main
History Download
Ray Publish 0.1.0 ab1a750

PIC16F876-20

Microchip Tech · Pre-ordered MCUs · SOIC-28-300mil

PIC16F876-20 from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MCLR/VPP input Master Clear (Reset) input or programming voltage input, an active low RESET to the device.
2 RA0/AN0 bidirectional RA0 can also be analog input0.
3 RA1/AN1 bidirectional RA1 can also be analog input1.
4 RA2/AN2/VREF- bidirectional RA2 can also be analog input2 or negative analog reference voltage.
5 RA3/AN3/VREF+ bidirectional RA3 can also be analog input3 or positive analog reference voltage.
6 RA4/T0CKI bidirectional RA4 can also be the clock input to the Timer0 module; output is open drain type.
7 RA5/SS/AN4 bidirectional RA5 can also be analog input4 or the slave select for the synchronous serial port.
8 VSS power_in Ground reference for logic and I/O pins.
9 OSC1/CLKIN input Oscillator crystal input/external clock source input.
10 OSC2/CLKOUT output Oscillator crystal output; connects to crystal or resonator in crystal oscillator mode, and in RC mode outputs CLKOUT which has 1/4 the frequency of OSC1.
11 RC0/T1OSO/T1CKI bidirectional RC0 can also be the Timer1 oscillator output or Timer1 clock input.
12 RC1/T1OSI/CCP2 bidirectional RC1 can also be the Timer1 oscillator input or Capture2 input/Compare2 output/PWM2 output.
13 RC2/CCP1 bidirectional RC2 can also be the Capture1 input/Compare1 output/PWM1 output.
14 RC3/SCK/SCL bidirectional RC3 can also be the synchronous serial clock input/output for both SPI and I2C modes.
15 RC4/SDI/SDA bidirectional RC4 can also be the SPI Data In (SPI mode) or data I/O (I2C mode).
16 RC5/SDO bidirectional RC5 can also be the SPI Data Out (SPI mode).
17 RC6/TX/CK bidirectional RC6 can also be the USART Asynchronous Transmit or Synchronous Clock.
18 RC7/RX/DT bidirectional RC7 can also be the USART Asynchronous Receive or Synchronous Data.
19 VSS power_in Ground reference for logic and I/O pins.
20 VDD power_in Positive supply for logic and I/O pins.
21 RB0/INT bidirectional RB0 can also be the external interrupt pin; this buffer is a Schmitt Trigger input when configured as the external interrupt.
22 RB1 bidirectional PORTB bi-directional I/O pin, which can be software programmed for internal weak pull-up on all inputs.
23 RB2 bidirectional PORTB bi-directional I/O pin, which can be software programmed for internal weak pull-up on all inputs.
24 RB3/PGM bidirectional RB3 can also be the low voltage programming input.
25 RB4 bidirectional Interrupt-on-change pin.
26 RB5 bidirectional Interrupt-on-change pin.
27 RB6/PGC bidirectional Interrupt-on-change pin or In-Circuit Debugger pin; serial programming clock.
28 RB7/PGD bidirectional Interrupt-on-change pin or In-Circuit Debugger pin; serial programming data.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-28-300mil
Category Single Chip Microcomputer/Microcontroller
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD Supply Voltage (LP, XT, RC osc) VDD 4 5.5 V LP, XT, RC osc configuration 152
VDD Supply Voltage (HS osc) VDD 4.5 5.5 V HS osc configuration 152
Brown-out Reset Voltage VBOR 3.7 4 4.35 V BODEN bit in configuration word enabled 152
VDD Rise Rate for Power-on Reset SVDD 0.05 V/ms See section on Power-on Reset for details 152
