |
| 13 | RA0 | bidirectional | General purpose I/O (TTL input, CMOS output) that is also AN0, the C1IN+ comparator input, DACOUT1 output, and the ICSPDAT serial programming data pin. |
| 14 | VSS | power_in | Ground reference pin for the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TSSOP-14 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating supply voltage VDDMIN (FOSC ≤ 16 MHz) | VDD | 1.8 | V | FOSC ≤ 16 MHz | 266 | ||
| Operating supply voltage VDDMIN (16 MHz < FOSC ≤ 20 MHz) | VDD | 2.5 | V | 16 MHz < FOSC ≤ 20 MHz | 266 | ||
| Operating supply voltage VDDMAX | VDD | 3.6 | V | 266 | |||
| Operating ambient temperature range (extended) | TA | -40 | 125 | °C | Extended temperature | 266 | |
| Ambient temperature under bias | TA | -40 | 125 | °C | Under bias | 265 | |
| Storage temperature | TSTG | -65 | 150 | °C | 265 | ||
| Voltage on VDD pin with respect to VSS (PIC16LF1503) | VDD | -0.3 | 4 | V | With respect to VSS | 265 | |
| Voltage on MCLR pin | -0.3 | 9 | V | With respect to VSS | 265 | ||
| Voltage on all other pins | -0.3 | V | Max VDD + 0.3 V | 265 | |||
| Maximum current on VSS pin (-40°C to +85°C) | 250 | mA | -40°C ≤ TA ≤ +85°C | 265 | |||
| Maximum current on VSS pin (+85°C to +125°C) | 85 | mA | +85°C ≤ TA ≤ +125°C | 265 | |||
| Maximum current on VDD pin (-40°C to +85°C) | 250 | mA | -40°C ≤ TA ≤ +85°C | 265 | |||
| Maximum current on VDD pin (+85°C to +125°C) | 85 | mA | +85°C ≤ TA ≤ +125°C | 265 | |||
| Sunk by any standard I/O pin | 50 | mA | Any standard I/O pin | 265 | |||
| Sourced by any standard I/O pin | 50 | mA | Any standard I/O pin | 265 | |||
| Clamp current | IK | 20 | mA | VPIN < 0 or VPIN > VDD | 265 | ||
| Maximum junction temperature | TJMAX | 150 | °C | 275 | |||
| RAM data retention voltage | VDR | 1.5 | V | Device in Sleep mode | 268 | ||
| VDD rise rate | SVDD | 0.05 | V/ms | Ensures that the Power-on Reset signal is released properly | 268 | ||
| Fixed Voltage Reference voltage, 1x gain (1.024 V nominal) | VFVR | -4 | 4 | % | 1x gain; VDD ≥ 2.5V; -40°C ≤ TA ≤ +85°C | 268 | |
| Fixed Voltage Reference voltage, 2x gain (2.048 V nominal) | VFVR | -3 | 7 | % | 2x gain; VDD ≥ 2.5V; -40°C ≤ TA ≤ +85°C | 268 | |
| I/O port input leakage current | IIL | -125 | 5 | 125 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, 85°C | 274 |
| Weak pull-up current | IPUR | 25 | 100 | 200 | µA | VDD = 3.3V, VPIN = VSS | 274 |
| Output low voltage, I/O ports | VOL | 0.6 | V | IOL = 6 mA, VDD = 3.3V | 274 | ||
| Capacitive loading on all I/O pins | CIO | 50 | pF | All I/O pins | 274 | ||
| Supply current IDD, FOSC = 1 MHz, ECM, Medium Power mode | IDD | 30 | 65 | µA | VDD 1.8V; FOSC = 1 MHz, External Clock (ECM), Medium Power mode | 270 | |
| Supply current IDD, FOSC = 4 MHz, ECM, Medium Power mode | IDD | 115 | 190 | µA | VDD 1.8V; FOSC = 4 MHz, External Clock (ECM), Medium Power mode | 270 | |
| Supply current IDD, FOSC = 31 kHz, LFINTOSC | IDD | 3.2 | 12 | µA | VDD 1.8V; FOSC = 31 kHz, LFINTOSC; -40°C ≤ TA ≤ +85°C | 270 | |
| Supply current IDD, FOSC = 500 kHz, HFINTOSC | IDD | 215 | 360 | µA | VDD 1.8V; FOSC = 500 kHz, HFINTOSC | 270 | |
| Supply current IDD, FOSC = 8 MHz, HFINTOSC | IDD | 410 | 660 | µA | VDD 1.8V; FOSC = 8 MHz, HFINTOSC | 270 | |
| Supply current IDD, FOSC = 16 MHz, HFINTOSC | IDD | 600 | 940 | µA | VDD 1.8V; FOSC = 16 MHz, HFINTOSC | 270 | |
| Supply current IDD, FOSC = 32 kHz, External Clock (ECL), Low-Power mode | IDD | 6 | 16 | µA | VDD 1.8V; FOSC = 32 kHz, External Clock (ECL), Low-Power mode | 271 | |
| Supply current IDD, FOSC = 500 kHz, External Clock (ECL), Low-Power mode | IDD | 19 | 35 | µA | VDD 1.8V; FOSC = 500 kHz, External Clock (ECL), Low-Power mode | 271 | |
| Base power-down current IPD (+85°C) | IPD | 0.02 | 1 | µA | VDD 1.8V; WDT, BOR, FVR and SOSC disabled; all peripherals inactive; Low-Power Sleep mode; +85°C | 272 | |
| Base power-down current IPD (+125°C) | IPD | 8 | µA | VDD 1.8V; WDT, BOR, FVR and SOSC disabled; all peripherals inactive; Low-Power Sleep mode; +125°C | 272 | ||
| WDT current (+85°C) | IPD | 0.26 | 2 | µA | VDD 1.8V; WDT current; +85°C | 272 | |
| WDT current (+125°C) | IPD | 9 | µA | VDD 1.8V; WDT current; +125°C | 272 | ||
| FVR current (+85°C) | IPD | 15 | 28 | µA | VDD 1.8V; FVR current; +85°C | 272 | |
| FVR current (+125°C) | IPD | 30 | µA | VDD 1.8V; FVR current; +125°C | 272 | ||
| ADC current, no conversion in progress (+85°C) | IPD | 0.11 | 1.5 | µA | VDD 1.8V; no conversion in progress; ADC clock source FRC | 273 | |
| Comparator current, CxSP = 0 (+85°C) | IPD | 7 | 22 | µA | VDD 1.8V; CxSP = 0 | 273 | |
| External clock frequency, ECL | FOSC | 0.5 | MHz | External Clock (ECL) | 277 | ||
| External clock frequency, ECM | FOSC | 4 | MHz | External Clock (ECM) | 277 | ||
| External clock frequency, ECH | FOSC | 20 | MHz | External Clock (ECH) | 277 | ||
| External CLKIN period | TOSC | 50 | ns | External Clock (EC) | 277 | ||
| Instruction cycle time | TCY | 200 | ns | TCY = 4/FOSC | 277 | ||
| Internal calibrated HFINTOSC frequency tolerance | HFOSC | -2 | 2 | % | VDD = 3.0V, TA = 25°C | 278 | |
| HFINTOSC wake-up from Sleep start-up time | TIOSC ST | 5 | 15 | µs | 278 | ||
| Voltage on MCLR/VPP pin during programming | VIHH | 8 | 9 | V | Note 2 (required only if single-supply programming is disabled) | 275 | |
| Flash cell endurance | EP | 10 | K E/W | -40°C ≤ TA ≤ +85°C (Note 1: self-write and block erase) | 275 | ||
| Self-timed write cycle time | TIW | 2 | 2.5 | ms | 275 | ||
| Characteristic retention | TRETD | 40 | year | Provided no other specifications are violated | 275 | ||
| High-endurance flash cell endurance | EHEFC | 100 | K E/W | 0°C ≤ TA ≤ +60°C, lower byte last 128 addresses | 275 | ||
| Brown-out Reset voltage, BORV = 1 (PIC16LF1503) | VBOR | 1.8 | 1.9 | 2.05 | V | BORV = 1 (PIC16LF1503) | 281 |
| Low-Power Brown-Out Reset voltage | VLPBOR | 1.8 | 2.1 | 2.5 | V | LPBOR = 1 | 281 |
| Power-up Timer period | TPWRT | 40 | 65 | 140 | ms | PWRTE = 0 | 281 |
| Thermal resistance junction to ambient, 14-pin TSSOP | θJA | 100 | °C/W | 14-pin TSSOP package | 275 | ||
| Thermal resistance junction to case, 14-pin TSSOP | θJC | 24.4 | °C/W | 14-pin TSSOP package | 275 |
CAD (KiCad official)
- Symbol:
PIC16LF1503-E - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
pic16lf1503-e-etched.step/pic16lf1503-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16lf1503-e.step/pic16lf1503-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (352 pp, sha256
3f6639e534c0589b, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC16LF1503-E/ST. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC16LF1503-E/MG