main
Ray
Publish 0.1.3
21459b9
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178
{
"slug": "pic16f15313-i-sn",
"version": "0.1.3",
"type": "component",
"description": "Microchip Microcontrollers (MCU/MPU/SOC), SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"mcu",
"pic16f15313-i"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"pic16f15313-i.kicad_sym",
"pic16f15313-i.kicad_mod",
"pic16f15313-i.glb",
"pic16f15313-i.step",
"pic16f15313-i.lbr",
"docs/hero.png",
"docs/pic16f15313-i-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"pic16f15313-i-etched.step",
"pic16f15313-i-etched.glb",
"pic16f15313-i-sn-hero.glb",
"pic16f15313-i-sn-hero.overlay.json"
],
"component": {
"mpn": "PIC16F15313-I/SN",
"manufacturer": "Microchip",
"package": "SOIC-8",
"pin_count": 8,
"category": "Microcontrollers (MCU/MPU/SOC)",
"parts": {
"symbol": "pic16f15313-i.kicad_sym",
"footprint": "pic16f15313-i.kicad_mod",
"model_3d": "pic16f15313-i-sn-hero.glb",
"model_3d_plain": "pic16f15313-i.glb",
"model_3d_step": "pic16f15313-i-etched.step",
"model_3d_step_plain": "pic16f15313-i.step",
"lbr": "pic16f15313-i.lbr"
},
"pins": [
{
"number": "1",
"name": "VDD",
"type": "power_in",
"description": "Positive supply voltage input. 2.3-5.5 V for PIC16F15313 (1.8-3.6 V for PIC16LF15313). Requires a 0.1 uF ceramic decoupling capacitor placed close to the pin."
},
{
"number": "2",
"name": "RA5/OSC1/CLKIN",
"type": "bidirectional",
"description": "General purpose I/O RA5. Multiplexed with ANA5 (ADC ch A5), ADACT (ADC auto-conversion trigger), T1CKI/T2IN clock inputs, CCP1/CCP2 (capture default), CLCIN1, external oscillator input OSC1 (LP/XT/HS modes), external digital clock input CLKIN/EIN, and IOCA5 interrupt-on-change. TTL/ST input, CMOS/OD output. Individually programmable weak pull-up."
},
{
"number": "3",
"name": "RA4/OSC2/CLKOUT",
"type": "bidirectional",
"description": "General purpose I/O RA4. Multiplexed with ANA4 (ADC ch A4), C1IN1- (comparator 1 negative input), T1G (Timer1 gate input), external oscillator driver output OSC2 (LP/XT/HS modes), CLKOUT (FOSC/4 output in non-crystal modes), and IOCA4 interrupt-on-change. TTL/ST input, CMOS/OD output. Individually programmable weak pull-up."
},
{
"number": "4",
"name": "RA3/MCLR/VPP",
"type": "input",
"description": "Multifunction pin. Serves as Master Clear (MCLR) reset input with internal weak pull-up (Schmitt Trigger), high-voltage ICSP programming entry input (VPP), general purpose input RA3 (input-only when MCLR is enabled, CMOS/OD when MCLRE is disabled), MSSP1 SPI slave select SS1, CLCIN0, and IOCA3 interrupt-on-change."
},
{
"number": "5",
"name": "RA2/INT",
"type": "bidirectional",
"description": "General purpose I/O RA2. Multiplexed with ANA2 (ADC ch A2), CWG1IN (Complementary Waveform Generator input), MSSP1 I2C SDA1 (open-drain, I2C logic levels), MSSP1 SPI SDI1 input, ZCD1 zero-cross detect input (constant current sink/source), INT external interrupt request, and IOCA2 interrupt-on-change. TTL/ST input, CMOS/OD output. Individually programmable weak pull-up."
},
{
"number": "6",
"name": "RA1/ICSPCLK",
"type": "bidirectional",
"description": "General purpose I/O RA1. Multiplexed with ANA1 (ADC ch A1), VREF+ (external ADC/DAC positive reference), C1IN0- (comparator 1 negative input), DAC1REF+ (DAC positive reference), T0CKI (Timer0 clock input), SCK1/SCL1 (MSSP1 SPI clock / I2C clock, I2C logic levels), RX1/DT1 (EUSART1 async receive / sync data), CLCIN2, ICSPCLK (In-Circuit Serial Programming clock), and IOCA1 interrupt-on-change. TTL/ST input, CMOS/OD output. Weak pull-up available."
},
{
"number": "7",
"name": "RA0/ICSPDAT",
"type": "bidirectional",
"description": "General purpose I/O RA0. Multiplexed with ANA0 (ADC ch A0), C1IN0+ (comparator 1 positive input), DAC1OUT (5-bit DAC analog output), TX1/CK1 (EUSART1 async transmit / sync clock), CLCIN3, ICSPDAT (In-Circuit Serial Programming data), and IOCA0 interrupt-on-change. TTL/ST input, CMOS/OD output. Weak pull-up available."
},
{
"number": "8",
"name": "VSS",
"type": "power_in",
"description": "Ground reference (0 V) for the device. Must be connected to system ground; a 0.1 uF ceramic decoupling capacitor between VDD and VSS placed close to the pins is required."
}
],
"provenance": {
"rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",
"cad": "KiCad official (CC-BY-SA 4.0)",
"cad_basis": {
"from": [
"README CAD section (factory cad_wording)"
],
"missing": []
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"distributor_links": {
"digikey": false,
"mouser": false
},
"distributor_check": {
"checked_at": "2026-10-05T19:13:39Z",
"source": "Component Ocean /api/assign-pns + lcsc_map",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"models_3d": [
{
"file": "pic16f15313-i.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "pic16f15313-i-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "d473ae1efc5ff1fc84b7cecd06d1f52ae56648be4274d3551386840e9c6e9f7c",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"family": {
"base": "PIC16F15313-I",
"siblings": [
"PIC16F15313-I/RF"
],
"old_slug": "pic16f15313-i",
"note": "renamed from the cut-base slug to the part it was built from (slug collision split, 2026-11-11)"
}
},
"visibility": "public"
}