main
History Download
Ray Publish 0.1.0 6ff270b

PIC16LF1459-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-20-EP(4x4)

PIC16LF1459-I from Microchip Tech, in a QFN-20-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RA3 input General purpose input with IOC and WPU; also the VPP programming voltage (HV) and MCLR master clear with internal pull-up when MCLRE is enabled.
2 RC5 bidirectional General purpose I/O; also T0CKI Timer0 clock input, CWG1A complementary output, and PWM1 output.
3 RC4 bidirectional General purpose I/O; also C1OUT and C2OUT comparator outputs and CWG1B complementary output.
4 RC3 bidirectional General purpose I/O; also AN7 analog input, DACOUT2 output, comparator negative inputs C1IN3- and C2IN3-, and CLKR clock reference output.
5 RC6 bidirectional General purpose I/O; also AN8 analog input, SS slave select input, and PWM2 output.
6 RC7 bidirectional General purpose I/O; also AN9 analog input and SDO SPI data output.
7 RB7 bidirectional General purpose I/O; also TX EUSART asynchronous transmit and CK EUSART synchronous clock.
8 RB6 bidirectional General purpose I/O; also SCL I2C clock (open drain) and SCK SPI clock.
9 RB5 bidirectional General purpose I/O; also AN11 analog input, RX EUSART asynchronous receive, and DT EUSART synchronous data.
10 RB4 bidirectional General purpose I/O; also AN10 analog input, SDA I2C data (open drain), and SDI SPI data input.
11 RC2 bidirectional General purpose I/O; also AN6 analog input, DACOUT1 output, and comparator negative inputs C1IN2- and C2IN2-.
12 RC1 bidirectional General purpose I/O; also AN5 analog input, comparator negative inputs, CWGFLT fault input, INT external interrupt input, and ICSPCLK programming clock.
13 RC0 bidirectional General purpose I/O; also AN4 analog input, VREF+ positive voltage reference input, comparator positive inputs C1IN+ and C2IN+, and ICSPDAT programming data I/O.
14 VUSB3V3 power_in On LF devices this is the power supply input pin, which should be connected to VDD at PCB level; it supplies the USB transceiver and core logic.
15 RA1 bidirectional With the USB module disabled it is a general purpose input only; with USB enabled it is the D- USB differential minus line, and it also carries ICSPCLK for LVP legacy designs.
16 RA0 bidirectional With the USB module disabled it is a general purpose input only; with USB enabled it is the D+ USB differential plus line, and it also carries ICSPDAT for LVP legacy designs.
17 VSS power_in Ground reference.
18 VDD power_in Positive supply.
19 RA5 bidirectional General purpose I/O; also CLKIN external clock input (EC mode), SOSCI secondary oscillator connection, T1CKI, PWM2 alternate output, and OSC1 primary oscillator connection.
20 RA4 bidirectional General purpose I/O; also SOSCO secondary oscillator connection, CLKOUT FOSC/4 output, T1G, CLKR clock reference output, and OSC2 primary oscillator connection.
21 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package QFN-20-EP(4x4)
Category Single Chip Microcomputer/Microcontroller
Pins 21

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD Supply Voltage VDD 1.8 3.6 V PIC16LF1454/5/9 FOSC <= 20 MHz 343
VDD Supply Voltage VDD 2.5 3.6 V PIC16LF1454/5/9 FOSC <= 48 MHz 343
RAM Data Retention Voltage VDR 1.5 V Device in Sleep mode 343
Power-on Reset Release Voltage VPOR 1.6 V PIC16LF1454/5/9 343
Power-on Reset Rearm Voltage VPORR 0.8 V PIC16LF1454/5/9 343
VDD Rise Rate to ensure internal Power-on Reset signal SVDD 0.05 V/ms See Section 6.1 Power-On Reset (POR) for details. 343
Temperature Coefficient, Fixed Voltage Reference TCVFVR -130 ppm/°C 343
Line Regulation, Fixed Voltage Reference VFVR/VIN 0.27 %/V 343
Base Current: WDT, BOR, FVR, and SOSC disabled (Power-down current) IPD 0.025 1 uA 1.8V; Max +85°C column 348
Base Current: WDT, BOR, FVR, and SOSC disabled (Power-down current) IPD 0.025 8 uA 1.8V; Max +125°C column 348
Supply Current (IDD) IDD 5.2 15 uA 1.8V, FOSC = 32 kHz LP Oscillator mode 345
Supply Current (IDD) IDD 7.3 25 uA 3.0V, FOSC = 32 kHz LP Oscillator mode 345
Supply Current (IDD) IDD 60 107 uA 1.8V, FOSC = 1 MHz XT Oscillator mode 345
Supply Current (IDD) IDD 100 167 uA 3.0V, FOSC = 1 MHz XT Oscillator mode 345
Supply Current (IDD) IDD 140 267 uA 1.8V, FOSC = 4 MHz XT Oscillator mode 345
Supply Current (IDD) IDD 2.3 12 uA 1.8V, FOSC = 31 kHz LFINTOSC mode 345
Supply Current (IDD) IDD 245 360 uA 1.8V, FOSC = 500 kHz HFINTOSC mode 346
Supply Current (IDD) IDD 410 660 uA 1.8V, FOSC = 8 MHz HFINTOSC mode 346
Supply Current (IDD) IDD 600 940 uA 1.8V, FOSC = 16 MHz HFINTOSC mode 346
Weak Pull-up Current IPUR 25 100 200 uA VDD = 3.3V, VPIN = VSS 350
Output Low Voltage VOL 0.6 V IOL = 1.8mA, VDD = 1.8V 350
Capacitive Loading on All I/O pins CIO 50 pF 350
VDD for Bulk Erase VBE 2.7 V 351
Self-timed Write Cycle Time TIW 2 2.5 ms 351
USB Voltage VUSB 3 3.6 V Voltage on VUSB3V3 pin must be in this range for proper USB operation 352
Output Low Voltage (USB) VOL 0 0.3 V 1.5 kload connected to 3.6V 352
Voltage Output High (USB) VOH 2.8 3.6 V 1.5 kload connected to ground 352
External CLKIN Frequency (EC high) FOSC 20 MHz EC Oscillator mode (high) 355
HFINTOSC Accuracy with Active Clock Tuning OS07 -0.2 0.05 0.2 % -40°C to +125°C, Active Clock Tune is enabled and locked 356
HFINTOSC Frequency Tolerance OS08A -3 3 % +25°C, 16 MHz 356
HFINTOSC Frequency Tolerance OS08A -6 6 % 0°C <= TA <= +85°C, 16 MHz 356
Internal Calibrated HFINTOSC Frequency OS08 16 MHz 0°C <= TA <= +85°C 356
Internal LFINTOSC Frequency OS09 31 kHz -40°C <= TA <= +125°C 356
HFINTOSC Wake-up from Sleep Start-up Time OS10 5 8 us 356
HFINTOSC Self-tune Lock Time OS10A 8 ms NOTE 2 356
MCLR Pulse Width (low) TMCL 2 us VDD = 3.3-5V, -40°C to +85°C 360
A/D Clock Period TAD 1 9 us TOSC-based 362
Ambient temperature under bias TA -40 125 °C 342
Maximum output current sunk by any I/O pin IOL 25 mA 342
Maximum output current sourced by any I/O pin IOH 25 mA 342

CAD (KiCad official)

  • Symbol: PIC16LF1459-I
  • Footprint: Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm
  • 3D model: QFN-20-EP(4x4) (KiCad packages3D, STEP)
  • 3D model files: pic16lf1459-i-etched.step / pic16lf1459-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16lf1459-i.step / pic16lf1459-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (403 pp, sha256 c239350295f80129, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF