Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC16F84A-20I/SO

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-18-300mil

PIC16F84A-20I from Microchip Tech, in a SOIC-18-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RA2 bidirectional PORTA bidirectional I/O pin with TTL input buffer.
2 RA3 bidirectional PORTA bidirectional I/O pin with TTL input buffer.
3 RA4/T0CKI bidirectional PORTA bidirectional I/O pin with Schmitt Trigger input that can also be selected as the TMR0 clock input; output is open drain.
4 MCLR input Active-low master clear (reset) input to the device, also used as the programming voltage input, with Schmitt Trigger input buffer.
5 VSS power_in Ground reference for logic and I/O pins.
6 RB0/INT bidirectional PORTB bidirectional I/O pin with TTL input that can also be selected as the external interrupt pin, where the buffer becomes Schmitt Trigger.
7 RB1 bidirectional PORTB bidirectional I/O pin with TTL input buffer and software-programmable internal weak pull-up.
8 RB2 bidirectional PORTB bidirectional I/O pin with TTL input buffer and software-programmable internal weak pull-up.
9 RB3 bidirectional PORTB bidirectional I/O pin with TTL input buffer and software-programmable internal weak pull-up.
10 RB4 bidirectional PORTB bidirectional I/O pin with TTL input buffer; provides interrupt-on-change and software-programmable internal weak pull-up.
11 RB5 bidirectional PORTB bidirectional I/O pin with TTL input buffer; provides interrupt-on-change and software-programmable internal weak pull-up.
12 RB6 bidirectional PORTB bidirectional I/O pin with TTL/Schmitt Trigger input; provides interrupt-on-change and serves as the serial programming clock.
13 RB7 bidirectional PORTB bidirectional I/O pin with TTL/Schmitt Trigger input; provides interrupt-on-change and serves as the serial programming data.
14 VDD power_in Positive supply for logic and I/O pins.
15 OSC2/CLKOUT output Oscillator crystal output that connects to a crystal or resonator in crystal mode; in RC mode it outputs CLKOUT at 1/4 the OSC1 frequency, denoting the instruction cycle rate.
16 OSC1/CLKIN input Oscillator crystal input or external clock source input; buffer is Schmitt Trigger in RC oscillator mode and CMOS otherwise.
17 RA0 bidirectional PORTA bidirectional I/O pin with TTL input buffer.
18 RA1 bidirectional PORTA bidirectional I/O pin with TTL input buffer.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-18-300mil
Category Single Chip Microcomputer/Microcontroller
Pins 18

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (XT, RC and LP osc configuration) VDD 4 5.5 V XT, RC and LP osc configuration 49
Supply voltage (HS osc configuration) VDD 4.5 5.5 V HS osc configuration 49
RAM data retention voltage VDR 1.5 V Device in SLEEP mode 49
Supply current IDD 1.8 4.5 mA RC and XT osc configuration (Note 4), FOSC = 2.0 MHz, VDD = 5.5V 49
Supply current IDD 3 10 mA RC and XT osc configuration (Note 4), FOSC = 4.0 MHz, VDD = 5.5V 49
Supply current IDD 10 20 mA HS osc configuration (PIC16F84A-20), FOSC = 20 MHz, VDD = 5.5V 49
Power-down current IPD 1.5 3.5 µA VDD = 4.5V, WDT disabled, industrial 50
Watchdog Timer module differential current IWDT 0.2 16 µA VDD = 2.0V, Industrial, Commercial 50
Watchdog Timer module differential current IWDT 3.5 28 µA VDD = 4.0V, Industrial, Extended 50
Watchdog Timer module differential current IWDT 4.8 30 µA VDD = 4.5V, Industrial, Extended 50
Input low voltage, I/O ports with TTL buffer VIL 0.8 V 4.5V ≤ VDD ≤ 5.5V (Note 4) 51
Input high voltage, I/O ports with TTL buffer VIH 2 V 4.5V ≤ VDD ≤ 5.5V (Note 4) 51
Input high voltage, MCLR and RA4/T0CKI VIH 8.5 V RA4/T0CKI 51
Input leakage current, I/O ports IIL 1 µA Vss ≤ VPIN ≤ VDD, pin at hi-impedance 51
Input leakage current, MCLR and RA4/T0CKI IIL 5 µA Vss ≤ VPIN ≤ VDD 51
Input leakage current, OSC1 IIL 5 µA Vss ≤ VPIN ≤ VDD, XT, HS and LP osc configuration 51
PORTB weak pull-up current IPURB 50 250 400 µA VDD = 5.0V, VPIN = VSS 51
Output low voltage, I/O ports VOL 0.6 V IOL = 8.5 mA, VDD = 4.5V 52
Capacitive loading, all I/O pins and OSC2 (RC mode) CIO 50 pF All I/O pins and OSC2 (RC mode) 52
Data EEPROM VDD for read/write VDRW 5.5 V VMIN = Minimum operating voltage 52
Data EEPROM erase/write cycle time TDEW 4 8 ms 52
Program FLASH VDD for read VPR 5.5 V VMIN = Minimum operating voltage 52
Program FLASH VDD for erase/write VPEW 4.5 5.5 V 52
Program FLASH erase/write cycle time TPEW 4 8 ms 52
External CLKIN frequency (HS) FOSC 20 MHz HS osc (-20) 55
Oscillator frequency (HS) FOSC 1 20 MHz HS osc (-20) 55
External CLKIN period (HS) 1TOSC 50 ns HS osc (-20) 55
Oscillator period (HS) 1TOSC 50 1000 ns HS osc (-20) 55
Instruction cycle time 2TCY 0.2 µs 55
Clock in (OSC1) high or low time (HS) TosL, TosH 17.5 ns HS osc (-20) 55
Clock in (OSC1) rise or fall time (HS) TosR, TosF 7.5 ns HS osc (-20) 55
OSC1 (Q1 cycle) to port out valid TosH2ioV 125 ns Standard 56
OSC1 (Q2 cycle) to port input invalid (I/O in hold time) TosH2ioI 10 ns Standard 56
Port input valid to OSC1 (I/O in setup time) TioV2osH -75 ns Standard 56
Port output rise time TioR 10 35 ns Standard 56
Port output fall time TioF 10 35 ns Standard 56
INT pin high or low time TINP 20 ns Standard 56
T0CKI high pulse width, with prescaler Tt0H 50 ns With prescaler, 2.0V ≤ VDD ≤ 3.0V 58
T0CKI high pulse width, with prescaler Tt0H 30 ns With prescaler, 3.0V ≤ VDD ≤ 6.0V 58
T0CKI low pulse width, with prescaler Tt0L 50 ns With prescaler, 2.0V ≤ VDD ≤ 3.0V 58
T0CKI low pulse width, with prescaler Tt0L 20 ns With prescaler, 3.0V ≤ VDD ≤ 6.0V 58
Operating temperature (industrial) TA -40 85 °C Industrial 49
Ambient temperature under bias -55 125 °C 47
Storage temperature -65 150 °C 47
Voltage on any pin with respect to VSS (except VDD, MCLR, RA4) -0.3 V Maximum printed as (VDD + 0.3V) 47
Voltage on VDD with respect to VSS VDD -0.3 7.5 V 47
Voltage on MCLR with respect to VSS VMCLR -0.3 14 V Note 1 47
Voltage on RA4 with respect to VSS -0.3 8.5 V 47
Maximum current out of VSS pin 150 mA 47
Maximum current into VDD pin 100 mA 47
Input clamp current IIK 20 mA VI < 0 or VI > VDD 47
Output clamp current IOK 20 mA VO < 0 or VO > VDD 47
Maximum current sunk by PORTA 80 mA 47
Maximum current sourced by PORTA 50 mA 47
Maximum current sunk by PORTB 150 mA 47
Maximum current sourced by PORTB 100 mA 47

CAD (KiCad official)

  • Symbol: PIC16F84A-20I
  • Footprint: Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm
  • 3D model: SOIC-18-300mil (KiCad packages3D, STEP)
  • 3D model files: pic16f84a-20i-etched.step / pic16f84a-20i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16f84a-20i.step / pic16f84a-20i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (90 pp, sha256 33e026b441bd51c2, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is PIC16F84A-20I/SO. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • PIC16F84A-20I/P