Generated by kicad-footprint-generator · KiCad file format 20260206
PIC16F1933-E
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil
PIC16F1933-E from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE3/MCLR/VPP | input | General purpose input; MCLR is the Master Clear input with internal pull-up and VPP is the programming voltage. |
| 2 | RA0 | bidirectional | General purpose I/O, also A/D input AN0, comparator inputs and outputs, SR latch SRNQ, SS, VCAP filter capacitor and LCD output SEG12. |
| 3 | RA1 | bidirectional | General purpose I/O, also A/D input AN1, comparator negative input C12IN1- and LCD output SEG7. |
| 4 | RA2 | bidirectional | General purpose I/O, also A/D input AN2, A/D negative reference VREF-, comparator input C2IN+, DAC output DACOUT and LCD output COM2. |
| 5 | RA3 | bidirectional | General purpose I/O, also A/D input AN3, A/D positive reference VREF+, comparator input C1IN+ and LCD outputs COM3 and SEG15. |
| 6 | RA4 | bidirectional | General purpose I/O, also comparator output C1OUT, capacitive sensing input CPS6, Timer0 clock input T0CKI, SR latch SRQ, CCP5 and LCD output SEG4. |
| 7 | RA5 | bidirectional | General purpose I/O, also A/D input AN4, comparator output C2OUT, capacitive sensing input CPS7, SR latch SRNQ, SS, VCAP filter capacitor and LCD output SEG5. |
| 8 | VSS | power_in | Ground reference. |
| 9 | RA7 | bidirectional | General purpose I/O, also oscillator input OSC1/CLKIN (external clock input in EC mode) and LCD output SEG2. |
| 10 | RA6 | bidirectional | General purpose I/O, also oscillator output OSC2 (crystal/resonator), CLKOUT (FOSC/4 output), VCAP filter capacitor and LCD output SEG1. |
| 11 | RC0 | bidirectional | General purpose I/O, also Timer1 oscillator output T1OSO, Timer1 clock input T1CKI and PWM output P2B. |
| 12 | RC1 | bidirectional | General purpose I/O, also Timer1 oscillator input T1OSI, CCP2 and PWM output P2A. |
| 13 | RC2 | bidirectional | General purpose I/O, also CCP1 capture/compare/PWM, PWM output P1A and LCD output SEG3. |
| 14 | RC3 | bidirectional | General purpose I/O, also MSSP SPI clock SCK, I2C clock SCL and LCD output SEG6. |
| 15 | RC4 | bidirectional | General purpose I/O, also MSSP SPI data input SDI, I2C data SDA, Timer1 gate input T1G and LCD output SEG11. |
| 16 | RC5 | bidirectional | General purpose I/O, also MSSP SPI data output SDO and LCD output SEG10. |
| 17 | RC6 | bidirectional | General purpose I/O, also EUSART asynchronous transmit TX, synchronous clock CK, CCP3, PWM output P3A and LCD output SEG9. |
| 18 | RC7 | bidirectional | General purpose I/O, also EUSART asynchronous receive RX, synchronous data DT, PWM output P3B and LCD output SEG8. |
| 19 | VSS | power_in | Ground reference. |
| 20 | VDD | power_in | Positive supply. |
| 21 | RB0 | bidirectional | General purpose I/O with individually controlled interrupt-on-change and pull-up, also A/D input AN12, CCP4, SR latch input SRI, external interrupt INT and LCD output SEG0. |
| 22 | RB1 | bidirectional | General purpose I/O with individually controlled interrupt-on-change and pull-up, also A/D input AN10, comparator input C12IN3-, PWM output P1C and LCD analog input VLCD1. |
| 23 | RB2 | bidirectional | General purpose I/O with individually controlled interrupt-on-change and pull-up, also A/D input AN8, PWM output P1B and LCD analog input VLCD2. |
| 24 | RB3 | bidirectional | General purpose I/O with individually controlled interrupt-on-change and pull-up, also A/D input AN9, comparator input C12IN2-, CCP2/P2A and LCD analog input VLCD3. |
| 25 | RB4 | bidirectional | General purpose I/O with individually controlled interrupt-on-change and pull-up, also A/D input AN11, PWM output P1D and LCD output COM0. |
| 26 | RB5 | bidirectional | General purpose I/O with individually controlled interrupt-on-change and pull-up, also A/D input AN13, PWM outputs P2B and P3A, CCP3, Timer1 gate input T1G and LCD output COM1. |
| 27 | RB6 | bidirectional | General purpose I/O with individually controlled interrupt-on-change and pull-up, also ICSP serial programming clock ICSPCLK, in-circuit debug clock ICDCLK and LCD output SEG14. |
| 28 | RB7 | bidirectional | General purpose I/O with individually controlled interrupt-on-change and pull-up, also ICSP serial programming data ICSPDAT, in-circuit debug data ICDDAT and LCD output SEG13. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 125 | °C | 365 | |||
| Storage temperature | -65 | 150 | °C | 365 | |||
| Voltage on VDD with respect to VSS, PIC16F1933 | VDD | -0.3 | 6.5 | V | with respect to VSS, PIC16F1933 | 365 | |
| Voltage on VCAP pin with respect to VSS, PIC16F1933 | -0.3 | 4 | V | with respect to VSS, PIC16F1933 | 365 | ||
| Voltage on MCLR with respect to VSS | -0.3 | 9 | V | with respect to VSS | 365 | ||
| Voltage on all other pins with respect to VSS | -0.3 | V | with respect to VSS; upper limit printed as VDD + 0.3V | 365 | |||
| Maximum current out of VSS pin | 105 | mA | -40°C ≤ TA ≤ +125°C for extended | 365 | |||
| Maximum current into VDD pin | 70 | mA | -40°C ≤ TA ≤ +125°C for extended | 365 | |||
| Clamp current | IK | 20 | mA | VPIN < 0 or VPIN > VDD | 365 | ||
| Maximum output current sunk by any I/O pin | 25 | mA | 365 | ||||
| Maximum output current sourced by any I/O pin | 25 | mA | 365 | ||||
| Supply Voltage (VDDMIN, VDDMAX) | VDD | 1.8 | 5.5 | V | FOSC ≤ 16 MHz | 368 | |
| Supply Voltage (VDDMIN, VDDMAX) | VDD | 2.5 | 5.5 | V | FOSC ≤ 32 MHz (Note 2) | 368 | |
| RAM Data Retention Voltage | VDR | 1.7 | V | Device in Sleep mode | 368 | ||
| Fixed Voltage Reference Voltage for ADC | VADFVR | -8 | 6 | % | 1.024V, VDD ≥ 2.5V | 368 | |
| Fixed Voltage Reference Voltage for Comparator and DAC | VCDAFVR | -11 | 7 | % | 1.024V, VDD ≥ 2.5V | 368 | |
| Fixed Voltage Reference Voltage for LCD Bias | VLCDFVR | -11 | 10 | % | 3.072V, VDD ≥ 3.6V | 368 | |
| VDD Rise Rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | See Section 6.1 Power-On Reset (POR) for details | 368 | ||
| Supply Current (IDD) LP Oscillator mode | IDD | 10 | 18 | µA | VDD = 1.8V; FOSC = 32 kHz; LP Oscillator mode (Note 4); -40°C ≤ TA ≤ +125°C | 370 | |
| Supply Current (IDD) LP Oscillator mode | IDD | 15 | 20 | µA | VDD = 3.0V; FOSC = 32 kHz; LP Oscillator mode (Note 4); -40°C ≤ TA ≤ +125°C | 370 | |
| Supply Current (IDD) XT Oscillator mode | IDD | 120 | 160 | µA | VDD = 1.8V; FOSC = 1 MHz | 370 | |
| Supply Current (IDD) XT Oscillator mode | IDD | 200 | 255 | µA | VDD = 3.0V; XT Oscillator mode | 370 | |
| Supply Current (IDD) XT Oscillator mode | IDD | 325 | 370 | µA | VDD = 1.8V; FOSC = 4 MHz | 370 | |
| Supply Current (IDD) XT Oscillator mode | IDD | 600 | 710 | µA | VDD = 3.0V; XT Oscillator mode | 370 | |
| Supply Current (IDD) EC Oscillator Medium-Power mode | IDD | 300 | 340 | µA | VDD = 1.8V; FOSC = 4 MHz; EC Oscillator mode | 371 | |
| Supply Current (IDD) EC Oscillator Medium-Power mode | IDD | 400 | 650 | µA | VDD = 3.0V; FOSC = 4 MHz; EC Oscillator mode | 371 | |
| Supply Current (IDD) EC Oscillator High-Power mode | IDD | 3.7 | 4.2 | mA | VDD = 3.0V; FOSC = 32 MHz; EC Oscillator High-Power mode | 371 | |
| Supply Current (IDD) EC Oscillator High-Power mode | IDD | 4.2 | 5.2 | mA | VDD = 3.6V; EC Oscillator High-Power mode | 371 | |
| Supply Current (IDD) LFINTOSC mode | IDD | 4 | 10 | µA | VDD = 1.8V; FOSC = 32 kHz; LFINTOSC mode, 85°C | 371 | |
| Supply Current (IDD) LFINTOSC mode | IDD | 7 | 13 | µA | VDD = 3.0V; LFINTOSC mode, 85°C | 371 | |
| Supply Current (IDD) HFINTOSC mode | IDD | 1.3 | 1.7 | mA | VDD = 1.8V; FOSC = 16 MHz; HFINTOSC mode | 372 | |
| Supply Current (IDD) HFINTOSC mode | IDD | 2.2 | 2.6 | mA | VDD = 3.0V; HFINTOSC mode | 372 | |
| Supply Current (IDD) HFINTOSC mode | IDD | 3.9 | 4.5 | mA | VDD = 3.0V; FOSC = 32 MHz; HFINTOSC mode | 372 | |
| Supply Current (IDD) HFINTOSC mode | IDD | 4.7 | 5.6 | mA | VDD = 3.6V; HFINTOSC mode | 372 | |
| Power-down Base Current (IPD) WDT, BOR, FVR, and T1OSC disabled | IPD | 0.06 | 7 | µA | VDD = 1.8V; WDT, BOR, FVR, and T1OSC disabled, all Peripherals Inactive; max at +125°C | 373 | |
| Input Low Voltage I/O PORT with TTL buffer | VIL | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 375 | ||
| Input Low Voltage I/O PORT | VIL | 0.15 | VDD | 1.8V ≤ VDD ≤ 4.5V; printed as 0.15 VDD | 375 | ||
| Input Low Voltage I/O PORT with Schmitt Trigger buffer | VIL | 0.2 | VDD | 2.0V ≤ VDD ≤ 5.5V; printed as 0.2 VDD | 375 | ||
| Input High Voltage I/O PORT with TTL buffer | VIH | 2 | V | 4.5V ≤ VDD ≤ 5.5V | 375 | ||
| Input High Voltage I/O PORT with Schmitt Trigger buffer | VIH | 0.8 | VDD | 2.0V ≤ VDD ≤ 5.5V; printed as 0.8 VDD | 375 | ||
| Weak Pull-up Current | IPUR | 25 | 100 | 200 | µA | VDD = 3.3V, VPIN = VSS | 375 |
| Weak Pull-up Current | IPUR | 25 | 140 | 300 | µA | VDD = 5.0V, VPIN = VSS | 375 |
| Output Low Voltage I/O ports | VOL | 0.6 | V | IOL = 8mA, VDD = 5V; IOL = 6mA, VDD = 3.3V; IOL = 1.8mA, VDD = 1.8V | 375 | ||
| Capacitive loading OSC2 pin | COSC2 | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 376 | ||
| Capacitive loading all I/O pins | CIO | 50 | pF | 376 | |||
| Voltage on MCLR/VPP/RE3 pin | VIHH | 8 | 9 | V | Note 3, Note 4 | 377 | |
| Supply Current during Programming | IDDP | 10 | mA | 377 | |||
| External CLKIN Frequency (high) | FOSC | 20 | MHz | EC Oscillator mode (high) | 380 | ||
| Internal LFINTOSC Frequency | LFOSC | -25 | 31 | 25 | % | -40°C ≤ TA ≤ +125°C; typ printed as 31 kHz | 381 |
| Oscillator Frequency Range | F10 | 4 | 8 | MHz | 381 | ||
| CLKOUT Stability (Jitter) | CLK | -0.25 | 0.25 | % | 381 | ||
| Maximum Junction Temperature | TJMAX | 150 | C | 378 | |||
| Thermal Resistance Junction to Ambient | JA | 71 | C/W | 28-pin SSOP package | 378 |
CAD (KiCad official)
- Symbol:
PIC16F1933-E - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
pic16f1933-e-etched.step/pic16f1933-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f1933-e.step/pic16f1933-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (464 pp, sha256
81839274508365b1, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).