Supply Current (RC osc) IDD 1.6 4 mA RC osc configurations, FOSC = 4 MHz, VDD = 5.5V 153
Supply Current (HS osc) IDD 7 15 mA HS osc configuration, FOSC = 20 MHz, VDD = 5.5V 153
Brown-out Reset Current IBOR 85 200 µA BOR enabled, VDD = 5.0V 153
Power-down Current IPD 10.5 42 µA VDD = 4.0V, WDT enabled, -40C to +85C 154
Power-down Current IPD 1.5 16 µA VDD = 4.0V, WDT enabled, -40C to +85C 154
Input Low Voltage, I/O ports with TTL buffer VIL 0.8 V 4.5V ≤ VDD ≤ 5.5V 155
Input High Voltage, I/O ports with TTL buffer VIH 2 V 4.5V ≤ VDD ≤ 5.5V 155
PORTB Weak Pull-up Current IPURB 50 250 400 µA VDD = 5V, VPIN = VSS, -40°C to +85°C 155
Input Leakage Current, I/O ports IIL 1 µA VSS ≤ VPIN ≤ VDD, pin at hi-impedance 155
Input Leakage Current, MCLR, RA4/T0CKI IIL 5 µA VSS ≤ VPIN ≤ VDD 155
Input Leakage Current, OSC1 IIL 5 µA VSS ≤ VPIN ≤ VDD, XT, HS and LP osc configuration 155
Output Low Voltage, I/O ports VOL 0.6 V IOL = 8.5 mA, VDD = 4.5V, -40C to +85C 156
Output Low Voltage, OSC2/CLKOUT (RC osc) VOL 0.6 V IOL = 1.6 mA, VDD = 4.5V, -40C to +85C 156
Open-Drain High Voltage, RA4 pin VOD 8.5 V RA4 pin 156
Capacitive Loading, OSC2 pin COSC2 15 pF In XT, HS and LP modes when external clock is used to drive OSC1 156
Capacitive Loading, all I/O pins and OSC2 (RC mode) CIO 50 pF 156
Capacitive Loading, SCL, SDA (I2C mode) CB 400 pF SCL, SDA (I2C mode) 156
VDD for read/write (EEPROM) VDRW 5.5 V Using EECON to read/write, VMIN = min. operating voltage 156
Data EEPROM Erase/write cycle time TDEW 4 8 ms 156
Program FLASH Endurance EP 1000 E/W 25C at 5V 156
VDD for read (FLASH) VPR 5.5 V VMIN = min operating voltage 156
VDD for erase/write (FLASH) VDD 5.5 V Using EECON to read/write, VMIN = min. operating voltage 156
Program FLASH Erase/Write cycle time TPEW 4 8 ms 156
External CLKIN Frequency (HS osc -20) FOSC 20 MHz HS osc mode (-20) 162
External CLKIN Period (HS osc -20) TOSC 50 ns HS osc mode (-20) 162
Instruction Cycle Time TCY 200 ns TCY = 4/FOSC 162
OSC1 (Q1 cycle) to Port out valid TosH2ioV 255 ns 163
Port output rise time (Standard F) TioR 10 40 ns Standard (F) 163
Port output fall time (Standard F) TioF 10 40 ns Standard (F) 163
Absolute max ambient temperature under bias TA -55 125 °C Ambient temperature under bias 149
Absolute max storage temperature TSTG -65 150 °C Storage temperature 149
Absolute max voltage on VDD with respect to VSS VDD -0.3 7.5 V Voltage on VDD with respect to VSS 149
Absolute max voltage on MCLR with respect to VSS VMCLR 0 14 V Voltage on MCLR with respect to VSS (Note 2) 149
Absolute max voltage on RA4 with respect to VSS VRA4 0 8.5 V Voltage on RA4 with respect to VSS 149
Absolute max total power dissipation Pdis 1 W Note 1 149
Absolute max input clamp current IIK 20 mA VI < 0 or VI > VDD 149
Absolute max output clamp current IOK 20 mA VO < 0 or VO > VDD 149

CAD (KiCad official)

  • Symbol: PIC16F876-20
  • Footprint: Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm
  • 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
  • 3D model files: pic16f876-20-etched.step / pic16f876-20-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16f876-20.step / pic16f876-20.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (218 pp, sha256 2b2f4f67afe6ac63, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF