main
Ray
pic16f18313t-i-sn: renamed from pic16f18313t-i, the part it was built from (PIC16F18313T-I/SN); family listed
27bf4a5
PIC16F18313T-I/SN
Microchip Tech · Pre-ordered MCUs · SOIC-8-EP
PIC16F18313T-I from Microchip Tech, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply; all VDD and VSS pins must be connected and decoupled with a 0.1 µF ceramic capacitor placed close to the pins, and none may be left floating. |
| 2 | RA5 | bidirectional | General-purpose TTL/ST input and CMOS output; also OSC1/CLKIN (crystal or external clock input), T1CKI, SOSCI/SOSCIN, ANA5 analog input and CCP1/CCP2 inputs. |
| 3 | RA4 | bidirectional | General-purpose TTL/ST input and CMOS output; also OSC2/CLKOUT (FOSC/4 output), SOSCO, T1G timer gate input and ANA4 analog input. |
| 4 | RA3/MCLR/VPP | input | Input-only pin (RA3) with internal pull-up when MCLR is enabled; functions as Master Clear reset input when MCLRE is set, and as high-voltage programming supply VPP. |
| 5 | RA2 | bidirectional | General-purpose TTL/ST input and CMOS output; also ANA2 analog input, VREF- and DAC1REF- negative references, T0CKI, CWG1IN and external interrupt INT. |
| 6 | RA1/ICSPCLK | bidirectional | General-purpose TTL/ST input and CMOS output; also ICSPCLK serial programming clock, ICDCLK in-circuit debug clock, ANA1 analog input and VREF+ positive reference input. |
| 7 | RA0/ICSPDAT | bidirectional | General-purpose TTL/ST input and CMOS output; also ICSPDAT serial programming data I/O, ICDDAT in-circuit debug data I/O, ANA0 analog input, C1IN0+ comparator input and DAC1OUT output. |
| 8 | VSS | power_in | Ground reference; all VDD and VSS pins must be connected. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8-EP |
| Category | Embedded Processors & Controllers |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage on VDD pin with respect to VSS | VDD | -0.3 | 6.5 | V | PIC16F18313/18323 | 390 | |
| Voltage on MCLR pin with respect to VSS | -0.3 | 9 | V | 390 | |||
| Ambient temperature under bias | -40 | 125 | °C | 390 | |||
| Storage temperature | -65 | 150 | °C | 390 | |||
| Maximum current on VSS pin | 250 | mA | -40°C TA +85°C | 390 | |||
| Maximum current on VSS pin | 85 | mA | +85°C TA +125°C | 390 | |||
| Maximum current on VDD pin | 250 | mA | -40°C TA +85°C | 390 | |||
| Maximum current on VDD pin | 85 | mA | +85°C TA +125°C | 390 | |||
| Maximum current on any I/O pin | 50 | mA | 390 | ||||
| Clamp current | IK | 20 | mA | VPIN < 0 or VPIN > VDD | 390 | ||
| Total power dissipation | 800 | mW | 390 | ||||
| VDDMIN operating supply voltage | VDD | 2.3 | V | PIC16F18313/18323, FOSC ≤ 16 MHz | 391 | ||
| VDDMIN operating supply voltage | VDD | 2.5 | V | PIC16F18313/18323, FOSC ≤ 32 MHz | 391 | ||
| VDDMAX operating supply voltage | VDD | 5.5 | V | PIC16F18313/18323 | 391 | ||
| TA_MIN operating ambient temperature | TA | -40 | °C | Industrial temperature | 391 | ||
| TA_MAX operating ambient temperature | TA | 85 | °C | Industrial temperature | 391 | ||
