main
Ray
pic16f747-i-pt: renamed from pic16f747-i, the part it was built from (PIC16F747-I/PT); family listed
9477854
PIC16F747-I/PT
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-44(10x10)
PIC16F747-I from Microchip Tech, in a TQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RC7/RX/DT | bidirectional | Digital I/O (ST buffer) that serves as AUSART asynchronous receive (RX) or AUSART synchronous data (DT). |
| 2 | RD4/PSP4 | bidirectional | Digital I/O (ST/TTL buffer) that serves as Parallel Slave Port data bit 4. |
| 3 | RD5/PSP5 | bidirectional | Digital I/O (ST/TTL buffer) that serves as Parallel Slave Port data bit 5. |
| 4 | RD6/PSP6 | bidirectional | Digital I/O (ST/TTL buffer) that serves as Parallel Slave Port data bit 6. |
| 5 | RD7/PSP7 | bidirectional | Digital I/O (ST/TTL buffer) that serves as Parallel Slave Port data bit 7. |
| 6 | VSS | power_in | Ground reference for logic and I/O pins. |
| 7 | VDD | power_in | Positive supply for logic and I/O pins. |
| 8 | RB0/INT/AN12 | bidirectional | Digital I/O (TTL/ST buffer) that serves as external interrupt INT (Schmitt Trigger when configured as the interrupt) and analog input channel 12. |
| 9 | RB1/AN10 | bidirectional | Digital I/O (TTL buffer) that serves as analog input channel 10; PORTB inputs can be software-programmed with internal weak pull-up. |
| 10 | RB2/AN8 | bidirectional | Digital I/O (TTL buffer) that serves as analog input channel 8; PORTB inputs can be software-programmed with internal weak pull-up. |
| 11 | RB3/CCP2/AN9 | bidirectional | Digital I/O (TTL buffer) that serves as CCP2 capture input, compare output or PWM output (pin location set by CCPMX) and analog input channel 9. |
| 12 | NC | unconnected | Not internally connected; this pin should be left unconnected. |
| 13 | NC | unconnected | Not internally connected; this pin should be left unconnected. |
| 14 | RB4/AN11 | bidirectional | Digital I/O (TTL buffer) that serves as analog input channel 11; PORTB inputs can be software-programmed with internal weak pull-up. |
| 15 | RB5/AN13/CCP3 | bidirectional | Digital I/O (TTL buffer) that serves as analog input channel 13 and CCP3 capture input, compare output or PWM output. |
| 16 | RB6/PGC | bidirectional | Digital I/O (TTL/ST buffer) that serves as In-Circuit Debugger and ICSP programming clock (Schmitt Trigger when used in serial programming mode). |
| 17 | RB7/PGD | bidirectional | Digital I/O (TTL/ST buffer) that serves as In-Circuit Debugger and ICSP programming data (Schmitt Trigger when used in serial programming mode). |
| 18 | MCLR/VPP/RE3 | input | Active-low Master Clear Reset input when configured as MCLR, programming voltage input (VPP), or digital input-only pin RE3 when MCLR is not enabled in configuration. |
| 19 | RA0/AN0 | bidirectional | Digital I/O (TTL buffer) that serves as analog input 0. |
| 20 | RA1/AN1 | bidirectional | Digital I/O (TTL buffer) that serves as analog input 1. |
| 21 | RA2/AN2/VREF-/CVREF | bidirectional | Digital I/O (TTL buffer) that serves as analog input 2, A/D reference voltage input (low) and comparator voltage reference output. |
| 22 | RA3/AN3/VREF+ | bidirectional | Digital I/O (TTL buffer) that serves as analog input 3 and A/D reference voltage input (high). |
| 23 | RA4/T0CKI/C1OUT | bidirectional | Digital I/O (ST buffer, open-drain when configured as output) that serves as Timer0 external clock input (T0CKI) and Comparator 1 output (C1OUT). |
| 24 | RA5/AN4/LVDIN/SS/C2OUT | bidirectional | Digital I/O (TTL buffer) that serves as analog input 4, Low-Voltage Detect input (LVDIN), SPI slave select input (SS) and Comparator 2 output (C2OUT). |
