component
PIC16F1947T-I/PT
Public Made by Adomby adom
Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), TQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
6c95ab9
PIC16F1947T-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)
PIC16F1947T-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE1 | bidirectional | General purpose I/O (Schmitt trigger input, CMOS output); also PWM output P2C (alternate location) and LCD analog input VLCD2. |
| 2 | RE0 | bidirectional | General purpose I/O (Schmitt trigger input, CMOS output); also PWM output P2D (alternate location) and LCD analog input VLCD1. |
| 3 | RG0 | bidirectional | General purpose I/O; also CCP3 capture/compare/PWM, PWM output P3A and LCD analog output SEG42. |
| 4 | RG1 | bidirectional | General purpose I/O; also A/D channel AN15, capacitive sensing input CPS15, EUSART2 asynchronous TX2 / synchronous CK2, comparator C3 output C3OUT and LCD analog output SEG43. |
| 5 | RG2 | bidirectional | General purpose I/O; also A/D channel AN14, capacitive sensing input CPS14, EUSART2 asynchronous RX2 / synchronous DT2, comparator C3 positive input C3IN+ and LCD analog output SEG44. |
| 6 | RG3 | bidirectional | General purpose I/O; also A/D channel AN13, capacitive sensing input CPS13, comparator C3 negative input C3IN0-, CCP4 capture/compare/PWM, PWM output P3D and LCD analog output SEG45. |
| 7 | RG5/MCLR/VPP | input | Input-only general purpose pin; with MCLRE set it is the Master Clear input with internal pull-up, and it also carries the high-voltage programming supply VPP. |
| 8 | RG4 | bidirectional | General purpose I/O; also A/D channel AN12, capacitive sensing input CPS12, comparator C3 negative input C3IN1-, CCP5 capture/compare/PWM, PWM output P1D and LCD analog output SEG26. |
| 9 | VSS | power_in | Ground reference. |
| 10 | VDD | power_in | Positive supply. |
| 11 | RF7 | bidirectional | General purpose I/O; also A/D channel AN5, capacitive sensing input CPS5, comparator negative inputs C1IN3-/C2IN3-/C3IN3-, SPI slave select input SS1 and LCD analog output SEG25. |
| 12 | RF6 | bidirectional | General purpose I/O; also A/D channel AN11, capacitive sensing input CPS11, comparator C1 positive input C1IN+ and LCD analog output SEG24. |
| 13 | RF5 | bidirectional | General purpose I/O; also A/D channel AN10, capacitive sensing input CPS10, comparator negative inputs C1IN1-/C2IN1-, DAC output DACOUT and LCD analog output SEG23. |
| 14 | RF4 | bidirectional | General purpose I/O; also A/D channel AN9, capacitive sensing input CPS9, comparator C2 positive input C2IN+ and LCD analog output SEG22. |
| 15 | RF3 | bidirectional | General purpose I/O; also A/D channel AN8, capacitive sensing input CPS8, comparator negative inputs C1IN2-/C2IN2-/C3IN2- and LCD analog output SEG21. |
| 16 | RF2 | bidirectional | General purpose I/O; also A/D channel AN7, capacitive sensing input CPS7, comparator C1 output C1OUT, SR Latch non-inverting output SRQ and LCD analog output SEG20. |
| 17 | RF1 | bidirectional | General purpose I/O; also A/D channel AN6, capacitive sensing input CPS6, comparator C2 output C2OUT, SR Latch inverting output SRNQ and LCD analog output SEG19. |
| 18 | RF0 | bidirectional | General purpose I/O; also A/D channel AN16, capacitive sensing input CPS16, comparator negative inputs C1IN0-/C2IN0-, LCD analog output SEG41, and the VCAP voltage regulator filter capacitor connection. |
| 19 | AVDD | power_in | Dedicated power connection for the on-board analog circuits, separate from VDD to reduce digital switching noise. |
| 20 | AVSS | power_in | Dedicated ground connection for the on-board analog circuits, separate from VSS to reduce digital switching noise. |
| 21 | RA3 | bidirectional | General purpose I/O (Schmitt trigger input, CMOS output); also A/D channel AN3, A/D voltage reference input VREF+, capacitive sensing input CPS3 and LCD analog output SEG35. |
| 22 | RA2 | bidirectional | General purpose I/O (Schmitt trigger input, CMOS output); also A/D channel AN2, A/D negative voltage reference input VREF-, capacitive sensing input CPS2 and LCD analog output SEG34. |
| 23 | RA1 | bidirectional | General purpose I/O (Schmitt trigger input, CMOS output); also A/D channel AN1, capacitive sensing input CPS1 and LCD analog output SEG18. |
| 24 | RA0 | bidirectional | General purpose I/O (Schmitt trigger input, CMOS output); also A/D channel AN0, capacitive sensing input CPS0 and LCD analog output SEG33. |
| 25 | VSS | power_in | Ground reference. |
| 26 | VDD | power_in | Positive supply. |
| 27 | RA5 | bidirectional | General purpose I/O; also A/D channel AN4, capacitive sensing input CPS4 and LCD analog output SEG15. |
| 28 | RA4 | bidirectional | General purpose I/O; also Timer0 clock input T0CKI (Schmitt trigger) and LCD analog output SEG14. |
| 29 | RC1 | bidirectional | General purpose I/O; also Timer1 oscillator input T1OSI, PWM output P2A and CCP2 capture/compare/PWM (default location, moved via APFCON) and LCD analog output SEG32. |
| 30 | RC0 | bidirectional | General purpose I/O (Schmitt trigger input, CMOS output); also Timer1 oscillator output T1OSO, Timer1 clock input T1CKI and LCD analog output SEG40. |
| 31 | RC6 | bidirectional | General purpose I/O; also EUSART1 asynchronous transmit TX1 / synchronous clock CK1 and LCD analog output SEG27. |
| 32 | RC7 | bidirectional | General purpose I/O; also EUSART1 asynchronous receive RX1 / synchronous data DT1 and LCD analog output SEG28. |
| 33 | RC2 | bidirectional | General purpose I/O; also CCP1 capture/compare/PWM, PWM output P1A and LCD analog output SEG13. |
| 34 | RC3 | bidirectional | General purpose I/O; also SPI1 clock SCK1, I2C1 clock SCL1 (open-drain) and LCD analog output SEG17. |
| 35 | RC4 | bidirectional | General purpose I/O; also SPI1 data input SDI1, I2C1 data SDA1 (open-drain) and LCD analog output SEG16. |
| 36 | RC5 | bidirectional | General purpose I/O; also SPI1 data output SDO1 and LCD analog output SEG12. |
| 37 | RB7 | bidirectional | General purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up; also ICSP data ICSPDAT, in-circuit debug data ICDDAT and LCD analog output SEG39. |
| 38 | VDD | power_in | Positive supply. |
| 39 | RA7 | bidirectional | General purpose I/O; also crystal/resonator input OSC1, external clock input CLKIN (EC mode) and LCD analog output SEG37. |
| 40 | RA6 | bidirectional | General purpose I/O; also crystal/resonator output OSC2 (LP, XT, HS modes), FOSC/4 output CLKOUT and LCD analog output SEG36. |
| 41 | VSS | power_in | Ground reference. |
| 42 | RB6 | bidirectional | General purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up; also ICSP clock ICSPCLK, in-circuit debug clock ICDCLK and LCD analog output SEG38. |
| 43 | RB5 | bidirectional | General purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up; also Timer1 gate input T1G (Schmitt trigger) and LCD analog output SEG29. |
| 44 | RB4 | bidirectional | General purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up; also LCD analog output SEG11. |
| 45 | RB3 | bidirectional | General purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up; also LCD analog output SEG10. |
| 46 | RB2 | bidirectional | General purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up; also LCD analog output SEG9. |
| 47 | RB1 | bidirectional | General purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up; also LCD analog output SEG8. |
| 48 | RB0 | bidirectional | General purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up; also external interrupt INT, SR Latch input SRI, ECCP auto-shutdown fault input FLT0 (Schmitt trigger) and LCD analog output SEG30. |
| 49 | RD7 | bidirectional | General purpose I/O (Schmitt trigger input, CMOS output); also SPI2 slave select input SS2 and LCD analog output SEG7. |
| 50 | RD6 | bidirectional | General purpose I/O; also SPI2 clock SCK2, I2C2 clock SCL2 (open-drain), PWM output P1B (alternate location) and LCD analog output SEG6. |
| 51 | RD5 | bidirectional | General purpose I/O; also SPI2 data input SDI2, I2C2 data SDA2 (open-drain), PWM output P1C (alternate location) and LCD analog output SEG5. |
| 52 | RD4 | bidirectional | General purpose I/O; also SPI2 data output SDO2, PWM output P3B (alternate location) and LCD analog output SEG4. |
| 53 | RD3 | bidirectional | General purpose I/O; also PWM output P3C (alternate location) and LCD analog output SEG3. |
| 54 | RD2 | bidirectional | General purpose I/O; also PWM output P2B (alternate location) and LCD analog output SEG2. |
| 55 | RD1 | bidirectional | General purpose I/O; also PWM output P2C (alternate location) and LCD analog output SEG1. |
| 56 | VSS | power_in | Ground reference. |
| 57 | VDD | power_in | Positive supply. |
| 58 | RD0 | bidirectional | General purpose I/O; also PWM output P2D (alternate location) and LCD analog output SEG0. |
| 59 | RE7 | bidirectional | General purpose I/O; also CCP2 capture/compare/PWM and PWM output P2A (alternate location, moved via APFCON) and LCD analog output SEG31. |
| 60 | RE6 | bidirectional | General purpose I/O; also PWM output P1B (default location) and LCD common driver COM3. |
| 61 | RE5 | bidirectional | General purpose I/O; also PWM output P1C (default location) and LCD common driver COM2. |
| 62 | RE4 | bidirectional | General purpose I/O; also PWM output P3B (default location) and LCD common driver COM1. |
| 63 | RE3 | bidirectional | General purpose I/O; also PWM output P3C (default location) and LCD common driver COM0. |
| 64 | RE2 | bidirectional | General purpose I/O; also PWM output P2B (default location) and LCD analog input VLCD3. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage on VDD with respect to VSS, PIC16F1946/47 | -0.3 | 6.5 | V | 376 | |||
| Voltage on VCAP pin with respect to VSS | -0.3 | 4 | V | 376 | |||
| Voltage on MCLR with respect to VSS | -0.3 | 9 | V | 376 | |||
| Maximum current out of VSS pin | 350 | mA | -40°C ≤ TA ≤ +85°C for industrial | 376 | |||
| Maximum current out of VSS pin | 120 | mA | -40°C ≤ TA ≤ +125°C for extended | 376 | |||
| Maximum current into VDD pin | 350 | mA | -40°C ≤ TA ≤ +85°C for industrial | 376 | |||
| Maximum current into VDD pin | 120 | mA | -40°C ≤ TA ≤ +125°C for extended | 376 | |||
| Clamp current, IK | IK | 20 | mA | VPIN < 0 or VPIN > VDD | 376 | ||
| Ambient temperature under bias | TA | -40 | 125 | °C | 376 | ||
| Storage temperature | -65 | 150 | °C | 376 | |||
| Operating Supply Voltage VDDMIN (FOSC ≤ 16 MHz), PIC16F1946/47 | VDD | 1.8 | 5.5 | V | FOSC ≤ 16 MHz | 380 | |
| Operating Supply Voltage VDDMIN (FOSC ≤ 32 MHz), PIC16F1946/47 | VDD | 2.5 | 5.5 | V | FOSC ≤ 32 MHz (NOTE 2) | 380 | |
| Operating Ambient Temperature Range, Industrial | TA | -40 | 85 | °C | Industrial | 377 | |
| RAM Data Retention Voltage, PIC16F1946/47 | VDR | 1.7 | V | Device in Sleep mode | 380 | ||
| Fixed Voltage Reference Voltage for ADC | VADFVR | -8 | 6 | % | 1.024V, VDD ≥ 2.5V; 2.048V, VDD ≥ 2.5V; 4.096V, VDD ≥ 4.75V | 380 | |
| Fixed Voltage Reference Voltage for Comparator and DAC | VCDAFVR | -11 | 7 | % | 1.024V, VDD ≥ 2.5V; 2.048V, VDD ≥ 2.5V; 4.096V, VDD ≥ 4.75V | 380 | |
| Fixed Voltage Reference Voltage for LCD Bias, Initial Accuracy | VLCDFVR | -11 | 10 | % | 3.072V | 380 | |
| VDD Rise Rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | 380 | |||
| Weak Pull-up Current | IPUR | 25 | 100 | 200 | µA | VDD = 3.3V, VPIN = VSS | 388 |
| Weak Pull-up Current | IPUR | 25 | 140 | 300 | µA | VDD = 5.0V, VPIN = VSS | 388 |
| Input Low Voltage, I/O PORT with TTL buffer | VIL | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 388 | ||
| Input Low Voltage, I/O PORT (max 0.15 × VDD) | VIL | 0.15 | VDD | 1.8V ≤ VDD ≤ 4.5V | 388 | ||
| Input Low Voltage, I/O PORT with Schmitt Trigger buffer (max 0.2 × VDD) | VIL | 0.2 | VDD | 2.0V ≤ VDD ≤ 5.5V | 388 | ||
| Input Low Voltage, I/O PORT with I2C levels (max 0.3 × VDD) | VIL | 0.3 | VDD | 388 | |||
| Input Low Voltage, I/O PORT with SMBus levels | VIL | 0.8 | V | 2.7V ≤ VDD ≤ 5.5V | 388 | ||
| Input Low Voltage, MCLR, OSC1 (RC mode) (max 0.2 × VDD) | VIL | 0.2 | VDD | OSC1 (RC mode) | 388 | ||
| Input Low Voltage, OSC1 (HS mode) (max 0.3 × VDD) | VIL | 0.3 | VDD | OSC1 (HS mode) | 388 | ||
| Input High Voltage, I/O ports with TTL buffer | VIH | 2 | V | 4.5V ≤ VDD ≤ 5.5V | 388 | ||
| Input High Voltage, I/O ports with Schmitt Trigger buffer (min 0.8 × VDD) | VIH | 0.8 | VDD | 2.0V ≤ VDD ≤ 5.5V | 388 | ||
| Input High Voltage, I/O ports with I2C levels (min 0.7 × VDD) | VIH | 0.7 | VDD | 388 | |||
| Input High Voltage, I/O ports with SMBus levels | VIH | 2.1 | V | 2.7V ≤ VDD ≤ 5.5V | 388 | ||
| Input High Voltage, MCLR (min 0.8 × VDD) | VIH | 0.8 | VDD | 388 | |||
| Input High Voltage, OSC1 (HS mode) (min 0.7 × VDD) | VIH | 0.7 | VDD | OSC1 (HS mode) | 388 | ||
| Input High Voltage, OSC1 (RC mode) (min 0.9 × VDD) | VIH | 0.9 | VDD | VDD ≥ 2.0V (Note 1) | 388 | ||
| Output Low Voltage, I/O ports | VOL | 0.6 | V | IOL = 8mA, VDD = 5V; IOL = 6mA, VDD = 3.3V; IOL = 1.8mA, VDD = 1.8V | 388 | ||
| Capacitive Loading, OSC2 pin | COSC2 | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 388 | ||
| Capacitive Loading, All I/O pins | CIO | 50 | pF | 388 | |||
| Byte Endurance, Data EEPROM | ED | 100 | K E/W | -40°C to +85°C | 389 | ||
| Erase/Write Cycle Time, Data EEPROM | TDEW | 4 | 5 | ms | 389 | ||
| Voltage on MCLR/VPP pin (programming) | VIHH | 8 | 9 | V | Required only if single-supply programming is disabled (Note 3, Note 4) | 389 | |
| Supply Current during Programming | IDDP | 10 | mA | 389 | |||
| Cell Endurance, Program Flash Memory | EP | 10 | K E/W | -40°C to +85°C (Note 1) | 389 | ||
| Self-timed Write Cycle Time, Program Flash | TIW | 2 | 2.5 | ms | 389 | ||
| Thermal Resistance Junction to Ambient, 64-pin TQFP | θJA | 48.3 | C/W | 64-pin TQFP package | 390 | ||
| Thermal Resistance Junction to Case, 64-pin TQFP | θJC | 26.1 | C/W | 64-pin TQFP package | 390 | ||
| Maximum Junction Temperature | TJMAX | 150 | °C | 390 | |||
| External CLKIN Frequency, EC Oscillator mode (high) | FOSC | 20 | MHz | EC Oscillator mode (high) | 392 | ||
| Oscillator Frequency, HS Oscillator mode | FOSC | 20 | MHz | HS Oscillator mode, VDD > 2.7V | 392 | ||
| Internal-Calibrated HFINTOSC Frequency tolerance (nominal 16.0 MHz) | HFOSC | -5 | 5 | % | -40°C ≤ TA ≤ +125°C | 393 | |
| Internal-Calibrated HFINTOSC Frequency tolerance (nominal 16.0 MHz) | HFOSC | -2 | 2 | % | 0°C ≤ TA ≤ +60°C, VDD ≥ 2.5V | 393 | |
| PLL Oscillator Frequency Range | F10 | 4 | 8 | MHz | 393 | ||
| PLL On-Chip VCO System Frequency | F11 | 16 | 32 | MHz | 393 | ||
| Internal LFINTOSC Frequency | OS09 | 31 | kHz | -40°C ≤ TA ≤ +125°C | 393 | ||
| Input-Capacitance Charging current, VCAP | 200 | µA | 388 | ||||
| Source/sink capability when VCAP charging complete | 0 | mA | 388 | ||||
| Power-on Reset Release Voltage, PIC16F1946/47 | VPOR | 1.6 | V | 380 | |||
| Power-on Reset Rearm Voltage, PIC16F1946/47 | VPORR | 1.5 | V | Device in Sleep mode | 380 |
CAD (KiCad official)
- Symbol:
PIC16F1947T-I - Footprint:
Package_QFP:TQFP-64_10x10mm_P0.5mm - 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
pic16f1947t-i-pt-etched.step/pic16f1947t-i-pt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f1947t-i-pt.step/pic16f1947t-i-pt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (459 pp, sha256
dea7e85cc0343ade, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PIC16F1947T-I
**Microchip Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)
PIC16F1947T-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE1 | bidirectional | General purpose I/O (Schmitt trigger input, CMOS output); also PWM output P2C (alternate location) and LCD analog input VLCD2. |
| 2 | RE0 | bidirectional | General purpose I/O (Schmitt trigger input, CMOS output); also PWM output P2D (alternate location) and LCD analog input VLCD1. |
| 3 | RG0 | bidirectional | General purpose I/O; also CCP3 capture/compare/PWM, PWM output P3A and LCD analog output SEG42. |
| 4 | RG1 | bidirectional | General purpose I/O; also A/D channel AN15, capacitive sensing input CPS15, EUSART2 asynchronous TX2 / synchronous CK2, comparator C3 output C3OUT and LCD analog output SEG43. |
| 5 | RG2 | bidirectional | General purpose I/O; also A/D channel AN14, capacitive sensing input CPS14, EUSART2 asynchronous RX2 / synchronous DT2, comparator C3 positive input C3IN+ and LCD analog output SEG44. |
| 6 | RG3 | bidirectional | General purpose I/O; also A/D channel AN13, capacitive sensing input CPS13, comparator C3 negative input C3IN0-, CCP4 capture/compare/PWM, PWM output P3D and LCD analog output SEG45. |
| 7 | RG5/MCLR/VPP | input | Input-only general purpose pin; with MCLRE set it is the Master Clear input with internal pull-up, and it also carries the high-voltage programming supply VPP. |
| 8 | RG4 | bidirectional | General purpose I/O; also A/D channel AN12, capacitive sensing input CPS12, comparator C3 negative input C3IN1-, CCP5 capture/compare/PWM, PWM output P1D and LCD analog output SEG26. |
| 9 | VSS | power_in | Ground reference. |
| 10 | VDD | power_in | Positive supply. |
| 11 | RF7 | bidirectional | General purpose I/O; also A/D channel AN5, capacitive sensing input CPS5, comparator negative inputs C1IN3-/C2IN3-/C3IN3-, SPI slave select input SS1 and LCD analog output SEG25. |
| 12 | RF6 | bidirectional | General purpose I/O; also A/D channel AN11, capacitive sensing input CPS11, comparator C1 positive input C1IN+ and LCD analog output SEG24. |
| 13 | RF5 | bidirectional | General purpose I/O; also A/D channel AN10, capacitive sensing input CPS10, comparator negative inputs C1IN1-/C2IN1-, DAC output DACOUT and LCD analog output SEG23. |
| 14 | RF4 | bidirectional | General purpose I/O; also A/D channel AN9, capacitive sensing input CPS9, comparator C2 positive input C2IN+ and LCD analog output SEG22. |
| 15 | RF3 | bidirectional | General purpose I/O; also A/D channel AN8, capacitive sensing input CPS8, comparator negative inputs C1IN2-/C2IN2-/C3IN2- and LCD analog output SEG21. |
| 16 | RF2 | bidirectional | General purpose I/O; also A/D channel AN7, capacitive sensing input CPS7, comparator C1 output C1OUT, SR Latch non-inverting output SRQ and LCD analog output SEG20. |
| 17 | RF1 | bidirectional | General purpose I/O; also A/D channel AN6, capacitive sensing input CPS6, comparator C2 output C2OUT, SR Latch inverting output SRNQ and LCD analog output SEG19. |
| 18 | RF0 | bidirectional | General purpose I/O; also A/D channel AN16, capacitive sensing input CPS16, comparator negative inputs C1IN0-/C2IN0-, LCD analog output SEG41, and the VCAP voltage regulator filter capacitor connection. |
| 19 | AVDD | power_in | Dedicated power connection for the on-board analog circuits, separate from VDD to reduce digital switching noise. |
| 20 | AVSS | power_in | Dedicated ground connection for the on-board analog circuits, separate from VSS to reduce digital switching noise. |
| 21 | RA3 | bidirectional | General purpose I/O (Schmitt trigger input, CMOS output); also A/D channel AN3, A/D voltage reference input VREF+, capacitive sensing input CPS3 and LCD analog output SEG35. |
| 22 | RA2 | bidirectional | General purpose I/O (Schmitt trigger input, CMOS output); also A/D channel AN2, A/D negative voltage reference input VREF-, capacitive sensing input CPS2 and LCD analog output SEG34. |
| 23 | RA1 | bidirectional | General purpose I/O (Schmitt trigger input, CMOS output); also A/D channel AN1, capacitive sensing input CPS1 and LCD analog output SEG18. |
| 24 | RA0 | bidirectional | General purpose I/O (Schmitt trigger input, CMOS output); also A/D channel AN0, capacitive sensing input CPS0 and LCD analog output SEG33. |
| 25 | VSS | power_in | Ground reference. |
| 26 | VDD | power_in | Positive supply. |
| 27 | RA5 | bidirectional | General purpose I/O; also A/D channel AN4, capacitive sensing input CPS4 and LCD analog output SEG15. |
| 28 | RA4 | bidirectional | General purpose I/O; also Timer0 clock input T0CKI (Schmitt trigger) and LCD analog output SEG14. |
| 29 | RC1 | bidirectional | General purpose I/O; also Timer1 oscillator input T1OSI, PWM output P2A and CCP2 capture/compare/PWM (default location, moved via APFCON) and LCD analog output SEG32. |
| 30 | RC0 | bidirectional | General purpose I/O (Schmitt trigger input, CMOS output); also Timer1 oscillator output T1OSO, Timer1 clock input T1CKI and LCD analog output SEG40. |
| 31 | RC6 | bidirectional | General purpose I/O; also EUSART1 asynchronous transmit TX1 / synchronous clock CK1 and LCD analog output SEG27. |
| 32 | RC7 | bidirectional | General purpose I/O; also EUSART1 asynchronous receive RX1 / synchronous data DT1 and LCD analog output SEG28. |
| 33 | RC2 | bidirectional | General purpose I/O; also CCP1 capture/compare/PWM, PWM output P1A and LCD analog output SEG13. |
| 34 | RC3 | bidirectional | General purpose I/O; also SPI1 clock SCK1, I2C1 clock SCL1 (open-drain) and LCD analog output SEG17. |
| 35 | RC4 | bidirectional | General purpose I/O; also SPI1 data input SDI1, I2C1 data SDA1 (open-drain) and LCD analog output SEG16. |
| 36 | RC5 | bidirectional | General purpose I/O; also SPI1 data output SDO1 and LCD analog output SEG12. |
| 37 | RB7 | bidirectional | General purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up; also ICSP data ICSPDAT, in-circuit debug data ICDDAT and LCD analog output SEG39. |
| 38 | VDD | power_in | Positive supply. |
| 39 | RA7 | bidirectional | General purpose I/O; also crystal/resonator input OSC1, external clock input CLKIN (EC mode) and LCD analog output SEG37. |
| 40 | RA6 | bidirectional | General purpose I/O; also crystal/resonator output OSC2 (LP, XT, HS modes), FOSC/4 output CLKOUT and LCD analog output SEG36. |
| 41 | VSS | power_in | Ground reference. |
| 42 | RB6 | bidirectional | General purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up; also ICSP clock ICSPCLK, in-circuit debug clock ICDCLK and LCD analog output SEG38. |
| 43 | RB5 | bidirectional | General purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up; also Timer1 gate input T1G (Schmitt trigger) and LCD analog output SEG29. |
| 44 | RB4 | bidirectional | General purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up; also LCD analog output SEG11. |
| 45 | RB3 | bidirectional | General purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up; also LCD analog output SEG10. |
| 46 | RB2 | bidirectional | General purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up; also LCD analog output SEG9. |
| 47 | RB1 | bidirectional | General purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up; also LCD analog output SEG8. |
| 48 | RB0 | bidirectional | General purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up; also external interrupt INT, SR Latch input SRI, ECCP auto-shutdown fault input FLT0 (Schmitt trigger) and LCD analog output SEG30. |
| 49 | RD7 | bidirectional | General purpose I/O (Schmitt trigger input, CMOS output); also SPI2 slave select input SS2 and LCD analog output SEG7. |
| 50 | RD6 | bidirectional | General purpose I/O; also SPI2 clock SCK2, I2C2 clock SCL2 (open-drain), PWM output P1B (alternate location) and LCD analog output SEG6. |
| 51 | RD5 | bidirectional | General purpose I/O; also SPI2 data input SDI2, I2C2 data SDA2 (open-drain), PWM output P1C (alternate location) and LCD analog output SEG5. |
| 52 | RD4 | bidirectional | General purpose I/O; also SPI2 data output SDO2, PWM output P3B (alternate location) and LCD analog output SEG4. |
| 53 | RD3 | bidirectional | General purpose I/O; also PWM output P3C (alternate location) and LCD analog output SEG3. |
| 54 | RD2 | bidirectional | General purpose I/O; also PWM output P2B (alternate location) and LCD analog output SEG2. |
| 55 | RD1 | bidirectional | General purpose I/O; also PWM output P2C (alternate location) and LCD analog output SEG1. |
| 56 | VSS | power_in | Ground reference. |
| 57 | VDD | power_in | Positive supply. |
| 58 | RD0 | bidirectional | General purpose I/O; also PWM output P2D (alternate location) and LCD analog output SEG0. |
| 59 | RE7 | bidirectional | General purpose I/O; also CCP2 capture/compare/PWM and PWM output P2A (alternate location, moved via APFCON) and LCD analog output SEG31. |
| 60 | RE6 | bidirectional | General purpose I/O; also PWM output P1B (default location) and LCD common driver COM3. |
| 61 | RE5 | bidirectional | General purpose I/O; also PWM output P1C (default location) and LCD common driver COM2. |
| 62 | RE4 | bidirectional | General purpose I/O; also PWM output P3B (default location) and LCD common driver COM1. |
| 63 | RE3 | bidirectional | General purpose I/O; also PWM output P3C (default location) and LCD common driver COM0. |
| 64 | RE2 | bidirectional | General purpose I/O; also PWM output P2B (default location) and LCD analog input VLCD3. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage on VDD with respect to VSS, PIC16F1946/47 | | -0.3 | | 6.5 | V | | 376 |
| Voltage on VCAP pin with respect to VSS | | -0.3 | | 4 | V | | 376 |
| Voltage on MCLR with respect to VSS | | -0.3 | | 9 | V | | 376 |
| Maximum current out of VSS pin | | | | 350 | mA | -40°C ≤ TA ≤ +85°C for industrial | 376 |
| Maximum current out of VSS pin | | | | 120 | mA | -40°C ≤ TA ≤ +125°C for extended | 376 |
| Maximum current into VDD pin | | | | 350 | mA | -40°C ≤ TA ≤ +85°C for industrial | 376 |
| Maximum current into VDD pin | | | | 120 | mA | -40°C ≤ TA ≤ +125°C for extended | 376 |
| Clamp current, IK | IK | | | 20 | mA | VPIN < 0 or VPIN > VDD | 376 |
| Ambient temperature under bias | TA | -40 | | 125 | °C | | 376 |
| Storage temperature | | -65 | | 150 | °C | | 376 |
| Operating Supply Voltage VDDMIN (FOSC ≤ 16 MHz), PIC16F1946/47 | VDD | 1.8 | | 5.5 | V | FOSC ≤ 16 MHz | 380 |
| Operating Supply Voltage VDDMIN (FOSC ≤ 32 MHz), PIC16F1946/47 | VDD | 2.5 | | 5.5 | V | FOSC ≤ 32 MHz (NOTE 2) | 380 |
| Operating Ambient Temperature Range, Industrial | TA | -40 | | 85 | °C | Industrial | 377 |
| RAM Data Retention Voltage, PIC16F1946/47 | VDR | 1.7 | | | V | Device in Sleep mode | 380 |
| Fixed Voltage Reference Voltage for ADC | VADFVR | -8 | | 6 | % | 1.024V, VDD ≥ 2.5V; 2.048V, VDD ≥ 2.5V; 4.096V, VDD ≥ 4.75V | 380 |
| Fixed Voltage Reference Voltage for Comparator and DAC | VCDAFVR | -11 | | 7 | % | 1.024V, VDD ≥ 2.5V; 2.048V, VDD ≥ 2.5V; 4.096V, VDD ≥ 4.75V | 380 |
| Fixed Voltage Reference Voltage for LCD Bias, Initial Accuracy | VLCDFVR | -11 | | 10 | % | 3.072V | 380 |
| VDD Rise Rate to ensure internal Power-on Reset signal | SVDD | 0.05 | | | V/ms | | 380 |
| Weak Pull-up Current | IPUR | 25 | 100 | 200 | µA | VDD = 3.3V, VPIN = VSS | 388 |
| Weak Pull-up Current | IPUR | 25 | 140 | 300 | µA | VDD = 5.0V, VPIN = VSS | 388 |
| Input Low Voltage, I/O PORT with TTL buffer | VIL | | | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 388 |
| Input Low Voltage, I/O PORT (max 0.15 × VDD) | VIL | | | 0.15 | VDD | 1.8V ≤ VDD ≤ 4.5V | 388 |
| Input Low Voltage, I/O PORT with Schmitt Trigger buffer (max 0.2 × VDD) | VIL | | | 0.2 | VDD | 2.0V ≤ VDD ≤ 5.5V | 388 |
| Input Low Voltage, I/O PORT with I2C levels (max 0.3 × VDD) | VIL | | | 0.3 | VDD | | 388 |
| Input Low Voltage, I/O PORT with SMBus levels | VIL | | | 0.8 | V | 2.7V ≤ VDD ≤ 5.5V | 388 |
| Input Low Voltage, MCLR, OSC1 (RC mode) (max 0.2 × VDD) | VIL | | | 0.2 | VDD | OSC1 (RC mode) | 388 |
| Input Low Voltage, OSC1 (HS mode) (max 0.3 × VDD) | VIL | | | 0.3 | VDD | OSC1 (HS mode) | 388 |
| Input High Voltage, I/O ports with TTL buffer | VIH | 2 | | | V | 4.5V ≤ VDD ≤ 5.5V | 388 |
| Input High Voltage, I/O ports with Schmitt Trigger buffer (min 0.8 × VDD) | VIH | 0.8 | | | VDD | 2.0V ≤ VDD ≤ 5.5V | 388 |
| Input High Voltage, I/O ports with I2C levels (min 0.7 × VDD) | VIH | 0.7 | | | VDD | | 388 |
| Input High Voltage, I/O ports with SMBus levels | VIH | 2.1 | | | V | 2.7V ≤ VDD ≤ 5.5V | 388 |
| Input High Voltage, MCLR (min 0.8 × VDD) | VIH | 0.8 | | | VDD | | 388 |
| Input High Voltage, OSC1 (HS mode) (min 0.7 × VDD) | VIH | 0.7 | | | VDD | OSC1 (HS mode) | 388 |
| Input High Voltage, OSC1 (RC mode) (min 0.9 × VDD) | VIH | 0.9 | | | VDD | VDD ≥ 2.0V (Note 1) | 388 |
| Output Low Voltage, I/O ports | VOL | | | 0.6 | V | IOL = 8mA, VDD = 5V; IOL = 6mA, VDD = 3.3V; IOL = 1.8mA, VDD = 1.8V | 388 |
| Capacitive Loading, OSC2 pin | COSC2 | | | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 388 |
| Capacitive Loading, All I/O pins | CIO | | | 50 | pF | | 388 |
| Byte Endurance, Data EEPROM | ED | 100 | | | K E/W | -40°C to +85°C | 389 |
| Erase/Write Cycle Time, Data EEPROM | TDEW | | 4 | 5 | ms | | 389 |
| Voltage on MCLR/VPP pin (programming) | VIHH | 8 | | 9 | V | Required only if single-supply programming is disabled (Note 3, Note 4) | 389 |
| Supply Current during Programming | IDDP | | | 10 | mA | | 389 |
| Cell Endurance, Program Flash Memory | EP | 10 | | | K E/W | -40°C to +85°C (Note 1) | 389 |
| Self-timed Write Cycle Time, Program Flash | TIW | | 2 | 2.5 | ms | | 389 |
| Thermal Resistance Junction to Ambient, 64-pin TQFP | θJA | | 48.3 | | C/W | 64-pin TQFP package | 390 |
| Thermal Resistance Junction to Case, 64-pin TQFP | θJC | | 26.1 | | C/W | 64-pin TQFP package | 390 |
| Maximum Junction Temperature | TJMAX | | | 150 | °C | | 390 |
| External CLKIN Frequency, EC Oscillator mode (high) | FOSC | | | 20 | MHz | EC Oscillator mode (high) | 392 |
| Oscillator Frequency, HS Oscillator mode | FOSC | | | 20 | MHz | HS Oscillator mode, VDD > 2.7V | 392 |
| Internal-Calibrated HFINTOSC Frequency tolerance (nominal 16.0 MHz) | HFOSC | -5 | | 5 | % | -40°C ≤ TA ≤ +125°C | 393 |
| Internal-Calibrated HFINTOSC Frequency tolerance (nominal 16.0 MHz) | HFOSC | -2 | | 2 | % | 0°C ≤ TA ≤ +60°C, VDD ≥ 2.5V | 393 |
| PLL Oscillator Frequency Range | F10 | 4 | | 8 | MHz | | 393 |
| PLL On-Chip VCO System Frequency | F11 | 16 | | 32 | MHz | | 393 |
| Internal LFINTOSC Frequency | OS09 | | 31 | | kHz | -40°C ≤ TA ≤ +125°C | 393 |
| Input-Capacitance Charging current, VCAP | | | 200 | | µA | | 388 |
| Source/sink capability when VCAP charging complete | | | 0 | | mA | | 388 |
| Power-on Reset Release Voltage, PIC16F1946/47 | VPOR | | 1.6 | | V | | 380 |
| Power-on Reset Rearm Voltage, PIC16F1946/47 | VPORR | | 1.5 | | V | Device in Sleep mode | 380 |
## CAD (KiCad official)
- Symbol: `PIC16F1947T-I`
- Footprint: `Package_QFP:TQFP-64_10x10mm_P0.5mm`
- 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files: `pic16f1947t-i-pt-etched.step` / `pic16f1947t-i-pt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic16f1947t-i-pt.step` / `pic16f1947t-i-pt.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/40001414E.pdf) (459 pp, sha256 `dea7e85cc0343ade`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic16f1947t-i-pt-datasheet.pdf)