main
Ray
pic16f726-i-so: renamed from pic16f726-i, the part it was built from (PIC16F726-I/SO); family listed
c27260a
PIC16F726-I/SO
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil
PIC16F726-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE3/MCLR/VPP | input | Input-only pin: MCLR Reset input with weak pull-up to VDD when MCLRE=1, and programming voltage VPP (HV). |
| 2 | RA0/AN0/SS/VCAP | bidirectional | General purpose I/O with ADC analog input AN0, SSP slave select input (alternate location RA5), and voltage regulator VCAP pin on PIC16F72X only. |
| 3 | RA1/AN1 | bidirectional | General purpose I/O with ADC analog input AN1. |
| 4 | RA2/AN2 | bidirectional | General purpose I/O with ADC analog input AN2. |
| 5 | RA3/AN3/VREF | bidirectional | General purpose I/O with ADC analog input AN3 and ADC voltage reference input VREF. |
| 6 | RA4/CPS6/T0CKI | bidirectional | General purpose I/O with capacitive sensing input CPS6 and Timer0 clock input T0CKI, which works independently of the TRISA4 setting. |
| 7 | RA5/AN4/CPS7/SS/VCAP | bidirectional | General purpose I/O with ADC analog input AN4, capacitive sensing input CPS7, SSP slave select input (alternate location RA0), and VCAP pin on PIC16F72X only. |
| 8 | VSS | power_in | Ground reference. |
| 9 | RA7/OSC1/CLKIN | bidirectional | General purpose I/O with crystal/resonator connection OSC1 (LP, XT, HS modes), external clock input CLKIN (EC mode) or RC oscillator connection (RC mode). |
| 10 | RA6/OSC2/CLKOUT/VCAP | bidirectional | General purpose I/O with crystal/resonator connection OSC2 (LP, XT, HS modes), FOSC/4 clock output CLKOUT, and VCAP pin on PIC16F72X only. |
| 11 | RC0/T1OSO/T1CKI | bidirectional | General purpose I/O with Timer1 oscillator output T1OSO and Timer1 clock input T1CKI. |
| 12 | RC1/T1OSI/CCP2 | bidirectional | General purpose I/O with Timer1 oscillator input T1OSI and Capture/Compare/PWM2 function CCP2 (alternate location RB3). |
| 13 | RC2/CCP1 | bidirectional | General purpose I/O with Capture/Compare/PWM1 function CCP1. |
| 14 | RC3/SCK/SCL | bidirectional | General purpose I/O with SPI clock SCK or I2C clock SCL (open drain). |
| 15 | RC4/SDI/SDA | bidirectional | General purpose I/O with SPI data input SDI or I2C data input/output SDA. |
| 16 | RC5/SDO | bidirectional | General purpose I/O with SPI data output SDO. |
| 17 | RC6/TX/CK | bidirectional | General purpose I/O with AUSART asynchronous transmit TX or synchronous clock CK. |
| 18 | RC7/RX/DT | bidirectional | General purpose I/O with AUSART asynchronous input RX or synchronous data DT. |
| 19 | VSS | power_in | Ground reference. |
| 20 | VDD | power_in | Positive supply. |
| 21 | RB0/AN12/CPS0/INT | bidirectional | General purpose I/O with individually controlled interrupt-on-change and pull-up, ADC input AN12, capacitive sensing input CPS0, and external interrupt INT. |
| 22 | RB1/AN10/CPS1 | bidirectional | General purpose I/O with individually controlled interrupt-on-change and pull-up, ADC input AN10, and capacitive sensing input CPS1. |
| 23 | RB2/AN8/CPS2 | bidirectional | General purpose I/O with individually controlled interrupt-on-change and pull-up, ADC input AN8, and capacitive sensing input CPS2. |
| 24 | RB3/AN9/CPS3/CCP2 | bidirectional | General purpose I/O with interrupt-on-change and pull-up, ADC input AN9, capacitive sensing input CPS3, and Capture 2/Compare 2/PWM2 function CCP2 (alternate location RC1). |
| 25 | RB4/AN11/CPS4 | bidirectional | General purpose I/O with individually controlled interrupt-on-change and pull-up, ADC input AN11, and capacitive sensing input CPS4. |
| 26 | RB5/AN13/CPS5/T1G | bidirectional | General purpose I/O with individually controlled interrupt-on-change and pull-up, ADC input AN13, capacitive sensing input CPS5, and Timer1 gate input T1G. |
| 27 | RB6/ICSPCLK | bidirectional | General purpose I/O with interrupt-on-change and pull-up, and In-Circuit Serial Programming clock ICSPCLK. |
| 28 | RB7/ICSPDAT | bidirectional | General purpose I/O with interrupt-on-change and pull-up, and In-Circuit Serial Programming data ICSPDAT. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-28-300mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
CAD (KiCad official)
- Symbol:
PIC16F726-I - Footprint:
Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm - 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files:
pic16f726-i-etched.step/pic16f726-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f726-i.step/pic16f726-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (282 pp, sha256
00bf4f739ca402f9, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC16F726-I/SO. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC16F726-I/SP
# PIC16F726-I/SO
**Microchip Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil
PIC16F726-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE3/MCLR/VPP | input | Input-only pin: MCLR Reset input with weak pull-up to VDD when MCLRE=1, and programming voltage VPP (HV). |
| 2 | RA0/AN0/SS/VCAP | bidirectional | General purpose I/O with ADC analog input AN0, SSP slave select input (alternate location RA5), and voltage regulator VCAP pin on PIC16F72X only. |
| 3 | RA1/AN1 | bidirectional | General purpose I/O with ADC analog input AN1. |
| 4 | RA2/AN2 | bidirectional | General purpose I/O with ADC analog input AN2. |
| 5 | RA3/AN3/VREF | bidirectional | General purpose I/O with ADC analog input AN3 and ADC voltage reference input VREF. |
| 6 | RA4/CPS6/T0CKI | bidirectional | General purpose I/O with capacitive sensing input CPS6 and Timer0 clock input T0CKI, which works independently of the TRISA4 setting. |
| 7 | RA5/AN4/CPS7/SS/VCAP | bidirectional | General purpose I/O with ADC analog input AN4, capacitive sensing input CPS7, SSP slave select input (alternate location RA0), and VCAP pin on PIC16F72X only. |
| 8 | VSS | power_in | Ground reference. |
| 9 | RA7/OSC1/CLKIN | bidirectional | General purpose I/O with crystal/resonator connection OSC1 (LP, XT, HS modes), external clock input CLKIN (EC mode) or RC oscillator connection (RC mode). |
| 10 | RA6/OSC2/CLKOUT/VCAP | bidirectional | General purpose I/O with crystal/resonator connection OSC2 (LP, XT, HS modes), FOSC/4 clock output CLKOUT, and VCAP pin on PIC16F72X only. |
| 11 | RC0/T1OSO/T1CKI | bidirectional | General purpose I/O with Timer1 oscillator output T1OSO and Timer1 clock input T1CKI. |
| 12 | RC1/T1OSI/CCP2 | bidirectional | General purpose I/O with Timer1 oscillator input T1OSI and Capture/Compare/PWM2 function CCP2 (alternate location RB3). |
| 13 | RC2/CCP1 | bidirectional | General purpose I/O with Capture/Compare/PWM1 function CCP1. |
| 14 | RC3/SCK/SCL | bidirectional | General purpose I/O with SPI clock SCK or I2C clock SCL (open drain). |
| 15 | RC4/SDI/SDA | bidirectional | General purpose I/O with SPI data input SDI or I2C data input/output SDA. |
| 16 | RC5/SDO | bidirectional | General purpose I/O with SPI data output SDO. |
| 17 | RC6/TX/CK | bidirectional | General purpose I/O with AUSART asynchronous transmit TX or synchronous clock CK. |
| 18 | RC7/RX/DT | bidirectional | General purpose I/O with AUSART asynchronous input RX or synchronous data DT. |
| 19 | VSS | power_in | Ground reference. |
| 20 | VDD | power_in | Positive supply. |
| 21 | RB0/AN12/CPS0/INT | bidirectional | General purpose I/O with individually controlled interrupt-on-change and pull-up, ADC input AN12, capacitive sensing input CPS0, and external interrupt INT. |
| 22 | RB1/AN10/CPS1 | bidirectional | General purpose I/O with individually controlled interrupt-on-change and pull-up, ADC input AN10, and capacitive sensing input CPS1. |
| 23 | RB2/AN8/CPS2 | bidirectional | General purpose I/O with individually controlled interrupt-on-change and pull-up, ADC input AN8, and capacitive sensing input CPS2. |
| 24 | RB3/AN9/CPS3/CCP2 | bidirectional | General purpose I/O with interrupt-on-change and pull-up, ADC input AN9, capacitive sensing input CPS3, and Capture 2/Compare 2/PWM2 function CCP2 (alternate location RC1). |
| 25 | RB4/AN11/CPS4 | bidirectional | General purpose I/O with individually controlled interrupt-on-change and pull-up, ADC input AN11, and capacitive sensing input CPS4. |
| 26 | RB5/AN13/CPS5/T1G | bidirectional | General purpose I/O with individually controlled interrupt-on-change and pull-up, ADC input AN13, capacitive sensing input CPS5, and Timer1 gate input T1G. |
| 27 | RB6/ICSPCLK | bidirectional | General purpose I/O with interrupt-on-change and pull-up, and In-Circuit Serial Programming clock ICSPCLK. |
| 28 | RB7/ICSPDAT | bidirectional | General purpose I/O with interrupt-on-change and pull-up, and In-Circuit Serial Programming data ICSPDAT. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-28-300mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
## CAD (KiCad official)
- Symbol: `PIC16F726-I`
- Footprint: `Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm`
- 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files: `pic16f726-i-etched.step` / `pic16f726-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic16f726-i.step` / `pic16f726-i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/pic16f726-i-datasheet.pdf) (282 pp, sha256 `00bf4f739ca402f9`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic16f726-i-datasheet.pdf)
## Other parts in this family
This page is **PIC16F726-I/SO**. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC16F726-I/SP