| Supply voltage VDD (D002) | VDD | 2.3 | 5.5 | V | FOSC ≤ 16 MHz | 393 | |
| Supply voltage VDD (D002) | VDD | 2.5 | 5.5 | V | FOSC > 16 MHz | 393 | |
| RAM data retention voltage | VDR | 1.7 | V | Device in Sleep mode | 393 | ||
| VDD rise rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | BOR and LPBOR disabled | 393 | ||
| Supply current XT oscillator 4 MHz | IDDXT4 | 302 | 410 | uA | XT = 4 MHz; 3.0V | 395 | |
| Supply current HFINTOSC 16 MHz | IDDHFO16 | 1.3 | 1.6 | mA | HFINTOSC = 16 MHz; 3.0V | 395 | |
| Supply current HFINTOSC 32 MHz PLL | IDDHFOPLL | 2.1 | 2.6 | mA | HFINTOSC = 32 MHz; 3.0V | 395 | |
| Supply current HS+PLL 32 MHz | IDDHSPLL32 | 2.1 | 2.5 | mA | HS+PLL = 32 MHz; 3.0V | 395 | |
| Supply current Idle mode | IDDIDLE | 743 | 1100 | uA | Idle Mode, HFINTOSC = 16 MHz; 3.0V | 395 | |
| Power-down current IPD base | IPD | 0.3 | 2.4 | µA | VREGPM = 1; 3.0V; max at +85°C | 396 | |
| Power-down current IPD base | IPD | 0.3 | 5.6 | µA | VREGPM = 1; 3.0V; max at +125°C | 396 | |
| Power-down current Low-Frequency Internal Oscillator/WDT | IPD_WDT | 0.5 | 3.3 | µA | VREGPM = 1; 3.0V; max at +85°C | 396 | |
| Power-down current Low-Frequency Internal Oscillator/WDT | IPD_WDT | 0.5 | 6.6 | µA | VREGPM = 1; 3.0V; max at +125°C | 396 | |
| Power-down current Brown-out Reset (BOR) | IPD_BOR | 10.5 | 16.4 | µA | VREGPM = 1; 3.0V; max at +85°C | 396 | |
| Power-down current Brown-out Reset (BOR) | IPD_BOR | 10.5 | 19.4 | µA | VREGPM = 1; 3.0V; max at +125°C | 396 | |
| Power-down current Comparator | IPD_CMP | 30 | 44 | µA | VREGPM = 1; 3.0V; max at +85°C | 396 | |
| Power-down current Comparator | IPD_CMP | 30 | 49 | µA | VREGPM = 1; 3.0V; max at +125°C | 396 | |
| Input low voltage, TTL buffer | VIL | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 397 | ||
| Input low voltage, 1.8V to 4.5V range | VIL | 0.15 | VDD | 1.8V ≤ VDD ≤ 4.5V | 397 | ||
| Input low voltage, Schmitt Trigger buffer | VIL | 0.2 | VDD | 2.0V ≤ VDD ≤ 5.5V | 397 | ||
| Input low voltage, MCLR | VIL | 0.2 | VDD | 397 | |||
| Input high voltage, TTL buffer | VIH | 2 | V | 4.5V ≤ VDD ≤ 5.5V | 397 | ||
| Input high voltage, Schmitt Trigger buffer | VIH | 0.8 | VDD | 2.0V ≤ VDD ≤ 5.5V | 397 | ||
| Input high voltage, MCLR | VIH | 0.7 | VDD | 397 | |||
| Input leakage current, I/O ports | IIL | -125 | 5 | 125 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, 85°C | 397 |
| Input leakage current, I/O ports | IIL | -1000 | 5 | 1000 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, 125°C | 397 |
| Input leakage current, MCLR | IIL | -200 | 50 | 200 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, 85°C | 397 |
| Weak pull-up current | IPUR | 25 | 120 | 200 | µA | VDD = 3.0V, VPIN = VSS | 397 |
| Output low voltage, I/O ports | VOL | 0.6 | V | IOL = 10.0 mA, VDD = 3.0V | 397 | ||
| PLL input frequency range | FPLLIN | 4 | 8 | MHz | 403 | ||
| PLL output frequency range | FPLLOUT | 16 | 32 | MHz | 403 | ||
| Watchdog Timer time-out period | TWDT | 10 | 16 | 27 | ms | 16 ms Nominal Reset Time | 406 |
| Power-up Timer period | TPWRT | 40 | 65 | 140 | ms | 406 | |
| Brown-out Reset voltage | VBOR | 2.55 | 2.7 | 2.85 | V | BORV = 0 | 406 |
| Brown-out Reset voltage | VBOR | 2.3 | 2.45 | 2.6 | V | BORV = 1 (PIC16F18313/18323) | 406 |
| Voltage on MCLR/VPP pin to enter Programming mode | VIHH | 7.9 | 9 | V | Note 2 | 398 | |
| Supply current during programming operation | IDDPGM | 5 | mA | 398 | |||
| Junction-to-ambient thermal resistance, 8-pin SOIC | JA | 112.4 | C/W | 8-pin SOIC package | 399 | ||
| Junction-to-case thermal resistance, 8-pin SOIC | JC | 50 | C/W | 8-pin SOIC package | 399 | ||
| Maximum junction temperature | TJMAX | 150 | C | 399 | |||
| Power-on Reset release voltage | VPOR | 1.6 | V | BOR and LPBOR disabled | 393 | ||
| Power-on Reset rearm voltage | VPORR | 1.5 | V | BOR and LPBOR disabled | 393 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PPS | BODY RxyPPS | 259 |
CAD (KiCad official)
- Symbol:
PIC16F18313T-I - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: SOIC-8-EP (KiCad packages3D, STEP)
- 3D model files:
pic16f18313t-i-etched.step/pic16f18313t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f18313t-i.step/pic16f18313t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (471 pp, sha256
5b9713da292b02eb, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC16F18313T-I/SN. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC16F18313T-I/RF
# PIC16F18313T-I/SN
**Microchip Tech** · Pre-ordered MCUs · SOIC-8-EP
PIC16F18313T-I from Microchip Tech, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply; all VDD and VSS pins must be connected and decoupled with a 0.1 µF ceramic capacitor placed close to the pins, and none may be left floating. |
| 2 | RA5 | bidirectional | General-purpose TTL/ST input and CMOS output; also OSC1/CLKIN (crystal or external clock input), T1CKI, SOSCI/SOSCIN, ANA5 analog input and CCP1/CCP2 inputs. |
| 3 | RA4 | bidirectional | General-purpose TTL/ST input and CMOS output; also OSC2/CLKOUT (FOSC/4 output), SOSCO, T1G timer gate input and ANA4 analog input. |
| 4 | RA3/MCLR/VPP | input | Input-only pin (RA3) with internal pull-up when MCLR is enabled; functions as Master Clear reset input when MCLRE is set, and as high-voltage programming supply VPP. |
| 5 | RA2 | bidirectional | General-purpose TTL/ST input and CMOS output; also ANA2 analog input, VREF- and DAC1REF- negative references, T0CKI, CWG1IN and external interrupt INT. |
| 6 | RA1/ICSPCLK | bidirectional | General-purpose TTL/ST input and CMOS output; also ICSPCLK serial programming clock, ICDCLK in-circuit debug clock, ANA1 analog input and VREF+ positive reference input. |
| 7 | RA0/ICSPDAT | bidirectional | General-purpose TTL/ST input and CMOS output; also ICSPDAT serial programming data I/O, ICDDAT in-circuit debug data I/O, ANA0 analog input, C1IN0+ comparator input and DAC1OUT output. |
| 8 | VSS | power_in | Ground reference; all VDD and VSS pins must be connected. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8-EP |
| Category | Embedded Processors & Controllers |
| Pins | 9 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage on VDD pin with respect to VSS | VDD | -0.3 | | 6.5 | V | PIC16F18313/18323 | 390 |
| Voltage on MCLR pin with respect to VSS | | -0.3 | | 9 | V | | 390 |
| Ambient temperature under bias | | -40 | | 125 | °C | | 390 |
| Storage temperature | | -65 | | 150 | °C | | 390 |
| Maximum current on VSS pin | | | | 250 | mA | -40°C TA +85°C | 390 |
| Maximum current on VSS pin | | | | 85 | mA | +85°C TA +125°C | 390 |
| Maximum current on VDD pin | | | | 250 | mA | -40°C TA +85°C | 390 |
| Maximum current on VDD pin | | | | 85 | mA | +85°C TA +125°C | 390 |
| Maximum current on any I/O pin | | | | 50 | mA | | 390 |
| Clamp current | IK | | | 20 | mA | VPIN < 0 or VPIN > VDD | 390 |
| Total power dissipation | | | | 800 | mW | | 390 |
| VDDMIN operating supply voltage | VDD | 2.3 | | | V | PIC16F18313/18323, FOSC ≤ 16 MHz | 391 |
| VDDMIN operating supply voltage | VDD | 2.5 | | | V | PIC16F18313/18323, FOSC ≤ 32 MHz | 391 |
| VDDMAX operating supply voltage | VDD | | | 5.5 | V | PIC16F18313/18323 | 391 |
| TA_MIN operating ambient temperature | TA | -40 | | | °C | Industrial temperature | 391 |
| TA_MAX operating ambient temperature | TA | | | 85 | °C | Industrial temperature | 391 |
| Supply voltage VDD (D002) | VDD | 2.3 | | 5.5 | V | FOSC ≤ 16 MHz | 393 |
| Supply voltage VDD (D002) | VDD | 2.5 | | 5.5 | V | FOSC > 16 MHz | 393 |
| RAM data retention voltage | VDR | 1.7 | | | V | Device in Sleep mode | 393 |
| VDD rise rate to ensure internal Power-on Reset signal | SVDD | 0.05 | | | V/ms | BOR and LPBOR disabled | 393 |
| Supply current XT oscillator 4 MHz | IDDXT4 | | 302 | 410 | uA | XT = 4 MHz; 3.0V | 395 |
| Supply current HFINTOSC 16 MHz | IDDHFO16 | | 1.3 | 1.6 | mA | HFINTOSC = 16 MHz; 3.0V | 395 |
| Supply current HFINTOSC 32 MHz PLL | IDDHFOPLL | | 2.1 | 2.6 | mA | HFINTOSC = 32 MHz; 3.0V | 395 |
| Supply current HS+PLL 32 MHz | IDDHSPLL32 | | 2.1 | 2.5 | mA | HS+PLL = 32 MHz; 3.0V | 395 |
| Supply current Idle mode | IDDIDLE | | 743 | 1100 | uA | Idle Mode, HFINTOSC = 16 MHz; 3.0V | 395 |
| Power-down current IPD base | IPD | | 0.3 | 2.4 | µA | VREGPM = 1; 3.0V; max at +85°C | 396 |
| Power-down current IPD base | IPD | | 0.3 | 5.6 | µA | VREGPM = 1; 3.0V; max at +125°C | 396 |
| Power-down current Low-Frequency Internal Oscillator/WDT | IPD_WDT | | 0.5 | 3.3 | µA | VREGPM = 1; 3.0V; max at +85°C | 396 |
| Power-down current Low-Frequency Internal Oscillator/WDT | IPD_WDT | | 0.5 | 6.6 | µA | VREGPM = 1; 3.0V; max at +125°C | 396 |
| Power-down current Brown-out Reset (BOR) | IPD_BOR | | 10.5 | 16.4 | µA | VREGPM = 1; 3.0V; max at +85°C | 396 |
| Power-down current Brown-out Reset (BOR) | IPD_BOR | | 10.5 | 19.4 | µA | VREGPM = 1; 3.0V; max at +125°C | 396 |
| Power-down current Comparator | IPD_CMP | | 30 | 44 | µA | VREGPM = 1; 3.0V; max at +85°C | 396 |
