main
Ray
pic16f737-i-ss: renamed from pic16f737-i, the part it was built from (PIC16F737-I/SS); family listed
d0fa7da
PIC16F737-I/SS
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28
PIC16F737-I from Microchip Tech, in a SSOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR/VPP/RE3 | input | Active-low Master Clear (Reset) input, programming voltage input, or digital input-only pin RE3 when MCLRE is cleared; ST buffer. |
| 2 | RA0/AN0 | bidirectional | PORTA digital I/O or analog input 0; TTL buffer. |
| 3 | RA1/AN1 | bidirectional | PORTA digital I/O or analog input 1; TTL buffer. |
| 4 | RA2/AN2/VREF-/CVREF | bidirectional | PORTA digital I/O, analog input 2, A/D reference voltage input (low) or comparator voltage reference output; TTL buffer. |
| 5 | RA3/AN3/VREF+ | bidirectional | PORTA digital I/O, analog input 3 or A/D reference voltage input (high); TTL buffer. |
| 6 | RA4/T0CKI/C1OUT | bidirectional | PORTA digital I/O (open-drain when configured as output), Timer0 external clock input or Comparator 1 output; ST buffer. |
| 7 | RA5/AN4/LVDIN/SS/C2OUT | bidirectional | PORTA digital I/O, analog input 4, Low-Voltage Detect input, SPI slave select input or Comparator 2 output; TTL buffer. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | OSC1/CLKI/RA7 | input | Oscillator crystal or external clock source input (ST buffer in RC mode, otherwise CMOS), or digital I/O RA7. |
| 10 | OSC2/CLKO/RA6 | bidirectional | Oscillator crystal output, or in RC mode CLKO at 1/4 the OSC1 frequency denoting instruction cycle rate, or digital I/O RA6. |
| 11 | RC0/T1OSO/T1CKI | bidirectional | PORTC digital I/O, Timer1 oscillator output or Timer1 external clock input; ST buffer. |
| 12 | RC1/T1OSI/CCP2 | bidirectional | PORTC digital I/O, Timer1 oscillator input or Capture2 input/Compare2 output/PWM2 output (CCP2 location set by CCPMX bit); ST buffer. |
| 13 | RC2/CCP1 | bidirectional | PORTC digital I/O or Capture1 input/Compare1 output/PWM1 output; ST buffer. |
| 14 | RC3/SCK/SCL | bidirectional | PORTC digital I/O or synchronous serial clock input/output for SPI (SCK) and I2C (SCL) modes; ST buffer. |
| 15 | RC4/SDI/SDA | bidirectional | PORTC digital I/O, SPI data in or I2C data I/O; ST buffer. |
| 16 | RC5/SDO | bidirectional | PORTC digital I/O or SPI data out; ST buffer. |
| 17 | RC6/TX/CK | bidirectional | PORTC digital I/O, AUSART asynchronous transmit or AUSART synchronous clock; ST buffer. |
| 18 | RC7/RX/DT | bidirectional | PORTC digital I/O, AUSART asynchronous receive or AUSART synchronous data; ST buffer. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for logic and I/O pins. |
| 21 | RB0/INT/AN12 | bidirectional | PORTB digital I/O (software-programmable weak pull-up), external interrupt or analog input channel 12; TTL/ST buffer. |
| 22 | RB1/AN10 | bidirectional | PORTB digital I/O (software-programmable weak pull-up) or analog input channel 10; TTL buffer. |
| 23 | RB2/AN8 | bidirectional | PORTB digital I/O (software-programmable weak pull-up) or analog input channel 8; TTL buffer. |
| 24 | RB3/CCP2/AN9 | bidirectional | PORTB digital I/O, CCP2 capture input/compare output/PWM output (location set by CCPMX bit) or analog input channel 9; TTL buffer. |
| 25 | RB4/AN11 | bidirectional | PORTB digital I/O (software-programmable weak pull-up) or analog input channel 11; TTL buffer. |
| 26 | RB5/AN13/CCP3 | bidirectional | PORTB digital I/O, analog input channel 13 or CCP3 capture input/compare output/PWM output; TTL buffer. |
| 27 | RB6/PGC | bidirectional | PORTB digital I/O or In-Circuit Debugger and ICSP programming clock; TTL/ST buffer (ST in Serial Programming mode). |
| 28 | RB7/PGD | bidirectional | PORTB digital I/O or In-Circuit Debugger and ICSP programming data; TTL/ST buffer (ST in Serial Programming mode). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (all configurations) | VDD | 4 | 5.5 | V | All configurations | 207 | |
| Supply Voltage (BOR enabled) | VDD | 5.5 | V | BOR enabled (Note 6); min is VBOR | 207 | ||
| RAM Data Retention Voltage | VDR | 1.5 | V | Note 1 | 207 | ||
| VDD Rise Rate for POR | SVDD | 0.05 | V/ms | See section on Power-on Reset for details | 207 | ||
| Brown-out Reset Voltage, BORV1:BORV0 = 01 | VBOR | 4.16 | 4.5 | V | PIC16F7X7 Industrial | 207 | |
| Brown-out Reset Voltage, BORV1:BORV0 = 00 | VBOR | 4.45 | 4.83 | V | PIC16F7X7 Industrial | 207 | |
| Power-Down Current | IPD | 0.6 | 1 | µA | All devices, VDD = 5.0V, -40°C | 208 | |
| Power-Down Current | IPD | 1.2 | 5 | µA | All devices, VDD = 5.0V, +85°C | 208 | |
| Supply Current, FOSC = 32 kHz LP | IDD | 32 | 40 | µA | All devices, VDD = 5.0V, -40°C | 209 | |
| Supply Current, FOSC = 32 kHz LP | IDD | 26 | 35 | µA | All devices, VDD = 5.0V, +25°C | 209 | |
| Supply Current, FOSC = 1 MHz RC | IDD | 310 | 380 | µA | All devices, VDD = 5.0V, -40°C | 209 | |
| Supply Current, FOSC = 1 MHz RC | IDD | 290 | 360 | µA | All devices, VDD = 5.0V, +25°C | 209 | |
| Supply Current, FOSC = 1 MHz RC | IDD | 280 | 360 | µA | All devices, VDD = 5.0V, +85°C | 209 | |
| Supply Current, FOSC = 4 MHz RC | IDD | 900 | 1060 | µA | All devices, VDD = 5.0V, -40°C | 210 | |
| Supply Current, FOSC = 4 MHz RC | IDD | 890 | 1050 | µA | All devices, VDD = 5.0V, +25°C | 210 | |
| Supply Current, FOSC = 20 MHz HS | IDD | 1.8 | 2.3 | mA | All devices, VDD = 4.0V, -40°C | 210 | |
| Supply Current, FOSC = 20 MHz HS | IDD | 1.6 | 2.2 | mA | All devices, VDD = 4.0V, +25°C | 210 | |
| Supply Current, FOSC = 20 MHz HS | IDD | 1.3 | 2.2 | mA | All devices, VDD = 4.0V, +85°C | 210 | |
| Supply Current, FOSC = 20 MHz HS | IDD | 3 | 4.2 | mA | All devices, VDD = 5.0V, -40°C | 210 | |
| Supply Current, FOSC = 20 MHz HS | IDD | 2.5 | 4 | mA | All devices, VDD = 5.0V, +25°C | 210 | |
| Supply Current, 31.25 kHz RC_RUN | IDD | 32 | 40 | µA | All devices, VDD = 5.0V, -40°C | 211 | |
| Supply Current, 31.25 kHz RC_RUN | IDD | 29 | 35 | µA | All devices, VDD = 5.0V, +25°C | 211 | |
| Supply Current, 1 MHz RC_RUN | IDD | 560 | 690 | µA | All devices, VDD = 5.0V, -40°C | 211 | |
| Supply Current, 1 MHz RC_RUN | IDD | 500 | 650 | µA | All devices, VDD = 5.0V, +25°C | 211 | |
| Supply Current, 4 MHz RC_RUN | IDD | 1.2 | 1.5 | mA | All devices, VDD = 5.0V, -40°C | 211 | |
| Supply Current, 4 MHz RC_RUN | IDD | 1.1 | 1.4 | mA | All devices, VDD = 5.0V, +25°C | 211 | |
| Supply Current, 8 MHz RC_RUN | IDD | 1.8 | 3 | mA | All devices, VDD = 5.0V, -40°C | 212 | |
| Supply Current, 8 MHz RC_RUN | IDD | 1.7 | 2.8 | mA | All devices, VDD = 5.0V, +25°C | 212 | |
| Supply Current, 32 kHz SEC_RUN | IDD | 20 | 72 | µA | All devices, VDD = 5.0V, -10°C | 212 | |
| Supply Current, 32 kHz SEC_RUN | IDD | 20 | 65 | µA | All devices, VDD = 5.0V, +25°C | 212 | |
| Supply Current, 32 kHz SEC_RUN | IDD | 25 | 59 | µA | All devices, VDD = 5.0V, +70°C | 212 | |
| Watchdog Timer Differential Current | IWDT | 3 | 10 | µA | VDD = 5.0V, -40°C | 213 | |
| Watchdog Timer Differential Current | IWDT | 3.3 | 10 | µA | VDD = 5.0V, +25°C | 213 | |
| Watchdog Timer Differential Current | IWDT | 3.9 | 13 | µA | VDD = 5.0V, +85°C | 213 | |
| Low-Voltage Detect Differential Current | ILVD | 21 | 45 | µA | -40°C to +85°C, VDD = 5.0V | 213 | |
| Ambient temperature under bias | -40 | 125 | °C | 205 | |||
| Storage temperature | -65 | 150 | °C | 205 | |||
| Voltage on any pin with respect to VSS (except VDD, MCLR and RA4) | -0.3 | V | max is VDD + 0.3V | 205 | |||
| Voltage on VDD with respect to VSS | VDD | -0.3 | 6.5 | V | 205 | ||
| Voltage on MCLR with respect to VSS | 0 | 13.5 | V | Note 2 | 205 | ||
| Voltage on RA4 with respect to VSS | 0 | 12 | V | 205 | |||
| Total power dissipation | 1 | W | Note 1 | 205 | |||
| Input clamp current | IIK | 20 | mA | VI < 0 or VI > VDD | 205 | ||
| Output clamp current | IOK | 20 | mA | VO < 0 or VO > VDD | 205 | ||
| Operating temperature (industrial) | TA | -40 | 85 | °C | Industrial | 207 |
CAD (KiCad official)
- Symbol:
PIC16F737-I - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28 (KiCad packages3D, STEP)
- 3D model files:
pic16f737-i-etched.step/pic16f737-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f737-i.step/pic16f737-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (280 pp, sha256
bb9c16fb963b6aa4, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC16F737-I/SS. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC16F737-I/SP
# PIC16F737-I/SS
**Microchip Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28
PIC16F737-I from Microchip Tech, in a SSOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR/VPP/RE3 | input | Active-low Master Clear (Reset) input, programming voltage input, or digital input-only pin RE3 when MCLRE is cleared; ST buffer. |
| 2 | RA0/AN0 | bidirectional | PORTA digital I/O or analog input 0; TTL buffer. |
| 3 | RA1/AN1 | bidirectional | PORTA digital I/O or analog input 1; TTL buffer. |
| 4 | RA2/AN2/VREF-/CVREF | bidirectional | PORTA digital I/O, analog input 2, A/D reference voltage input (low) or comparator voltage reference output; TTL buffer. |
| 5 | RA3/AN3/VREF+ | bidirectional | PORTA digital I/O, analog input 3 or A/D reference voltage input (high); TTL buffer. |
| 6 | RA4/T0CKI/C1OUT | bidirectional | PORTA digital I/O (open-drain when configured as output), Timer0 external clock input or Comparator 1 output; ST buffer. |
| 7 | RA5/AN4/LVDIN/SS/C2OUT | bidirectional | PORTA digital I/O, analog input 4, Low-Voltage Detect input, SPI slave select input or Comparator 2 output; TTL buffer. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | OSC1/CLKI/RA7 | input | Oscillator crystal or external clock source input (ST buffer in RC mode, otherwise CMOS), or digital I/O RA7. |
| 10 | OSC2/CLKO/RA6 | bidirectional | Oscillator crystal output, or in RC mode CLKO at 1/4 the OSC1 frequency denoting instruction cycle rate, or digital I/O RA6. |
| 11 | RC0/T1OSO/T1CKI | bidirectional | PORTC digital I/O, Timer1 oscillator output or Timer1 external clock input; ST buffer. |
| 12 | RC1/T1OSI/CCP2 | bidirectional | PORTC digital I/O, Timer1 oscillator input or Capture2 input/Compare2 output/PWM2 output (CCP2 location set by CCPMX bit); ST buffer. |
| 13 | RC2/CCP1 | bidirectional | PORTC digital I/O or Capture1 input/Compare1 output/PWM1 output; ST buffer. |
| 14 | RC3/SCK/SCL | bidirectional | PORTC digital I/O or synchronous serial clock input/output for SPI (SCK) and I2C (SCL) modes; ST buffer. |
| 15 | RC4/SDI/SDA | bidirectional | PORTC digital I/O, SPI data in or I2C data I/O; ST buffer. |
| 16 | RC5/SDO | bidirectional | PORTC digital I/O or SPI data out; ST buffer. |
| 17 | RC6/TX/CK | bidirectional | PORTC digital I/O, AUSART asynchronous transmit or AUSART synchronous clock; ST buffer. |
| 18 | RC7/RX/DT | bidirectional | PORTC digital I/O, AUSART asynchronous receive or AUSART synchronous data; ST buffer. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for logic and I/O pins. |
| 21 | RB0/INT/AN12 | bidirectional | PORTB digital I/O (software-programmable weak pull-up), external interrupt or analog input channel 12; TTL/ST buffer. |
| 22 | RB1/AN10 | bidirectional | PORTB digital I/O (software-programmable weak pull-up) or analog input channel 10; TTL buffer. |
| 23 | RB2/AN8 | bidirectional | PORTB digital I/O (software-programmable weak pull-up) or analog input channel 8; TTL buffer. |
| 24 | RB3/CCP2/AN9 | bidirectional | PORTB digital I/O, CCP2 capture input/compare output/PWM output (location set by CCPMX bit) or analog input channel 9; TTL buffer. |
| 25 | RB4/AN11 | bidirectional | PORTB digital I/O (software-programmable weak pull-up) or analog input channel 11; TTL buffer. |
| 26 | RB5/AN13/CCP3 | bidirectional | PORTB digital I/O, analog input channel 13 or CCP3 capture input/compare output/PWM output; TTL buffer. |
| 27 | RB6/PGC | bidirectional | PORTB digital I/O or In-Circuit Debugger and ICSP programming clock; TTL/ST buffer (ST in Serial Programming mode). |
| 28 | RB7/PGD | bidirectional | PORTB digital I/O or In-Circuit Debugger and ICSP programming data; TTL/ST buffer (ST in Serial Programming mode). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (all configurations) | VDD | 4 | | 5.5 | V | All configurations | 207 |
| Supply Voltage (BOR enabled) | VDD | | | 5.5 | V | BOR enabled (Note 6); min is VBOR | 207 |
| RAM Data Retention Voltage | VDR | | 1.5 | | V | Note 1 | 207 |
| VDD Rise Rate for POR | SVDD | 0.05 | | | V/ms | See section on Power-on Reset for details | 207 |
| Brown-out Reset Voltage, BORV1:BORV0 = 01 | VBOR | 4.16 | | 4.5 | V | PIC16F7X7 Industrial | 207 |
| Brown-out Reset Voltage, BORV1:BORV0 = 00 | VBOR | 4.45 | | 4.83 | V | PIC16F7X7 Industrial | 207 |
| Power-Down Current | IPD | | 0.6 | 1 | µA | All devices, VDD = 5.0V, -40°C | 208 |
| Power-Down Current | IPD | | 1.2 | 5 | µA | All devices, VDD = 5.0V, +85°C | 208 |
| Supply Current, FOSC = 32 kHz LP | IDD | | 32 | 40 | µA | All devices, VDD = 5.0V, -40°C | 209 |
| Supply Current, FOSC = 32 kHz LP | IDD | | 26 | 35 | µA | All devices, VDD = 5.0V, +25°C | 209 |
| Supply Current, FOSC = 1 MHz RC | IDD | | 310 | 380 | µA | All devices, VDD = 5.0V, -40°C | 209 |
| Supply Current, FOSC = 1 MHz RC | IDD | | 290 | 360 | µA | All devices, VDD = 5.0V, +25°C | 209 |
| Supply Current, FOSC = 1 MHz RC | IDD | | 280 | 360 | µA | All devices, VDD = 5.0V, +85°C | 209 |
| Supply Current, FOSC = 4 MHz RC | IDD | | 900 | 1060 | µA | All devices, VDD = 5.0V, -40°C | 210 |
