main
History Download
Ray Publish 0.1.0 00cd817

PIC16F84A-20

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-18-300mil

PIC16F84A-20 from Microchip Tech, in a SOIC-18-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RA2 bidirectional PORTA bidirectional I/O pin with a TTL input buffer.
2 RA3 bidirectional PORTA bidirectional I/O pin with a TTL input buffer.
3 RA4/T0CKI bidirectional PORTA bidirectional I/O pin with a Schmitt Trigger input that can also be selected as the TMR0 timer/counter clock input, and whose output is open drain.
4 MCLR input Active-low master clear (reset) input that also serves as the programming voltage input.
5 VSS power_in Ground reference for logic and I/O pins.
6 RB0/INT bidirectional PORTB bidirectional I/O pin with TTL/Schmitt Trigger input (Schmitt Trigger when configured as external interrupt) that can also be selected as the external interrupt pin RB0/INT.
7 RB1 bidirectional PORTB bidirectional I/O pin with a TTL input buffer; PORTB inputs can be software-programmed for internal weak pull-up.
8 RB2 bidirectional PORTB bidirectional I/O pin with a TTL input buffer; PORTB inputs can be software-programmed for internal weak pull-up.
9 RB3 bidirectional PORTB bidirectional I/O pin with a TTL input buffer; PORTB inputs can be software-programmed for internal weak pull-up.
10 RB4 bidirectional PORTB bidirectional I/O pin with a TTL input buffer that provides interrupt-on-change; PORTB inputs can be software-programmed for internal weak pull-up.
11 RB5 bidirectional PORTB bidirectional I/O pin with a TTL input buffer that provides interrupt-on-change; PORTB inputs can be software-programmed for internal weak pull-up.
12 RB6 bidirectional PORTB bidirectional I/O pin with interrupt-on-change and a TTL/Schmitt Trigger input buffer (Schmitt Trigger when used in serial programming mode), serving as the serial programming clock.
13 RB7 bidirectional PORTB bidirectional I/O pin with interrupt-on-change and a TTL/Schmitt Trigger input buffer (Schmitt Trigger when used in serial programming mode), serving as the serial programming data.
14 VDD power_in Positive supply for logic and I/O pins.
15 OSC2/CLKOUT output Oscillator crystal output connecting to a crystal or resonator in crystal oscillator mode; in RC mode it outputs CLKOUT at 1/4 the frequency of OSC1.
16 OSC1/CLKIN input Oscillator crystal input or external clock source input, with Schmitt Trigger buffer in RC oscillator mode and CMOS input otherwise.
17 RA0 bidirectional PORTA bidirectional I/O pin with a TTL input buffer.
18 RA1 bidirectional PORTA bidirectional I/O pin with a TTL input buffer.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-18-300mil
Category Single Chip Microcomputer/Microcontroller
Pins 18

