3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPIC16F18444-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · UQFN-20(4x4)
PIC16F18444-I from Microchip Tech, in a UQFN-20(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RA3/MCLR/VPP | input | Input-only pin that acts as the Master Clear reset input when MCLRE is enabled and as the high-voltage programming voltage input VPP; when MCLRE is disabled it operates as a digital input-only PORT pin with interrupt-on-change and weak pull-up support. |
| 2 | RC5 | bidirectional | Bidirectional I/O pin with analog input ANC5, MDCARH, T4IN, and CCP1IN digital peripheral inputs, and selectable interrupt-on-change and pull-up. |
| 3 | RC4 | bidirectional | Bidirectional I/O pin with analog input ANC4 and interrupt-on-change support, with pull-up available. |
| 4 | RC3 | bidirectional | Bidirectional I/O pin with analog input ANC3, comparator inputs C1IN3- and C2IN3-, CCP2IN, and CLCIN1 digital inputs, with interrupt-on-change and pull-up support. |
| 5 | RC6 | bidirectional | Bidirectional I/O pin with analog input ANC6 and SS1 slave-select input, with interrupt-on-change and pull-up support. |
| 6 | RC7 | bidirectional | Bidirectional I/O pin with analog input ANC7 and interrupt-on-change and pull-up support. |
| 7 | RB7 | bidirectional | Bidirectional I/O pin with analog input ANB7, T6IN timer input, SCK2/SCL2 serial clock, and CK1 EUSART clock, with interrupt-on-change and pull-up support. |
| 8 | RB6 | bidirectional | Bidirectional I/O pin with analog input ANB6 and SCK1/SCL1 MSSP1 serial clock, with interrupt-on-change and pull-up support. |
| 9 | RB5 | bidirectional | Bidirectional I/O pin with analog input ANB5, CCP3IN, SDI2/SDA2, RX1/DT1, and CLCIN3 digital inputs, with interrupt-on-change and pull-up support. |
| 10 | RB4 | bidirectional | Bidirectional I/O pin with analog input ANB4, T5G gate input, SDI1/SDA1, and CLCIN2 digital inputs, with interrupt-on-change and pull-up support. |
| 11 | RC2 | bidirectional | Bidirectional I/O pin with analog input ANC2, ADACT auto-conversion trigger input, comparator inputs C1IN2- and C2IN2-, MDCARL, and T5CKI timer clock input, with interrupt-on-change and pull-up support. |
| 12 | RC1 | bidirectional | Bidirectional I/O pin with analog input ANC1 and comparator inputs C1IN1- and C2IN1-, with interrupt-on-change and pull-up support. |
| 13 | RC0 | bidirectional | Bidirectional I/O pin with analog input ANC0, comparator input C2IN0+, and T3CKI and T3G timer inputs, with interrupt-on-change and pull-up support. |
| 14 | RA2 | bidirectional | Bidirectional I/O pin with analog input ANA2, ADC and DAC reference inputs ADCVREF- and DAC1VREF-, T0CKI, CWG1IN, CWG2IN, ZCD1, and external interrupt INT, with interrupt-on-change and pull-up support. |
| 15 | RA1/ICSPCLK | bidirectional | Bidirectional I/O pin with analog input ANA1, ADC positive reference ADCVREF+, comparator input C1IN0-/C2IN0-, DAC1VREF+, MDSRC, SS2 input, and ICSPCLK/ICDCLK in-circuit programming and debug clock. |
| 16 | RA0/ICSPDAT | bidirectional | Bidirectional I/O pin with analog input ANA0, comparator input C1IN0+, DAC1OUT1 output, and ICSPDAT/ICDDAT in-circuit programming and debug data, with interrupt-on-change and pull-up support. |
| 17 | VSS | power_in | Ground reference for the logic and I/O pins; the datasheet recommends connecting the exposed bottom pad to VSS. |
| 18 | VDD | power_in | Positive supply pin for the device; decoupling capacitors on every VDD/VSS pair are required. |
| 19 | RA5 | bidirectional | Bidirectional I/O pin that also serves as the external clock input CLKIN/OSC1 or secondary oscillator input SOSCI, with analog input ANA5, T1CKI, T2IN, and SMT1SIG inputs, and interrupt-on-change and pull-up support. |
| 20 | RA4 | bidirectional | Bidirectional I/O pin that also serves as CLKOUT, secondary oscillator output SOSCO, or OSC2, with analog input ANA4, T1G, SMT1WIN, and CCP4IN inputs, and interrupt-on-change and pull-up support. |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | UQFN-20(4x4) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 21 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VDD (PIC16F variant, FOSC ≤ 16 MHz) | VDD | 2.3 | 5.5 | V | FOSC ≤ 16 MHz | 631 | |
| Supply voltage VDD (PIC16F variant, FOSC > 16 MHz) | VDD | 2.5 | 5.5 | V | FOSC > 16 MHz | 631 | |
| RAM data retention voltage | VDR | 1.7 | V | Device in Sleep mode | 631 | ||
| VDD rise rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | BOR or LPBOR disabled | 631 | ||
| Operating ambient temperature, industrial | TA | -40 | 85 | °C | Industrial temperature range | 629 | |
| Supply current, XT = 4 MHz | IDDXT4 | 515 | 710 | μA | XT = 4 MHz, VDD 3.0V | 633 | |
| Supply current, HFINTOSC = 16 MHz | IDDHFO16 | 2.2 | 2.7 | mA | HFINTOSC = 16 MHz, VDD 3.0V | 633 | |
| Supply current, HFINTOSC = 32 MHz (PLL) | IDDHFOPLL | 4 | 4.9 | mA | HFINTOSC = 32 MHz, VDD 3.0V | 633 | |
| Supply current, HS+PLL = 32 MHz | IDDHSPLL32 | 3.7 | 4.5 | mA | HS+PLL = 32 MHz, VDD 3.0V | 633 | |
| Supply current, IDLE mode | IDDIDLE | 1.6 | 2 | mA | IDLE mode, HFINTOSC = 16 MHz, VDD 3.0V | 633 | |
| Power-down current IPD base | IPD | 0.4 | 2.5 | μA | Max +85°C, VDD 3.0V | 635 | |
| Power-down current IPD base | IPD | 0.4 | 8 | μA | Max +125°C, VDD 3.0V | 635 | |
| Power-down current, low-frequency INTOSC/WDT | IPD_WDT | 1 | 2.9 | μA | Max +85°C, VDD 3.0V | 635 | |
| Power-down current, low-frequency INTOSC/WDT | IPD_WDT | 1 | 9 | μA | Max +125°C, VDD 3.0V | 635 | |
| Power-down current, Brown-out Reset (BOR) | IPD_BOR | 11 | 16 | μA | Max +85°C, VDD 3.0V | 635 | |
| Power-down current, Brown-out Reset (BOR) | IPD_BOR | 11 | 19 | μA | Max +125°C, VDD 3.0V | 635 | |
| Brown-out Reset voltage, BORV=0 | VBOR | 2.55 | 2.7 | 2.85 | V | BORV=0 | 645 |
| Brown-out Reset voltage, BORV=1 (F devices) | VBOR | 2.3 | 2.45 | 2.6 | V | BORV=1 (F devices only) | 645 |
| Input low voltage, TTL buffer | VIL | 0.8 | V | 4.5V≤VDD≤5.5V | 636 | ||
| Input low voltage, standard I/O | VIL | 0.15 | VDD | 1.8V≤VDD≤4.5V (printed as 0.15 VDD) | 636 | ||
| Input low voltage, Schmitt Trigger buffer | VIL | 0.2 | VDD | 2.0V≤VDD≤5.5V | 636 | ||
| Input low voltage, I2C levels | VIL | 0.3 | VDD | I2C levels | 636 | ||
| Input low voltage, SMBus levels | VIL | 0.8 | V | 2.7V≤VDD≤5.5V | 636 | ||
| Input low voltage, MCLR | VIL | 0.2 | VDD | MCLR | 636 | ||
| Input high voltage, TTL buffer | VIH | 2 | V | 4.5V≤VDD≤5.5V | 636 | ||
| Input high voltage, Schmitt Trigger buffer | VIH | 0.8 | VDD | 2.0V≤VDD≤5.5V | 636 | ||
| Input high voltage, I2C levels | VIH | 0.7 | VDD | I2C levels | 636 | ||
| Input high voltage, SMBus levels | VIH | 2.1 | V | 2.7V≤VDD≤5.5V | 636 | ||
| Input high voltage, MCLR | VIH | 0.7 | VDD | MCLR | 636 | ||
| Input leakage current, I/O ports | IIL | -125 | 125 | nA | VSS≤VPIN≤VDD, pin at high-impedance, 85°C | 636 | |
| Input leakage current, I/O ports | IIL | -1000 | 1000 | nA | VSS≤VPIN≤VDD, pin at high-impedance, 125°C | 636 | |
| Input leakage current, MCLR | IIL | -200 | 200 | nA | VSS≤VPIN≤VDD, pin at high-impedance, 85°C | 636 | |
| Weak pull-up current | IPUR | 25 | 120 | 200 | μA | VDD=3.0V, VPIN=VSS | 636 |
| Output low voltage, standard I/O | VOL | 0.6 | V | IOL = 10 mA, VDD = 3.0V | 636 | ||
| Pin capacitance, all I/O pins | CIO | 5 | 50 | pF | 636 | ||
| Voltage on MCLR/VPP pin to enter programming mode | VIHH | 8 | 9 | V | Note 2, Note 3 | 637 | |
| Supply current during programming | IDDPGM | 10 | mA | 637 | |||
| DataEE byte endurance | ED | 100 | k E/W | -40°C≤TA≤+85°C | 637 | ||
| Total erase/write cycles before refresh (data EEPROM) | ND_REF | 100 | k E/W | 637 | |||
| Byte erase and write cycle time | TD_BEW | 4 | 5 | ms | 637 | ||
| Flash memory cell endurance | EP | 10 | k E/W | -40°C≤Ta≤+85°C (Note 1) | 637 | ||
| Self-timed row erase or self-timed write time | TP_REW | 2 | 2.8 | ms | 638 | ||
| Ambient temperature under bias | -40 | 125 | °C | 628 | |||
| Storage temperature | -65 | 150 | °C | 628 | |||
| Voltage on VDD pin (PIC16F) | VDD | -0.3 | 6.5 | V | with respect to VSS | 628 | |
| Voltage on MCLR pin | -0.3 | 9 | V | with respect to VSS | 628 | ||
| Voltage on all other pins | -0.3 | V | with respect to VSS; upper limit printed as VDD + 0.3V | 628 | |||
| Maximum current on VSS pin | 250 | mA | -40°C ≤ TA ≤ +85°C | 628 | |||
| Maximum current on VSS pin | 120 | mA | 85°C < TA ≤ +125°C | 628 | |||
| Maximum current on VDD pin | VDD | 250 | mA | -40°C ≤ TA ≤ +85°C | 628 | ||
| Maximum current on VDD pin | VDD | 85 | mA | 85°C < TA ≤ +125°C | 628 | ||
| Maximum current on any standard I/O pin | -50 | 50 | mA | 628 | |||
| Clamp current, IK | IK | -20 | 20 | mA | VPIN < 0 or VPIN > VDD | 628 | |
| Total power dissipation | 800 | mW | 628 | ||||
| System clock frequency FOSC | FOSC | 32 | MHz | Note 2, Note 3 | 640 | ||
| Secondary oscillator clock frequency | FSEC | 32.4 | 32.768 | 33.1 | kHz | Note 4 | 640 |
| PLL output frequency stability (jitter) | PLL04 | -0.25 | 0.25 | % | 643 | ||
| Thermal resistance, junction to ambient, 20-pin UQFN 4x4mm | θJA | 43 | °C/W | -40°C ≤ TA ≤ +125°C | 638 | ||
| Thermal resistance, junction to case, 20-pin UQFN 4x4mm | θJC | 5.3 | °C/W | 20-pin UQFN 4x4mm package | 639 | ||
| Maximum junction temperature | TJMAX | 150 | °C | 639 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PPS | body RxyPPS | 267 |
CAD (KiCad official)
- Symbol:
PIC16F18444-I - Footprint:
Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm - 3D model: UQFN-20(4x4), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.5 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
pic16f18444-i-gz-etched.step/pic16f18444-i-gz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f18444-i-gz.step/pic16f18444-i-gz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (707 pp, sha256
bdf26783d2114dfd, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).