Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC16F1828-E

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-20-208mil

PIC16F1828-E from Microchip Tech, in a SSOP-20-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Positive supply, 1.8V-5.5V for PIC16F1828.
2 RA5 bidirectional General purpose I/O (TTL in, CMOS out) shared with external clock input (EC mode), crystal OSC1, Timer1 oscillator input, Timer1 clock input, P2A PWM output and CCP2 (APFCON1-selectable).
3 RA4 bidirectional General purpose I/O shared with ADC channel 3, capacitive sensing input 3, crystal OSC2, FOSC/4 CLKOUT, Timer1 oscillator output, clock reference output, P2B PWM output and Timer1 gate input.
4 RA3/MCLR/VPP input Input-only pin (TTL) serving as general purpose input, Timer1 gate input (APFCON0-selectable), programming voltage VPP, or Master Clear with internal weak pull-up.
5 RC5 bidirectional General purpose I/O shared with P1A PWM output, CCP1, EUSART RX/DT (APFCON0-selectable) and modulator carrier input 2.
6 RC4 bidirectional General purpose I/O shared with comparator C2 output, SR latch inverting output, P1B PWM output, EUSART TX/CK and modulator output.
7 RC3 bidirectional General purpose I/O shared with ADC channel 7, capacitive sensing input 7, comparator C1/C2 negative input 3, P2A/CCP2/P1C PWM functions and modulator source input.
8 RC6/AN8/CPS8/CCP4/SS bidirectional General purpose I/O shared with ADC channel 8, capacitive sensing input 8, CCP4 and SPI Slave Select input.
9 RC7/AN9/CPS9/SDO bidirectional General purpose I/O shared with ADC channel 9, capacitive sensing input 9 and SPI data output.
10 RB7 bidirectional General purpose I/O shared with EUSART asynchronous transmit and synchronous clock.
11 RB6/SCL1/SCK1 bidirectional General purpose I/O shared with I2C clock 1 (open drain) and SPI clock 1.
12 RB5 bidirectional General purpose I/O shared with ADC channel 11, capacitive sensing input 11 and EUSART RX/DT.
13 RB4/AN10/CPS10/SDA1/SDI1 bidirectional General purpose I/O shared with ADC channel 10, capacitive sensing input 10, I2C data (open drain) and SPI data input 1.
14 RC2 bidirectional General purpose I/O shared with ADC channel 6, capacitive sensing input 6, comparator C1/C2 negative input 2, P1D/P2B PWM outputs and modulator carrier input 1.
15 RC1/AN5/CPS5/C12IN1-/P1C bidirectional General purpose I/O shared with ADC channel 5, capacitive sensing input 5, comparator C1/C2 negative input 1 and P1C PWM output.
16 RC0/AN4/CPS4/C2IN+/P1D bidirectional General purpose I/O shared with ADC channel 4, capacitive sensing input 4, comparator C2 positive input and P1D PWM output.
17 RA2 bidirectional General purpose I/O shared with ADC channel 2, capacitive sensing input 2, Timer0 clock input, external interrupt, comparator C1 output, SR latch output, CCP3 and ECCP auto-shutdown fault input.
18 RA1/ICSPCLK bidirectional General purpose I/O shared with ADC channel 1, capacitive sensing input 1, comparator negative input 0, A/D and DAC positive reference input, SR latch input, and ICSP/in-circuit debug clock.
19 RA0/ICSPDAT bidirectional General purpose I/O shared with ADC channel 0, capacitive sensing input 0, comparator C1 positive input, A/D and DAC negative reference input, DAC output and ICSP/in-circuit debug data I/O.
20 VSS power_in Ground reference.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SSOP-20-208mil
Category Single Chip Microcomputer/Microcontroller
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient temperature under bias -40 125 °C 338
Storage temperature -65 150 °C 338
Voltage on VDD with respect to VSS, PIC16F1824/8 VDD -0.3 6.5 V PIC16F1824/8 338
Voltage on MCLR with respect to VSS -0.3 9 V 338
Voltage on all other pins with respect to VSS -0.3 V upper limit printed as VDD + 0.3V 338
Maximum current out of VSS pin, industrial 210 mA -40°C ≤ TA ≤ +85°C 338
Maximum current out of VSS pin, extended 95 mA -40°C ≤ TA ≤ +125°C 338
Maximum current into VDD pin, industrial 170 mA -40°C ≤ TA ≤ +85°C 338
Maximum current into VDD pin, extended 70 mA -40°C ≤ TA ≤ +125°C 338
Clamp current IK 20 mA VPIN < 0 or VPIN > VDD 338
Supply Voltage, PIC16F1824/8 VDD 1.8 5.5 V FOSC ≤ 16 MHz 341
