3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC16F685T-I
Microchip Tech · MICROCHIP · SSOP-20-208mil
PIC16F685T-I from Microchip Tech, in a SSOP-20-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply; the device operates from 2.0V to 5.5V. |
| 2 | RA5/T1CKI/OSC1/CLKIN | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, also Timer1 clock input, crystal/resonator OSC1 and external clock/RC input CLKIN. |
| 3 | RA4/AN3/T1G/OSC2/CLKOUT | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, also A/D channel 3 input, Timer1 gate input, crystal OSC2 and FOSC/4 CLKOUT. |
| 4 | RA3/MCLR/VPP | input | General purpose input with interrupt-on-change, Master Clear with internal pull-up, or high-voltage programming voltage VPP. |
| 5 | RC5/CCP1/P1A | bidirectional | General purpose I/O, Capture/Compare input CCP1 and PWM output P1A. |
| 6 | RC4/C2OUT/P1B | bidirectional | General purpose I/O, Comparator C2 output and PWM output P1B. |
| 7 | RC3/AN7/C12IN3-/P1C | bidirectional | General purpose I/O, A/D channel 7 input, Comparator C1 or C2 negative input and PWM output P1C. |
| 8 | RC6/AN8 | bidirectional | General purpose I/O or A/D channel 8 input. |
| 9 | RC7/AN9 | bidirectional | General purpose I/O or A/D channel 9 input. |
| 10 | RB7 | bidirectional | General purpose I/O with interrupt-on-change and individually enabled weak pull-up. |
| 11 | RB6 | bidirectional | General purpose I/O with interrupt-on-change and individually enabled weak pull-up. |
| 12 | RB5/AN11 | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, also A/D channel 11 input. |
| 13 | RB4/AN10 | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, also A/D channel 10 input. |
| 14 | RC2/AN6/C12IN2-/P1D | bidirectional | General purpose I/O, A/D channel 6 input, Comparator C1 or C2 negative input and PWM output P1D. |
| 15 | RC1/AN5/C12IN1- | bidirectional | General purpose I/O, A/D channel 5 input and Comparator C1 or C2 negative input. |
| 16 | RC0/AN4/C2IN+ | bidirectional | General purpose I/O, A/D channel 4 input and Comparator C2 positive input. |
| 17 | RA2/AN2/T0CKI/INT/C1OUT | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, also A/D channel 2 input, Timer0 clock input, external interrupt and Comparator C1 output. |
| 18 | RA1/AN1/C12IN0-/VREF/ICSPCLK | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, also A/D channel 1, Comparator C1/C2 negative input, external A/D voltage reference and ICSP clock. |
| 19 | RA0/AN0/C1IN+/ICSPDAT/ULPWU | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, also A/D channel 0, Comparator C1 positive input, ICSP data I/O and Ultra Low-Power Wake-up input. |
| 20 | VSS | power_in | Ground reference. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-20-208mil |
| Category | Embedded Processors & Controllers |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 2 | 5.5 | V | FOSC <= 8 MHz: HFINTOSC, EC | 227 | |
| RAM Data Retention Voltage | VDR | 1.5 | V | Device in Sleep mode | 227 | ||
| VDD Rise Rate for POR | SVDD | 0.05 | V/ms | 227 | |||
| Ambient temperature under bias | -40 | 125 | °C | 225 | |||
| Storage temperature | -65 | 150 | °C | 225 | |||
| Voltage on VDD with respect to VSS | VDD | -0.3 | 6.5 | V | 225 | ||
| Voltage on MCLR with respect to VSS | -0.3 | 13.5 | V | 225 | |||
| Maximum current out of VSS pin | 300 | mA | 225 | ||||
| Maximum current into VDD pin | 250 | mA | 225 | ||||
| Maximum output current sunk by any I/O pin | 25 | mA | 225 | ||||
| Maximum output current sourced by any I/O pin | 25 | mA | 225 | ||||
| Maximum current sunk by PORTA, PORTB and PORTC (combined) | 200 | mA | 225 | ||||
| Maximum current sourced by PORTA, PORTB and PORTC (combined) | 200 | mA | 225 | ||||
| Operating temperature (Industrial) | TA | -40 | 85 | °C | industrial | 227 | |
| Supply Current, LP mode 32 kHz | IDD | 13 | 19 | µA | FOSC = 32 kHz, LP Oscillator mode, VDD = 2.0V | 228 | |
| Supply Current, XT mode 4 MHz | IDD | 260 | 360 | µA | FOSC = 4 MHz, XT Oscillator mode, VDD = 2.0V | 228 | |
| Supply Current, HS mode 20 MHz | IDD | 4 | 5.45 | mA | FOSC = 20 MHz, HS Oscillator mode, VDD = 5.0V | 228 | |
| Power-down Base Current | IPD | 0.05 | 1.2 | µA | VDD = 2.0V, WDT, BOR, Comparators, VREF and T1OSC disabled | 229 | |
| Power-down Base Current | IPD | 0.35 | 1.8 | µA | VDD = 5.0V, WDT, BOR, Comparators, VREF and T1OSC disabled | 229 | |
| WDT Current | IPD | 3 | 7 | µA | VDD = 5.0V | 229 | |
| Input Low Voltage, I/O port with TTL buffer | VIL | 0.8 | V | 4.5V <= VDD <= 5.5V | 231 | ||
| Input Low Voltage, OSC1 (XT and LP modes) | VIL | 0.3 | V | 231 | |||
| Input High Voltage, I/O ports with TTL buffer | VIH | 2 | V | 4.5V <= VDD <= 5.5V | 231 | ||
| Input High Voltage, OSC1 (XT and LP modes) | VIH | 1.6 | V | 231 | |||
| Input Leakage Current, I/O ports | IIL | 0.1 | 1 | µA | VSS <= VPIN <= VDD, Pin at high-impedance | 231 | |
| Input Leakage Current, MCLR | IIL | 0.1 | 5 | µA | VSS <= VPIN <= VDD | 231 | |
| Input Leakage Current, OSC1 | IIL | 0.1 | 5 | µA | VSS <= VPIN <= VDD, XT, HS and LP oscillator configuration | 231 | |
| PORTA Weak Pull-up Current | IPUR | 50 | 250 | 400 | µA | VDD = 5.0V, VPIN = VSS | 231 |
| Output Low Voltage, I/O ports | VOL | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V (Ind.) | 231 | ||
| OSC2 pin capacitance | COSC2 | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 232 | ||
| All I/O pins capacitance | CIO | 50 | pF | 232 | |||
| Data EEPROM Erase/Write Cycle Time | TDEW | 5 | 6 | ms | 232 | ||
| Program Flash VDD for Erase/Write | VPEW | 4.5 | 5.5 | V | 232 | ||
| Program Flash Erase/Write cycle time | TPEW | 2 | 2.5 | ms | 232 | ||
| Program Flash Characteristic Retention | TRETD | 40 | Year | Provided no other specifications are violated | 232 | ||
| Thermal Resistance Junction to Ambient | θJA | 108.1 | °C/W | 20-pin SSOP package | 233 | ||
| Thermal Resistance Junction to Case | θJC | 32.2 | °C/W | 20-pin SSOP package | 233 | ||
| Die Temperature | TDIE | 150 | °C | For derated power calculations | 233 | ||
| Calibrated HFINTOSC Frequency (1%) | HFOSC | 7.92 | 8 | 8.08 | MHz | VDD = 3.5V, 25°C | 236 |
| Calibrated HFINTOSC Frequency (5%) | HFOSC | 7.6 | 8 | 8.4 | MHz | 2.0V <= VDD <= 5.5V, -40°C <= TA <= +85°C (Ind.) | 236 |
| Uncalibrated LFINTOSC Frequency | LFOSC | 15 | 31 | 45 | kHz | 236 | |
| Brown-out Reset Voltage | VBOR | 2 | 2.2 | V | 239 | ||
| Power-up Timer Period | TPWRT | 40 | 65 | 140 | ms | 239 | |
| Watchdog Timer Time-out Period (No Prescaler) | TWDT | 10 | 17 | 25 | ms | VDD = 5V, -40°C to +85°C | 239 |
| Comparator Input Offset Voltage | VOS | -10 | 5 | 10 | mV | 242 | |
| Comparator Input Common Mode Voltage | VCM | 0 | V | 242 | |||
| VR voltage output | VROUT | 0.5 | 0.6 | 0.7 | V | 242 | |
| ADC Resolution | NR | 10 | bits | 249 | |||
| ADC Integral Error | EIL | 1 | LSb | VREF = 5.12V | 249 | ||
| ADC Differential Error | EDL | 1 | LSb | No missing codes to 10 bits, VREF = 5.12V | 249 | ||
| ADC Reference Voltage | VREF | 2.2 | V | Absolute minimum to ensure 1 LSb accuracy | 249 |
CAD (KiCad official)
- Symbol:
PIC16F685T-I - Footprint:
Package_SO:SSOP-20_5.3x7.2mm_P0.65mm - 3D model: SSOP-20-208mil (KiCad packages3D, STEP)
- 3D model files:
pic16f685t-i-etched.step/pic16f685t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f685t-i.step/pic16f685t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (298 pp, sha256
e501369e180e27c1, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).