main
Ray pic16f1718t-i-ml: renamed from pic16f1718t-i, the part it was built from (PIC16F1718T-I/ML); family listed e411eae

PIC16F1718T-I/ML

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-28-EP(6x6)

PIC16F1718T-I from Microchip Tech, in a QFN-28-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RA2 bidirectional Port A bit 2 general-purpose I/O with analog input AN2, voltage reference Vref- and DAC1OUT1 output.
2 RA3 bidirectional Port A bit 3 general-purpose I/O with analog input AN3 and voltage reference Vref+.
3 RA4 bidirectional Port A bit 4 general-purpose I/O with op amp 1 non-inverting input OPA1IN+ and Timer0 clock input T0CKI.
4 RA5 bidirectional Port A bit 5 general-purpose I/O with analog input AN4, op amp 1 inverting input OPA1IN-, DAC2OUT1 output and nSS input.
5 VSS power_in Ground reference for the device (one of two VSS pins on the 28-pin QFN).
6 RA7 bidirectional Port A bit 7 general-purpose I/O, also OSC1/CLKIN external oscillator or clock input and NCOCLK input.
7 RA6 bidirectional Port A bit 6 general-purpose I/O, also OSC2/CLKOUT oscillator output.
8 RC0 bidirectional Port C bit 0 general-purpose I/O with Timer1 clock input T1CKI and secondary oscillator output SOSCO.
9 RC1 bidirectional Port C bit 1 general-purpose I/O with secondary oscillator input SOSCI.
10 RC2 bidirectional Port C bit 2 general-purpose I/O with analog input AN14.
11 RC3 bidirectional Port C bit 3 general-purpose I/O with analog input AN15 and SPI/I2C clock SCK/SCL.
12 RC4 bidirectional Port C bit 4 general-purpose I/O with analog input AN16 and SPI data in/I2C data SDI/SDA.
13 RC5 bidirectional Port C bit 5 general-purpose I/O with analog input AN17.
14 RC6 bidirectional Port C bit 6 general-purpose I/O with analog input AN18.
15 RC7 bidirectional Port C bit 7 general-purpose I/O with analog input AN19.
16 VSS power_in Ground reference for the device (second VSS pin on the 28-pin QFN).
17 VDD power_in Positive supply; 2.3V to 5.5V for PIC16F170X/171X devices.
18 RB0 bidirectional Port B bit 0 general-purpose I/O with analog input AN12, zero-cross detect ZCD and external interrupt INT.
19 RB1 bidirectional Port B bit 1 general-purpose I/O with analog input AN10 and op amp 2 output OPA2OUT.
20 RB2 bidirectional Port B bit 2 general-purpose I/O with analog input AN8 and op amp 2 inverting input OPA2IN-.
21 RB3 bidirectional Port B bit 3 general-purpose I/O with analog input AN9 and op amp 2 non-inverting input OPA2IN+.
22 RB4 bidirectional Port B bit 4 general-purpose I/O with analog input AN11 and interrupt-on-change.
23 RB5 bidirectional Port B bit 5 general-purpose I/O with analog input AN13 and Timer1 gate input T1G.
24 RB6 bidirectional Port B bit 6 general-purpose I/O, also ICSPCLK in-circuit serial programming clock, with SCL and CLCIN2.
25 RB7 bidirectional Port B bit 7 general-purpose I/O, also ICSPDAT in-circuit serial programming data, with DAC1OUT2, DAC2OUT2 and CLCIN3.
26 RE3 input Input-only pin RE3 that functions as MCLR master clear reset and VPP programming voltage input.
27 RA0 bidirectional Port A bit 0 general-purpose I/O with analog input AN0 and CLCIN0.
28 RA1 bidirectional Port A bit 1 general-purpose I/O with analog input AN1, op amp 1 output OPA1OUT and CLCIN1.
29 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package QFN-28-EP(6x6)
Category Single Chip Microcomputer/Microcontroller
Pins 29

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Voltage Range (PIC16F170X/171X) VDD 2.3 5.5 V PIC16F170X/171X 1
Operating Temperature Range, Industrial -40 85 °C Industrial 1
Clock input frequency 0 32 MHz Operating speed, clock input 1
Internal oscillator calibration accuracy -1 1 % 16 MHz internal oscillator block, at calibration 2

CAD (KiCad official)

  • Symbol: PIC16F1718T-I
  • Footprint: Package_DFN_QFN:QFN-28-1EP_6x6mm_P0.65mm_EP4.8x4.8mm
  • 3D model: QFN-28-EP(6x6) (KiCad packages3D, STEP)
  • 3D model files: pic16f1718t-i-etched.step / pic16f1718t-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16f1718t-i.step / pic16f1718t-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (18 pp, sha256 91827b6a20ffbd6f, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is PIC16F1718T-I/ML. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • PIC16F1718T-I/SS