| Supply Current, FOSC = 4 MHz RC | IDD | | 890 | 1050 | µA | All devices, VDD = 5.0V, +25°C | 210 |
| Supply Current, FOSC = 20 MHz HS | IDD | | 1.8 | 2.3 | mA | All devices, VDD = 4.0V, -40°C | 210 |
| Supply Current, FOSC = 20 MHz HS | IDD | | 1.6 | 2.2 | mA | All devices, VDD = 4.0V, +25°C | 210 |
| Supply Current, FOSC = 20 MHz HS | IDD | | 1.3 | 2.2 | mA | All devices, VDD = 4.0V, +85°C | 210 |
| Supply Current, FOSC = 20 MHz HS | IDD | | 3 | 4.2 | mA | All devices, VDD = 5.0V, -40°C | 210 |
| Supply Current, FOSC = 20 MHz HS | IDD | | 2.5 | 4 | mA | All devices, VDD = 5.0V, +25°C | 210 |
| Supply Current, 31.25 kHz RC_RUN | IDD | | 32 | 40 | µA | All devices, VDD = 5.0V, -40°C | 211 |
| Supply Current, 31.25 kHz RC_RUN | IDD | | 29 | 35 | µA | All devices, VDD = 5.0V, +25°C | 211 |
| Supply Current, 1 MHz RC_RUN | IDD | | 560 | 690 | µA | All devices, VDD = 5.0V, -40°C | 211 |
| Supply Current, 1 MHz RC_RUN | IDD | | 500 | 650 | µA | All devices, VDD = 5.0V, +25°C | 211 |
| Supply Current, 4 MHz RC_RUN | IDD | | 1.2 | 1.5 | mA | All devices, VDD = 5.0V, -40°C | 211 |
| Supply Current, 4 MHz RC_RUN | IDD | | 1.1 | 1.4 | mA | All devices, VDD = 5.0V, +25°C | 211 |
| Supply Current, 8 MHz RC_RUN | IDD | | 1.8 | 3 | mA | All devices, VDD = 5.0V, -40°C | 212 |
| Supply Current, 8 MHz RC_RUN | IDD | | 1.7 | 2.8 | mA | All devices, VDD = 5.0V, +25°C | 212 |
| Supply Current, 32 kHz SEC_RUN | IDD | | 20 | 72 | µA | All devices, VDD = 5.0V, -10°C | 212 |
| Supply Current, 32 kHz SEC_RUN | IDD | | 20 | 65 | µA | All devices, VDD = 5.0V, +25°C | 212 |
| Supply Current, 32 kHz SEC_RUN | IDD | | 25 | 59 | µA | All devices, VDD = 5.0V, +70°C | 212 |
| Watchdog Timer Differential Current | IWDT | | 3 | 10 | µA | VDD = 5.0V, -40°C | 213 |
| Watchdog Timer Differential Current | IWDT | | 3.3 | 10 | µA | VDD = 5.0V, +25°C | 213 |
| Watchdog Timer Differential Current | IWDT | | 3.9 | 13 | µA | VDD = 5.0V, +85°C | 213 |
| Low-Voltage Detect Differential Current | ILVD | | 21 | 45 | µA | -40°C to +85°C, VDD = 5.0V | 213 |
| Ambient temperature under bias | | -40 | | 125 | °C | | 205 |
| Storage temperature | | -65 | | 150 | °C | | 205 |
| Voltage on any pin with respect to VSS (except VDD, MCLR and RA4) | | -0.3 | | | V | max is VDD + 0.3V | 205 |
| Voltage on VDD with respect to VSS | VDD | -0.3 | | 6.5 | V | | 205 |
| Voltage on MCLR with respect to VSS | | 0 | | 13.5 | V | Note 2 | 205 |
| Voltage on RA4 with respect to VSS | | 0 | | 12 | V | | 205 |
| Total power dissipation | | | | 1 | W | Note 1 | 205 |
| Input clamp current | IIK | | | 20 | mA | VI < 0 or VI > VDD | 205 |
| Output clamp current | IOK | | | 20 | mA | VO < 0 or VO > VDD | 205 |
| Operating temperature (industrial) | TA | -40 | | 85 | °C | Industrial | 207 |
## CAD (KiCad official)
- Symbol: `PIC16F737-I`
- Footprint: `Package_SO:SSOP-28_5.3x10.2mm_P0.65mm`
- 3D model: SSOP-28 (KiCad packages3D, STEP)
- 3D model files: `pic16f737-i-etched.step` / `pic16f737-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic16f737-i.step` / `pic16f737-i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/pic16f737-i-datasheet.pdf) (280 pp, sha256 `bb9c16fb963b6aa4`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic16f737-i-datasheet.pdf)
## Other parts in this family
This page is **PIC16F737-I/SS**. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC16F737-I/SP