main
Ray pic16f882-i-so: renamed from pic16f882-i, the part it was built from (PIC16F882-I/SO); family listed 13843be

PIC16F882-I/SO

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil

PIC16F882-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RE3/MCLR/VPP input Input-only general purpose pin RE3, or Master Clear Reset input (Schmitt trigger) with internal pull-up, or high-voltage programming pin VPP.
2 RA0/AN0/ULPWU/C12IN0- bidirectional General purpose I/O that also serves as A/D channel 0 input, Ultra Low-Power Wake-up input, and negative input to Comparator C1 or C2.
3 RA1/AN1/C12IN1- bidirectional General purpose I/O that also serves as A/D channel 1 input and negative input to Comparator C1 or C2.
4 RA2/AN2/VREF-/CVREF/C2IN+ bidirectional General purpose I/O that also serves as A/D channel 2, A/D negative voltage reference input, comparator voltage reference output (CVREF), and positive input to Comparator C2.
5 RA3/AN3/VREF+/C1IN+ bidirectional General purpose I/O that also serves as A/D channel 3, VREF+ voltage reference input, and positive input to Comparator C1.
6 RA4/T0CKI/C1OUT bidirectional General purpose I/O that also serves as Timer0 clock input (Schmitt trigger) and CMOS Comparator C1 output.
7 RA5/AN4/SS/C2OUT bidirectional General purpose I/O that also serves as A/D channel 4 input, SPI Slave Select input (Schmitt trigger), and CMOS Comparator C2 output.
8 VSS power_in Ground reference for the device.
9 RA7/OSC1/CLKIN bidirectional General purpose I/O that also serves as crystal/resonator connection OSC1 or external clock input CLKIN (Schmitt trigger) for the RC oscillator.
10 RA6/OSC2/CLKOUT bidirectional General purpose I/O that also serves as crystal/resonator connection OSC2 or CMOS CLKOUT output providing FOSC/4.
11 RC0/T1OSO/T1CKI bidirectional General purpose I/O that also serves as Timer1 oscillator output T1OSO and Timer1 clock input T1CKI (Schmitt trigger).
12 RC1/T1OSI/CCP2 bidirectional General purpose I/O that also serves as Timer1 oscillator input T1OSI and Capture/Compare/PWM2 input or output.
13 RC2/P1A/CCP1 bidirectional General purpose I/O that also serves as PWM output P1A and Capture/Compare/PWM1 input or output.
14 RC3/SCK/SCL bidirectional General purpose I/O that also serves as SPI clock SCK and I2C clock SCL (open-drain output).
15 RC4/SDI/SDA bidirectional General purpose I/O that also serves as SPI data input SDI and I2C data input/output SDA (open-drain output).
16 RC5/SDO bidirectional General purpose I/O that also serves as CMOS SPI data output SDO.
17 RC6/TX/CK bidirectional General purpose I/O that also serves as EUSART asynchronous transmit output TX and synchronous clock CK.
18 RC7/RX/DT bidirectional General purpose I/O that also serves as EUSART asynchronous receive input RX and synchronous data DT.
19 VSS power_in Ground reference for the device.
20 VDD power_in Positive supply for the device.
21 RB0/AN12/INT bidirectional General purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up, also A/D channel 12 input and external edge-triggered interrupt INT (Schmitt trigger).
22 RB1/AN10/P1C/C12IN3- bidirectional General purpose I/O with individually controlled interrupt-on-change and pull-up, also A/D channel 10 input, PWM output P1C, and negative input to Comparator C1 or C2.
23 RB2/AN8/P1B bidirectional General purpose I/O with individually controlled interrupt-on-change and pull-up, also A/D channel 8 input and PWM output P1B.
24 RB3/AN9/PGM/C12IN2- bidirectional General purpose I/O with individually controlled interrupt-on-change and pull-up, also A/D channel 9 input, low-voltage ICSP programming enable PGM (Schmitt trigger), and negative input to Comparator C1 or C2.
25 RB4/AN11/P1D bidirectional General purpose I/O with individually controlled interrupt-on-change and pull-up, also A/D channel 11 input and PWM output P1D.
26 RB5/AN13/T1G bidirectional General purpose I/O with individually controlled interrupt-on-change and pull-up, also A/D channel 13 input and Timer1 gate input (Schmitt trigger).
27 RB6/ICSPCLK bidirectional General purpose I/O with individually controlled interrupt-on-change and pull-up, also serial programming clock ICSPCLK (Schmitt trigger).
28 RB7/ICSPDAT bidirectional General purpose I/O with individually controlled interrupt-on-change and pull-up, also ICSP data I/O ICSPDAT (Schmitt trigger input, CMOS output).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-28-300mil
Category Single Chip Microcomputer/Microcontroller
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient temperature under bias -40 125 °C 239
Storage temperature -65 150 °C 239
Voltage on VDD with respect to VSS -0.3 6.5 V 239
Voltage on MCLR with respect to Vss -0.3 13.5 V 239
Voltage on all other pins with respect to VSS -0.3 V max printed as (VDD + 0.3V) 239
Maximum current out of VSS pin 95 mA 239
Maximum current into VDD pin 95 mA 239
Input clamp current IIK 20 mA VI < 0 or VI > VDD 239
Output clamp current IOK 20 mA Vo < 0 or Vo > VDD 239
Maximum output current sunk by any I/O pin 25 mA 239
Maximum output current sourced by any I/O pin 25 mA 239
VDD Supply Voltage VDD 2 5.5 V FOSC ≤ 8 MHz: HFINTOSC, EC 241
VDD Supply Voltage VDD 3 5.5 V FOSC ≤ 10 MHz 241
VDD Supply Voltage VDD 4.5 5.5 V FOSC ≤ 20 MHz 241
RAM Data Retention Voltage VDR 1.5 V Device in Sleep mode 241
VDD Rise Rate to ensure internal Power-on Reset signal SVDD 0.05 V/ms See Section 14.2.1 Power-on Reset (POR) 241
Supply Current (IDD) IDD 13 19 µA FOSC = 32 kHz; LP Oscillator mode; VDD = 2.0V 242
Supply Current (IDD) IDD 22 30 µA FOSC = 32 kHz; LP Oscillator mode; VDD = 3.0V 242
Supply Current (IDD) IDD 33 60 µA FOSC = 32 kHz; LP Oscillator mode; VDD = 5.0V 242
Supply Current (IDD) IDD 280 380 µA FOSC = 4 MHz; XT Oscillator mode; VDD = 2.0V 242
Supply Current (IDD) IDD 480 670 µA FOSC = 4 MHz; XT Oscillator mode; VDD = 3.0V 242
Supply Current (IDD) IDD 0.9 1.4 mA FOSC = 4 MHz; XT Oscillator mode; VDD = 5.0V 242
Supply Current (IDD) IDD 416 520 µA FOSC = 4 MHz; HFINTOSC mode; VDD = 2.0V 242
Supply Current (IDD) IDD 640 840 µA FOSC = 4 MHz; HFINTOSC mode; VDD = 3.0V 242
Supply Current (IDD) IDD 1.13 1.6 mA FOSC = 4 MHz; HFINTOSC mode; VDD = 5.0V 242
Supply Current (IDD) IDD 0.65 0.9 mA FOSC = 8 MHz; HFINTOSC mode; VDD = 2.0V 242
Supply Current (IDD) IDD 1.01 1.3 mA FOSC = 8 MHz; HFINTOSC mode; VDD = 3.0V 242
Supply Current (IDD) IDD 1.86 2.3 mA FOSC = 8 MHz; HFINTOSC mode; VDD = 5.0V 242
Supply Current (IDD) IDD 3.8 4.7 mA FOSC = 20 MHz; HS Oscillator mode; VDD = 4.5V 242
Supply Current (IDD) IDD 4 4.8 mA FOSC = 20 MHz; HS Oscillator mode; VDD = 5.0V 242
Power-down Base Current (IPD) IPD 0.05 1.2 µA WDT, BOR, Comparators, VREF and T1OSC disabled; VDD = 2.0V 243
Power-down Base Current (IPD) IPD 0.15 1.5 µA WDT, BOR, Comparators, VREF and T1OSC disabled; VDD = 3.0V 243
Power-down Base Current (IPD) IPD 0.35 1.8 µA WDT, BOR, Comparators, VREF and T1OSC disabled; VDD = 5.0V 243
WDT Current 1 2.2 µA VDD = 2.0V 243
WDT Current 2 4 µA VDD = 3.0V 243
WDT Current 3 7 µA VDD = 5.0V 243
BOR Current 42 60 µA VDD = 3.0V 243
BOR Current 85 122 µA VDD = 5.0V 243
Comparator Current, both comparators enabled 32 45 µA both comparators enabled; VDD = 2.0V 243
Comparator Current, both comparators enabled 60 78 µA both comparators enabled; VDD = 3.0V 243
Comparator Current, both comparators enabled 120 160 µA both comparators enabled; VDD = 5.0V 243
T1OSC Current, 32.768 kHz 2 5 µA VDD = 2.0V 243
T1OSC Current, 32.768 kHz 2.5 5.5 µA VDD = 3.0V 243
T1OSC Current, 32.768 kHz 3 7 µA VDD = 5.0V 243
Input Low Voltage, I/O port with TTL buffer VIL 0.8 V 4.5V ≤ VDD ≤ 5.5V 245
Input High Voltage, I/O port with TTL buffer VIH 2 V 4.5V ≤ VDD ≤ 5.5V 245
PORTB Weak Pull-up Current IPUR 50 250 400 µA VDD = 5.0V, VPIN = VSS 245
Output Low Voltage, I/O ports VOL 0.6 V IOL = 8.5 mA, VDD = 4.5V (Ind.) 245
Input Leakage Current, I/O ports IIL 0.1 1 µA VSS ≤ VPIN ≤ VDD, pin at high-impedance 245
Input Leakage Current, MCLR IIL 0.1 5 µA VSS ≤ VPIN ≤ VDD 245
Input Leakage Current, OSC1 IIL 0.1 5 µA VSS ≤ VPIN ≤ VDD, XT, HS and LP oscillator configuration 245
Thermal Resistance Junction to Ambient θJA 80.2 °C/W 28-pin SOIC package 247
Internal Calibrated HFINTOSC Frequency HFOSC 7.6 8 8.4 MHz 5%; 2.0V ≤ VDD ≤ 5.5V, -40°C ≤ TA ≤ +85°C (Ind.) 250
Internal Uncalibrated LFINTOSC Frequency LFOSC 15 31 45 kHz 250
Brown-out Reset Voltage, BOR4V bit = 0 VBOR 2 2.2 V BOR4V bit = 0 253
Brown-out Reset Voltage, BOR4V bit = 1 VBOR 3.6 4 4.4 V BOR4V bit = 1, -40°C to +85°C 253
Power-up Timer Period TPWRT 40 65 140 ms 253
Watchdog Timer Time-out Period (No Prescaler) TWDT 10 16 29 ms VDD = 5V, -40°C to +85°C 253

CAD (KiCad official)

  • Symbol: PIC16F882-I
  • Footprint: Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm
  • 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
  • 3D model files: pic16f882-i-etched.step / pic16f882-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16f882-i.step / pic16f882-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (322 pp, sha256 8cca4a12d17d06af, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is PIC16F882-I/SO. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • PIC16F882-I/SP