Supply Voltage, PIC16F1824/8 VDD 2.5 5.5 V FOSC ≤ 32 MHz (Note 2) 341
RAM Data Retention Voltage, PIC16F1824/8 VDR 1.7 V Device in Sleep mode 341
Power-on Reset Release Voltage VPOR 1.6 V 341
Power-on Reset Rearm Voltage, PIC16F1824/8 VPORR 1.4 V Device in Sleep mode 341
Fixed Voltage Reference Voltage for ADC VADFVR -8 6 % 1.024V, VDD ≥ 2.5V; 2.048V, VDD ≥ 2.5V; 4.096V, VDD ≥ 4.75V 341
Fixed Voltage Reference Voltage for Comparator and DAC VCDAFVR -11 7 % 1.024V, VDD ≥ 2.5V; 2.048V, VDD ≥ 2.5V; 4.096V, VDD ≥ 4.75V 341
VDD Rise Rate to ensure internal Power-on Reset signal SVDD 0.05 V/ms See Section 7.1 341
Supply Current, LP oscillator IDD 24 50 µA VDD=1.8V, FOSC=32 kHz LP mode, -40°C ≤ TA ≤ +85°C 343
Supply Current, LP oscillator IDD 32 60 µA VDD=5.0V, FOSC=32 kHz LP mode, -40°C ≤ TA ≤ +85°C 343
Supply Current, XT oscillator IDD 180 290 µA VDD=5.0V, FOSC=1 MHz XT mode 343
Supply Current, XT oscillator IDD 447 700 µA VDD=5.0V, FOSC=4 MHz XT mode 343
Supply Current, EC Medium-Power IDD 145 320 µA VDD=5.0V, FOSC=1 MHz EC Medium-Power mode 343
Supply Current, EC Medium-Power IDD 410 650 µA VDD=5.0V, FOSC=4 MHz EC Medium-Power mode 344
Supply Current, LFINTOSC IDD 28 70 µA VDD=5.0V, FOSC=31 kHz LFINTOSC mode, -40°C ≤ TA ≤ +85°C 344
Supply Current, MFINTOSC IDD 190 270 µA VDD=5.0V, FOSC=500 kHz MFINTOSC mode 344
Supply Current, HFINTOSC IDD 0.82 1.35 mA VDD=5.0V, FOSC=8 MHz HFINTOSC mode 344
Supply Current, HFINTOSC IDD 1.4 2 mA VDD=5.0V, FOSC=16 MHz HFINTOSC mode 344
Supply Current, HFINTOSC IDD 3.2 3.6 mA VDD=5.0V, FOSC=32 MHz HFINTOSC mode (Note 3) 345
Supply Current, HS oscillator IDD 3 3.6 mA VDD=5.0V, FOSC=32 MHz HS mode (Note 4) 345
Supply Current, EXTRC IDD 462 830 µA VDD=5.0V, FOSC=4 MHz EXTRC mode (Note 5) 345
Power-down Base Current, +85°C IPD 22 45 µA VDD=5.0V, WDT, BOR, FVR, T1OSC disabled, all peripherals inactive; max at +85°C 346
Power-down Base Current, +125°C IPD 22 65 µA VDD=5.0V, WDT, BOR, FVR, T1OSC disabled, all peripherals inactive; max at +125°C 346
FVR current IPD 68 115 µA VDD=5.0V; max at +85°C (120 at +125°C) 346
Input Low Voltage, I/O with TTL buffer VIL 0.8 V 4.5V ≤ VDD ≤ 5.5V 348
Input Low Voltage, I/O with Schmitt Trigger buffer VIL 0.2 VDD 2.0V ≤ VDD ≤ 5.5V 348
Input High Voltage, I/O with TTL buffer VIH 2 V 4.5V ≤ VDD ≤ 5.5V 348
Input High Voltage, I/O with Schmitt Trigger buffer VIH 0.8 VDD 2.0V ≤ VDD ≤ 5.5V 348
Input Leakage Current, I/O ports at 85°C IIL -125 125 nA VSS ≤ VPIN ≤ VDD, pin at high-impedance, 85°C 348
Input Leakage Current, I/O ports at 125°C IIL -1000 1000 nA VSS ≤ VPIN ≤ VDD, pin at high-impedance, 125°C 348
Input Leakage Current, MCLR IIL -200 200 nA VSS ≤ VPIN ≤ VDD at 85°C 348
Weak Pull-up Current IPUR 25 100 200 µA VDD = 3.3V, VPIN = VSS 348
Weak Pull-up Current IPUR 25 140 300 µA VDD = 5.0V, VPIN = VSS 348
Output Low Voltage, I/O ports VOL 0.6 V IOL = 8 mA, VDD = 5V; IOL = 6 mA, VDD = 3.3V; IOL = 1.8 mA, VDD = 1.8V 348
Capacitive Loading, OSC2 pin COSC2 15 pF In XT, HS and LP modes when external clock drives OSC1 348
Capacitive Loading, all I/O pins CIO 50 pF 348
Voltage on MCLR/VPP/RA5 pin for high voltage programming VIHH 8 9 V (Note 3, 4) 349
Thermal Resistance Junction to Ambient, 20-pin SSOP θJA 87.3 °C/W 20-pin SSOP package 350
Thermal Resistance Junction to Case, 20-pin SSOP θJC 31.1 °C/W 20-pin SSOP package 350
Maximum Junction Temperature TJMAX 150 °C 350
Brown-out Reset Voltage VBOR 2.55 2.7 2.85 V BORV = 0 357
Brown-out Reset Voltage VBOR 1.8 1.9 2.05 V BORV = 1 357
Watchdog Timer Time-out Period (No Prescaler) TWDTLP 12 16 20 ms VDD = 3.3V-5V 357
Power-up Timer Period TPWRT 40 65 140 ms PWRTE = 0 357
ADC Integral Error EIL -1.7 1.7 LSb VREF = 3.0V 359
ADC Offset Error EOFF -2.5 2.5 LSb VREF = 3.0V 359

CAD (KiCad official)

  • Symbol: PIC16F1828-E
  • Footprint: Package_SO:SSOP-20_5.3x7.2mm_P0.65mm
  • 3D model: SSOP-20-208mil (KiCad packages3D, STEP)
  • 3D model files: pic16f1828-e-etched.step / pic16f1828-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16f1828-e.step / pic16f1828-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (441 pp, sha256 10baf2855904f668, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF