main
Ray
Publish 0.1.0
b323325
PIC16F73-E
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil
PIC16F73-E from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR/VPP | input | Master Clear (Reset) input, an active low RESET to the device, and programming voltage input VPP. |
| 2 | RA0/AN0 | bidirectional | Digital I/O (TTL) with analog input 0. |
| 3 | RA1/AN1 | bidirectional | Digital I/O (TTL) with analog input 1. |
| 4 | RA2/AN2 | bidirectional | Digital I/O (TTL) with analog input 2. |
| 5 | RA3/AN3/VREF | bidirectional | Digital I/O (TTL) with analog input 3 and A/D reference voltage input VREF. |
| 6 | RA4/T0CKI | bidirectional | Digital I/O (Schmitt Trigger input), open drain when configured as output, and Timer0 external clock input. |
| 7 | RA5/SS/AN4 | bidirectional | Digital I/O (TTL), SPI slave select input, and analog input 4. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | OSC1/CLKI | input | Oscillator crystal input or external clock source input (ST buffer in RC mode, otherwise CMOS). |
| 10 | OSC2/CLKO | output | Oscillator crystal output connecting to crystal or resonator; in RC mode outputs CLKO at 1/4 the OSC1 frequency. |
| 11 | RC0/T1OSO/T1CKI | bidirectional | Digital I/O (Schmitt Trigger), Timer1 oscillator output, and Timer1 external clock input. |
| 12 | RC1/T1OSI/CCP2 | bidirectional | Digital I/O (Schmitt Trigger), Timer1 oscillator input, and CCP2 capture input / compare output / PWM output. |
| 13 | RC2/CCP1 | bidirectional | Digital I/O (Schmitt Trigger) and CCP1 capture input / compare output / PWM output. |
| 14 | RC3/SCK/SCL | bidirectional | Digital I/O (Schmitt Trigger), synchronous serial clock input/output for SPI mode and for I2C mode. |
| 15 | RC4/SDI/SDA | bidirectional | Digital I/O (Schmitt Trigger), SPI data in, and I2C data I/O. |
| 16 | RC5/SDO | bidirectional | Digital I/O (Schmitt Trigger) and SPI data out. |
| 17 | RC6/TX/CK | bidirectional | Digital I/O (Schmitt Trigger), USART asynchronous transmit, and USART synchronous clock. |
| 18 | RC7/RX/DT | bidirectional | Digital I/O (Schmitt Trigger), USART asynchronous receive, and USART synchronous data. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for logic and I/O pins. |
| 21 | RB0/INT | bidirectional | Digital I/O (TTL/Schmitt Trigger) and external interrupt input. |
| 22 | RB1 | bidirectional | Digital I/O (TTL), with software-programmable weak pull-up. |
| 23 | RB2 | bidirectional | Digital I/O (TTL), with software-programmable weak pull-up. |
| 24 | RB3/PGM | bidirectional | Digital I/O (TTL) and low voltage ICSP programming enable pin. |
| 25 | RB4 | bidirectional | Digital I/O (TTL), with software-programmable weak pull-up. |
| 26 | RB5 | bidirectional | Digital I/O (TTL), with software-programmable weak pull-up. |
| 27 | RB6/PGC | bidirectional | Digital I/O (TTL/Schmitt Trigger) and In-Circuit Debugger and ICSP programming clock. |
| 28 | RB7/PGD | bidirectional | Digital I/O (TTL/Schmitt Trigger) and In-Circuit Debugger and ICSP programming data. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-28-300mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage on VDD with respect to VSS | VDD | -0.3 | 6.5 | V | 121 | ||
| Ambient temperature under bias | -55 | 125 | °C | under bias | 121 | ||
| Storage temperature | -65 | 150 | °C | 121 | |||
| Voltage on MCLR with respect to VSS | MCLR | 0 | 13.5 | V | (Note 2) | 121 | |
| Voltage on RA4 with respect to VSS | RA4 | 0 | 12 | V | 121 | ||
| Voltage on any pin with respect to VSS | -0.3 | V | except VDD, MCLR and RA4; upper limit printed as VDD + 0.3V | 121 | |||
| Total power dissipation | 1 | W | (Note 1) | 121 | |||
| Input clamp current | IIK | -20 | 20 | mA | VI < 0 or VI > VDD | 121 | |
| Output clamp current | IOK | -20 | 20 | mA | VO < 0 or VO > VDD | 121 | |
| Operating temperature | TA | -40 | 125 | °C | -40°C ≤ TA ≤ +125°C for extended | 123 | |
| Supply voltage PIC16F7X | VDD | 4 | 5.5 | V | All configurations | 123 | |
| Brown-out Reset voltage | VBOR | 3.65 | 4 | 4.35 | V | BODEN bit in configuration word enabled | 123 |
| RAM data retention voltage | VDR | 1.5 | V | 123 | |||
| Supply current XT/RC osc | IDD | 0.9 | 4 | mA | XT, RC osc configuration FOSC = 4 MHz, VDD = 5.5V (Note 4) | 124 | |
| Supply current HS osc | IDD | 5.2 | 15 | mA | HS osc configuration FOSC = 20 MHz, VDD = 5.5V | 124 | |
| Brown-out Reset current | ΔIBOR | 25 | 200 | µA | BOR enabled, VDD = 5.0V | 124 | |
| Power-down current, WDT enabled, extended | IPD | 10.5 | 57 | µA | VDD = 4.0V, WDT enabled, -40°C to +125°C | 124 | |
| Power-down current, WDT disabled, extended | IPD | 1.5 | 42 | µA | VDD = 4.0V, WDT disabled, -40°C to +125°C | 124 | |
| Brown-out Reset current (D023) | ΔIBOR | 25 | 200 | µA | BOR enabled, VDD = 5.0V | 124 | |
| PORTB weak pull-up current | IPURB | 50 | 250 | 400 | µA | VDD = 5V, VPIN = VSS | 125 |
| Input low voltage, I/O ports with TTL buffer | VIL | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 125 | ||
| Input high voltage, I/O ports with TTL buffer | VIH | 2 | V | 4.5V ≤ VDD ≤ 5.5V | 125 | ||
| Input leakage current, I/O ports | IIL | -1 | 1 | µA | Vss ≤ VPIN ≤ VDD, pin at hi-impedance | 125 | |
| Input leakage current, MCLR and RA4/T0CKI | IIL | -5 | 5 | µA | Vss ≤ VPIN ≤ VDD | 125 | |
| Input leakage current, OSC1 | IIL | -5 | 5 | µA | Vss ≤ VPIN ≤ VDD, XT, HS and LP osc configuration | 125 | |
| Output low voltage, I/O ports | VOL | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40°C to +125°C | 126 | ||
| Output low voltage, OSC2/CLKOUT (RC osc) | VOL | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V, -40°C to +125°C | 126 | ||
| Open drain high voltage, RA4 pin | VOD | 12 | V | RA4 pin | 126 | ||
| Capacitive loading, OSC2 pin | COSC2 | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 126 | ||
| Capacitive loading, all I/O pins and OSC2 (RC mode) | CIO | 50 | pF | 126 | |||
| Capacitive loading, SCL and SDA in I2C mode | CB | 400 | pF | 126 | |||
| Program FLASH endurance | EP | 100 | 1000 | E/W | 25°C at 5V | 126 | |
| VDD for read, program FLASH | VPR | 2 | 5.5 | V | 126 | ||
| A/D reference voltage | VREF | 2.5 | 5.5 | V | -40°C to +125°C | 140 | |
| A/D reference voltage | VREF | 2.2 | 5.5 | V | 0°C to +125°C | 140 | |
| Recommended impedance of analog voltage source | ZAIN | 10 | kΩ | 140 | |||
| A/D conversion current (VDD) | IAD | 180 | µA | Average current consumption when A/D is on (Note 1) | 140 | ||
| External CLKIN frequency, XT osc mode | FOSC | 1 | MHz | XT osc mode | 126 |
CAD (KiCad official)
- Symbol:
PIC16F73-E - Footprint:
Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm - 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files:
pic16f73-e-etched.step/pic16f73-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f73-e.step/pic16f73-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (174 pp, sha256
81a107b5141fded6, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PIC16F73-E
**Microchip Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil
PIC16F73-E from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR/VPP | input | Master Clear (Reset) input, an active low RESET to the device, and programming voltage input VPP. |
| 2 | RA0/AN0 | bidirectional | Digital I/O (TTL) with analog input 0. |
| 3 | RA1/AN1 | bidirectional | Digital I/O (TTL) with analog input 1. |
| 4 | RA2/AN2 | bidirectional | Digital I/O (TTL) with analog input 2. |
| 5 | RA3/AN3/VREF | bidirectional | Digital I/O (TTL) with analog input 3 and A/D reference voltage input VREF. |
| 6 | RA4/T0CKI | bidirectional | Digital I/O (Schmitt Trigger input), open drain when configured as output, and Timer0 external clock input. |
| 7 | RA5/SS/AN4 | bidirectional | Digital I/O (TTL), SPI slave select input, and analog input 4. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | OSC1/CLKI | input | Oscillator crystal input or external clock source input (ST buffer in RC mode, otherwise CMOS). |
| 10 | OSC2/CLKO | output | Oscillator crystal output connecting to crystal or resonator; in RC mode outputs CLKO at 1/4 the OSC1 frequency. |
| 11 | RC0/T1OSO/T1CKI | bidirectional | Digital I/O (Schmitt Trigger), Timer1 oscillator output, and Timer1 external clock input. |
| 12 | RC1/T1OSI/CCP2 | bidirectional | Digital I/O (Schmitt Trigger), Timer1 oscillator input, and CCP2 capture input / compare output / PWM output. |
| 13 | RC2/CCP1 | bidirectional | Digital I/O (Schmitt Trigger) and CCP1 capture input / compare output / PWM output. |
| 14 | RC3/SCK/SCL | bidirectional | Digital I/O (Schmitt Trigger), synchronous serial clock input/output for SPI mode and for I2C mode. |
| 15 | RC4/SDI/SDA | bidirectional | Digital I/O (Schmitt Trigger), SPI data in, and I2C data I/O. |
| 16 | RC5/SDO | bidirectional | Digital I/O (Schmitt Trigger) and SPI data out. |
| 17 | RC6/TX/CK | bidirectional | Digital I/O (Schmitt Trigger), USART asynchronous transmit, and USART synchronous clock. |
| 18 | RC7/RX/DT | bidirectional | Digital I/O (Schmitt Trigger), USART asynchronous receive, and USART synchronous data. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for logic and I/O pins. |
| 21 | RB0/INT | bidirectional | Digital I/O (TTL/Schmitt Trigger) and external interrupt input. |
| 22 | RB1 | bidirectional | Digital I/O (TTL), with software-programmable weak pull-up. |
| 23 | RB2 | bidirectional | Digital I/O (TTL), with software-programmable weak pull-up. |
| 24 | RB3/PGM | bidirectional | Digital I/O (TTL) and low voltage ICSP programming enable pin. |
| 25 | RB4 | bidirectional | Digital I/O (TTL), with software-programmable weak pull-up. |
| 26 | RB5 | bidirectional | Digital I/O (TTL), with software-programmable weak pull-up. |
| 27 | RB6/PGC | bidirectional | Digital I/O (TTL/Schmitt Trigger) and In-Circuit Debugger and ICSP programming clock. |
| 28 | RB7/PGD | bidirectional | Digital I/O (TTL/Schmitt Trigger) and In-Circuit Debugger and ICSP programming data. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-28-300mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage on VDD with respect to VSS | VDD | -0.3 | | 6.5 | V | | 121 |
| Ambient temperature under bias | | -55 | | 125 | °C | under bias | 121 |
| Storage temperature | | -65 | | 150 | °C | | 121 |
| Voltage on MCLR with respect to VSS | MCLR | 0 | | 13.5 | V | (Note 2) | 121 |
| Voltage on RA4 with respect to VSS | RA4 | 0 | | 12 | V | | 121 |
| Voltage on any pin with respect to VSS | | -0.3 | | | V | except VDD, MCLR and RA4; upper limit printed as VDD + 0.3V | 121 |
