Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC16F1784-I/PT

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-44(10x10)

PIC16F1784-I from Microchip Tech, in a TQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RC7 bidirectional PORTC I/O shared with PSMC2B, RX/DT (EUSART receive/data) and, on the 28-pin device only, C4OUT.
2 RD4 bidirectional PORTD general purpose I/O shared with PSMC3F output.
3 RD5 bidirectional PORTD general purpose I/O shared with PSMC3E output.
4 RD6 bidirectional PORTD general purpose I/O shared with C3OUT and PSMC3D output.
5 RD7 bidirectional PORTD general purpose I/O shared with C4OUT and PSMC3C output.
6 VSS power_in Ground reference.
7 VDD power_in Positive supply; 2.3V to 5.5V for PIC16F1784 (1.8V to 3.6V for PIC16LF1784).
8 RB0 bidirectional PORTB I/O shared with AN12, C2IN1+, PSMC1IN/PSMC2IN/PSMC3IN event trigger inputs, INT external interrupt and CCP1 (alternate location).
9 RB1 bidirectional PORTB I/O shared with AN10, C1IN3-/C2IN3-/C3IN3-/C4IN3- and OPA2OUT.
10 RB2 bidirectional PORTB I/O shared with AN8, OPA2IN- and CLKR clock output.
11 RB3 bidirectional PORTB I/O shared with AN9, C1IN2-/C2IN2-/C3IN2-, OPA2IN+ and CCP2 (alternate location).
12 NC unconnected No connect (per 44-pin TQFP diagram).
13 NC unconnected No connect (per 44-pin TQFP diagram).
14 RB4 bidirectional PORTB I/O shared with AN11 and C3IN1+.
15 RB5 bidirectional PORTB I/O shared with AN13, C4IN2-, T1G, CCP3 and SDO (alternate locations).
16 RB6/ICSPCLK bidirectional PORTB I/O shared with C4IN1+, TX/CK, SDI/SDA (alternate locations) and ICSPCLK serial programming clock.
17 RB7/ICSPDAT bidirectional PORTB I/O shared with DAC1OUT2, RX/DT, SCK/SCL (alternate locations) and ICSPDAT programming data I/O.
18 RE3/MCLR/VPP input Input-only pin that also serves as Master Clear (ST, internal weak pull-up) and the high-voltage VPP programming input.
19 RA0 bidirectional PORTA I/O shared with AN0 and C1IN0-/C2IN0-/C3IN0-/C4IN0-.
20 RA1 bidirectional PORTA I/O shared with AN1, C1IN1-/C2IN1-/C3IN1-/C4IN1- and OPA1OUT.
21 RA2 bidirectional PORTA I/O shared with AN2, C1IN0+ to C4IN0+, DAC1OUT1, VREF-/DAC1VREF-.
22 RA3 bidirectional PORTA I/O shared with AN3, VREF+/DAC1VREF+ and C1IN1+.
23 RA4 bidirectional PORTA I/O shared with C1OUT, OPA1IN+ and T0CKI Timer0 clock input.
24 RA5 bidirectional PORTA I/O shared with AN4, C2OUT, OPA1IN- and SS slave select input.
25 RE0 bidirectional PORTE I/O shared with AN5 and CCP3 (alternate location).
26 RE1 bidirectional PORTE I/O shared with AN6 and PSMC3B output.
27 RE2 bidirectional PORTE I/O shared with AN7 and PSMC3A output.
28 VDD power_in Positive supply; 2.3V to 5.5V for PIC16F1784 (1.8V to 3.6V for PIC16LF1784).
29 VSS power_in Ground reference.
30 RA7 bidirectional PORTA I/O shared with OSC1 crystal input, CLKIN external clock input and PSMC1CLK/PSMC2CLK/PSMC3CLK inputs.
31 RA6 bidirectional PORTA I/O shared with OSC2 crystal, CLKOUT (FOSC/4), C2OUT (alternate) and VCAP voltage regulator filter capacitor.
32 RC0 bidirectional PORTC I/O shared with T1OSO Timer1 oscillator, T1CKI and PSMC1A output.
33 NC unconnected No connect (per 44-pin TQFP diagram).
34 NC unconnected No connect (per 44-pin TQFP diagram).
35 RC1 bidirectional PORTC I/O shared with T1OSI Timer1 oscillator, PSMC1B output and CCP2.
36 RC2 bidirectional PORTC I/O shared with PSMC1C output and CCP1.
37 RC3 bidirectional PORTC I/O shared with PSMC1D output and SCK/SCL (MSSP).
38 RD0 bidirectional PORTD general purpose I/O shared with OPA3IN+.
39 RD1 bidirectional PORTD I/O shared with AN21, C1IN4-/C2IN4-/C3IN4-/C4IN4- and OPA3OUT.
40 RD2 bidirectional PORTD general purpose I/O shared with OPA3IN-.
41 RD3 bidirectional PORTD general purpose I/O.
42 RC4 bidirectional PORTC I/O shared with PSMC1E output and SDI/SDA (MSSP).
43 RC5 bidirectional PORTC I/O shared with PSMC1F output and SDO (MSSP).
44 RC6 bidirectional PORTC I/O shared with PSMC2A output and TX/CK (EUSART).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TQFP-44(10x10)
Category Single Chip Microcomputer/Microcontroller
Pins 44

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (Fosc ≤ 16 MHz) VDD 2.3 5.5 V FOSC ≤ 16 MHz, PIC16F1784 383
Supply voltage (Fosc ≤ 32 MHz) VDD 2.5 5.5 V FOSC ≤ 32 MHz (Note 2), PIC16F1784 383
Operating ambient temperature (Industrial) TA -40 85 °C Industrial Temperature 381
Voltage on VDD pin VDD -0.3 6.5 V PIC16F1784/6/7, with respect to VSS 380
Voltage on MCLR pin -0.3 9 V with respect to VSS 380
Voltage on all other pins -0.3 V -0.3V to (VDD + 0.3V) 380
Ambient temperature under bias -40 125 °C 380
Storage temperature -65 150 °C 380
Maximum current on VSS pin 340 mA -40°C ≤ TA ≤ +85°C 380
Maximum current on VDD pin 340 mA -40°C ≤ TA ≤ +85°C 380
Maximum current on any I/O pin 25 mA 380
Clamp current IK 20 mA VPIN < 0 or VPIN > VDD 380
RAM data retention voltage VDR 1.7 V Device in Sleep mode 383
Fixed Voltage Reference voltage 1.024V VFVR -4 4 % 1.024V, VDD ≥ 2.5V 383
Fixed Voltage Reference voltage 2.048V VFVR -4 4 % 2.048V, VDD ≥ 2.5V 383
Fixed Voltage Reference voltage 4.096V VFVR -5 5 % 4.096V, VDD ≥ 4.75V 383
VDD rise rate for internal POR SVDD 0.05 V/ms 383
Power-on Reset release voltage VPOR 1.6 V 383
Power-on Reset rearm voltage VPORR 1.5 V Device in Sleep mode 383
Supply current LP mode 32 kHz IDD 18 63 µA VDD=2.3V, FOSC = 32 kHz LP mode, -40°C ≤ TA ≤ +85°C 385
Supply current LP mode 32 kHz IDD 22 79 µA VDD=5.0V, FOSC = 32 kHz LP mode, -40°C ≤ TA ≤ +85°C 385
Supply current XT mode 4 MHz IDD 380 1300 µA VDD=5.0V, FOSC = 4 MHz XT mode 385
Supply current EC medium power 4 MHz IDD 350 1200 µA VDD=5.0V, FOSC = 4 MHz EC medium-power 386
Supply current EC high power 32 MHz IDD 2.2 7.5 mA VDD=5.0V, FOSC = 32 MHz 386
Supply current HFINTOSC 16 MHz IDD 1.4 4.1 mA VDD=5.0V, FOSC = 16 MHz 386
Supply current MFINTOSC 500 kHz IDD 220 430 µA VDD=5.0V, FOSC = 500 kHz 386
Base power-down current IPD 0.3 3 µA VDD=2.3V, WDT, BOR, FVR, T1OSC disabled, max at +85°C 387
Base power-down current IPD 0.5 6 µA VDD=5.0V, WDT, BOR, FVR, T1OSC disabled, max at +85°C 387
Base power-down current VREGPM=0 IPD 12 21 µA VDD=5.0V, VREGPM = 0, max at +85°C 387
Input low voltage TTL buffer VIL 0.8 V 4.5V ≤ VDD ≤ 5.5V 389
Input low voltage Schmitt Trigger VIL 0.2 V 0.2 VDD, 2.0V ≤ VDD ≤ 5.5V 389
Input high voltage TTL buffer VIH 2 V 4.5V ≤ VDD ≤ 5.5V 389
Input leakage current I/O ports IIL -1000 1000 nA VSS ≤ VPIN ≤ VDD, pin at high-impedance, up to 125°C (typ ±5 at 85°C) 389
MCLR input leakage current IIL -200 200 nA VSS ≤ VPIN ≤ VDD @ 85°C 389
Weak pull-up current IPUR 25 100 200 µA VDD = 3.3V, VPIN = VSS 389
Weak pull-up current IPUR 25 140 300 µA VDD = 5.0V, VPIN = VSS 389
Output low voltage I/O ports VOL 0.6 V IOL = 8mA, VDD = 5V; IOL = 6mA, VDD = 3.3V; IOL = 1.8mA, VDD = 1.8V 389
OSC2 capacitive loading COSC2 15 pF In XT, HS and LP modes when external clock is used to drive OSC1 390
I/O pin capacitive loading CIO 50 pF All I/O pins 390
Voltage on MCLR/VPP during programming VIHH 8 9 V (Note 3) 391
HFINTOSC frequency accuracy HFOSC -2 16 2 % 0°C ≤ TA ≤ +60°C, VDD ≥ 2.5V (typ in MHz) 395
HFINTOSC frequency accuracy HFOSC -3 16 3 % 60°C ≤ TA ≤ 85°C, VDD ≥ 2.5V (typ in MHz) 395
Brown-out Reset voltage VBOR 2.55 2.7 2.85 V BORV = 0 399
Brown-out Reset voltage VBOR 2.3 2.45 2.6 V BORV=1 (F device) 399
Low-Power Brown-out voltage VLPBOR 1.8 2.1 2.5 V LPBOR = 1 399
Power-up Timer period TPWRT 40 65 140 ms PWRTE = 0 399
PLL system frequency FSYS 16 32 MHz On-chip VCO system frequency 396
ADC resolution NR 12 bit 402
ADC reference voltage VREF 1.8 V VREF = (VREF+ minus VREF-), max VDD 402
ADC clock period TAD 1 9 µs TOSC-based 402
Comparator input offset voltage VIOFF -9 9 mV Normal-Power mode, VICM = VDD/2, VDD=3.0V, 25°C 404
Op amp offset OFF -9 9 mV VDD = 3.0V, 25°C, High-Power Mode 404
Thermal resistance junction to ambient θJA 46 °C/W 44-pin TQFP package 392
Thermal resistance junction to case θJC 14.5 °C/W 44-pin TQFP package 392
Maximum junction temperature TJMAX 150 °C 392

CAD (KiCad official)

  • Symbol: PIC16F1784-I
  • Footprint: Package_QFP:TQFP-44_10x10mm_P0.8mm
  • 3D model: TQFP-44(10x10) (KiCad packages3D, STEP)
  • 3D model files: pic16f1784-i-etched.step / pic16f1784-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16f1784-i.step / pic16f1784-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (464 pp, sha256 9bfabdf46e588d47, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is PIC16F1784-I/PT. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • PIC16F1784-I/P