main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs pic16f15213-e: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pic16f15213-e: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json pic16f15213-e: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
pic16f15213-e-etched.fit.json pic16f15213-e: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
pic16f15213-e-etched.glb pic16f15213-e: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
pic16f15213-e-etched.step pic16f15213-e: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
pic16f15213-e.glb Publish 0.1.0 · Ray
pic16f15213-e.kicad_mod Publish 0.1.0 · Ray
pic16f15213-e.kicad_sym Publish 0.1.0 · Ray
pic16f15213-e.lbr Publish 0.1.0 · Ray
pic16f15213-e.step Publish 0.1.0 · Ray
README.md pic16f15213-e: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

PIC16F15213-E

Microchip Tech · Microcontrollers (MCU/MPU/SOC) · SOIC-8

PIC16F15213-E from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Positive supply voltage. Operating range 1.8 V to 5.5 V. Decouple to VSS with a low-ESR ceramic (typ. 100 nF) placed close to the pin.
2 RA5/ANA5/ADACT/T1CKI/T2IN/CCP1/CCP2/IOCA5/CLKIN bidirectional PORTA bit 5 general-purpose I/O. Muxed functions: ADC analog input ANA5 and external ADC auto-conversion trigger (ADACT), Timer1 clock (T1CKI) and Timer2 external input (T2IN), CCP1/CCP2 capture inputs, Interrupt-on-Change IOCA5, and external clock input (CLKIN) when the external clock oscillator source is selected in configuration.
3 RA4/ANA4/T1G/IOCA4/CLKOUT bidirectional PORTA bit 4 general-purpose I/O. Muxed functions: ADC analog input ANA4, Timer1 gate input (T1G), Interrupt-on-Change IOCA4, and Fosc/4 clock output (CLKOUT) when CLKOUTEN in Configuration Word 1 is enabled.
4 RA3/MCLR/VPP input Input-only pin. Primary function is active-low Master Clear reset (MCLR); also serves as the high-voltage programming supply (VPP) during ICSP. When MCLRE = 0 the pin becomes GPIO input RA3 with Interrupt-on-Change (IOCA3) and MSSP slave-select (SS1) capability. Requires an external pull-up (typ. 10 kΩ) to VDD when configured as MCLR.
5 RA2/ANA2/T0CKI/SDA1/SDI1/IOCA2/INT bidirectional PORTA bit 2 general-purpose I/O. Muxed functions: ADC analog input ANA2, Timer0 clock input (T0CKI), MSSP I2C data (SDA1) or SPI data-in (SDI1), Interrupt-on-Change IOCA2, and external interrupt (INT).
6 RA1/ANA1/VREF+/SCL1/SCK1/RX1/DT1/IOCA1/ICSPCLK bidirectional PORTA bit 1 general-purpose I/O. Muxed functions: ADC analog input ANA1, ADC external positive voltage reference (VREF+), MSSP I2C clock (SCL1) or SPI clock (SCK1), EUSART receive (RX1) / synchronous data (DT1), Interrupt-on-Change IOCA1, and ICSP programming clock (ICSPCLK / ICDCLK).
7 RA0/ANA0/CK1/IOCA0/ICSPDAT bidirectional PORTA bit 0 general-purpose I/O. Muxed functions: ADC analog input ANA0, EUSART synchronous clock (CK1), Interrupt-on-Change IOCA0, and ICSP programming data (ICSPDAT / ICDDAT).
8 VSS power_in Ground / negative supply return. Tie to system ground. On the DFN variant the exposed bottom pad should also be connected to VSS, but it must not be the only VSS connection to the device.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Embedded Processors & Controllers
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • PIC16F15213-ESN
  • PIC16F15213-ET-E/SN
  • PIC16F15213-ET-I/SN
  • PIC16F15213-EP
  • PIC16F15213-ET-E/P
  • PIC16F15213-ET-I/P
  • PIC16F15213-EMF
  • PIC16F15213-ET-E/MF
  • PIC16F15213-ET-I/MF

CAD (KiCad official)

  • Symbol: PIC16F15213-E
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: pic16f15213-e-etched.step / pic16f15213-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16f15213-e.step / pic16f15213-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (None pp, sha256 bb4d298f58b8f271, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF