3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPIC16F1579-I/SS
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-20-208mil
PIC16F1579-I from Microchip Tech, in a SSOP-20-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply; the PIC16F1578/9 operating voltage range is 2.3V to 5.5V. |
| 2 | RA5/CLKIN/T1CKI | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up; also serves as CLKIN external clock input (EC mode) and T1CKI Timer1 clock input. |
| 3 | RA4/AN3/T1G/CLKOUT | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up; also serves as AN3 ADC input, T1G Timer1 gate input, and CLKOUT (FOSC/4) output. |
| 4 | RA3/VPP/MCLR | input | Input-only general-purpose pin with interrupt-on-change and weak pull-up; serves as MCLR master clear with internal pull-up when MCLR is enabled, and as VPP high-voltage programming input. |
| 5 | RC5 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up; PPS can route digital peripheral outputs such as PWM, CWG, and comparator outputs to this pin. |
| 6 | RC4/ADCACT | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up; also serves as ADCACT ADC auto-conversion trigger input. |
| 7 | RC3/AN7/C1IN3-/C2IN3- | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up; also serves as AN7 ADC input and C1IN3-/C2IN3- comparator negative inputs. |
| 8 | RC6/AN8 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up; also serves as AN8 ADC input. |
| 9 | RC7/AN9 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up; also serves as AN9 ADC input. |
| 10 | RB7/CK | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up; also serves as CK EUSART synchronous clock input. |
| 11 | RB6 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up. |
| 12 | RB5/AN11/RX | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up; also serves as AN11 ADC input and RX EUSART asynchronous input. |
| 13 | RB4/AN10 | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up; also serves as AN10 ADC input. |
| 14 | RC2/AN6/C1IN2-/C2IN2- | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up; also serves as AN6 ADC input and C1IN2-/C2IN2- comparator negative inputs. |
| 15 | RC1/AN5/C1IN1-/C2IN1- | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up; also serves as AN5 ADC input and C1IN1-/C2IN1- comparator negative inputs. |
| 16 | RC0/AN4/C2IN+ | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up; also serves as AN4 ADC input and C2IN+ comparator positive input. |
| 17 | RA2/AN2/T0CKI/CWG1IN/INT | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up; also serves as AN2 ADC input, T0CKI Timer0 clock input, CWG1IN complementary input, and INT external interrupt. |
| 18 | RA1/AN1/VREF+/C1IN0-/C2IN0-/ICSPCLK | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up; also serves as AN1 ADC input, VREF+ voltage reference input, C1IN0-/C2IN0- comparator negative inputs, and ICSPCLK programming clock. |
| 19 | RA0/AN0/C1IN+/DAC1OUT/ICSPDAT | bidirectional | General-purpose I/O with interrupt-on-change and weak pull-up; also serves as AN0 ADC input, C1IN+ comparator positive input, DAC1OUT digital-to-analog output, and ICSPDAT programming data I/O. |
| 20 | VSS | power_in | Ground reference. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-20-208mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 125 | °C | 274 | |||
| Storage temperature | -65 | 150 | °C | 274 | |||
| Voltage on VDD pin | -0.3 | 6.5 | V | PIC16F1574/5/8/9 (F device) | 274 | ||
| Voltage on MCLR pin | -0.3 | 9 | V | 274 | |||
| Voltage on all other pins | -0.3 | V | Upper limit printed as VDD + 0.3V (not numeric) | 274 | |||
| Maximum current on VSS pin | 250 | mA | -40°C <= TA <= +85°C | 274 | |||
| Maximum current on VSS pin | 85 | mA | +85°C <= TA <= +125°C | 274 | |||
| Maximum current on VDD pin | 250 | mA | -40°C <= TA <= +85°C | 274 | |||
| Maximum current on VDD pin | 85 | mA | +85°C <= TA <= +125°C | 274 | |||
| Sunk by any standard I/O pin | 50 | mA | 274 | ||||
| Sourced by any standard I/O pin | 50 | mA | 274 | ||||
| Clamp current | IK | 20 | mA | VPIN < 0 or VPIN > VDD | 274 | ||
| Operating ambient temperature, industrial (TA_MIN) | TA_MIN | -40 | °C | Industrial temperature range (-I) | 275 | ||
| Operating ambient temperature, industrial (TA_MAX) | TA_MAX | 85 | °C | Industrial temperature range (-I) | 275 | ||
| Supply voltage VDD | VDD | 2.3 | 5.5 | V | FOSC <= 16 MHz | 277 | |
| Supply voltage VDD | VDD | 2.5 | 5.5 | V | FOSC <= 32 MHz (PLL required) | 277 | |
| RAM data retention voltage | VDR | 1.7 | V | Device in Sleep mode | 277 | ||
| VDD rise rate | SVDD | 0.05 | V/ms | Ensures the Power-on Reset signal is released properly | 277 | ||
| FVR gain voltage accuracy for ADC | VADFVR | -4 | 4 | % | 1x VFVR, ADFVR = 01, VDD >= 2.5V | 277 | |
| FVR gain voltage accuracy for ADC | VADFVR | -5 | 5 | % | 4x VFVR, ADFVR = 11, VDD >= 4.75V | 277 | |
| FVR gain voltage accuracy for comparator | VCDAFVR | -4 | 4 | % | 1x VFVR, CDAFVR = 01, VDD >= 2.5V | 277 | |
| FVR gain voltage accuracy for comparator | VCDAFVR | -5 | 5 | % | 4x VFVR, CDAFVR = 11, VDD >= 4.75V | 277 | |
| Base power-down current (Low-Power Sleep, +85°C max) | IPD | 0.3 | 3 | µA | VDD = 2.3V; WDT, BOR, FVR disabled; Low-Power Sleep mode, VREGPM = 1 | 281 | |
| Base power-down current (Low-Power Sleep, +85°C max) | IPD | 0.4 | 4 | µA | VDD = 3.0V; WDT, BOR, FVR disabled; Low-Power Sleep mode, VREGPM = 1 | 281 | |
| Base power-down current (Low-Power Sleep, +85°C max) | IPD | 0.5 | 6 | µA | VDD = 5.0V; WDT, BOR, FVR disabled; Low-Power Sleep mode, VREGPM = 1 | 281 | |
| Supply current IDD (HS-EC medium power, 1 MHz) | IDD | 79 | 107 | µA | VDD = 2.3V; FOSC = 1 MHz, External Clock (ECM), Medium Power mode | 279 | |
| Supply current IDD (EC medium power, 1 MHz) | IDD | 105 | 138 | µA | VDD = 3.0V; FOSC = 1 MHz, External Clock (ECM), Medium Power mode | 279 | |
| Supply current IDD (EC medium power, 1 MHz) | IDD | 151 | 184 | µA | VDD = 5.0V; FOSC = 1 MHz, External Clock (ECM), Medium Power mode | 279 | |
| Supply current IDD (EC medium power, 4 MHz) | IDD | 201 | 255 | µA | VDD = 2.3V; FOSC = 4 MHz, External Clock (ECM), Medium Power mode | 279 | |
| Supply current IDD (EC medium power, 4 MHz) | IDD | 270 | 329 | µA | VDD = 3.0V; FOSC = 4 MHz, External Clock (ECM), Medium Power mode | 279 | |
