main
Ray
Publish 0.1.0
954a12f
PIC16F84-10
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · PDIP-18
PIC16F84-10 from Microchip Tech, in a PDIP-18. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RA2 | bidirectional | PORTA bi-directional I/O pin with TTL input buffer. |
| 2 | RA3 | bidirectional | PORTA bi-directional I/O pin with TTL input buffer. |
| 3 | RA4/T0CKI | bidirectional | PORTA bi-directional I/O pin with Schmitt Trigger input that can also be selected as the TMR0 timer/counter clock input (T0CKI); output is open-drain type. |
| 4 | MCLR | input | Active-low master clear (reset) input with Schmitt Trigger buffer, which also serves as the programming voltage input. |
| 5 | VSS | power_in | Ground reference for logic and I/O pins. |
| 6 | RB0/INT | bidirectional | PORTB bi-directional I/O pin with TTL/Schmitt Trigger input (Schmitt Trigger when configured as external interrupt) that can also be selected as the external interrupt pin INT. |
| 7 | RB1 | bidirectional | PORTB bi-directional I/O pin with TTL input buffer; PORTB can be software-programmed for internal weak pull-up on all inputs. |
| 8 | RB2 | bidirectional | PORTB bi-directional I/O pin with TTL input buffer; PORTB can be software-programmed for internal weak pull-up on all inputs. |
| 9 | RB3 | bidirectional | PORTB bi-directional I/O pin with TTL input buffer; PORTB can be software-programmed for internal weak pull-up on all inputs. |
| 10 | RB4 | bidirectional | PORTB bi-directional I/O pin with TTL input buffer that provides interrupt-on-change; PORTB can be software-programmed for internal weak pull-up. |
| 11 | RB5 | bidirectional | PORTB bi-directional I/O pin with TTL input buffer that provides interrupt-on-change; PORTB can be software-programmed for internal weak pull-up. |
| 12 | RB6 | bidirectional | PORTB bi-directional I/O pin with TTL/Schmitt Trigger input (Schmitt Trigger when used in serial programming) providing interrupt-on-change and serving as the serial programming clock. |
| 13 | RB7 | bidirectional | PORTB bi-directional I/O pin with TTL/Schmitt Trigger input (Schmitt Trigger when used in serial programming) providing interrupt-on-change and serving as the serial programming data. |
| 14 | VDD | power_in | Positive supply for logic and I/O pins. |
| 15 | OSC2/CLKOUT | output | Oscillator crystal output connecting to crystal or resonator in crystal oscillator mode; in RC mode it outputs CLKOUT at 1/4 the OSC1 frequency, denoting the instruction cycle rate. |
| 16 | OSC1/CLKIN | input | Oscillator crystal input or external clock source input, with Schmitt Trigger buffer in RC oscillator mode and CMOS input otherwise. |
| 17 | RA0 | bidirectional | PORTA bi-directional I/O pin with TTL input buffer. |
| 18 | RA1 | bidirectional | PORTA bi-directional I/O pin with TTL input buffer. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | PDIP-18 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 18 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (XT, RC, LP oscillator) | VDD | 4 | 6 | V | XT, RC and LP osc configuration | 77 | |
| Supply voltage (HS oscillator) | VDD | 4.5 | 5.5 | V | HS osc configuration | 77 | |
| RAM data retention voltage | VDR | 1.5 | V | Device in SLEEP mode; characterized, not tested | 77 | ||
| VDD rise rate to ensure internal power-on reset | SVDD | 0.05 | V/ms | See section on Power-on Reset; characterized, not tested | 77 | ||
| Supply current (RC and XT) | IDD | 1.8 | 4.5 | mA | RC and XT osc configuration; FOSC = 4.0 MHz, VDD = 5.5V | 77 | |
| Supply current (during Flash programming) | IDD | 7.3 | 10 | mA | FOSC = 4.0 MHz, VDD = 5.5V (during Flash programming) | 77 | |
| Supply current (HS oscillator, PIC16F84-10) | IDD | 5 | 10 | mA | HS osc configuration (PIC16F84-10); FOSC = 10 MHz, VDD = 5.5V | 77 | |
| Power-down current (WDT disabled, commercial) | IPD | 1 | 14 | µA | VDD = 4.0V, WDT disabled, commercial | 77 | |
| Input low voltage, I/O ports with TTL buffer | VIL | 0.8 | V | 4.5 V ≤ VDD ≤ 5.5 V | 79 | ||
| Input high voltage, I/O ports with TTL buffer | VIH | 2.4 | V | 4.5 V ≤ VDD ≤ 5.5 V | 79 | ||
| Input leakage current, I/O ports | IIL | 1 | µA | Vss ≤ VPIN ≤ VDD, pin at hi-impedance | 79 | ||
| Input leakage current, MCLR and RA4/T0CKI | IIL | 5 | µA | Vss ≤ VPIN ≤ VDD | 79 | ||
| Input leakage current, OSC1 | IIL | 5 | µA | Vss ≤ VPIN ≤ VDD, XT, HS and LP osc configuration | 79 | ||
| PORTB weak pull-up current | IPURB | 50 | 250 | 400 | µA | AVDD = 5.0V, VPIN = VSS; characterized, not tested | 79 |
| Output low voltage, I/O ports | VOL | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V | 79 | ||
| Output low voltage, OSC2/CLKOUT | VOL | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V | 79 | ||
| Capacitive loading, OSC2 pin | COSC2 | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 80 | ||
| Capacitive loading, all I/O pins and OSC2 (RC mode) | CIO | 50 | pF | All I/O pins and OSC2 (RC mode) | 80 | ||
| VDD for data EEPROM read/write | VDRW | 6 | V | VMIN = Minimum operating voltage | 80 | ||
| Data EEPROM erase/write cycle time | TDEW | 10 | 20 | ms | Erase/write cycle time; characterized, not tested (max) | 80 | |
| Program Flash endurance | EP | 100 | 1000 | E/W | Program Flash memory endurance | 80 | |
| VDD for program Flash read | VPR | 6 | V | VMIN = Minimum operating voltage | 80 | ||
| VDD for program Flash erase/write | VPEW | 4.5 | 5.5 | V | Program Flash erase/write | 80 | |
| External CLKIN frequency (HS) | FOSC | 10 | MHz | HS osc PIC16F8X-10 | 82 | ||
| Oscillator frequency (HS) | FOSC | 1 | 10 | MHz | HS osc PIC16F8X-10 | 82 | |
| External CLKIN period (HS) | Tosc | 100 | ns | HS osc PIC16F8X-10 | 82 | ||
| Oscillator period (HS) | Tosc | 100 | 1000 | ns | HS osc PIC16F8X-10 | 82 | |
| Instruction cycle time | 2TCY | 0.4 | µs | Note 1 | 82 | ||
| Clock in (OSC1) high or low time (HS) | TosL, TosH | 35 | ns | HS osc PIC16F8X-10; characterized, not tested | 82 | ||
| Clock in (OSC1) rise or fall time (HS) | TosR, TosF | 15 | ns | HS osc PIC16F8X-10; characterized, not tested | 82 | ||
| OSC1 to CLKOUT (falling) | TosH2ckL | 15 | 30 | ns | Note 1 (RC mode, CLKOUT = 4 x TOSC); PIC16F8X | 83 | |
| OSC1 to CLKOUT (rising) | TosH2ckH | 15 | 30 | ns | Note 1 (RC mode, CLKOUT = 4 x TOSC); PIC16F8X | 83 | |
| CLKOUT rise time | TckR | 15 | 30 | ns | Note 1; PIC16F8X | 83 | |
| CLKOUT fall time | TckF | 15 | 30 | ns | Note 1; PIC16F8X | 83 | |
| Port in hold after CLKOUT | TckH2ioI | 0 | ns | Note 1 | 83 | ||
| OSC1 (Q1 cycle) to port out valid | TosH2ioV | 125 | ns | PIC16F8X | 83 | ||
| OSC1 (Q2 cycle) to port input invalid (I/O in hold time) | TosH2ioI | 10 | ns | PIC16F8X | 83 | ||