| Power-down current Comparator | IPD_CMP | | 30 | 49 | µA | VREGPM = 1; 3.0V; max at +125°C | 396 |
| Input low voltage, TTL buffer | VIL | | | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 397 |
| Input low voltage, 1.8V to 4.5V range | VIL | | | 0.15 | VDD | 1.8V ≤ VDD ≤ 4.5V | 397 |
| Input low voltage, Schmitt Trigger buffer | VIL | | | 0.2 | VDD | 2.0V ≤ VDD ≤ 5.5V | 397 |
| Input low voltage, MCLR | VIL | | | 0.2 | VDD | | 397 |
| Input high voltage, TTL buffer | VIH | 2 | | | V | 4.5V ≤ VDD ≤ 5.5V | 397 |
| Input high voltage, Schmitt Trigger buffer | VIH | 0.8 | | | VDD | 2.0V ≤ VDD ≤ 5.5V | 397 |
| Input high voltage, MCLR | VIH | 0.7 | | | VDD | | 397 |
| Input leakage current, I/O ports | IIL | -125 | 5 | 125 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, 85°C | 397 |
| Input leakage current, I/O ports | IIL | -1000 | 5 | 1000 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, 125°C | 397 |
| Input leakage current, MCLR | IIL | -200 | 50 | 200 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, 85°C | 397 |
| Weak pull-up current | IPUR | 25 | 120 | 200 | µA | VDD = 3.0V, VPIN = VSS | 397 |
| Output low voltage, I/O ports | VOL | | | 0.6 | V | IOL = 10.0 mA, VDD = 3.0V | 397 |
| PLL input frequency range | FPLLIN | 4 | | 8 | MHz | | 403 |
| PLL output frequency range | FPLLOUT | 16 | | 32 | MHz | | 403 |
| Watchdog Timer time-out period | TWDT | 10 | 16 | 27 | ms | 16 ms Nominal Reset Time | 406 |
| Power-up Timer period | TPWRT | 40 | 65 | 140 | ms | | 406 |
| Brown-out Reset voltage | VBOR | 2.55 | 2.7 | 2.85 | V | BORV = 0 | 406 |
| Brown-out Reset voltage | VBOR | 2.3 | 2.45 | 2.6 | V | BORV = 1 (PIC16F18313/18323) | 406 |
| Voltage on MCLR/VPP pin to enter Programming mode | VIHH | 7.9 | | 9 | V | Note 2 | 398 |
| Supply current during programming operation | IDDPGM | | | 5 | mA | | 398 |
| Junction-to-ambient thermal resistance, 8-pin SOIC | JA | | 112.4 | | C/W | 8-pin SOIC package | 399 |
| Junction-to-case thermal resistance, 8-pin SOIC | JC | | 50 | | C/W | 8-pin SOIC package | 399 |
| Maximum junction temperature | TJMAX | | 150 | | C | | 399 |
| Power-on Reset release voltage | VPOR | | 1.6 | | V | BOR and LPBOR disabled | 393 |
| Power-on Reset rearm voltage | VPORR | | 1.5 | | V | BOR and LPBOR disabled | 393 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PPS | | BODY RxyPPS | 259 |
## CAD (KiCad official)
- Symbol: `PIC16F18313T-I`
- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm`
- 3D model: SOIC-8-EP (KiCad packages3D, STEP)
- 3D model files: `pic16f18313t-i-etched.step` / `pic16f18313t-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic16f18313t-i.step` / `pic16f18313t-i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/40001799F.pdf) (471 pp, sha256 `5b9713da292b02eb`, retrieved 2026-11-05, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic16f18313t-i-datasheet.pdf)
## Other parts in this family
This page is **PIC16F18313T-I/SN**. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC16F18313T-I/RF