| Supply current IDD (EC medium power, 4 MHz) | IDD | 344 | 431 | µA | VDD = 5.0V; FOSC = 4 MHz, External Clock (ECM), Medium Power mode | 279 | |
| Supply current IDD (MFINTOSC 500 kHz) | IDD | 166 | 241 | µA | VDD = 2.3V; FOSC = 500 kHz, MFINTOSC | 279 | |
| Supply current IDD (MFINTOSC 500 kHz) | IDD | 187 | 273 | µA | VDD = 3.0V; FOSC = 500 kHz, MFINTOSC | 279 | |
| Supply current IDD (MFINTOSC 500 kHz) | IDD | 249 | 332 | µA | VDD = 5.0V; FOSC = 500 kHz, MFINTOSC | 279 | |
| Supply current IDD (HFINTOSC 8 MHz) | IDD | 0.7 | 1 | mA | VDD = 2.3V; FOSC = 8 MHz, HFINTOSC | 279 | |
| Supply current IDD (HFINTOSC 8 MHz) | IDD | 1 | 1.1 | mA | VDD = 3.0V; FOSC = 8 MHz, HFINTOSC | 279 | |
| Supply current IDD (HFINTOSC 8 MHz) | IDD | 1.1 | 1.2 | mA | VDD = 5.0V; FOSC = 8 MHz, HFINTOSC | 279 | |
| Supply current IDD (HFINTOSC 16 MHz) | IDD | 1.1 | 1.3 | mA | VDD = 2.3V; FOSC = 16 MHz, HFINTOSC | 279 | |
| Supply current IDD (HFINTOSC 16 MHz) | IDD | 1.3 | 1.5 | mA | VDD = 3.0V; FOSC = 16 MHz, HFINTOSC | 279 | |
| Supply current IDD (HFINTOSC 16 MHz) | IDD | 1.5 | 1.8 | mA | VDD = 5.0V; FOSC = 16 MHz, HFINTOSC | 279 | |
| Input low voltage, I/O port with TTL buffer | VIL | 0.8 | V | 4.5V <= VDD <= 5.5V | 283 | ||
| Input high voltage, I/O port with TTL buffer | VIH | 2 | V | 4.5V <= VDD <= 5.5V | 283 | ||
| Input leakage current, I/O ports | IIL | -125 | 5 | 125 | nA | VSS <= VPIN <= VDD, pin at high-impedance, 85°C | 283 |
| Input leakage current, MCLR | IIL | -200 | 50 | 200 | nA | VSS <= VPIN <= VDD, pin at high-impedance, 85°C | 283 |
| Weak pull-up current | IPUR | 25 | 100 | 200 | µA | VDD = 3.3V, VPIN = VSS | 283 |
| Weak pull-up current | IPUR | 25 | 140 | 300 | µA | VDD = 5.0V, VPIN = VSS | 283 |
| Output low voltage, I/O ports | VOL | 0.6 | V | IOL = 6 mA, VDD = 3.3V | 283 | ||
| Capacitive loading on all I/O pins | CIO | 50 | pF | 283 | |||
| External CLKIN frequency | FOSC | 0.5 | MHz | External Clock (ECL); min printed as DC | 287 | ||
| External CLKIN frequency | FOSC | 4 | MHz | External Clock (ECM); min printed as DC | 287 | ||
| External CLKIN frequency | FOSC | 20 | MHz | External Clock (ECH); min printed as DC | 287 | ||
| Internal calibrated HFINTOSC frequency tolerance | HFOSC | -2 | 2 | % | VDD = 3.0V, TA = 25°C (nominal 16.0 MHz) | 288 | |
| Thermal resistance junction to ambient, 20-pin SSOP | JA | 87.3 | °C/W | 20-pin SSOP package | 285 | ||
| Thermal resistance junction to case, 20-pin SSOP | JC | 31.1 | °C/W | 20-pin SSOP package | 285 | ||
| Maximum junction temperature | TJMAX | 150 | °C | 285 |
CAD (KiCad official)
- Symbol:
PIC16F1579-I - Footprint:
Package_SO:SSOP-20_5.3x7.2mm_P0.65mm - 3D model: SSOP-20-208mil (KiCad packages3D, STEP)
- 3D model files:
pic16f1579-i-etched.step/pic16f1579-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f1579-i.step/pic16f1579-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (342 pp, sha256
0edc2c31fced9150, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC16F1579-I/SS. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC16F1579-I/P