| 25 | RE0/RD/AN5 | bidirectional | Digital I/O (ST/TTL buffer) that serves as Parallel Slave Port read control (RD) and analog input 5. |
| 26 | RE1/WR/AN6 | bidirectional | Digital I/O (ST/TTL buffer) that serves as Parallel Slave Port write control (WR) and analog input 6. |
| 27 | RE2/CS/AN7 | bidirectional | Digital I/O (ST/TTL buffer) that serves as Parallel Slave Port chip select control (CS) and analog input 7. |
| 28 | VDD | power_in | Positive supply for logic and I/O pins. |
| 29 | VSS | power_in | Ground reference for logic and I/O pins. |
| 30 | OSC1/CLKI/RA7 | bidirectional | Oscillator crystal or external clock input (OSC1/CLKI) with ST buffer in RC mode and CMOS otherwise, or bidirectional I/O RA7 when not used as oscillator input. |
| 31 | OSC2/CLKO/RA6 | bidirectional | Oscillator crystal output for crystal mode; in RC mode outputs CLKO at 1/4 the OSC1 frequency, otherwise bidirectional I/O RA6 (ST buffer). |
| 32 | RC0/T1OSO/T1CKI | bidirectional | Digital I/O (ST buffer) that serves as Timer1 oscillator output (T1OSO) and Timer1 external clock input (T1CKI). |
| 33 | NC | unconnected | Not internally connected; this pin should be left unconnected. |
| 34 | NC | unconnected | Not internally connected; this pin should be left unconnected. |
| 35 | RC1/T1OSI/CCP2 | bidirectional | Digital I/O (ST buffer) that serves as Timer1 oscillator input (T1OSI) and CCP2 capture input, compare output or PWM output (pin location set by CCPMX). |
| 36 | RC2/CCP1 | bidirectional | Digital I/O (ST buffer) that serves as CCP1 capture input, compare output or PWM output. |
| 37 | RC3/SCK/SCL | bidirectional | Digital I/O (ST buffer) that serves as synchronous serial clock input/output for SPI mode (SCK) or I2C mode (SCL). |
| 38 | RD0/PSP0 | bidirectional | Digital I/O (ST/TTL buffer) that serves as Parallel Slave Port data bit 0. |
| 39 | RD1/PSP1 | bidirectional | Digital I/O (ST/TTL buffer) that serves as Parallel Slave Port data bit 1. |
| 40 | RD2/PSP2 | bidirectional | Digital I/O (ST/TTL buffer) that serves as Parallel Slave Port data bit 2. |
| 41 | RD3/PSP3 | bidirectional | Digital I/O (ST/TTL buffer) that serves as Parallel Slave Port data bit 3. |
| 42 | RC4/SDI/SDA | bidirectional | Digital I/O (ST buffer) that serves as SPI data input (SDI) or I2C data I/O (SDA). |
| 43 | RC5/SDO | bidirectional | Digital I/O (ST buffer) that serves as SPI data output (SDO). |
| 44 | RC6/TX/CK | bidirectional | Digital I/O (ST buffer) that serves as AUSART asynchronous transmit (TX) or AUSART synchronous clock (CK). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-44(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 44 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| INTOSC accuracy, +25°C | -2 | 2 | % | Freq = 8, 4, 2, 1, 0.5 MHz, 250, 125 kHz; VDD = 4.5V-5.5V; +25°C; typ printed as ±1 | 215 | ||
| INTOSC accuracy, -10°C to +85°C | -5 | 5 | % | Freq = 8, 4, 2, 1, 0.5 MHz, 250, 125 kHz; VDD = 4.5V-5.5V; -10°C to +85°C | 215 | ||
| INTOSC accuracy, -40°C to +85°C | -10 | 10 | % | Freq = 8, 4, 2, 1, 0.5 MHz, 250, 125 kHz; VDD = 4.5V-5.5V; -40°C to +85°C | 215 | ||
| INTRC accuracy @ 31 kHz | 26.562 | 35.938 | kHz | -40°C to +85°C; VDD = 4.5V-5.5V | 215 | ||
| OSCTUNE frequency tuning range | -12.5 | 12.5 | % | OSCTUNE register tuning range | 36 | ||
| Operating frequency | 20 | MHz | Printed as DC, 20 MHz for PIC16F747 | 5 | |||
| RC oscillator external resistor REXT | REXT | 3 | 100 | kΩ | RC / RCIO oscillator modes | 35 | |
| RC oscillator external capacitor CEXT | CEXT | 20 | pF | RC / RCIO oscillator modes; printed as CEXT > 20 pF | 35 | ||
| Power-on Reset VDD rise detection range | 1.2 | 1.7 | V | POR pulse generated when VDD rise is detected | 173 | ||
| Maximum device frequency, A/D TAD = 2 TOSC | 1.25 | MHz | A/D clock ADCS2:ADCS0 = 000; standard devices (F) | 157 | |||
| Maximum device frequency, A/D TAD = 4 TOSC | 2.5 | MHz | A/D clock ADCS2:ADCS0 = 100; standard devices (F) | 157 | |||
| Maximum device frequency, A/D TAD = 8 TOSC | 5 | MHz | A/D clock ADCS2:ADCS0 = 001; standard devices (F) | 157 | |||
| Maximum device frequency, A/D TAD = 16 TOSC | 10 | MHz | A/D clock ADCS2:ADCS0 = 101; standard devices (F) | 157 | |||
| Maximum device frequency, A/D TAD = 32 TOSC | 20 | MHz | A/D clock ADCS2:ADCS0 = 010; standard devices (F) | 157 | |||
| Maximum device frequency, A/D TAD = 64 TOSC | 20 | MHz | A/D clock ADCS2:ADCS0 = 110; standard devices (F) | 157 | |||
| Oscillator period TOSC | TOSC | 50 | ns | Minimum oscillator period | 44 | ||
| INTRC/Timer1 input clock period TINP | TINP | 32 | µs | Typical, 32 kHz clock | 44 | ||
| CPU start-up delay TEPU | TEPU | 5 | 10 | µs | Internal delay timer after POR, BOR or wake-up from Sleep | 45 | |
| A/D minimum TAD time | TAD | 1.6 | µs | Minimum TAD for correct A/D conversions | 157 | ||
| A/D conversion time | 12 | TAD | Minimum per 10-bit conversion | 157 | |||
| A/D delay before next acquisition | 2 | TAD | Minimum wait before next acquisition starts | 155 | |||
| Maximum recommended analog source impedance | RS | 2.5 | kΩ | A/D analog input source impedance | 156 |
CAD (KiCad official)
- Symbol:
PIC16F747-I - Footprint:
Package_QFP:TQFP-44_10x10mm_P0.8mm - 3D model: TQFP-44(10x10) (KiCad packages3D, STEP)
- 3D model files:
pic16f747-i-etched.step/pic16f747-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f747-i.step/pic16f747-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (280 pp, sha256
924c77a75d268d68, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC16F747-I/PT. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC16F747-I/P
# PIC16F747-I/PT
**Microchip Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-44(10x10)
PIC16F747-I from Microchip Tech, in a TQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RC7/RX/DT | bidirectional | Digital I/O (ST buffer) that serves as AUSART asynchronous receive (RX) or AUSART synchronous data (DT). |
| 2 | RD4/PSP4 | bidirectional | Digital I/O (ST/TTL buffer) that serves as Parallel Slave Port data bit 4. |
| 3 | RD5/PSP5 | bidirectional | Digital I/O (ST/TTL buffer) that serves as Parallel Slave Port data bit 5. |
| 4 | RD6/PSP6 | bidirectional | Digital I/O (ST/TTL buffer) that serves as Parallel Slave Port data bit 6. |
| 5 | RD7/PSP7 | bidirectional | Digital I/O (ST/TTL buffer) that serves as Parallel Slave Port data bit 7. |
| 6 | VSS | power_in | Ground reference for logic and I/O pins. |
| 7 | VDD | power_in | Positive supply for logic and I/O pins. |
| 8 | RB0/INT/AN12 | bidirectional | Digital I/O (TTL/ST buffer) that serves as external interrupt INT (Schmitt Trigger when configured as the interrupt) and analog input channel 12. |
| 9 | RB1/AN10 | bidirectional | Digital I/O (TTL buffer) that serves as analog input channel 10; PORTB inputs can be software-programmed with internal weak pull-up. |
| 10 | RB2/AN8 | bidirectional | Digital I/O (TTL buffer) that serves as analog input channel 8; PORTB inputs can be software-programmed with internal weak pull-up. |
| 11 | RB3/CCP2/AN9 | bidirectional | Digital I/O (TTL buffer) that serves as CCP2 capture input, compare output or PWM output (pin location set by CCPMX) and analog input channel 9. |
| 12 | NC | unconnected | Not internally connected; this pin should be left unconnected. |
| 13 | NC | unconnected | Not internally connected; this pin should be left unconnected. |
| 14 | RB4/AN11 | bidirectional | Digital I/O (TTL buffer) that serves as analog input channel 11; PORTB inputs can be software-programmed with internal weak pull-up. |
| 15 | RB5/AN13/CCP3 | bidirectional | Digital I/O (TTL buffer) that serves as analog input channel 13 and CCP3 capture input, compare output or PWM output. |
| 16 | RB6/PGC | bidirectional | Digital I/O (TTL/ST buffer) that serves as In-Circuit Debugger and ICSP programming clock (Schmitt Trigger when used in serial programming mode). |
| 17 | RB7/PGD | bidirectional | Digital I/O (TTL/ST buffer) that serves as In-Circuit Debugger and ICSP programming data (Schmitt Trigger when used in serial programming mode). |
| 18 | MCLR/VPP/RE3 | input | Active-low Master Clear Reset input when configured as MCLR, programming voltage input (VPP), or digital input-only pin RE3 when MCLR is not enabled in configuration. |
| 19 | RA0/AN0 | bidirectional | Digital I/O (TTL buffer) that serves as analog input 0. |
| 20 | RA1/AN1 | bidirectional | Digital I/O (TTL buffer) that serves as analog input 1. |
| 21 | RA2/AN2/VREF-/CVREF | bidirectional | Digital I/O (TTL buffer) that serves as analog input 2, A/D reference voltage input (low) and comparator voltage reference output. |
| 22 | RA3/AN3/VREF+ | bidirectional | Digital I/O (TTL buffer) that serves as analog input 3 and A/D reference voltage input (high). |
| 23 | RA4/T0CKI/C1OUT | bidirectional | Digital I/O (ST buffer, open-drain when configured as output) that serves as Timer0 external clock input (T0CKI) and Comparator 1 output (C1OUT). |
| 24 | RA5/AN4/LVDIN/SS/C2OUT | bidirectional | Digital I/O (TTL buffer) that serves as analog input 4, Low-Voltage Detect input (LVDIN), SPI slave select input (SS) and Comparator 2 output (C2OUT). |
| 25 | RE0/RD/AN5 | bidirectional | Digital I/O (ST/TTL buffer) that serves as Parallel Slave Port read control (RD) and analog input 5. |
| 26 | RE1/WR/AN6 | bidirectional | Digital I/O (ST/TTL buffer) that serves as Parallel Slave Port write control (WR) and analog input 6. |
| 27 | RE2/CS/AN7 | bidirectional | Digital I/O (ST/TTL buffer) that serves as Parallel Slave Port chip select control (CS) and analog input 7. |
| 28 | VDD | power_in | Positive supply for logic and I/O pins. |
| 29 | VSS | power_in | Ground reference for logic and I/O pins. |
| 30 | OSC1/CLKI/RA7 | bidirectional | Oscillator crystal or external clock input (OSC1/CLKI) with ST buffer in RC mode and CMOS otherwise, or bidirectional I/O RA7 when not used as oscillator input. |
| 31 | OSC2/CLKO/RA6 | bidirectional | Oscillator crystal output for crystal mode; in RC mode outputs CLKO at 1/4 the OSC1 frequency, otherwise bidirectional I/O RA6 (ST buffer). |
| 32 | RC0/T1OSO/T1CKI | bidirectional | Digital I/O (ST buffer) that serves as Timer1 oscillator output (T1OSO) and Timer1 external clock input (T1CKI). |
| 33 | NC | unconnected | Not internally connected; this pin should be left unconnected. |
| 34 | NC | unconnected | Not internally connected; this pin should be left unconnected. |
| 35 | RC1/T1OSI/CCP2 | bidirectional | Digital I/O (ST buffer) that serves as Timer1 oscillator input (T1OSI) and CCP2 capture input, compare output or PWM output (pin location set by CCPMX). |
| 36 | RC2/CCP1 | bidirectional | Digital I/O (ST buffer) that serves as CCP1 capture input, compare output or PWM output. |
| 37 | RC3/SCK/SCL | bidirectional | Digital I/O (ST buffer) that serves as synchronous serial clock input/output for SPI mode (SCK) or I2C mode (SCL). |
| 38 | RD0/PSP0 | bidirectional | Digital I/O (ST/TTL buffer) that serves as Parallel Slave Port data bit 0. |
| 39 | RD1/PSP1 | bidirectional | Digital I/O (ST/TTL buffer) that serves as Parallel Slave Port data bit 1. |
| 40 | RD2/PSP2 | bidirectional | Digital I/O (ST/TTL buffer) that serves as Parallel Slave Port data bit 2. |
| 41 | RD3/PSP3 | bidirectional | Digital I/O (ST/TTL buffer) that serves as Parallel Slave Port data bit 3. |
| 42 | RC4/SDI/SDA | bidirectional | Digital I/O (ST buffer) that serves as SPI data input (SDI) or I2C data I/O (SDA). |
| 43 | RC5/SDO | bidirectional | Digital I/O (ST buffer) that serves as SPI data output (SDO). |
| 44 | RC6/TX/CK | bidirectional | Digital I/O (ST buffer) that serves as AUSART asynchronous transmit (TX) or AUSART synchronous clock (CK). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-44(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 44 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| INTOSC accuracy, +25°C | | -2 | | 2 | % | Freq = 8, 4, 2, 1, 0.5 MHz, 250, 125 kHz; VDD = 4.5V-5.5V; +25°C; typ printed as ±1 | 215 |
| INTOSC accuracy, -10°C to +85°C | | -5 | | 5 | % | Freq = 8, 4, 2, 1, 0.5 MHz, 250, 125 kHz; VDD = 4.5V-5.5V; -10°C to +85°C | 215 |
| INTOSC accuracy, -40°C to +85°C | | -10 | | 10 | % | Freq = 8, 4, 2, 1, 0.5 MHz, 250, 125 kHz; VDD = 4.5V-5.5V; -40°C to +85°C | 215 |
| INTRC accuracy @ 31 kHz | | 26.562 | | 35.938 | kHz | -40°C to +85°C; VDD = 4.5V-5.5V | 215 |
| OSCTUNE frequency tuning range | | -12.5 | | 12.5 | % | OSCTUNE register tuning range | 36 |
| Operating frequency | | | | 20 | MHz | Printed as DC, 20 MHz for PIC16F747 | 5 |
| RC oscillator external resistor REXT | REXT | 3 | | 100 | kΩ | RC / RCIO oscillator modes | 35 |
| RC oscillator external capacitor CEXT | CEXT | 20 | | | pF | RC / RCIO oscillator modes; printed as CEXT > 20 pF | 35 |
| Power-on Reset VDD rise detection range | | 1.2 | | 1.7 | V | POR pulse generated when VDD rise is detected | 173 |
| Maximum device frequency, A/D TAD = 2 TOSC | | | | 1.25 | MHz | A/D clock ADCS2:ADCS0 = 000; standard devices (F) | 157 |
| Maximum device frequency, A/D TAD = 4 TOSC | | | | 2.5 | MHz | A/D clock ADCS2:ADCS0 = 100; standard devices (F) | 157 |
| Maximum device frequency, A/D TAD = 8 TOSC | | | | 5 | MHz | A/D clock ADCS2:ADCS0 = 001; standard devices (F) | 157 |
| Maximum device frequency, A/D TAD = 16 TOSC | | | | 10 | MHz | A/D clock ADCS2:ADCS0 = 101; standard devices (F) | 157 |
| Maximum device frequency, A/D TAD = 32 TOSC | | | | 20 | MHz | A/D clock ADCS2:ADCS0 = 010; standard devices (F) | 157 |
| Maximum device frequency, A/D TAD = 64 TOSC | | | | 20 | MHz | A/D clock ADCS2:ADCS0 = 110; standard devices (F) | 157 |
| Oscillator period TOSC | TOSC | 50 | | | ns | Minimum oscillator period | 44 |
| INTRC/Timer1 input clock period TINP | TINP | | 32 | | µs | Typical, 32 kHz clock | 44 |
| CPU start-up delay TEPU | TEPU | 5 | | 10 | µs | Internal delay timer after POR, BOR or wake-up from Sleep | 45 |
| A/D minimum TAD time | TAD | 1.6 | | | µs | Minimum TAD for correct A/D conversions | 157 |
| A/D conversion time | | 12 | | | TAD | Minimum per 10-bit conversion | 157 |
| A/D delay before next acquisition | | 2 | | | TAD | Minimum wait before next acquisition starts | 155 |
| Maximum recommended analog source impedance | RS | | | 2.5 | kΩ | A/D analog input source impedance | 156 |
## CAD (KiCad official)
- Symbol: `PIC16F747-I`
- Footprint: `Package_QFP:TQFP-44_10x10mm_P0.8mm`
- 3D model: TQFP-44(10x10) (KiCad packages3D, STEP)
- 3D model files: `pic16f747-i-etched.step` / `pic16f747-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic16f747-i.step` / `pic16f747-i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/30498D.pdf) (280 pp, sha256 `924c77a75d268d68`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic16f747-i-datasheet.pdf)
## Other parts in this family
This page is **PIC16F747-I/PT**. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC16F747-I/P