| Total power dissipation | | | | 1 | W | (Note 1) | 121 |
| Input clamp current | IIK | -20 | | 20 | mA | VI < 0 or VI > VDD | 121 |
| Output clamp current | IOK | -20 | | 20 | mA | VO < 0 or VO > VDD | 121 |
| Operating temperature | TA | -40 | | 125 | °C | -40°C ≤ TA ≤ +125°C for extended | 123 |
| Supply voltage PIC16F7X | VDD | 4 | | 5.5 | V | All configurations | 123 |
| Brown-out Reset voltage | VBOR | 3.65 | 4 | 4.35 | V | BODEN bit in configuration word enabled | 123 |
| RAM data retention voltage | VDR | | 1.5 | | V | | 123 |
| Supply current XT/RC osc | IDD | | 0.9 | 4 | mA | XT, RC osc configuration FOSC = 4 MHz, VDD = 5.5V (Note 4) | 124 |
| Supply current HS osc | IDD | | 5.2 | 15 | mA | HS osc configuration FOSC = 20 MHz, VDD = 5.5V | 124 |
| Brown-out Reset current | ΔIBOR | | 25 | 200 | µA | BOR enabled, VDD = 5.0V | 124 |
| Power-down current, WDT enabled, extended | IPD | | 10.5 | 57 | µA | VDD = 4.0V, WDT enabled, -40°C to +125°C | 124 |
| Power-down current, WDT disabled, extended | IPD | | 1.5 | 42 | µA | VDD = 4.0V, WDT disabled, -40°C to +125°C | 124 |
| Brown-out Reset current (D023) | ΔIBOR | | 25 | 200 | µA | BOR enabled, VDD = 5.0V | 124 |
| PORTB weak pull-up current | IPURB | 50 | 250 | 400 | µA | VDD = 5V, VPIN = VSS | 125 |
| Input low voltage, I/O ports with TTL buffer | VIL | | | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 125 |
| Input high voltage, I/O ports with TTL buffer | VIH | 2 | | | V | 4.5V ≤ VDD ≤ 5.5V | 125 |
| Input leakage current, I/O ports | IIL | -1 | | 1 | µA | Vss ≤ VPIN ≤ VDD, pin at hi-impedance | 125 |
| Input leakage current, MCLR and RA4/T0CKI | IIL | -5 | | 5 | µA | Vss ≤ VPIN ≤ VDD | 125 |
| Input leakage current, OSC1 | IIL | -5 | | 5 | µA | Vss ≤ VPIN ≤ VDD, XT, HS and LP osc configuration | 125 |
| Output low voltage, I/O ports | VOL | | | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40°C to +125°C | 126 |
| Output low voltage, OSC2/CLKOUT (RC osc) | VOL | | | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V, -40°C to +125°C | 126 |
| Open drain high voltage, RA4 pin | VOD | | | 12 | V | RA4 pin | 126 |
| Capacitive loading, OSC2 pin | COSC2 | | | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 126 |
| Capacitive loading, all I/O pins and OSC2 (RC mode) | CIO | | | 50 | pF | | 126 |
| Capacitive loading, SCL and SDA in I2C mode | CB | | | 400 | pF | | 126 |
| Program FLASH endurance | EP | 100 | 1000 | | E/W | 25°C at 5V | 126 |
| VDD for read, program FLASH | VPR | 2 | | 5.5 | V | | 126 |
| A/D reference voltage | VREF | 2.5 | | 5.5 | V | -40°C to +125°C | 140 |
| A/D reference voltage | VREF | 2.2 | | 5.5 | V | 0°C to +125°C | 140 |
| Recommended impedance of analog voltage source | ZAIN | | | 10 | kΩ | | 140 |
| A/D conversion current (VDD) | IAD | | 180 | | µA | Average current consumption when A/D is on (Note 1) | 140 |
| External CLKIN frequency, XT osc mode | FOSC | | | 1 | MHz | XT osc mode | 126 |
## CAD (KiCad official)
- Symbol: `PIC16F73-E`
- Footprint: `Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm`
- 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files: `pic16f73-e-etched.step` / `pic16f73-e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic16f73-e.step` / `pic16f73-e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/pic16f73-e-datasheet.pdf) (174 pp, sha256 `81a107b5141fded6`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic16f73-e-datasheet.pdf)