main
Ray
Publish 0.1.1
d3bb8a8
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299
{
"schema_version": 1,
"type": "component",
"slug": "pic16f1933-i-ss",
"title": "PIC16F1933-I/SS",
"brief": "Microchip Tech Microcontrollers (MCU/MPU/SOC), SSOP-28-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.1",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"embedded processors & controllers",
"pic16f1933-i",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "PIC16F1933-I/SS",
"manufacturer": "Microchip Tech",
"package": "SSOP-28-208mil",
"pin_count": 28,
"category": "Embedded Processors & Controllers",
"subcategory": "Microcontrollers (MCU/MPU/SOC)",
"datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588882180252839936",
"parts": {
"symbol": "pic16f1933-i.kicad_sym",
"footprint": "pic16f1933-i.kicad_mod",
"model_3d": "pic16f1933-i-ss-hero.glb",
"model_3d_plain": "pic16f1933-i.glb",
"model_3d_step": "pic16f1933-i-etched.step",
"model_3d_step_plain": "pic16f1933-i.step",
"lbr": "pic16f1933-i.lbr"
},
"distributor_links": {
"lcsc": "C88376"
},
"pins": [
{
"number": "1",
"name": "VPP/MCLR/RE3",
"type": "input",
"description": "Active-low master-clear reset input multiplexed with RE3 input-only I/O and VPP programming-voltage input; internal weak pull-up selectable in software; RE3 is the device's sole input-only pin per the 25 I/O count on page 2."
},
{
"number": "2",
"name": "RA0",
"type": "bidirectional",
"description": "Bidirectional general-purpose I/O pin RA0 with high source/sink current sufficient to drive LEDs directly, programmable weak pull-up, and interrupt-on-change; multiplexed with a 10-bit ADC analog input channel and mTouch capacitive-sensing channel."
},
{
"number": "3",
"name": "RA1",
"type": "bidirectional",
"description": "Bidirectional general-purpose I/O pin RA1 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with a 10-bit ADC analog input channel and mTouch capacitive-sensing channel."
},
{
"number": "4",
"name": "RA2",
"type": "bidirectional",
"description": "Bidirectional general-purpose I/O pin RA2 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with ADC analog input, DAC output (DAC1OUT), and negative voltage reference (VREF−)."
},
{
"number": "5",
"name": "RA3",
"type": "bidirectional",
"description": "Bidirectional general-purpose I/O pin RA3 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with ADC analog input and positive voltage reference (VREF+); reference options include 1.024 V, 2.048 V, and 4.096 V per FVR module."
},
{
"number": "6",
"name": "RA4",
"type": "bidirectional",
"description": "Bidirectional general-purpose I/O pin RA4 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with Timer0 external clock input (T0CKI), Comparator 1 output (C1OUT), and SR latch output."
},
{
"number": "7",
"name": "RA5",
"type": "bidirectional",
"description": "Bidirectional general-purpose I/O pin RA5 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with ADC analog input, Comparator 2 output (C2OUT), and Timer1 clock input (T1CKI)."
},
{
"number": "8",
"name": "VSS",
"type": "power_in",
"description": "Ground reference for logic and I/O; first of two VSS pins on the 28-pin SSOP package."
},
{
"number": "9",
"name": "RA7",
"type": "bidirectional",
"description": "Bidirectional general-purpose I/O pin RA7 with high source/sink current; multiplexed with external oscillator input (OSC1/CLKIN) accepting DC to 32 MHz per device clock specification on page 1."
},
{
"number": "10",
"name": "RA6",
"type": "bidirectional",
"description": "Bidirectional general-purpose I/O pin RA6 with high source/sink current; multiplexed with oscillator output (OSC2/CLKOUT) for crystal feedback or clock output."
},
{
"number": "11",
"name": "RC0",
"type": "bidirectional",
"description": "Bidirectional general-purpose I/O pin RC0 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with the Timer1 low-power 32 kHz oscillator output (T1OSO/SOSCO) and Timer1 clock input."
},
{
"number": "12",
"name": "RC1",
"type": "bidirectional",
"description": "Bidirectional general-purpose I/O pin RC1 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with the Timer1 32 kHz oscillator input (T1OSI/SOSCI)."
},
{
"number": "13",
"name": "RC2",
"type": "bidirectional",
"description": "Bidirectional general-purpose I/O pin RC2 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with CCP1 capture/compare/PWM (16-bit capture, max 125 ns resolution; 10-bit PWM up to 31.25 kHz)."
},
{
"number": "14",
"name": "RC3",
"type": "bidirectional",
"description": "Bidirectional general-purpose I/O pin RC3 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with MSSP serial clock as SPI clock (SCK) or I2C clock (SCL) with 7-bit address masking and SMBus/PMBus compatibility."
},
{
"number": "15",
"name": "RC4",
"type": "bidirectional",
"description": "Bidirectional general-purpose I/O pin RC4 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with MSSP SPI data input (SDI) and I2C data (SDA); supports auto wake-up on start bit."
},
{
"number": "16",
"name": "RC5",
"type": "bidirectional",
"description": "Bidirectional general-purpose I/O pin RC5 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with MSSP SPI data output (SDO) and an ECCP PWM output channel."
},
{
"number": "17",
"name": "RC6",
"type": "bidirectional",
"description": "Bidirectional general-purpose I/O pin RC6 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with EUSART transmit (TX/CK); EUSART is compatible with RS-232, RS-485, and LIN with automatic baud-rate detection."
},
{
"number": "18",
"name": "RC7",
"type": "bidirectional",
"description": "Bidirectional general-purpose I/O pin RC7 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with EUSART receive (RX/DT); EUSART is compatible with RS-232, RS-485, and LIN."
},
{
"number": "19",
"name": "VSS",
"type": "power_in",
"description": "Ground reference for logic and I/O; second VSS pin on the 28-pin SSOP package."
},
{
"number": "20",
"name": "VDD",
"type": "power_in",
"description": "Positive power supply; 1.8 V to 5.5 V for PIC16F1933 or 1.8 V to 3.6 V for PIC16LF1933 per page 1."
},
{
"number": "21",
"name": "RB0",
"type": "bidirectional",
"description": "Bidirectional general-purpose I/O pin RB0 with high source/sink current to drive LEDs, individual programmable weak pull-up, and interrupt-on-change; multiplexed with external interrupt (INT) and an ECCP/CCP PWM channel."
},
{
"number": "22",
"name": "RB1",
"type": "bidirectional",
"description": "Bidirectional general-purpose I/O pin RB1 with high source/sink current, individual programmable weak pull-up, and interrupt-on-change; multiplexed with ECCP PWM output and an ADC analog input channel."
},
{
"number": "23",
"name": "RB2",
"type": "bidirectional",
"description": "Bidirectional general-purpose I/O pin RB2 with high source/sink current, individual programmable weak pull-up, and interrupt-on-change; multiplexed with an ECCP PWM half-bridge output and an ADC analog input channel."
},
{
"number": "24",
"name": "RB3",
"type": "bidirectional",
"description": "Bidirectional general-purpose I/O pin RB3 with high source/sink current, individual programmable weak pull-up, and interrupt-on-change; multiplexed with an ECCP full-bridge PWM output and an ADC analog input channel."
},
{
"number": "25",
"name": "RB4",
"type": "bidirectional",
"description": "Bidirectional general-purpose I/O pin RB4 with high source/sink current, individual programmable weak pull-up, and interrupt-on-change; multiplexed with an ECCP PWM output and SR latch output (SRQ)."
},
{
"number": "26",
"name": "RB5",
"type": "bidirectional",
"description": "Bidirectional general-purpose I/O pin RB5 with high source/sink current, individual programmable weak pull-up, and interrupt-on-change; multiplexed with a CCP/ECCP PWM output, Timer1 gate input (T1G), and SR latch enable (SRQE)."
},
{
"number": "27",
"name": "RB6/ICSPCLK",
"type": "bidirectional",
"description": "Bidirectional general-purpose I/O pin RB6 with individual programmable weak pull-up and interrupt-on-change; serves as In-Circuit Serial Programming clock (ICSPCLK) during ICSP programming."
},
{
"number": "28",
"name": "RB7/ICSPDAT",
"type": "bidirectional",
"description": "Bidirectional general-purpose I/O pin RB7 with individual programmable weak pull-up and interrupt-on-change; serves as In-Circuit Serial Programming data (ICSPDAT) during ICSP programming."
}
],
"provenance": {
"extractor": "extract_pins 0.2",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.2",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-4-6",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: LCD controller function assignment: Datasheet specifies integrated LCD controller with up to 96 segm; Input-only pin identification: Datasheet states one pin is input-only (page 2) but does not identify; ADC channel assignment: Datasheet mentions 11 ADC channels available but does not map specific chann"
],
"pages_sent": 6,
"cost_usd": 1.0981,
"at": "2026-09-22T11:14:55"
},
"datasheet": {
"url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588882180252839936",
"pages": 464,
"sha256": "bb8a1b7608e25714",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 28,
"described": 28,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"family": {
"base": "PIC16F1933-I",
"siblings": [
"PIC16F1933-I/SO"
],
"old_slug": "pic16f1933-i",
"note": "renamed from the cut-base slug to the part it was built from (slug collision split, 2026-11-11)"
}
},
"metadata": {
"specs": {
"Manufacturer": "Microchip Tech",
"Package": "SSOP-28-208mil",
"Category": "Embedded Processors & Controllers",
"Pins": "28"
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"pic16f1933-i"
],
"discovery_pitch": "PIC16F1933-I (Microchip Tech) component page with datasheet-verified CAD.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"pic16f1933-i.kicad_sym",
"pic16f1933-i.kicad_mod",
"pic16f1933-i.glb",
"pic16f1933-i.step",
"pic16f1933-i.lbr",
"docs/hero.png",
"docs/pic16f1933-i-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"pic16f1933-i-etched.glb",
"pic16f1933-i-etched.step",
"pic16f1933-i-ss-hero.glb",
"pic16f1933-i-ss-hero.overlay.json"
],
"visibility": "public",
"updated_at": "2026-09-25T04:22:24.704Z",
"description": "Microchip Tech Microcontrollers (MCU/MPU/SOC), SSOP-28-208mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"org": "adom"
}