← Commit history

Publish 0.1.1

Ray ·b91ced08cc · ·parent d1b8892
4 files changed +126−114
README.md+55−54
@@ -8,24 +8,24 @@ PIC16F84-04 from Microchip Tech, in a SOIC-18-300mil. Pinout and pin description  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | RA2 | bidirectional | PORTA bidirectional I/O pin with TTL input levels, direction set by TRISA<2>. |-| 2 | RA3 | bidirectional | PORTA bidirectional I/O pin with TTL input levels, direction set by TRISA<3>. |-| 3 | RA4/T0CKI | bidirectional | Bidirectional I/O pin with Schmitt Trigger input that can also serve as the clock input to TMR0; its output is open drain type. |-| 4 | MCLR | input | Master clear input that acts as an active-low reset to the device and also serves as the programming voltage input; Schmitt Trigger input. |+| 1 | RA2 | bidirectional | PORTA bidirectional I/O pin with TTL input levels and full CMOS output drivers; direction is set by TRISA<2>. |+| 2 | RA3 | bidirectional | PORTA bidirectional I/O pin with TTL input levels and full CMOS output drivers; direction is set by TRISA<3>. |+| 3 | RA4/T0CKI | bidirectional | PORTA bidirectional I/O pin with Schmitt Trigger input that can also serve as the TMR0 clock input; the output is open drain. |+| 4 | MCLR | input | Active-low master clear (reset) input with Schmitt Trigger buffer, which also receives the programming voltage VIHH during programming. | | 5 | VSS | power_in | Ground reference for logic and I/O pins. |-| 6 | RB0/INT | bidirectional | Bidirectional I/O pin with TTL/Schmitt Trigger input that can also be selected as the external interrupt pin; internal software-programmable weak pull-up. |-| 7 | RB1 | bidirectional | Bidirectional I/O pin with TTL input and internal software-programmable weak pull-up. |-| 8 | RB2 | bidirectional | Bidirectional I/O pin with TTL input and internal software-programmable weak pull-up. |-| 9 | RB3 | bidirectional | Bidirectional I/O pin with TTL input and internal software-programmable weak pull-up. |-| 10 | RB4 | bidirectional | Bidirectional I/O pin with TTL input, interrupt-on-change pin, and internal software-programmable weak pull-up. |-| 11 | RB5 | bidirectional | Bidirectional I/O pin with TTL input, interrupt-on-change pin, and internal software-programmable weak pull-up. |-| 12 | RB6 | bidirectional | Bidirectional I/O pin with TTL/Schmitt Trigger input and interrupt-on-change; serves as the serial programming clock (Schmitt Trigger input in programming mode). |-| 13 | RB7 | bidirectional | Bidirectional I/O pin with TTL/Schmitt Trigger input and interrupt-on-change; serves as the serial programming data (Schmitt Trigger input in programming mode). |-| 14 | VDD | power_in | Positive supply for logic and I/O pins. |-| 15 | OSC2/CLKOUT | output | Oscillator crystal output connecting to the crystal or resonator in crystal mode; in RC mode it outputs CLKOUT at 1/4 the OSC1 frequency, denoting the instruction cycle rate. |+| 6 | RB0/INT | bidirectional | PORTB bidirectional I/O pin with TTL input (Schmitt Trigger when used as external interrupt INT) and software-programmable weak pull-up. |+| 7 | RB1 | bidirectional | PORTB bidirectional I/O pin with TTL input levels and software-programmable weak pull-up. |+| 8 | RB2 | bidirectional | PORTB bidirectional I/O pin with TTL input levels and software-programmable weak pull-up. |+| 9 | RB3 | bidirectional | PORTB bidirectional I/O pin with TTL input levels and software-programmable weak pull-up. |+| 10 | RB4 | bidirectional | PORTB bidirectional I/O pin with TTL input levels, software-programmable weak pull-up, and interrupt-on-change capability. |+| 11 | RB5 | bidirectional | PORTB bidirectional I/O pin with TTL input levels, software-programmable weak pull-up, and interrupt-on-change capability. |+| 12 | RB6 | bidirectional | PORTB bidirectional I/O pin with interrupt-on-change capability; it is the serial programming clock with Schmitt Trigger input in programming mode. |+| 13 | RB7 | bidirectional | PORTB bidirectional I/O pin with interrupt-on-change capability; it is the serial programming data pin with Schmitt Trigger input in programming mode. |+| 14 | VDD | power_in | Positive supply for logic and I/O pins; 4.0 V to 6.0 V for XT, RC and LP oscillator configurations and 4.5 V to 5.5 V for HS (PIC16F84 standard range). |+| 15 | OSC2/CLKOUT | output | Oscillator crystal output connecting to the crystal or resonator in crystal mode; in RC mode it outputs CLKOUT at 1/4 the OSC1 frequency. | | 16 | OSC1/CLKIN | input | Oscillator crystal input or external clock source input; Schmitt Trigger input in RC mode and CMOS input otherwise. |-| 17 | RA0 | bidirectional | PORTA bidirectional I/O pin with TTL input levels, direction set by TRISA<0>. |-| 18 | RA1 | bidirectional | PORTA bidirectional I/O pin with TTL input levels, direction set by TRISA<1>. |+| 17 | RA0 | bidirectional | PORTA bidirectional I/O pin with TTL input levels and full CMOS output drivers; direction is set by TRISA<0>. |+| 18 | RA1 | bidirectional | PORTA bidirectional I/O pin with TTL input levels and full CMOS output drivers; direction is set by TRISA<1>. |  ## Key specifications @@ -42,57 +42,58 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| VDD supply voltage (XT, RC and LP osc) | VDD | 4 |  | 6 | V | XT, RC and LP osc configuration | 77 |-| VDD supply voltage (HS osc) | VDD | 4.5 |  | 5.5 | V | HS osc configuration | 77 |-| Operating temperature | TA | 0 |  | 70 | °C | commercial | 76 |-| RAM data retention voltage | VDR | 1.5 |  |  | V | Device in SLEEP mode | 77 |-| VDD rise rate to ensure internal Power-on Reset | SVDD | 0.05 |  |  | V/ms | See section on Power-on Reset for details | 77 |-| Supply current, RC and XT osc | IDD |  | 1.8 | 4.5 | mA | RC and XT osc configuration(4); FOSC = 4.0 MHz, VDD = 5.5V | 77 |-| Supply current during Flash programming | IDD |  | 7.3 | 10 | mA | FOSC = 4.0 MHz, VDD = 5.5V (During Flash programming) | 77 |-| Power-down current, WDT disabled, commercial | IPD |  | 1 | 14 | µA | VDD = 4.0V, WDT disabled, commercial | 77 |-| Input low voltage, TTL buffer | VIL |  |  | 0.8 | V | 4.5 V ≤ VDD ≤ 5.5 V(4) | 79 |-| Input high voltage, TTL buffer | VIH | 2.4 |  |  | V | 4.5 V ≤ VDD ≤ 5.5V(4) | 79 |-| Input leakage current, I/O ports | IIL |  |  | 1 | µA | Vss ≤ VPIN ≤ VDD, pin at hi-impedance | 79 |-| Input leakage current, MCLR, RA4/T0CKI | IIL |  |  | 5 | µA | Vss ≤ VPIN ≤ VDD | 79 |-| Input leakage current, OSC1 | IIL |  |  | 5 | µA | Vss ≤ VPIN ≤ VDD, XT, HS and LP osc configuration | 79 |-| PORTB weak pull-up current | IPURB | 50 | 250 | 400 | µA | AVDD = 5.0V, VPIN = VSS | 79 |-| Output low voltage, I/O ports | VOL |  |  | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V | 79 |-| Output low voltage, OSC2/CLKOUT | VOL |  |  | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V | 79 |-| OSC2 pin capacitive loading | COSC2 |  |  | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1. | 80 |-| All I/O pins and OSC2 (RC mode) capacitive loading | CIO |  |  | 50 | pF |  | 80 |-| Data EEPROM endurance | ED | 1 | 10 |  | M E/W | 25C at 5V | 80 |-| Data EEPROM erase/write cycle time | TDEW |  | 10 | 20 | ms |  | 80 |-| Program Flash endurance | EP | 100 | 1000 |  | E/W |  | 80 |-| VDD for read/write (data EEPROM) | VDRW |  |  | 6 | V | VMIN = Minimum operating voltage | 80 |-| VDD for read (program Flash) | VPR |  |  | 6 | V | VMIN = Minimum operating voltage | 80 |-| VDD for erase/write (program Flash) | VPEW | 4.5 |  | 5.5 | V |  | 80 |-| Program Flash erase/write cycle time | TPEW |  | 10 |  | ms |  | 80 | | Ambient temperature under bias |  | -55 |  | 125 | °C |  | 75 | | Storage temperature |  | -65 |  | 150 | °C |  | 75 | | Voltage on VDD with respect to VSS | VDD | -0.3 |  | 7.5 | V |  | 75 |-| Voltage on MCLR with respect to VSS |  | -0.3 |  | 14 | V |  | 75 |+| Voltage on MCLR with respect to VSS |  | -0.3 |  | 14 | V | Note 2 | 75 |+| Voltage on any pin with respect to VSS (except VDD and MCLR) |  | -0.6 |  |  | V | Maximum printed as VDD + 0.6V; not numeric | 75 | | Maximum current out of VSS pin |  |  |  | 150 | mA |  | 75 | | Maximum current into VDD pin |  |  |  | 100 | mA |  | 75 |-| Input clamp current, IIK | IIK |  |  | 20 | mA | VI < 0 or VI > VDD | 75 |-| Output clamp current, IOK | IOK |  |  | 20 | mA | VO < 0 or VO > VDD | 75 |+| Input clamp current | IIK |  |  | 20 | mA | VI < 0 or VI > VDD | 75 |+| Output clamp current | IOK |  |  | 20 | mA | VO < 0 or VO > VDD | 75 | | Maximum output current sourced by any I/O pin |  |  |  | 20 | mA |  | 75 | | Maximum current sunk by PORTA |  |  |  | 80 | mA |  | 75 | | Maximum current sourced by PORTA |  |  |  | 50 | mA |  | 75 | | Maximum current sunk by PORTB |  |  |  | 150 | mA |  | 75 | | Maximum current sourced by PORTB |  |  |  | 100 | mA |  | 75 |+| Operating temperature range (commercial) | TA | 0 |  | 70 | °C | Commercial | 77 |+| VDD supply voltage | VDD | 4 |  | 6 | V | XT, RC and LP osc configuration | 77 |+| VDD supply voltage (HS) | VDD | 4.5 |  | 5.5 | V | HS osc configuration | 77 |+| RAM data retention voltage | VDR | 1.5 |  |  | V | Device in SLEEP mode | 77 |+| VDD rise rate to ensure internal Power-on Reset signal | SVDD | 0.05 |  |  | V/ms | See section on Power-on Reset for details | 77 |+| Supply current (IDD) | IDD |  | 1.8 | 4.5 | mA | RC and XT osc configuration; FOSC = 4.0 MHz, VDD = 5.5V | 77 |+| Supply current during Flash programming | IDD |  | 7.3 | 10 | mA | FOSC = 4.0 MHz, VDD = 5.5V (during Flash programming) | 77 |+| Power-down current (IPD) | IPD |  | 1 | 14 | µA | VDD = 4.0V, WDT disabled, commercial | 77 |+| Input low voltage, I/O ports with TTL buffer | VIL |  |  | 0.8 | V | 4.5 V ≤ VDD ≤ 5.5 V | 79 |+| Input high voltage, I/O ports with TTL buffer | VIH | 2.4 |  |  | V | 4.5 V ≤ VDD ≤ 5.5 V | 79 |+| PORTB weak pull-up current | IPURB | 50 | 250 | 400 | µA | AVDD = 5.0V, VPIN = VSS | 79 |+| Input leakage current, I/O ports | IIL |  |  | 1 | µA | VSS ≤ VPIN ≤ VDD, pin at hi-impedance | 79 |+| Input leakage current, MCLR and RA4/T0CKI | IIL |  |  | 5 | µA | VSS ≤ VPIN ≤ VDD | 79 |+| Input leakage current, OSC1 | IIL |  |  | 5 | µA | VSS ≤ VPIN ≤ VDD, XT, HS and LP osc configuration | 79 |+| Output low voltage, I/O ports | VOL |  |  | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V | 79 |+| Output low voltage, OSC2/CLKOUT | VOL |  |  | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V | 79 |+| Capacitive loading on OSC2 pin | COSC2 |  |  | 15 | pF | XT, HS and LP modes when external clock is used to drive OSC1 | 80 |+| Capacitive loading on all I/O pins and OSC2 (RC mode) | CIO |  |  | 50 | pF |  | 80 |+| Data EEPROM endurance | ED | 1 | 10 |  | M E/W | 25°C at 5V | 80 |+| VDD for data EEPROM read/write | VDRW |  |  | 6 | V | VMIN = Minimum operating voltage | 80 |+| Data EEPROM erase/write cycle time | TDEW |  | 10 | 20 | ms |  | 80 |+| Program Flash endurance | EP | 100 | 1000 |  | E/W |  | 80 |+| VDD for Flash read | VPR |  |  | 6 | V | VMIN = Minimum operating voltage | 80 |+| VDD for Flash erase/write | VPEW | 4.5 |  | 5.5 | V |  | 80 | | External CLKIN frequency | FOSC |  |  | 4 | MHz | XT, RC osc PIC16F8X-04 | 82 |-| Oscillator frequency, XT | FOSC | 0.1 |  | 4 | MHz | XT osc PIC16F8X-04 | 82 |-| Oscillator frequency, RC | FOSC |  |  | 4 | MHz | RC osc PIC16F8X-04 | 82 |+| Oscillator frequency (RC) | FOSC |  |  | 4 | MHz | RC osc PIC16F8X-04 | 82 |+| Oscillator frequency (XT) | FOSC | 0.1 |  | 4 | MHz | XT osc PIC16F8X-04 | 82 | | External CLKIN period | Tosc | 250 |  |  | ns | XT, RC osc PIC16F8X-04 | 82 |-| Oscillator period, XT | Tosc | 250 |  | 10000 | ns | XT osc PIC16F8X-04 | 82 |-| Oscillator period, RC | Tosc | 250 |  |  | ns | RC osc PIC16F8X-04 | 82 |-| Instruction cycle time | 2TCY | 0.4 |  |  | µs |  | 82 |+| Oscillator period (RC) | Tosc | 250 |  |  | ns | RC osc PIC16F8X-04 | 82 |+| Oscillator period (XT) | Tosc | 250 |  | 10000 | ns | XT osc PIC16F8X-04 | 82 |+| Instruction cycle time | 2TCY | 0.4 |  |  | µs | Note 1 | 82 | | Clock in (OSC1) high or low time | TosL, TosH | 50 |  |  | ns | XT osc PIC16F8X-04 | 82 | | Clock in (OSC1) rise or fall time | TosR, TosF | 25 |  |  | ns | XT osc PIC16F8X-04 | 82 |-| OSC1 to CLKOUT | TosH2ckL |  | 15 | 30 | ns | Note 1 (RC mode, CLKOUT = 4 x TOSC) | 83 |-| CLKOUT rise time | TckR |  | 15 | 30 | ns | Note 1 (RC mode, CLKOUT = 4 x TOSC) | 83 |-| CLKOUT fall time | TckF |  | 15 | 30 | ns | Note 1 (RC mode, CLKOUT = 4 x TOSC) | 83 |-| Port in hold after CLKOUT | TckH2ioI | 0 |  |  | ns | Note 1 (RC mode, CLKOUT = 4 x TOSC) | 83 |+| OSC1 to CLKOUT (falling) | TosH2ckL |  | 15 | 30 | ns | PIC16F8X; Note 1 (RC mode) | 83 |+| OSC1 to CLKOUT (rising) | TosH2ckH |  | 15 | 30 | ns | PIC16F8X; Note 1 (RC mode) | 83 |+| CLKOUT rise time | TckR |  | 15 | 30 | ns | PIC16F8X; Note 1 | 83 |+| CLKOUT fall time | TckF |  | 15 | 30 | ns | PIC16F8X; Note 1 | 83 |+| Port in hold after CLKOUT | TckH2ioI | 0 |  |  | ns | Note 1 | 83 | | OSC1 (Q1 cycle) to port out valid | TosH2ioV |  |  | 125 | ns | PIC16F8X | 83 | | OSC1 (Q2 cycle) to port input invalid (I/O in hold time) | TosH2ioI | 10 |  |  | ns | PIC16F8X | 83 | | Port input valid to OSC1 (I/O in setup time) | TioV2osH | -75 |  |  | ns | PIC16F8X | 83 |@@ -111,7 +112,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Microchip Tech datasheet](http://ww1.microchip.com/downloads/en/DeviceDoc/30430D.pdf) (128 pp, sha256 `d8643281e8b7d47e`, retrieved 2026-11-12, tier: manufacturer)+- **Datasheet:** [Microchip Tech datasheet](http://ww1.microchip.com/downloads/en/DeviceDoc/30430D.pdf) (128 pp, sha256 `d8643281e8b7d47e`, retrieved 2026-11-17, tier: manufacturer) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
package.json+27−28
@@ -1,6 +1,6 @@ {   "slug": "pic16f84-04-so",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-18-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -28,8 +28,7 @@     "viewers/symbol.html",     "viewers/footprint.html",     "pic16f84-04-so-hero.glb",-    "pic16f84-04-so-hero.overlay.json",-    "pic16f84-04-so-etched.glb"+    "pic16f84-04-so-hero.overlay.json"   ],   "component": {     "mpn": "PIC16F84-04/SO",@@ -43,7 +42,7 @@       "symbol": "pic16f84-04-so.kicad_sym",       "footprint": "pic16f84-04-so.kicad_mod",       "model_3d": "pic16f84-04-so-hero.glb",-      "model_3d_plain": "pic16f84-04-so-etched.glb",+      "model_3d_plain": "pic16f84-04-so.glb",       "model_3d_step": "pic16f84-04-so-etched.step",       "model_3d_step_plain": "pic16f84-04-so.step",       "lbr": "pic16f84-04-so.lbr"@@ -54,7 +53,7 @@       "mouser": "579-PIC16F84-04/SO"     },     "distributor_check": {-      "checked_at": "2026-11-12T17:40:42Z",+      "checked_at": "2026-11-17T19:10:00Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "PIC16F84-04/SO-ND",@@ -71,25 +70,25 @@         "number": "1",         "name": "RA2",         "type": "bidirectional",-        "description": "PORTA bidirectional I/O pin with TTL input levels, direction set by TRISA<2>."+        "description": "PORTA bidirectional I/O pin with TTL input levels and full CMOS output drivers; direction is set by TRISA<2>."       },       {         "number": "2",         "name": "RA3",         "type": "bidirectional",-        "description": "PORTA bidirectional I/O pin with TTL input levels, direction set by TRISA<3>."+        "description": "PORTA bidirectional I/O pin with TTL input levels and full CMOS output drivers; direction is set by TRISA<3>."       },       {         "number": "3",         "name": "RA4/T0CKI",         "type": "bidirectional",-        "description": "Bidirectional I/O pin with Schmitt Trigger input that can also serve as the clock input to TMR0; its output is open drain type."+        "description": "PORTA bidirectional I/O pin with Schmitt Trigger input that can also serve as the TMR0 clock input; the output is open drain."       },       {         "number": "4",         "name": "MCLR",         "type": "input",-        "description": "Master clear input that acts as an active-low reset to the device and also serves as the programming voltage input; Schmitt Trigger input."+        "description": "Active-low master clear (reset) input with Schmitt Trigger buffer, which also receives the programming voltage VIHH during programming."       },       {         "number": "5",@@ -101,61 +100,61 @@         "number": "6",         "name": "RB0/INT",         "type": "bidirectional",-        "description": "Bidirectional I/O pin with TTL/Schmitt Trigger input that can also be selected as the external interrupt pin; internal software-programmable weak pull-up."+        "description": "PORTB bidirectional I/O pin with TTL input (Schmitt Trigger when used as external interrupt INT) and software-programmable weak pull-up."       },       {         "number": "7",         "name": "RB1",         "type": "bidirectional",-        "description": "Bidirectional I/O pin with TTL input and internal software-programmable weak pull-up."+        "description": "PORTB bidirectional I/O pin with TTL input levels and software-programmable weak pull-up."       },       {         "number": "8",         "name": "RB2",         "type": "bidirectional",-        "description": "Bidirectional I/O pin with TTL input and internal software-programmable weak pull-up."+        "description": "PORTB bidirectional I/O pin with TTL input levels and software-programmable weak pull-up."       },       {         "number": "9",         "name": "RB3",         "type": "bidirectional",-        "description": "Bidirectional I/O pin with TTL input and internal software-programmable weak pull-up."+        "description": "PORTB bidirectional I/O pin with TTL input levels and software-programmable weak pull-up."       },       {         "number": "10",         "name": "RB4",         "type": "bidirectional",-        "description": "Bidirectional I/O pin with TTL input, interrupt-on-change pin, and internal software-programmable weak pull-up."+        "description": "PORTB bidirectional I/O pin with TTL input levels, software-programmable weak pull-up, and interrupt-on-change capability."       },       {         "number": "11",         "name": "RB5",         "type": "bidirectional",-        "description": "Bidirectional I/O pin with TTL input, interrupt-on-change pin, and internal software-programmable weak pull-up."+        "description": "PORTB bidirectional I/O pin with TTL input levels, software-programmable weak pull-up, and interrupt-on-change capability."       },       {         "number": "12",         "name": "RB6",         "type": "bidirectional",-        "description": "Bidirectional I/O pin with TTL/Schmitt Trigger input and interrupt-on-change; serves as the serial programming clock (Schmitt Trigger input in programming mode)."+        "description": "PORTB bidirectional I/O pin with interrupt-on-change capability; it is the serial programming clock with Schmitt Trigger input in programming mode."       },       {         "number": "13",         "name": "RB7",         "type": "bidirectional",-        "description": "Bidirectional I/O pin with TTL/Schmitt Trigger input and interrupt-on-change; serves as the serial programming data (Schmitt Trigger input in programming mode)."+        "description": "PORTB bidirectional I/O pin with interrupt-on-change capability; it is the serial programming data pin with Schmitt Trigger input in programming mode."       },       {         "number": "14",         "name": "VDD",         "type": "power_in",-        "description": "Positive supply for logic and I/O pins."+        "description": "Positive supply for logic and I/O pins; 4.0 V to 6.0 V for XT, RC and LP oscillator configurations and 4.5 V to 5.5 V for HS (PIC16F84 standard range)."       },       {         "number": "15",         "name": "OSC2/CLKOUT",         "type": "output",-        "description": "Oscillator crystal output connecting to the crystal or resonator in crystal mode; in RC mode it outputs CLKOUT at 1/4 the OSC1 frequency, denoting the instruction cycle rate."+        "description": "Oscillator crystal output connecting to the crystal or resonator in crystal mode; in RC mode it outputs CLKOUT at 1/4 the OSC1 frequency."       },       {         "number": "16",@@ -167,13 +166,13 @@         "number": "17",         "name": "RA0",         "type": "bidirectional",-        "description": "PORTA bidirectional I/O pin with TTL input levels, direction set by TRISA<0>."+        "description": "PORTA bidirectional I/O pin with TTL input levels and full CMOS output drivers; direction is set by TRISA<0>."       },       {         "number": "18",         "name": "RA1",         "type": "bidirectional",-        "description": "PORTA bidirectional I/O pin with TTL input levels, direction set by TRISA<1>."+        "description": "PORTA bidirectional I/O pin with TTL input levels and full CMOS output drivers; direction is set by TRISA<1>."       }     ],     "provenance": {@@ -187,11 +186,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Pin numbers are taken from the SOIC column of Table 3-1 (page 9), which matches the SOIC pin diagram; The datasheet gives no per-pin electrical limits in the pinout table; descriptions reflect only the "+          "extractor flagged: The datasheet gives one pin table (Table 3-1) with identical DIP and SOIC pin numbers; the SOIC-18-3; KiCad types are mapped by me from the datasheet's buffer descriptions: PORTA/PORTB I/O pins are set ; VDD description quotes the PIC16F84 DC characteristics (D001/D001A, page 77), which give different r"         ],         "pages_sent": 128,-        "cost_usd": 0.5676,-        "at": "2026-11-12T17:40:20"+        "cost_usd": 0.5722,+        "at": "2026-11-17T19:09:29"       },       "datasheet": {         "url": "http://ww1.microchip.com/downloads/en/DeviceDoc/30430D.pdf",@@ -228,7 +227,7 @@         "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "05ad7d4945131c76ec7b9448dd9cbb5376b56adcd564c58d93e50ca7870fab1f",-        "checked": "2026-11-12",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -246,13 +245,13 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "677f677ab7c99fa7e45470cdb2a3ffaacde6e0790f9a8e2fa7dbc108aa9bbc54",-        "checked": "2026-11-12",+        "sha256": "97d31c20acc65ec9016e1292ccd87a8941f6bf91b55ba1f2e3862ea8866f7743",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],     "package_dims": {-      "package_code": "SO (K04-051, 18-Lead Plastic Small Outline, Wide 300 mil)",+      "package_code": "SO (18-Lead Plastic Small Outline, Wide, 300 mil)",       "source_page": 113,       "D": {         "nom_mm": 11.58,
page.json+30−29
@@ -4,7 +4,7 @@   "slug": "pic16f84-04-so",   "title": "PIC16F84-04/SO",   "brief": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-18-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -25,7 +25,7 @@       "symbol": "pic16f84-04-so.kicad_sym",       "footprint": "pic16f84-04-so.kicad_mod",       "model_3d": "pic16f84-04-so-hero.glb",-      "model_3d_plain": "pic16f84-04-so-etched.glb",+      "model_3d_plain": "pic16f84-04-so.glb",       "model_3d_step": "pic16f84-04-so-etched.step",       "model_3d_step_plain": "pic16f84-04-so.step",       "lbr": "pic16f84-04-so.lbr"@@ -36,7 +36,7 @@       "mouser": "579-PIC16F84-04/SO"     },     "distributor_check": {-      "checked_at": "2026-11-12T17:40:42Z",+      "checked_at": "2026-11-17T19:10:00Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "PIC16F84-04/SO-ND",@@ -53,25 +53,25 @@         "number": "1",         "name": "RA2",         "type": "bidirectional",-        "description": "PORTA bidirectional I/O pin with TTL input levels, direction set by TRISA<2>."+        "description": "PORTA bidirectional I/O pin with TTL input levels and full CMOS output drivers; direction is set by TRISA<2>."       },       {         "number": "2",         "name": "RA3",         "type": "bidirectional",-        "description": "PORTA bidirectional I/O pin with TTL input levels, direction set by TRISA<3>."+        "description": "PORTA bidirectional I/O pin with TTL input levels and full CMOS output drivers; direction is set by TRISA<3>."       },       {         "number": "3",         "name": "RA4/T0CKI",         "type": "bidirectional",-        "description": "Bidirectional I/O pin with Schmitt Trigger input that can also serve as the clock input to TMR0; its output is open drain type."+        "description": "PORTA bidirectional I/O pin with Schmitt Trigger input that can also serve as the TMR0 clock input; the output is open drain."       },       {         "number": "4",         "name": "MCLR",         "type": "input",-        "description": "Master clear input that acts as an active-low reset to the device and also serves as the programming voltage input; Schmitt Trigger input."+        "description": "Active-low master clear (reset) input with Schmitt Trigger buffer, which also receives the programming voltage VIHH during programming."       },       {         "number": "5",@@ -83,61 +83,61 @@         "number": "6",         "name": "RB0/INT",         "type": "bidirectional",-        "description": "Bidirectional I/O pin with TTL/Schmitt Trigger input that can also be selected as the external interrupt pin; internal software-programmable weak pull-up."+        "description": "PORTB bidirectional I/O pin with TTL input (Schmitt Trigger when used as external interrupt INT) and software-programmable weak pull-up."       },       {         "number": "7",         "name": "RB1",         "type": "bidirectional",-        "description": "Bidirectional I/O pin with TTL input and internal software-programmable weak pull-up."+        "description": "PORTB bidirectional I/O pin with TTL input levels and software-programmable weak pull-up."       },       {         "number": "8",         "name": "RB2",         "type": "bidirectional",-        "description": "Bidirectional I/O pin with TTL input and internal software-programmable weak pull-up."+        "description": "PORTB bidirectional I/O pin with TTL input levels and software-programmable weak pull-up."       },       {         "number": "9",         "name": "RB3",         "type": "bidirectional",-        "description": "Bidirectional I/O pin with TTL input and internal software-programmable weak pull-up."+        "description": "PORTB bidirectional I/O pin with TTL input levels and software-programmable weak pull-up."       },       {         "number": "10",         "name": "RB4",         "type": "bidirectional",-        "description": "Bidirectional I/O pin with TTL input, interrupt-on-change pin, and internal software-programmable weak pull-up."+        "description": "PORTB bidirectional I/O pin with TTL input levels, software-programmable weak pull-up, and interrupt-on-change capability."       },       {         "number": "11",         "name": "RB5",         "type": "bidirectional",-        "description": "Bidirectional I/O pin with TTL input, interrupt-on-change pin, and internal software-programmable weak pull-up."+        "description": "PORTB bidirectional I/O pin with TTL input levels, software-programmable weak pull-up, and interrupt-on-change capability."       },       {         "number": "12",         "name": "RB6",         "type": "bidirectional",-        "description": "Bidirectional I/O pin with TTL/Schmitt Trigger input and interrupt-on-change; serves as the serial programming clock (Schmitt Trigger input in programming mode)."+        "description": "PORTB bidirectional I/O pin with interrupt-on-change capability; it is the serial programming clock with Schmitt Trigger input in programming mode."       },       {         "number": "13",         "name": "RB7",         "type": "bidirectional",-        "description": "Bidirectional I/O pin with TTL/Schmitt Trigger input and interrupt-on-change; serves as the serial programming data (Schmitt Trigger input in programming mode)."+        "description": "PORTB bidirectional I/O pin with interrupt-on-change capability; it is the serial programming data pin with Schmitt Trigger input in programming mode."       },       {         "number": "14",         "name": "VDD",         "type": "power_in",-        "description": "Positive supply for logic and I/O pins."+        "description": "Positive supply for logic and I/O pins; 4.0 V to 6.0 V for XT, RC and LP oscillator configurations and 4.5 V to 5.5 V for HS (PIC16F84 standard range)."       },       {         "number": "15",         "name": "OSC2/CLKOUT",         "type": "output",-        "description": "Oscillator crystal output connecting to the crystal or resonator in crystal mode; in RC mode it outputs CLKOUT at 1/4 the OSC1 frequency, denoting the instruction cycle rate."+        "description": "Oscillator crystal output connecting to the crystal or resonator in crystal mode; in RC mode it outputs CLKOUT at 1/4 the OSC1 frequency."       },       {         "number": "16",@@ -149,13 +149,13 @@         "number": "17",         "name": "RA0",         "type": "bidirectional",-        "description": "PORTA bidirectional I/O pin with TTL input levels, direction set by TRISA<0>."+        "description": "PORTA bidirectional I/O pin with TTL input levels and full CMOS output drivers; direction is set by TRISA<0>."       },       {         "number": "18",         "name": "RA1",         "type": "bidirectional",-        "description": "PORTA bidirectional I/O pin with TTL input levels, direction set by TRISA<1>."+        "description": "PORTA bidirectional I/O pin with TTL input levels and full CMOS output drivers; direction is set by TRISA<1>."       }     ],     "provenance": {@@ -169,11 +169,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Pin numbers are taken from the SOIC column of Table 3-1 (page 9), which matches the SOIC pin diagram; The datasheet gives no per-pin electrical limits in the pinout table; descriptions reflect only the "+          "extractor flagged: The datasheet gives one pin table (Table 3-1) with identical DIP and SOIC pin numbers; the SOIC-18-3; KiCad types are mapped by me from the datasheet's buffer descriptions: PORTA/PORTB I/O pins are set ; VDD description quotes the PIC16F84 DC characteristics (D001/D001A, page 77), which give different r"         ],         "pages_sent": 128,-        "cost_usd": 0.5676,-        "at": "2026-11-12T17:40:20"+        "cost_usd": 0.5722,+        "at": "2026-11-17T19:09:29"       },       "datasheet": {         "url": "http://ww1.microchip.com/downloads/en/DeviceDoc/30430D.pdf",@@ -210,7 +210,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "05ad7d4945131c76ec7b9448dd9cbb5376b56adcd564c58d93e50ca7870fab1f",-        "checked": "2026-11-12",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -228,13 +228,13 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "677f677ab7c99fa7e45470cdb2a3ffaacde6e0790f9a8e2fa7dbc108aa9bbc54",-        "checked": "2026-11-12",+        "sha256": "97d31c20acc65ec9016e1292ccd87a8941f6bf91b55ba1f2e3862ea8866f7743",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],     "package_dims": {-      "package_code": "SO (K04-051, 18-Lead Plastic Small Outline, Wide 300 mil)",+      "package_code": "SO (18-Lead Plastic Small Outline, Wide, 300 mil)",       "source_page": 113,       "D": {         "nom_mm": 11.58,@@ -1015,10 +1015,11 @@     "viewers/symbol.html",     "viewers/footprint.html",     "pic16f84-04-so-hero.glb",-    "pic16f84-04-so-hero.overlay.json",-    "pic16f84-04-so-etched.glb"+    "pic16f84-04-so-hero.overlay.json"   ],   "visibility": {     "public": true-  }+  },+  "description": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-18-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file
pic16f84-04-so.lbr+14−3
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-18-300mil. Pinout cross-checked by two models against the datasheet</description> <packages> <package name="SOIC-18W_7.5x11.6mm_P1.27mm">   <description>SOIC-18W, 7.5 x 11.6 mm, 1.27 mm pitch. SOIC, 18 Pin</description>@@ -96,6 +96,7 @@ </packages> <symbols> <symbol name="PIC16F84-04">+  <description>Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-18-300mil. Pinout cross-checked by two models against the datasheet</description>   <wire x1="-12.7" y1="12.7" x2="12.7" y2="12.7" width="0.254" layer="94"/>   <wire x1="12.7" y1="12.7" x2="12.7" y2="-12.7" width="0.254" layer="94"/>   <wire x1="12.7" y1="-12.7" x2="-12.7" y2="-12.7" width="0.254" layer="94"/>@@ -124,7 +125,7 @@ </symbols> <devicesets> <deviceset name="PIC16F84-04" prefix="U">-  <description></description>+  <description>Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-18-300mil. Pinout cross-checked by two models against the datasheet</description>   <gates>     <gate name="G$1" symbol="PIC16F84-04" x="0" y="0"/>   </gates>@@ -150,7 +151,17 @@         <connect gate="G$1" pin="RB5" pad="11"/>         <connect gate="G$1" pin="RB4" pad="10"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="PIC16F84-04/SO" constant="no"/>+          <attribute name="MANUFACTURER" value="Microchip Tech" constant="no"/>+          <attribute name="DATASHEET" value="http://ww1.microchip.com/downloads/en/DeviceDoc/30430D.pdf" constant="no"/>+          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/pic16f84-04-so" constant="no"/>+          <attribute name="MOUSER_PN" value="579-PIC16F84-04/SO" constant="no"/>+          <attribute name="DIGIKEY_PN" value="PIC16F84-04/SO-ND" constant="no"/>+          <attribute name="LCSC_PN" value="C642675" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>