| Port input valid to OSC1 (I/O in setup time) | TioV2osH | -75 | ns | PIC16F8X | 83 | ||
| Port output rise time | TioR | 10 | 35 | ns | PIC16F8X | 83 | |
| Port output fall time | TioF | 10 | 35 | ns | PIC16F8X | 83 | |
| INT pin high or low time | Tinp | 20 | ns | PIC16F8X | 83 | ||
| Supply voltage (absolute maximum) | VDD | -0.3 | 7.5 | V | With respect to VSS | 75 | |
| Voltage on MCLR (absolute maximum) | -0.3 | 14 | V | With respect to VSS | 75 | ||
| Ambient temperature under bias | -55 | 125 | °C | Under bias | 75 | ||
| Storage temperature | -65 | 150 | °C | 75 | |||
| Maximum current out of VSS pin | 150 | mA | 75 | ||||
| Maximum current into VDD pin | 100 | mA | 75 | ||||
| Input clamp current | IIK | 20 | mA | VI < 0 or VI > VDD | 75 | ||
| Output clamp current | IOK | 20 | mA | VO < 0 or VO > VDD | 75 | ||
| Maximum output current sourced by any I/O pin | 20 | mA | 75 | ||||
| Maximum current sunk by PORTA | 80 | mA | 75 | ||||
| Maximum current sourced by PORTA | 50 | mA | 75 | ||||
| Maximum current sunk by PORTB | 150 | mA | 75 | ||||
| Maximum current sourced by PORTB | 100 | mA | 75 | ||||
| Operating temperature (commercial) | TA | 0 | 70 | °C | Commercial | 77 |
CAD (KiCad official)
- Symbol:
PIC16F84-10 - Footprint:
Package_DIP:DIP-18_W7.62mm - 3D model: PDIP-18 (KiCad packages3D, STEP)
- 3D model files:
pic16f84-10-etched.step/pic16f84-10-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f84-10.step/pic16f84-10.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (128 pp, sha256
d8643281e8b7d47e, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PIC16F84-10
**Microchip Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · PDIP-18
PIC16F84-10 from Microchip Tech, in a PDIP-18. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RA2 | bidirectional | PORTA bi-directional I/O pin with TTL input buffer. |
| 2 | RA3 | bidirectional | PORTA bi-directional I/O pin with TTL input buffer. |
| 3 | RA4/T0CKI | bidirectional | PORTA bi-directional I/O pin with Schmitt Trigger input that can also be selected as the TMR0 timer/counter clock input (T0CKI); output is open-drain type. |
| 4 | MCLR | input | Active-low master clear (reset) input with Schmitt Trigger buffer, which also serves as the programming voltage input. |
| 5 | VSS | power_in | Ground reference for logic and I/O pins. |
| 6 | RB0/INT | bidirectional | PORTB bi-directional I/O pin with TTL/Schmitt Trigger input (Schmitt Trigger when configured as external interrupt) that can also be selected as the external interrupt pin INT. |
| 7 | RB1 | bidirectional | PORTB bi-directional I/O pin with TTL input buffer; PORTB can be software-programmed for internal weak pull-up on all inputs. |
| 8 | RB2 | bidirectional | PORTB bi-directional I/O pin with TTL input buffer; PORTB can be software-programmed for internal weak pull-up on all inputs. |
| 9 | RB3 | bidirectional | PORTB bi-directional I/O pin with TTL input buffer; PORTB can be software-programmed for internal weak pull-up on all inputs. |
| 10 | RB4 | bidirectional | PORTB bi-directional I/O pin with TTL input buffer that provides interrupt-on-change; PORTB can be software-programmed for internal weak pull-up. |
| 11 | RB5 | bidirectional | PORTB bi-directional I/O pin with TTL input buffer that provides interrupt-on-change; PORTB can be software-programmed for internal weak pull-up. |
| 12 | RB6 | bidirectional | PORTB bi-directional I/O pin with TTL/Schmitt Trigger input (Schmitt Trigger when used in serial programming) providing interrupt-on-change and serving as the serial programming clock. |
| 13 | RB7 | bidirectional | PORTB bi-directional I/O pin with TTL/Schmitt Trigger input (Schmitt Trigger when used in serial programming) providing interrupt-on-change and serving as the serial programming data. |
| 14 | VDD | power_in | Positive supply for logic and I/O pins. |
| 15 | OSC2/CLKOUT | output | Oscillator crystal output connecting to crystal or resonator in crystal oscillator mode; in RC mode it outputs CLKOUT at 1/4 the OSC1 frequency, denoting the instruction cycle rate. |
| 16 | OSC1/CLKIN | input | Oscillator crystal input or external clock source input, with Schmitt Trigger buffer in RC oscillator mode and CMOS input otherwise. |
| 17 | RA0 | bidirectional | PORTA bi-directional I/O pin with TTL input buffer. |
| 18 | RA1 | bidirectional | PORTA bi-directional I/O pin with TTL input buffer. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | PDIP-18 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 18 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (XT, RC, LP oscillator) | VDD | 4 | | 6 | V | XT, RC and LP osc configuration | 77 |
| Supply voltage (HS oscillator) | VDD | 4.5 | | 5.5 | V | HS osc configuration | 77 |
| RAM data retention voltage | VDR | 1.5 | | | V | Device in SLEEP mode; characterized, not tested | 77 |
| VDD rise rate to ensure internal power-on reset | SVDD | 0.05 | | | V/ms | See section on Power-on Reset; characterized, not tested | 77 |
| Supply current (RC and XT) | IDD | | 1.8 | 4.5 | mA | RC and XT osc configuration; FOSC = 4.0 MHz, VDD = 5.5V | 77 |
| Supply current (during Flash programming) | IDD | | 7.3 | 10 | mA | FOSC = 4.0 MHz, VDD = 5.5V (during Flash programming) | 77 |
| Supply current (HS oscillator, PIC16F84-10) | IDD | | 5 | 10 | mA | HS osc configuration (PIC16F84-10); FOSC = 10 MHz, VDD = 5.5V | 77 |
| Power-down current (WDT disabled, commercial) | IPD | | 1 | 14 | µA | VDD = 4.0V, WDT disabled, commercial | 77 |
| Input low voltage, I/O ports with TTL buffer | VIL | | | 0.8 | V | 4.5 V ≤ VDD ≤ 5.5 V | 79 |
| Input high voltage, I/O ports with TTL buffer | VIH | 2.4 | | | V | 4.5 V ≤ VDD ≤ 5.5 V | 79 |
| Input leakage current, I/O ports | IIL | | | 1 | µA | Vss ≤ VPIN ≤ VDD, pin at hi-impedance | 79 |
| Input leakage current, MCLR and RA4/T0CKI | IIL | | | 5 | µA | Vss ≤ VPIN ≤ VDD | 79 |
| Input leakage current, OSC1 | IIL | | | 5 | µA | Vss ≤ VPIN ≤ VDD, XT, HS and LP osc configuration | 79 |
| PORTB weak pull-up current | IPURB | 50 | 250 | 400 | µA | AVDD = 5.0V, VPIN = VSS; characterized, not tested | 79 |
| Output low voltage, I/O ports | VOL | | | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V | 79 |
| Output low voltage, OSC2/CLKOUT | VOL | | | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V | 79 |
| Capacitive loading, OSC2 pin | COSC2 | | | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 80 |
| Capacitive loading, all I/O pins and OSC2 (RC mode) | CIO | | | 50 | pF | All I/O pins and OSC2 (RC mode) | 80 |
| VDD for data EEPROM read/write | VDRW | | | 6 | V | VMIN = Minimum operating voltage | 80 |
| Data EEPROM erase/write cycle time | TDEW | | 10 | 20 | ms | Erase/write cycle time; characterized, not tested (max) | 80 |
| Program Flash endurance | EP | 100 | 1000 | | E/W | Program Flash memory endurance | 80 |
| VDD for program Flash read | VPR | | | 6 | V | VMIN = Minimum operating voltage | 80 |
| VDD for program Flash erase/write | VPEW | 4.5 | | 5.5 | V | Program Flash erase/write | 80 |
| External CLKIN frequency (HS) | FOSC | | | 10 | MHz | HS osc PIC16F8X-10 | 82 |
| Oscillator frequency (HS) | FOSC | 1 | | 10 | MHz | HS osc PIC16F8X-10 | 82 |
| External CLKIN period (HS) | Tosc | 100 | | | ns | HS osc PIC16F8X-10 | 82 |
| Oscillator period (HS) | Tosc | 100 | | 1000 | ns | HS osc PIC16F8X-10 | 82 |
| Instruction cycle time | 2TCY | 0.4 | | | µs | Note 1 | 82 |
| Clock in (OSC1) high or low time (HS) | TosL, TosH | 35 | | | ns | HS osc PIC16F8X-10; characterized, not tested | 82 |
| Clock in (OSC1) rise or fall time (HS) | TosR, TosF | 15 | | | ns | HS osc PIC16F8X-10; characterized, not tested | 82 |
| OSC1 to CLKOUT (falling) | TosH2ckL | | 15 | 30 | ns | Note 1 (RC mode, CLKOUT = 4 x TOSC); PIC16F8X | 83 |
| OSC1 to CLKOUT (rising) | TosH2ckH | | 15 | 30 | ns | Note 1 (RC mode, CLKOUT = 4 x TOSC); PIC16F8X | 83 |
| CLKOUT rise time | TckR | | 15 | 30 | ns | Note 1; PIC16F8X | 83 |
| CLKOUT fall time | TckF | | 15 | 30 | ns | Note 1; PIC16F8X | 83 |
| Port in hold after CLKOUT | TckH2ioI | 0 | | | ns | Note 1 | 83 |
| OSC1 (Q1 cycle) to port out valid | TosH2ioV | | | 125 | ns | PIC16F8X | 83 |
| OSC1 (Q2 cycle) to port input invalid (I/O in hold time) | TosH2ioI | 10 | | | ns | PIC16F8X | 83 |
| Port input valid to OSC1 (I/O in setup time) | TioV2osH | -75 | | | ns | PIC16F8X | 83 |
| Port output rise time | TioR | | 10 | 35 | ns | PIC16F8X | 83 |
| Port output fall time | TioF | | 10 | 35 | ns | PIC16F8X | 83 |
| INT pin high or low time | Tinp | 20 | | | ns | PIC16F8X | 83 |
| Supply voltage (absolute maximum) | VDD | -0.3 | | 7.5 | V | With respect to VSS | 75 |
| Voltage on MCLR (absolute maximum) | | -0.3 | | 14 | V | With respect to VSS | 75 |
| Ambient temperature under bias | | -55 | | 125 | °C | Under bias | 75 |
| Storage temperature | | -65 | | 150 | °C | | 75 |
| Maximum current out of VSS pin | | | | 150 | mA | | 75 |
| Maximum current into VDD pin | | | | 100 | mA | | 75 |
| Input clamp current | IIK | | | 20 | mA | VI < 0 or VI > VDD | 75 |
| Output clamp current | IOK | | | 20 | mA | VO < 0 or VO > VDD | 75 |
| Maximum output current sourced by any I/O pin | | | | 20 | mA | | 75 |
| Maximum current sunk by PORTA | | | | 80 | mA | | 75 |
| Maximum current sourced by PORTA | | | | 50 | mA | | 75 |
| Maximum current sunk by PORTB | | | | 150 | mA | | 75 |
| Maximum current sourced by PORTB | | | | 100 | mA | | 75 |
| Operating temperature (commercial) | TA | 0 | | 70 | °C | Commercial | 77 |
## CAD (KiCad official)
- Symbol: `PIC16F84-10`
- Footprint: `Package_DIP:DIP-18_W7.62mm`
- 3D model: PDIP-18 (KiCad packages3D, STEP)
- 3D model files: `pic16f84-10-etched.step` / `pic16f84-10-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic16f84-10.step` / `pic16f84-10.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/pic16f84-10-datasheet.pdf) (128 pp, sha256 `d8643281e8b7d47e`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic16f84-10-datasheet.pdf)