Generated by kicad-footprint-generator · KiCad file format 20260206
PIC16F84-10I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · PDIP-18
PIC16F84-10I from Microchip Tech, in a PDIP-18. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RA2 | bidirectional | PORTA bi-directional I/O pin with TTL input buffer. |
| 2 | RA3 | bidirectional | PORTA bi-directional I/O pin with TTL input buffer. |
| 3 | RA4/T0CKI | bidirectional | PORTA I/O pin with Schmitt Trigger input and open-drain output that can also be selected as the clock input to the TMR0 timer/counter. |
| 4 | MCLR | input | Master clear (active low reset) input and programming voltage input with Schmitt Trigger buffer. |
| 5 | VSS | power_in | Ground reference for logic and I/O pins. |
| 6 | RB0/INT | bidirectional | PORTB bi-directional I/O pin (TTL/ST input) that can also be selected as the external interrupt pin, with software-programmable weak pull-up. |
| 7 | RB1 | bidirectional | PORTB bi-directional I/O pin with TTL input buffer and software-programmable weak pull-up. |
| 8 | RB2 | bidirectional | PORTB bi-directional I/O pin with TTL input buffer and software-programmable weak pull-up. |
| 9 | RB3 | bidirectional | PORTB bi-directional I/O pin with TTL input buffer and software-programmable weak pull-up. |
| 10 | RB4 | bidirectional | PORTB bi-directional I/O pin with TTL input buffer, weak pull-up option and interrupt on change. |
| 11 | RB5 | bidirectional | PORTB bi-directional I/O pin with TTL input buffer, weak pull-up option and interrupt on change. |
| 12 | RB6 | bidirectional | PORTB bi-directional I/O pin (TTL/ST input) with interrupt on change that also serves as the serial programming clock. |
| 13 | RB7 | bidirectional | PORTB bi-directional I/O pin (TTL/ST input) with interrupt on change that also serves as the serial programming data. |
| 14 | VDD | power_in | Positive supply for logic and I/O pins. |
| 15 | OSC2/CLKOUT | output | Oscillator crystal output connecting to crystal or resonator; in RC mode it outputs CLKOUT at 1/4 the frequency of OSC1, denoting the instruction cycle rate. |
| 16 | OSC1/CLKIN | input | Oscillator crystal input or external clock source input (Schmitt Trigger in RC mode, CMOS otherwise). |
| 17 | RA0 | bidirectional | PORTA bi-directional I/O pin with TTL input buffer. |
| 18 | RA1 | bidirectional | PORTA bi-directional I/O pin with TTL input buffer. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | PDIP-18 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 18 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -55 | 125 | °C | 75 | |||
| Storage temperature | -65 | 150 | °C | 75 | |||
| Voltage on VDD with respect to VSS | VDD | -0.3 | 7.5 | V | 75 | ||
| Voltage on MCLR with respect to VSS | -0.3 | 14 | V | Note 2 | 75 | ||
| Voltage on any pin except VDD and MCLR (lower limit) | -0.6 | V | upper limit printed as VDD + 0.6V | 75 | |||
| Maximum current out of VSS pin | 150 | mA | 75 | ||||
| Maximum current into VDD pin | 100 | mA | 75 | ||||
| Maximum output current sourced by any I/O pin | 20 | mA | 75 | ||||
| Maximum current sunk by PORTA | 80 | mA | 75 | ||||
| Maximum current sourced by PORTA | 50 | mA | 75 | ||||
| Maximum current sunk by PORTB | 150 | mA | 75 | ||||
| Maximum current sourced by PORTB | 100 | mA | 75 | ||||
| Operating temperature (industrial) | TA | -40 | 85 | °C | industrial | 77 | |
| Supply Voltage, HS osc configuration | VDD | 4.5 | 5.5 | V | HS osc configuration (D001A) | 77 | |
| RAM Data Retention Voltage | VDR | 1.5 | V | Device in SLEEP mode | 77 | ||
| VDD rise rate to ensure internal Power-on Reset | SVDD | 0.05 | V/ms | See section on Power-on Reset for details | 77 | ||
| Supply Current, RC and XT osc | IDD | 1.8 | 4.5 | mA | FOSC = 4.0 MHz, VDD = 5.5V | 77 | |
| Supply Current during Flash programming | IDD | 7.3 | 10 | mA | FOSC = 4.0 MHz, VDD = 5.5V (During Flash programming) | 77 | |
| Supply Current, HS osc (PIC16F84-10) | IDD | 5 | 10 | mA | FOSC = 10 MHz, VDD = 5.5V | 77 | |
| Power-down Current, WDT enabled, industrial | IPD | 7 | 28 | µA | VDD = 4.0V, WDT enabled, industrial | 77 | |
| Power-down Current, WDT disabled, industrial | IPD | 1 | 16 | µA | VDD = 4.0V, WDT disabled, industrial | 77 | |
| Input Low Voltage, I/O ports with TTL buffer | VIL | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 79 | ||
| Input High Voltage, I/O ports with TTL buffer | VIH | 2.4 | V | 4.5V ≤ VDD ≤ 5.5V | 79 | ||
| PORTB weak pull-up current | IPURB | 50 | 250 | 400 | µA | VDD = 5.0V, VPIN = VSS | 79 |
| Input Leakage Current, I/O ports | IIL | 1 | µA | Vss ≤ VPIN ≤ VDD, Pin at hi-impedance | 79 | ||
| Input Leakage Current, MCLR, RA4/T0CKI | IIL | 5 | µA | Vss ≤ VPIN ≤ VDD | 79 | ||
| Input Leakage Current, OSC1 | IIL | 5 | µA | Vss ≤ VPIN ≤ VDD, XT, HS and LP osc configuration | 79 | ||
| Output Low Voltage, I/O ports | VOL | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V | 79 | ||
| Output Low Voltage, OSC2/CLKOUT | VOL | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V | 79 | ||
| Capacitive loading, OSC2 pin | COSC2 | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 80 | ||
| Capacitive loading, all I/O pins and OSC2 (RC mode) | CIO | 50 | pF | 80 | |||
| Data EEPROM VDD for read/write (max) | VDRW | 6 | V | min = VMIN (minimum operating voltage) | 80 | ||
| Data EEPROM Erase/Write cycle time | TDEW | 10 | 20 | ms | 80 | ||
| Program Flash Endurance | EP | 100 | 1000 | E/W | 80 | ||
| Program Flash VDD for read (max) | VPR | 6 | V | min = VMIN (minimum operating voltage) | 80 | ||
| Program Flash VDD for erase/write | VPEW | 4.5 | 5.5 | V | 80 | ||
| Program Flash Erase/Write cycle time | TPEW | 10 | ms | 80 | |||
| External CLKIN Frequency, HS osc | FOSC | 0 | 10 | MHz | HS osc PIC16F8X-10 (min printed DC) | 82 | |
| Oscillator Frequency, HS osc | FOSC | 1 | 10 | MHz | HS osc PIC16F8X-10 | 82 | |
| External CLKIN Period, HS osc | Tosc | 100 | ns | HS osc PIC16F8X-10 | 82 | ||
| Oscillator Period, HS osc | Tosc | 100 | 1000 | ns | HS osc PIC16F8X-10 (printed 1,000) | 82 | |
| Instruction Cycle Time | TCY | 0.4 | µs | typ printed 4/Fosc, max DC | 82 | ||
| Clock in (OSC1) High or Low Time, HS osc | TosL, TosH | 35 | ns | HS osc PIC16F8X-10 | 82 | ||
| Clock in (OSC1) Rise or Fall Time, HS osc | TosR, TosF | 15 | ns | HS osc PIC16F8X-10 | 82 | ||
| OSC1 to CLKOUT low | TosH2ckL | 15 | 30 | ns | PIC16F8X, Note 1 | 83 | |
| OSC1 to CLKOUT high | TosH2ckH | 15 | 30 | ns | PIC16F8X, Note 1 | 83 | |
| CLKOUT rise time | TckR | 15 | 30 | ns | PIC16F8X, Note 1 | 83 | |
| CLKOUT fall time | TckF | 15 | 30 | ns | PIC16F8X, Note 1 | 83 | |
| Port in hold after CLKOUT | TckH2ioI | 0 | ns | Note 1 | 83 | ||
| OSC1 (Q1 cycle) to Port out valid | TosH2ioV | 125 | ns | PIC16F8X | 83 | ||
| OSC1 (Q2 cycle) to Port input invalid (I/O in hold time) | TosH2ioI | 10 | ns | PIC16F8X | 83 | ||
| Port input valid to OSC1 (I/O in setup time) | TioV2osH | -75 | ns | PIC16F8X | 83 | ||
| Port output rise time | TioR | 10 | 35 | ns | PIC16F8X | 83 | |
| Port output fall time | TioF | 10 | 35 | ns | PIC16F8X | 83 | |
| INT pin high or low time | Tinp | 20 | ns | PIC16F8X | 83 |
CAD (KiCad official)
- Symbol:
PIC16F84-10I - Footprint:
Package_DIP:DIP-18_W7.62mm - 3D model: PDIP-18 (KiCad packages3D, STEP)
- 3D model files:
pic16f84-10i-etched.step/pic16f84-10i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f84-10i.step/pic16f84-10i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (128 pp, sha256
d8643281e8b7d47e, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).