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (XT, RC, LP osc; 16F84A) VDD 4 5.5 V XT, RC and LP osc configuration 49
Supply voltage (HS osc; PIC16F84A-20) VDD 4.5 5.5 V HS osc configuration 49
RAM data retention voltage VDR 1.5 V Device in SLEEP mode 49
VDD rise rate for internal POR SVDD 0.05 V/ms 49
Supply current, RC/XT osc IDD 1.8 4.5 mA RC and XT osc configuration (Note 4), FOSC = 4.0 MHz, VDD = 5.5V 49
Supply current during FLASH programming IDD 3 10 mA RC and XT osc configuration (Note 4), FOSC = 4.0 MHz, VDD = 5.5V (During FLASH programming) 49
Supply current, HS osc (PIC16F84A-20) IDD 10 20 mA HS osc configuration (PIC16F84A-20), FOSC = 20 MHz, VDD = 5.5V 49
Power-down current, VDD 4.5V industrial IPD 1.5 3.5 µA VDD = 4.5V, WDT disabled, industrial 50
Power-down current, VDD 4.5V extended IPD 1.5 5.5 µA VDD = 4.5V, WDT disabled, extended 50
Watchdog Timer differential current IWDT 3.5 20 µA VDD = 4.0V, Commercial 50
Watchdog Timer differential current IWDT 3.5 28 µA VDD = 4.0V, Industrial, Extended 50
Watchdog Timer differential current IWDT 4.8 25 µA VDD = 4.5V, Commercial 50
Watchdog Timer differential current IWDT 4.8 30 µA VDD = 4.5V, Industrial, Extended 50
Input low voltage, I/O ports with TTL buffer VIL 0.8 V 4.5V ≤ VDD ≤ 5.5V (Note 4) 51
Input high voltage, I/O ports with TTL buffer VIH 2 V 4.5V ≤ VDD ≤ 5.5V (Note 4) 51
Input high voltage, RA4/T0CKI VIH 8.5 V 51
Input leakage current, I/O ports IIL 1 µA Vss ≤ VPIN ≤ VDD, pin at hi-impedance 51
Input leakage current, MCLR and RA4/T0CKI IIL 5 µA Vss ≤ VPIN ≤ VDD 51
Input leakage current, OSC1 IIL 5 µA Vss ≤ VPIN ≤ VDD, XT, HS and LP osc configuration 51
PORTB weak pull-up current IPURB 50 250 400 µA VDD = 5.0V, VPIN = VSS 51
Output low voltage, I/O ports VOL 0.6 V IOL = 8.5 mA, VDD = 4.5V 52
Open drain high voltage, RA4 pin VOD 8.5 V RA4 pin 52
Capacitive loading, all I/O pins and OSC2 (RC mode) CIO 50 pF All I/O pins and OSC2 (RC mode) 52
VDD for data EEPROM read/write VDRW 5.5 V VMIN = Minimum operating voltage (lower limit is an expression, not numeric) 52
Data EEPROM erase/write cycle time TDEW 4 8 ms Erase/Write cycle time 52
VDD for FLASH erase/write VPEW 4.5 5.5 V VDD for erase/write 52
VDD for FLASH read VPR 5.5 V VMIN = Minimum operating voltage (lower limit is an expression, not numeric) 52
Program FLASH erase/write cycle time TPEW 4 8 ms Erase/Write cycle time 52
External CLKIN frequency, HS osc FOSC 20 MHz HS osc (-20) 55
Oscillator frequency, HS osc FOSC 1 20 MHz HS osc (-20) 55
Oscillator period, HS osc TOSC 50 1000 ns HS osc (-20) 55
Clock in (OSC1) high or low time, HS osc TosL, TosH 17.5 ns HS osc (-20) 55
Instruction cycle time TCY 0.2 µs 55
OSC1 to CLKOUT TosH2ckL 15 30 ns (Note 1) 56
Port output valid from OSC1 (Q1 cycle) TosH2ioV 125 ns Standard 56
OSC1 (Q2 cycle) to port input invalid (I/O in hold time) TosH2ioI 10 ns Standard 56
Port output rise time TioR 10 35 ns Standard 56
INT pin high or low time TINP 20 ns Standard 56
Absolute max: ambient temperature under bias -55 125 °C 47
Absolute max: storage temperature -65 150 °C 47
Absolute max: voltage on any pin wrt VSS (except VDD, MCLR, RA4) -0.3 V Upper limit printed as (VDD + 0.3V) 47
Absolute max: voltage on VDD wrt VSS -0.3 7.5 V 47
Absolute max: voltage on MCLR wrt VSS -0.3 14 V Note 1 47
Absolute max: voltage on RA4 wrt VSS -0.3 8.5 V 47
Absolute max: current out of VSS pin 150 mA 47
Absolute max: current into VDD pin 100 mA 47
Absolute max: input clamp current IIK IIK 20 mA VI < 0 or VI > VDD 47
Absolute max: output clamp current IOK IOK 20 mA VO < 0 or VO > VDD 47
Absolute max: current sunk by PORTA 80 mA 47
Absolute max: current sourced by PORTA 50 mA 47
Absolute max: current sunk by PORTB 150 mA 47
Absolute max: current sourced by PORTB 100 mA 47
Operating ambient temperature, commercial TA 0 70 °C Commercial 49
Operating ambient temperature, industrial TA -40 85 °C Industrial 49
Operating ambient temperature, extended TA -40 125 °C Extended 49

CAD (KiCad official)

  • Symbol: PIC16F84A-20
  • Footprint: Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm
  • 3D model: SOIC-18-300mil (KiCad packages3D, STEP)
  • 3D model files: pic16f84a-20-etched.step / pic16f84a-20-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16f84a-20.step / pic16f84a-20.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (90 pp, sha256 33e026b441bd51c2, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF