3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPIC16F18426-I/SL
Microchip Tech · Microcontrollers (MCU/MPU/SOC) · SOIC-14
PIC16F18426-I from Microchip Tech, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply pin; all VDD and VSS pins must always be connected, with a decoupling capacitor on each pin pair. |
| 2 | RA5 | bidirectional | Digital I/O with analog input ANA5, interrupt-on-change and weak pull-up, multiplexed with CLKIN/OSC1, SOSCI and the T1CKI, T2IN and SMT1SIG peripheral inputs. |
| 3 | RA4 | bidirectional | Digital I/O with analog input ANA4, interrupt-on-change and weak pull-up, multiplexed with CLKOUT/OSC2, SOSCO and the T1G and SMT1WIN peripheral inputs. |
| 4 | MCLR/VPP/RA3 | input | Input-only pin that acts as the Master Clear reset input when MCLRE is enabled and as the programming voltage input during high-voltage programming; it reads as a port input when MCLR is disabled. |
| 5 | RC5 | bidirectional | Digital I/O with analog input ANC5, multiplexed with the MDCARH, T3CKI and CCP1IN inputs, the SDI2/SDA2 MSSP lines (I2C levels) and the RX1/DT1 EUSART lines. |
| 6 | RC4 | bidirectional | Digital I/O with analog input ANC4, multiplexed with the T3G input, the SCK2/SCL2 MSSP lines (I2C levels), the CK1 EUSART clock and the CLCIN1 input. |
| 7 | RC3 | bidirectional | Digital I/O with analog input ANC3, multiplexed with the C1IN3- and C2IN3- comparator inputs, the T5G and CCP2IN inputs, the SS1 input and the CLCIN0 input. |
| 8 | RC2 | bidirectional | Digital I/O with analog input ANC2, multiplexed with the ADACT trigger input, the C1IN2- and C2IN2- comparator inputs and the MDCARL input. |
| 9 | RC1 | bidirectional | Digital I/O with analog input ANC1, multiplexed with the C1IN1- and C2IN1- comparator inputs, the T4IN and CCP4IN inputs and the SDI1/SDA1 MSSP lines (I2C levels); the CLCIN2 input is also available here. |
| 10 | RC0 | bidirectional | Digital I/O with analog input ANC0, multiplexed with the C2IN0+ comparator input, the T5CKI input and the SCK1/SCL1 MSSP lines (I2C levels). |
| 11 | RA2 | bidirectional | Digital I/O with analog input ANA2, interrupt-on-change and weak pull-up, multiplexed with ADCVREF-, DAC1VREF-, the T0CKI, CCP3IN, CWG1IN and CWG2IN inputs, the ZCD1 input and the external INT interrupt input. |
| 12 | RA1 | bidirectional | Digital I/O with analog input ANA1, interrupt-on-change and weak pull-up, multiplexed with ADCVREF+, the C1IN0- and C2IN0- comparator inputs, DAC1VREF+ and the ICSPCLK programming clock. |
| 13 | RA0 | bidirectional | Digital I/O with analog input ANA0, interrupt-on-change and weak pull-up, multiplexed with the C1IN0+ comparator input, the DAC1OUT1 output and the ICSPDAT programming data line. |
| 14 | VSS | power_in | Ground reference pin; all VDD and VSS pins must always be connected. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-14 |
| Category | Embedded Processors & Controllers |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating supply voltage (FOSC ≤ 16 MHz) | VDD | 2.3 | 5.5 | V | FOSC ≤ 16 MHz | 632 | |
| Operating supply voltage (FOSC > 16 MHz) | VDD | 2.5 | 5.5 | V | FOSC > 16 MHz | 632 | |
| Operating ambient temperature range (Industrial) | TA | -40 | 85 | °C | Industrial temperature range | 630 | |
| RAM data retention voltage | VDR | 1.7 | V | Device in Sleep mode | 632 | ||
| Power-on Reset release voltage | VPOR | 1.6 | V | BOR or LPBOR disabled; typ at 3.0V, 25°C | 632 | ||
| Power-on Reset rearm voltage | VPORR | 1.5 | V | BOR or LPBOR disabled | 632 | ||
| Ambient temperature under bias | -40 | 125 | °C | 629 | |||
| Storage temperature | -65 | 150 | °C | 629 | |||
| Voltage on VDD pin with respect to VSS | VDD | -0.3 | 6.5 | V | PIC16F18426/46 | 629 | |
| Voltage on MCLR pin with respect to VSS | VMCLR | -0.3 | 9 | V | 629 | ||
| Maximum current on VSS pin | 250 | mA | -40°C ≤ TA ≤ +85°C | 629 | |||
| Maximum current on VDD pin | 250 | mA | -40°C ≤ TA ≤ +85°C | 629 | |||
| Maximum current on any standard I/O pin | -50 | 50 | mA | 629 | |||
| Clamp current | IK | -20 | 20 | mA | VPIN < 0 or VPIN > VDD | 629 | |
| Total power dissipation | 800 | mW | 629 | ||||
| Thermal resistance junction to ambient, 14-pin SOIC | θJA | 95.3 | °C/W | 14-pin SOIC package | 639 | ||
| Thermal resistance junction to case, 14-pin SOIC | θJC | 31 | °C/W | 14-pin SOIC package | 640 | ||
| Maximum junction temperature | TJMAX | 150 | °C | 640 | |||
| Supply current, XT = 4 MHz | IDDXT4 | 515 | 710 | μA | XT = 4 MHz, 3.0V | 634 | |
| Supply current, HFINTOSC = 16 MHz | IDDHFO16 | 2.2 | 2.7 | mA | HFINTOSC = 16 MHz, 3.0V | 634 | |
| Supply current, HFINTOSC = 32 MHz PLL | IDDHFOPLL | 4 | 4.9 | mA | HFINTOSC = 32 MHz, 3.0V | 634 | |
| Supply current, HS + PLL = 32 MHz | IDDHSPLL32 | 3.7 | 4.5 | mA | HS+PLL = 32 MHz, 3.0V | 634 | |
| Supply current, IDLE mode | IDDIDLE | 1.6 | 2 | mA | IDLE mode, HFINTOSC = 16 MHz, 3.0V | 634 | |
| Supply current, DOZE mode | IDDDOZE | 1.6 | mA | DOZE mode, HFINTOSC = 16 MHz, Doze Ratio = 16, 3.0V | 634 | ||
| Power-down current IPD base | IPD | 0.4 | 2.5 | μA | Max at +85°C, 3.0V | 636 | |
| Power-down current IPD base, VREGPM = 0 | IPD | 18 | 25 | μA | VREGPM = 0, max at +85°C, 3.0V | 636 | |
| Power-down current Low-Frequency Internal Oscillator/WDT | IPD_WDT | 1 | 2.9 | μA | Max at +85°C, 3.0V | 636 | |
| Power-down current Secondary Oscillator (SOSC) | IPD_SOSC | 1.2 | 4.3 | μA | Max at +85°C, 3.0V | 636 | |
| Power-down current FVR | IPD_FVR | 40 | 69 | μA | Max at +85°C, 3.0V | 636 | |
| Power-down current Brown-out Reset (BOR) | IPD_BOR | 11 | 16 | μA | Max at +85°C, 3.0V | 636 | |
| Power-down current ADC non-converting | IPD_ADCA | 0.38 | 2.5 | μA | Max at +85°C, 3.0V, ADC not converting | 636 | |
| Power-down current Comparator | IPD_CMP | 31 | 58 | μA | Max at +85°C, 3.0V | 636 | |
| Input low voltage, TTL buffer | VIL | 0.8 | V | I/O port with TTL buffer, 4.5V ≤ VDD ≤ 5.5V | 637 | ||
| Input low voltage, SMBus levels | VIL | 0.8 | V | I/O port with SMBus levels, 2.7V ≤ VDD ≤ 5.5V | 637 | ||
| Input high voltage, TTL buffer | VIH | 2 | V | I/O port with TTL buffer, 4.5V ≤ VDD ≤ 5.5V | 637 | ||
| Input high voltage, SMBus levels | VIH | 2.1 | V | I/O port with SMBus levels, 2.7V ≤ VDD ≤ 5.5V | 637 | ||
| Input leakage current, I/O ports | IIL | 5 | 125 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, 85°C | 637 | |
| Input leakage current, MCLR | IIL | 50 | 200 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, 85°C | 637 | |
| Weak pull-up current | IPUR | 25 | 120 | 200 | μA | VDD = 3.0V, VPIN = VSS | 637 |
| Output low voltage, standard I/O | VOL | 0.6 | V | IOL = 10 mA, VDD = 3.0V | 637 | ||
| Pin capacitance, all I/O pins | CIO | 5 | 50 | pF | 637 | ||
| Voltage on MCLR/VPP pin to enter programming mode | VIHH | 8 | 9 | V | Note 2, Note 3 | 638 | |
| Supply current during programming | IDDPGM | 10 | mA | 638 | |||
| Byte erase and write cycle time | TD_BEW | 4 | 5 | ms | 638 | ||
| Program Flash characteristic retention | TP_RET | 40 | Year | Provided no other specifications are violated | 639 | ||
| Self-timed row erase or self-timed write | TP_REW | 2 | 2.8 | ms | 639 | ||
| External clock frequency, ECH oscillator | FECH | 32 | MHz | ECH oscillator | 641 | ||
| External clock frequency, LP oscillator | FLP | 100 | kHz | LP oscillator, Note 4 | 641 | ||
| External clock frequency, XT oscillator | FXT | 4 | MHz | XT oscillator, Note 4 | 641 | ||
| External clock frequency, HS oscillator | FHS | 20 | MHz | HS oscillator, Note 4 | 641 | ||
| Secondary oscillator clock frequency | FSEC | 32.4 | 32.768 | 33.1 | kHz | Note 4 | 641 |
| PLL input frequency range | FPLLIN | 4 | 16 | MHz | 643 | ||
| PLL output frequency range | FPLLOUT | 16 | 32 | MHz | Note 1 | 643 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PPS | body RxyPPS | 267 |
CAD (KiCad official)
- Symbol:
PIC16F18426-I - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
pic16f18426-i-etched.step/pic16f18426-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f18426-i.step/pic16f18426-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (708 pp, sha256
3f4a8be840a03f4d, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC16F18426-I/SL. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC16F18426-I/P
- PIC16F18426-I/ST