main
Ray
Publish 0.1.0
8de6b5b
PIC16F1783T-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28
PIC16F1783T-I from Microchip Tech, in a SSOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE3/MCLR/VPP | input | Input-only pin that carries the MCLR/VPP master clear function and supports interrupt-on-change, per the Table 2 allocation for the 28-pin SPDIP/SOIC/SSOP package. |
| 2 | RA0 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with ADC input AN0+/AN0-, comparator inputs C1IN0-, C2IN0- and C3IN0-. |
| 3 | RA1 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with ADC input AN1+/AN1-, comparator inputs C1IN1-, C2IN1- and C3IN1-, and op amp output OPA1OUT. |
| 4 | RA2 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with ADC input AN2+/AN2-, ADC negative reference VREF-, comparator inputs C1IN0+, C2IN0+ and C3IN0+, and DAC1OUT1/DAC1VREF-. |
| 5 | RA3 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with ADC input AN3+/AN3-, ADC positive reference VREF+ (software-selectable location), comparator input C1IN1+, and DAC1VREF+. |
| 6 | RA4 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with comparator output C1OUT, op amp input OPA1IN+ and Timer0 clock input T0CKI. |
| 7 | RA5 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with ADC input AN4+/AN4-, comparator output C2OUT, op amp input OPA1IN- and SS. |
| 8 | VSS | power_in | Ground reference for the device (one of two VSS pins on the SSOP package, the other being pin 19). |
| 9 | RA7 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with ADC reference VREF+, PSMC1CLK/PSMC2CLK and OSC1/CLKIN oscillator input. |
| 10 | RA6 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with comparator output C2OUT and OSC2/CLKOUT oscillator output. |
| 11 | RC0 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with Timer1 oscillator output T1OSO, Timer1 clock input T1CKI and PSMC1A. |
| 12 | RC1 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with Timer1 oscillator input T1OSI, PSMC1B and CCP2 (software-selectable location). |
| 13 | RC2 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with PSMC1C and CCP1 (software-selectable location). |
| 14 | RC3 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with PSMC1D and MSSP SCK/SCL (software-selectable location). |
| 15 | RC4 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with PSMC1E and MSSP SDI/SDA (software-selectable location). |
| 16 | RC5 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with PSMC1F and MSSP SDO (software-selectable location). |
| 17 | RC6 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with PSMC2A and EUSART TX/CK (software-selectable location). |
| 18 | RC7 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with PSMC2B and EUSART RX/DT (software-selectable location). |
| 19 | VSS | power_in | Ground reference for the device (one of two VSS pins on the SSOP package, the other being pin 8). |
| 20 | VDD | power_in | Positive supply pin; the datasheet gives an operating range of 2.3V to 5.5V for PIC16F1782/1783 and 1.8V to 3.6V for PIC16LF1782/1783. |
| 21 | RB0 | bidirectional | General-purpose I/O with interrupt-on-change, weak pull-up and external INT interrupt, multiplexed with ADC input AN12+/AN12-, comparator input C2IN1+, PSMC1IN/PSMC2IN and CCP1 (software-selectable location). |
| 22 | RB1 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with ADC input AN10+/AN10-, comparator inputs C1IN3-, C2IN3- and C3IN3-, and op amp output OPA2OUT. |
| 23 | RB2 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with ADC input AN8+/AN8-, op amp input OPA2IN- and CLKR. |
| 24 | RB3 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with ADC input AN9+/AN9-, comparator inputs C1IN2-, C2IN2- and C3IN2-, op amp input OPA2IN+ and CCP2 (software-selectable location). |
| 25 | RB4 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with ADC input AN11+/AN11- and comparator input C3IN1+. |
| 26 | RB5 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with ADC input AN13+/AN13-, comparator output C3OUT, Timer1 gate input T1G and SDO (software-selectable location). |
| 27 | RB6 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with EUSART TX/CK, MSSP SDI/SDA (software-selectable location) and ICSPCLK. |
| 28 | RB7 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with DAC1OUT2, EUSART RX/DT, MSSP SCK/SCL (software-selectable location) and ICSPDAT. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range (PIC16F1782/1783, non-LF) | 2.3 | 5.5 | V | 2 | |||
| Operating Speed, clock input (max) | 32 | MHz | DC, 32 MHz clock input | 1 | |||
| Precision internal oscillator frequency tolerance | -1 | 1 | % | Factory calibrated, typical | 2 |
CAD (KiCad official)
- Symbol:
PIC16F1783T-I - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28 (KiCad packages3D, STEP)
- 3D model files:
pic16f1783t-i-etched.step/pic16f1783t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f1783t-i.step/pic16f1783t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (8 pp, sha256
cc0380cabfc01277, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PIC16F1783T-I
**Microchip Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28
PIC16F1783T-I from Microchip Tech, in a SSOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE3/MCLR/VPP | input | Input-only pin that carries the MCLR/VPP master clear function and supports interrupt-on-change, per the Table 2 allocation for the 28-pin SPDIP/SOIC/SSOP package. |
| 2 | RA0 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with ADC input AN0+/AN0-, comparator inputs C1IN0-, C2IN0- and C3IN0-. |
| 3 | RA1 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with ADC input AN1+/AN1-, comparator inputs C1IN1-, C2IN1- and C3IN1-, and op amp output OPA1OUT. |
| 4 | RA2 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with ADC input AN2+/AN2-, ADC negative reference VREF-, comparator inputs C1IN0+, C2IN0+ and C3IN0+, and DAC1OUT1/DAC1VREF-. |
| 5 | RA3 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with ADC input AN3+/AN3-, ADC positive reference VREF+ (software-selectable location), comparator input C1IN1+, and DAC1VREF+. |
| 6 | RA4 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with comparator output C1OUT, op amp input OPA1IN+ and Timer0 clock input T0CKI. |
| 7 | RA5 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with ADC input AN4+/AN4-, comparator output C2OUT, op amp input OPA1IN- and SS. |
| 8 | VSS | power_in | Ground reference for the device (one of two VSS pins on the SSOP package, the other being pin 19). |
| 9 | RA7 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with ADC reference VREF+, PSMC1CLK/PSMC2CLK and OSC1/CLKIN oscillator input. |
| 10 | RA6 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with comparator output C2OUT and OSC2/CLKOUT oscillator output. |
| 11 | RC0 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with Timer1 oscillator output T1OSO, Timer1 clock input T1CKI and PSMC1A. |
| 12 | RC1 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with Timer1 oscillator input T1OSI, PSMC1B and CCP2 (software-selectable location). |
| 13 | RC2 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with PSMC1C and CCP1 (software-selectable location). |
| 14 | RC3 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with PSMC1D and MSSP SCK/SCL (software-selectable location). |
| 15 | RC4 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with PSMC1E and MSSP SDI/SDA (software-selectable location). |
| 16 | RC5 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with PSMC1F and MSSP SDO (software-selectable location). |
| 17 | RC6 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with PSMC2A and EUSART TX/CK (software-selectable location). |
| 18 | RC7 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with PSMC2B and EUSART RX/DT (software-selectable location). |
| 19 | VSS | power_in | Ground reference for the device (one of two VSS pins on the SSOP package, the other being pin 8). |
| 20 | VDD | power_in | Positive supply pin; the datasheet gives an operating range of 2.3V to 5.5V for PIC16F1782/1783 and 1.8V to 3.6V for PIC16LF1782/1783. |
| 21 | RB0 | bidirectional | General-purpose I/O with interrupt-on-change, weak pull-up and external INT interrupt, multiplexed with ADC input AN12+/AN12-, comparator input C2IN1+, PSMC1IN/PSMC2IN and CCP1 (software-selectable location). |
| 22 | RB1 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with ADC input AN10+/AN10-, comparator inputs C1IN3-, C2IN3- and C3IN3-, and op amp output OPA2OUT. |
| 23 | RB2 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with ADC input AN8+/AN8-, op amp input OPA2IN- and CLKR. |
| 24 | RB3 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with ADC input AN9+/AN9-, comparator inputs C1IN2-, C2IN2- and C3IN2-, op amp input OPA2IN+ and CCP2 (software-selectable location). |
| 25 | RB4 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with ADC input AN11+/AN11- and comparator input C3IN1+. |
| 26 | RB5 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with ADC input AN13+/AN13-, comparator output C3OUT, Timer1 gate input T1G and SDO (software-selectable location). |
| 27 | RB6 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with EUSART TX/CK, MSSP SDI/SDA (software-selectable location) and ICSPCLK. |
| 28 | RB7 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up, multiplexed with DAC1OUT2, EUSART RX/DT, MSSP SCK/SCL (software-selectable location) and ICSPDAT. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range (PIC16F1782/1783, non-LF) | | 2.3 | | 5.5 | V | | 2 |
| Operating Speed, clock input (max) | | | | 32 | MHz | DC, 32 MHz clock input | 1 |
| Precision internal oscillator frequency tolerance | | -1 | | 1 | % | Factory calibrated, typical | 2 |
## CAD (KiCad official)
- Symbol: `PIC16F1783T-I`
- Footprint: `Package_SO:SSOP-28_5.3x10.2mm_P0.65mm`
- 3D model: SSOP-28 (KiCad packages3D, STEP)
- 3D model files: `pic16f1783t-i-etched.step` / `pic16f1783t-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic16f1783t-i.step` / `pic16f1783t-i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/41410B.pdf) (8 pp, sha256 `cc0380cabfc01277`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic16f1783t-i-datasheet.pdf)