Generated by kicad-footprint-generator · KiCad file format 20260206
PIC16F1938-I/SS
Microchip Tech · MICROCHIP · SSOP-28-208mil
PIC16F1938-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE3/MCLR/VPP | input | RE3 is a general-purpose input only; when MCLR is enabled it is the Master Clear input with internal weak pull-up, and VPP is the high-voltage programming pin. |
| 2 | RA0 | bidirectional | General-purpose I/O with TTL input and CMOS output, also AN0, C12IN0-, APFCON-selectable C2OUT/SRNQ/SS, VCAP (PIC16F1938 only) and SEG12 LCD analog output. |
| 3 | RA1 | bidirectional | General-purpose I/O with TTL input and CMOS output, also AN1 A/D channel 1, C12IN1- comparator negative input, and SEG7 LCD analog output. |
| 4 | RA2 | bidirectional | General-purpose I/O with TTL input and CMOS output, also AN2, C2IN+, VREF- A/D negative reference input, DACOUT voltage reference output, and COM2 LCD analog output. |
| 5 | RA3 | bidirectional | General-purpose I/O with TTL input and CMOS output, also AN3, C1IN+, VREF+ A/D positive reference input, COM3 (PIC16(L)F1938 only), and SEG15 LCD analog output. |
| 6 | RA4 | bidirectional | General-purpose I/O with TTL input and CMOS output, also C1OUT comparator output, CPS6 capacitive sensing input, T0CKI Timer0 clock input, SRQ SR Latch output, CCP5, and SEG4 LCD analog output. |
| 7 | RA5 | bidirectional | General-purpose I/O with TTL input and CMOS output, also AN4, C2OUT, CPS7, APFCON-selectable SRNQ/SS, VCAP (PIC16F1938 only) and SEG5 LCD analog output. |
| 8 | VSS | power_in | Ground reference. |
| 9 | RA7 | bidirectional | General-purpose I/O with TTL input and CMOS output, also OSC1 crystal/resonator input (LP, XT, HS), CLKIN external clock input (EC mode), and SEG2 LCD analog output. |
| 10 | RA6 | bidirectional | General-purpose I/O with TTL input and CMOS output, also OSC2 crystal/resonator output (LP, XT, HS), CLKOUT FOSC/4 output, VCAP (PIC16F1938 only), and SEG1 LCD analog output. |
| 11 | RC0 | bidirectional | General-purpose I/O with Schmitt trigger input and CMOS output, also T1OSO Timer1 oscillator connection, T1CKI Timer1 clock input, and P2B PWM output. |
| 12 | RC1 | bidirectional | General-purpose I/O with Schmitt trigger input and CMOS output, also T1OSI Timer1 oscillator connection, CCP2, and P2A PWM output. |
| 13 | RC2 | bidirectional | General-purpose I/O with Schmitt trigger input and CMOS output, also CCP1 capture/compare/PWM, P1A PWM output, and SEG3 LCD analog output. |
| 14 | RC3 | bidirectional | General-purpose I/O with Schmitt trigger input and CMOS output, also SCK SPI clock, SCL I2C clock (open drain), and SEG6 LCD analog output. |
| 15 | RC4 | bidirectional | General-purpose I/O with Schmitt trigger input and CMOS output, also SDI SPI data input, SDA I2C data (open drain), T1G Timer1 gate input, and SEG11 LCD analog output. |
| 16 | RC5 | bidirectional | General-purpose I/O with Schmitt trigger input and CMOS output, also SDO SPI data output and SEG10 LCD analog output. |
| 17 | RC6 | bidirectional | General-purpose I/O with Schmitt trigger input and CMOS output, also TX EUSART asynchronous transmit, CK EUSART synchronous clock, CCP3/P3A PWM output, and SEG9 LCD analog output. |
| 18 | RC7 | bidirectional | General-purpose I/O with Schmitt trigger input and CMOS output, also RX EUSART asynchronous receive, DT EUSART synchronous data, P3B PWM output, and SEG8 LCD analog output. |
| 19 | VSS | power_in | Ground reference. |
| 20 | VDD | power_in | Positive supply; the PIC16F193X operates from 1.8V to 5.5V per the datasheet overview. |
| 21 | RB0 | bidirectional | General-purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up, also AN12, CPS0, CCP4, SRI, external interrupt INT, and SEG0 LCD analog output. |
| 22 | RB1 | bidirectional | General-purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up, also AN10, C12IN3-, CPS1, P1C PWM output, and VLCD1 LCD analog input. |
| 23 | RB2 | bidirectional | General-purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up, also AN8, CPS2, P1B PWM output, and VLCD2 LCD analog input. |
| 24 | RB3 | bidirectional | General-purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up, also AN9, C12IN2-, CPS3, CCP2/P2A (APFCON selectable), and VLCD3 LCD analog input. |
| 25 | RB4 | bidirectional | General-purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up, also AN11, CPS4, P1D PWM output, and COM0 LCD analog output. |
| 26 | RB5 | bidirectional | General-purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up, also AN13, CPS5, P2B PWM output, CCP3/P3A, T1G Timer1 gate input, and COM1 LCD analog output. |
| 27 | RB6 | bidirectional | General-purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up, also ICSPCLK serial programming clock, ICDCLK in-circuit debug clock, and SEG14 LCD analog output. |
| 28 | RB7 | bidirectional | General-purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up, also ICSPDAT programming data I/O, ICDDAT in-circuit debug data I/O, and SEG13 LCD analog output. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Embedded Processors & Controllers |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD Supply Voltage (FOSC ≤ 16 MHz) | VDD | 1.8 | 5.5 | V | PIC16F1938/39, FOSC ≤ 16 MHz | 367 | |
| VDD Supply Voltage (FOSC ≤ 32 MHz) | VDD | 2.5 | 5.5 | V | PIC16F1938/39, FOSC ≤ 32 MHz (PLL required) | 367 | |
| Operating temperature (industrial) | TA | -40 | 85 | °C | Industrial grade (-I) | 367 | |
| Ambient temperature under bias | -40 | 125 | °C | 364 | |||
| Storage temperature | -65 | 150 | °C | 364 | |||
| Voltage on VDD with respect to VSS (PIC16F1938/39) | VDD | -0.3 | 6.5 | V | PIC16F1938/39 | 364 | |
| Voltage on VCAP pin with respect to VSS (PIC16F1938/39) | VCAP | -0.3 | 4 | V | PIC16F1938/39 | 364 | |
| Voltage on MCLR with respect to VSS | -0.3 | 9 | V | 364 | |||
| Maximum current out of VSS pin | 255 | mA | -40°C ≤ TA ≤ +85°C for industrial | 364 | |||
| Maximum current into VDD pin | 170 | mA | -40°C ≤ TA ≤ +85°C for industrial | 364 | |||
| Clamp current | IK | 20 | mA | VPIN < 0 or VPIN > VDD | 364 | ||
| Data RAM retention voltage | VDR | 1.7 | V | PIC16F1938/39, device in Sleep mode | 367 | ||
| VDD rise rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | See Section 6.1 Power-on Reset | 367 | ||
| Fixed Voltage Reference voltage for ADC | VADFVR | -8 | 6 | % | 1.024V, VDD ≥ 2.5V; 2.048V, VDD ≥ 2.5V; 4.096V, VDD ≥ 4.75V | 367 | |
| Fixed Voltage Reference voltage for Comparator and DAC | VCDAFVR | -11 | 7 | % | 1.024V, VDD ≥ 2.5V; 2.048V, VDD ≥ 2.5V; 4.096V, VDD ≥ 4.75V | 367 | |
| Fixed Voltage Reference voltage for LCD Bias, initial accuracy | VLCDFVR | -11 | 10 | % | 3.072V, VDD ≥ 3.6V | 367 | |
| Input low voltage, I/O port with TTL buffer | VIL | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 374 | ||
| Input low voltage, I/O port with SMBus levels | VIL | 0.8 | V | 2.7V ≤ VDD ≤ 5.5V | 374 | ||
| Input high voltage, I/O port with TTL buffer | VIH | 2 | V | 4.5V ≤ VDD ≤ 5.5V | 374 | ||
| Input high voltage, I/O port with SMBus levels | VIH | 2.1 | V | 2.7V ≤ VDD ≤ 5.5V | 374 | ||
| Input leakage current, MCLR pin | IIL | -200 | 200 | nA | VSS ≤ VPIN ≤ VDD @85°C | 374 | |
| Weak pull-up current | IPUR | 25 | 100 | 200 | µA | VDD = 3.3V, VPIN = VSS | 374 |
| Weak pull-up current | IPUR | 25 | 140 | 300 | µA | VDD = 5.0V, VPIN = VSS | 374 |
| Output low voltage, I/O ports | VOL | 0.6 | V | IOL = 8mA, VDD = 5V; IOL = 6mA, VDD = 3.3V; IOL = 1.8mA, VDD = 1.8V | 374 | ||
| Capacitive loading, OSC2 pin | COSC2 | 15 | pF | XT, HS and LP modes when external clock is used to drive OSC1 | 375 | ||
| Capacitive loading, all I/O pins | CIO | 50 | pF | All I/O pins | 375 | ||
| Voltage on MCLR/VPP/RE3 pin during programming | VIHH | 8 | 9 | V | Note 3, Note 4 | 376 | |
| Supply current during programming | IDDP | 10 | mA | 376 | |||
| VDD for bulk erase | VDD | 2.7 | V | 376 | |||
| Data EEPROM byte endurance | ED | 100 | K E/W | -40C to +85C | 376 | ||
| Program Flash cell endurance | EP | 10 | K E/W | -40C to +85C, self-write and block erase | 376 | ||
| Erase/write cycle time (data EEPROM) | TDEW | 4 | 5 | ms | 376 | ||
| Self-timed write cycle time (program Flash) | TIW | 2 | 2.5 | ms | 376 | ||
| Base power-down current (IPD), WDT, BOR, FVR, T1OSC disabled | IPD | 15 | 35 | µA | VDD = 1.8V; all peripherals inactive; max at +85°C | 372 | |
| Base power-down current (IPD), WDT, BOR, FVR, T1OSC disabled | IPD | 18 | 40 | µA | VDD = 3.0V; all peripherals inactive; max at +85°C | 372 | |
| Base power-down current (IPD), WDT, BOR, FVR, T1OSC disabled | IPD | 19 | 45 | µA | VDD = 5.0V; all peripherals inactive; max at +85°C | 372 | |
| Supply current (IDD), LP oscillator | IDD | 26 | 45 | µA | VDD = 1.8V; FOSC = 32 kHz LP oscillator mode; -40°C ≤ TA ≤ +85°C | 369 | |
| Supply current (IDD), LP oscillator | IDD | 32 | 50 | µA | VDD = 3.0V; FOSC = 32 kHz LP oscillator mode; -40°C ≤ TA ≤ +85°C | 369 | |
| Supply current (IDD), LP oscillator | IDD | 35 | 55 | µA | VDD = 5.0V; FOSC = 32 kHz LP oscillator mode; -40°C ≤ TA ≤ +85°C | 369 | |
| Supply current (IDD), HFINTOSC | IDD | 0.7 | 0.9 | mA | VDD = 1.8V; FOSC = 8 MHz HFINTOSC mode | 371 | |
| Supply current (IDD), HFINTOSC | IDD | 1 | 1.4 | mA | VDD = 3.0V; FOSC = 8 MHz HFINTOSC mode | 371 | |
| Supply current (IDD), HFINTOSC | IDD | 1.2 | 1.5 | mA | VDD = 5.0V; FOSC = 8 MHz HFINTOSC mode | 371 | |
| Supply current (IDD), HFINTOSC | IDD | 3 | 3.9 | mA | VDD = 3.0V; FOSC = 32 MHz HFINTOSC mode | 371 | |
| Supply current (IDD), HFINTOSC | IDD | 3.3 | 4.1 | mA | VDD = 5.0V; FOSC = 32 MHz HFINTOSC mode | 371 | |
| Thermal resistance junction to ambient, SSOP package | θJA | 71 | C/W | 28-pin SSOP package | 377 | ||
| Thermal resistance junction to case, SSOP package | θJC | 24 | C/W | 28-pin SSOP package | 377 | ||
| Maximum junction temperature | TJMAX | 150 | C | 377 |
CAD (KiCad official)
- Symbol:
PIC16F1938-I - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
pic16f1938-i-etched.step/pic16f1938-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f1938-i.step/pic16f1938-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (466 pp, sha256
ec1a6baca1a4d13c, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC16F1938-I/SS. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC16F1938-I/ML
- PIC16F1938-I/MV
- PIC16F1938-I/SO