Generated by kicad-footprint-generator · KiCad file format 20260206
PIC16F1769-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · PDIP-20
PIC16F1769-I from Microchip Tech, in a PDIP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply pin; the device operates from 2.3V to 5.5V for PIC16F1764/5/8/9 and from 1.8V to 3.6V for PIC16LF parts. |
| 2 | RA5 | bidirectional | PORTA general purpose I/O with multiplexed Timer1 clock input (T1CKI), Timer2 input, CLC input 3, SOSCI and OSC1/CLKIN functions. |
| 3 | RA4 | bidirectional | PORTA general purpose I/O with ADC channel 3 input (AN3), Timer1 gate input, SOSCO and OSC2/CLKOUT functions. |
| 4 | RA3 | input | General purpose input only (no output driver) that doubles as the MCLR master clear input and VPP programming enable pin. |
| 5 | RC5 | bidirectional | PORTC general purpose I/O with high-current drive capability up to 100 mA, plus CCP1 capture input and EUSART receive (RX) functions. |
| 6 | RC4 | bidirectional | PORTC general purpose I/O with high-current drive capability up to 100 mA, plus Timer3 gate input and EUSART clock (CK) functions. |
| 7 | RC3 | bidirectional | PORTC general purpose I/O with ADC channel 7 input (AN7), comparator inputs, Timer5 gate and CCP2 capture functions. |
| 8 | RC6 | bidirectional | PORTC general purpose I/O with ADC channel 8 input (AN8), op amp 2 inverting input and SPI slave select (SS) functions. |
| 9 | RC7 | bidirectional | PORTC general purpose I/O with ADC channel 9 input (AN9) and op amp 2 noninverting input functions. |
| 10 | RB7 | bidirectional | PORTB general purpose I/O with comparator 2 and 4 positive inputs and EUSART clock (CK) functions. |
| 11 | RB6 | bidirectional | PORTB general purpose I/O with comparator 1 and 3 positive inputs and SPI clock (SCK) / I2C clock (SCL) functions. |
| 12 | RB5 | bidirectional | PORTB general purpose I/O with ADC channel 11 input (AN11), op amp 1 noninverting input and EUSART receive (RX) functions. |
| 13 | RB4 | bidirectional | PORTB general purpose I/O with ADC channel 10 input (AN10), op amp 1 inverting input and SPI data input / I2C data (SDI/SDA) functions. |
| 14 | RC2 | bidirectional | PORTC general purpose I/O with ADC channel 6 input (AN6), op amp 1 and op amp 2 input/output functions, and PRG1IN0/PRG2IN1 ramp generator inputs. |
| 15 | RC1 | bidirectional | PORTC general purpose I/O with ADC channel 5 input (AN5), comparator 1 to 4 negative inputs, Timer4 input and CLC input 2. |
| 16 | RC0 | bidirectional | PORTC general purpose I/O with ADC channel 4 input (AN4), comparator 2 and 4 positive inputs and Timer5 clock input (T5CKI). |
| 17 | RA2 | bidirectional | PORTA general purpose I/O with ADC channel 2 input (AN2), zero-cross detector input (ZCD), Timer0 clock input, COG1/COG2 inputs and external interrupt (INT). |
| 18 | RA1 | bidirectional | PORTA general purpose I/O with ADC channel 1 input (AN1), comparator 1 to 4 negative inputs, VREF+ and ICSP clock (ICSPCLK) functions. |
| 19 | RA0 | bidirectional | PORTA general purpose I/O with ADC channel 0 input (AN0), comparator 1 positive input, VREF- and ICSP data (ICSPDAT) functions. |
| 20 | VSS | power_in | Ground reference pin for the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | PDIP-20 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | 2.3 | 5.5 | V | PIC16F1764/5/8/9, FOSC ≤ 16 MHz | 482 | |
| Supply voltage | VDD | 2.5 | 5.5 | V | FOSC > 16 MHz (Note 2) | 482 | |
| Operating ambient temperature, industrial | TA | -40 | 85 | °C | Industrial temperature | 482 | |
| Ambient temperature under bias | TA | -40 | 125 | °C | 481 | ||
| Storage temperature | TSTG | -65 | 150 | °C | 481 | ||
| Voltage on VDD pin with respect to VSS | VDD | -0.3 | 6.5 | V | PIC16F1764/5/8/9 | 481 | |
| Voltage on MCLR pin with respect to VSS | VMCLR | -0.3 | 9 | V | on MCLR pin | 481 | |
| Voltage on all other pins with respect to VSS | -0.3 | V | on all other pins, maximum (VDD + 0.3V) | 481 | |||
| Maximum current on VSS pin | 250 | mA | -40°C ≤ TA ≤ +85°C | 481 | |||
| Maximum current on VSS pin | 85 | mA | +85°C ≤ TA ≤ +125°C | 481 | |||
| Maximum current on VDD pin | 250 | mA | -40°C ≤ TA ≤ +85°C | 481 | |||
| Maximum current on VDD pin | 85 | mA | +85°C ≤ TA ≤ +125°C | 481 | |||
| Sunk by any standard I/O pin | 50 | mA | 481 | ||||
| Sourced by any standard I/O pin | 50 | mA | 481 | ||||
| Sunk by any high-current I/O pin | 100 | mA | 481 | ||||
| Sourced by any high-current I/O pin | 100 | mA | 481 | ||||
| Clamp current | IK | 20 | mA | VPIN < 0 or VPIN > VDD | 481 | ||
| Maximum junction temperature | TJMAX | 150 | °C | 493 | |||
| VDD rise rate | SVDD | 0.05 | V/ms | Ensures that the Power-on Reset signal is released properly | 484 | ||
| RAM data retention voltage | VDR | 1.7 | V | Device in Sleep mode | 484 | ||
| Fixed Voltage Reference voltage tolerance | VFVR | -4 | 4 | % | 1x gain, 1.024V, VDD ≥ 2.5V, -40°C to +85°C | 484 | |
| Fixed Voltage Reference voltage tolerance | VFVR | -5 | 5 | % | 4x gain, 4.096V, VDD ≥ 4.5V, -40°C to +85°C | 484 | |
| Input low voltage, TTL buffer | VIL | 0.8 | V | with TTL buffer, 4.5V ≤ VDD ≤ 5.5V | 490 | ||
| Input low voltage, standard | VIL | 0.15 | VDD | 1.8V ≤ VDD ≤ 4.5V | 490 | ||
| Input low voltage, Schmitt trigger buffer | VIL | 0.2 | VDD | 2.0V ≤ VDD ≤ 5.5V | 490 | ||
| Input low voltage, I2C levels | VIL | 0.3 | VDD | with I2C levels | 490 | ||
| Input low voltage, SMBus levels | VIL | 0.8 | V | with SMBus levels, 2.7V ≤ VDD ≤ 5.5V | 490 | ||
| Input low voltage, MCLR and OSC1 (EXTRC) | VIL | 0.2 | VDD | MCLR, OSC1 (EXTRC mode) (Note 1) | 490 | ||
| Input low voltage, OSC1 (HS mode) | VIL | 0.3 | VDD | OSC1 (HS mode) | 490 | ||
| Input high voltage, TTL buffer | VIH | 2 | V | 4.5V ≤ VDD ≤ 5.5V | 490 | ||
| Input high voltage, Schmitt trigger buffer | VIH | 0.8 | VDD | 2.0V ≤ VDD ≤ 5.5V | 490 | ||
| Input high voltage, I2C levels | VIH | 0.7 | VDD | with I2C levels | 490 | ||
| Input high voltage, SMBus levels | VIH | 2.1 | V | with SMBus levels, 2.7V ≤ VDD ≤ 5.5V | 490 | ||
| Input high voltage, MCLR | VIH | 0.8 | VDD | MCLR | 490 | ||
| Input high voltage, OSC1 (HS mode) | VIH | 0.7 | VDD | OSC1 (HS mode) | 490 | ||
| Input high voltage, OSC1 (EXTRC oscillator) | VIH | 0.9 | VDD | VDD ≥ 2.0V (Note 1) | 490 | ||
| Input leakage current, I/O ports | IIL | -125 | 5 | 125 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, +85°C | 490 |
| Input leakage current, I/O ports | IIL | -1000 | 5 | 1000 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, +125°C | 490 |
| Input leakage current, MCLR | IIL | -200 | 50 | 200 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, +85°C | 490 |
| Weak pull-up current | IPUR | 25 | 100 | 200 | µA | VDD = 3.3V, VPIN = VSS | 490 |
| Weak pull-up current | IPUR | 25 | 140 | 300 | µA | VDD = 5.0V, VPIN = VSS | 490 |
| Output low voltage, standard I/O | VOL | 0.6 | V | IOL = 8mA, VDD = 5V | 490 | ||
| Output low voltage, high drive I/O | VOL | 0.6 | V | IOH = 10mA, VDD = 2.3V, HIDCx = 1 | 490 | ||
| Capacitive loading, OSC2 pin | COSC2 | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 491 | ||
| Capacitive loading, all I/O pins | CIO | 50 | pF | 491 | |||
| Cell endurance, program flash | EP | 10 | K E/W | -40°C ≤ TA ≤ +85°C (Note 1) | 492 | ||
| High-endurance flash cell endurance | EHEFC | 100 | K E/W | -0°C ≤ TA ≤ +60°C, lower byte last 128 addresses | 492 | ||
| Supply current, HFINTOSC 16 MHz | IDD | 1.5 | 2 | mA | FOSC = 16 MHz, HFINTOSC mode, VDD = 3.0V | 487 | |
| Supply current, HFINTOSC 32 MHz | IDD | 2.9 | 3.8 | mA | FOSC = 32 MHz, HFINTOSC mode, VDD = 3.0V | 487 | |
| Supply current, external clock ECH 32 MHz | IDD | 2.5 | 3.1 | mA | FOSC = 32 MHz, External Clock (ECH), High-Power mode, VDD = 3.0V | 486 | |
| Power-down current, base IPD | IPD | 0.4 | 4 | µA | WDT, BOR, FVR and SOSC disabled, all peripherals inactive, Low-Power Sleep mode, VDD = 3.0V, +85°C | 488 | |
| Power-down current, base IPD | IPD | 0.4 | 12 | µA | WDT, BOR, FVR and SOSC disabled, all peripherals inactive, Low-Power Sleep mode, VDD = 3.0V, +125°C | 488 | |
| Junction to ambient thermal resistance, 20-pin PDIP | JA | 62.2 | °C/W | 20-pin PDIP package | 493 | ||
| Junction to case thermal resistance, 20-pin PDIP | JC | 27.5 | °C/W | 20-pin PDIP package | 493 |
CAD (KiCad official)
- Symbol:
PIC16F1769-I - Footprint:
Package_DIP:DIP-20_W7.62mm - 3D model: PDIP-20 (KiCad packages3D, STEP)
- 3D model files:
pic16f1769-i-etched.step/pic16f1769-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f1769-i.step/pic16f1769-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (568 pp, sha256
c1dccd962d18b881, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).