3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPIC16F1518-I/SO
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil
PIC16F1518-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VPP/MCLR/RE3 | input | MCLR is the master clear input with internal pull-up when MCLRE=1, RE3 is an input-only general purpose pin with weak pull-up, and VPP is the high-voltage programming pin. |
| 2 | RA0 | bidirectional | General purpose I/O with TTL input and CMOS output, also ADC Channel 0 input (AN0) and an alternate SS (Slave Select) input location selectable via APFCON. |
| 3 | RA1 | bidirectional | General purpose I/O with TTL input and CMOS output, also ADC Channel 1 input (AN1). |
| 4 | RA2 | bidirectional | General purpose I/O with TTL input and CMOS output, also ADC Channel 2 input (AN2). |
| 5 | RA3 | bidirectional | General purpose I/O with TTL input and CMOS output, also ADC Channel 3 input (AN3) and ADC positive voltage reference input (VREF+). |
| 6 | RA4 | bidirectional | General purpose I/O with TTL input and CMOS output, also Timer0 clock input (T0CKI, Schmitt Trigger). |
| 7 | RA5 | bidirectional | General purpose I/O with TTL input and CMOS output, also ADC Channel 4 input (AN4), alternate SS input location via APFCON, and VCAP voltage regulator filter capacitor connection on PIC16F devices. |
| 8 | VSS | power_in | Ground reference. |
| 9 | RA7 | bidirectional | General purpose I/O with TTL input and CMOS output, also OSC1 crystal/resonator connection (LP, XT, HS modes) or CLKIN external clock input (EC mode, Schmitt Trigger). |
| 10 | RA6 | bidirectional | General purpose I/O with TTL input and CMOS output, also OSC2 crystal/resonator connection (LP, XT, HS modes) or CLKOUT FOSC/4 output. |
| 11 | RC0 | bidirectional | General purpose I/O with Schmitt Trigger input, also secondary oscillator output (SOSCO) and Timer1 clock input (T1CKI). |
| 12 | RC1 | bidirectional | General purpose I/O with Schmitt Trigger input, also secondary oscillator input (SOSCI) and alternate CCP2 output location selectable via APFCON. |
| 13 | RC2 | bidirectional | General purpose I/O with Schmitt Trigger input, also ADC Channel 14 input (AN14) and Capture/Compare/PWM 1 (CCP1). |
| 14 | RC3 | bidirectional | General purpose I/O with Schmitt Trigger input, also ADC Channel 15 input (AN15), SPI clock (SCK) and I2C clock (SCL, open-drain). |
| 15 | RC4 | bidirectional | General purpose I/O with Schmitt Trigger input, also ADC Channel 16 input (AN16), SPI data input (SDI) and I2C data (SDA, open-drain). |
| 16 | RC5 | bidirectional | General purpose I/O with Schmitt Trigger input, also ADC Channel 17 input (AN17) and SPI data output (SDO, CMOS). |
| 17 | RC6 | bidirectional | General purpose I/O with Schmitt Trigger input, also ADC Channel 18 input (AN18), USART asynchronous transmit (TX) and synchronous clock (CK). |
| 18 | RC7 | bidirectional | General purpose I/O with Schmitt Trigger input, also ADC Channel 19 input (AN19), USART asynchronous receive (RX) and synchronous data (DT). |
| 19 | VSS | power_in | Ground reference. |
| 20 | VDD | power_in | Positive supply. |
| 21 | RB0 | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, also ADC Channel 12 input (AN12) and external interrupt INT (Schmitt Trigger). |
| 22 | RB1 | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, also ADC Channel 10 input (AN10). |
| 23 | RB2 | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, also ADC Channel 8 input (AN8). |
| 24 | RB3 | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, also ADC Channel 9 input (AN9) and alternate CCP2 location selectable via APFCON. |
| 25 | RB4 | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, also ADC Channel 11 input (AN11). |
| 26 | RB5 | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, also ADC Channel 13 input (AN13) and Timer1 gate input (T1G). |
| 27 | RB6 | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, also ICSP in-circuit serial programming clock (ICSPCLK, Schmitt Trigger input). |
| 28 | RB7 | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, also ICSP data I/O (ICSPDAT, Schmitt Trigger input). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-28-300mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply current IDD, FOSC = 32 kHz LP oscillator, 3.0 V | IDD | 13 | 38 | µA | VDD 3.0 V, FOSC = 32 kHz LP oscillator, -40°C to +85°C | 271 | |
| Supply current IDD, FOSC = 32 kHz LP oscillator, 5.0 V | IDD | 14 | 45 | µA | VDD 5.0 V, FOSC = 32 kHz LP oscillator, -40°C to +85°C | 271 | |
| Supply current IDD, FOSC = 1 MHz XT oscillator, 2.3 V | IDD | 92 | 170 | µA | VDD 2.3 V, FOSC = 1 MHz, XT oscillator | 271 | |
| Supply current IDD, FOSC = 1 MHz XT oscillator, 3.0 V | IDD | 140 | 230 | µA | VDD 3.0 V, FOSC = 1 MHz, XT oscillator | 271 | |
| Supply current IDD, FOSC = 1 MHz XT oscillator, 5.0 V | IDD | 170 | 350 | µA | VDD 5.0 V, FOSC = 1 MHz, XT oscillator | 271 | |
| Supply current IDD, FOSC = 4 MHz XT oscillator, 2.3 V | IDD | 190 | 450 | µA | VDD 2.3 V, FOSC = 4 MHz, XT oscillator | 271 | |
| Supply current IDD, FOSC = 4 MHz XT oscillator, 3.0 V | IDD | 310 | 500 | µA | VDD 3.0 V, FOSC = 4 MHz, XT oscillator | 271 | |
| Supply current IDD, FOSC = 500 kHz EC low-power, 2.3 V | IDD | 25 | 40 | µA | VDD 2.3 V, FOSC = 500 kHz, EC oscillator low-power mode | 272 | |
| Supply current IDD, FOSC = 20 MHz EC high-power, 3.0 V | IDD | 1.4 | 1.5 | mA | VDD 3.0 V, FOSC = 20 MHz, EC oscillator high-power mode | 272 | |
| Supply current IDD, FOSC = 20 MHz EC high-power, 5.0 V | IDD | 1.7 | 2 | mA | VDD 5.0 V, FOSC = 20 MHz, EC oscillator high-power mode | 272 | |
| Supply current IDD, LFINTOSC 31 kHz, 2.3 V | IDD | 18 | 25 | µA | VDD 2.3 V, FOSC = 31 kHz LFINTOSC, -40°C to +85°C | 272 | |
| Supply current IDD, LFINTOSC 31 kHz, 3.0 V | IDD | 24 | 35 | µA | VDD 3.0 V, FOSC = 31 kHz LFINTOSC, -40°C to +85°C | 272 | |
| Supply current IDD, LFINTOSC 31 kHz, 5.0 V | IDD | 25 | 40 | µA | VDD 5.0 V, FOSC = 31 kHz LFINTOSC | 272 | |
| Supply current IDD, HFINTOSC 500 kHz, 2.3 V | IDD | 150 | 330 | µA | VDD 2.3 V, FOSC = 500 kHz, HFINTOSC | 272 | |
| Supply current IDD, HFINTOSC 500 kHz, 3.0 V | IDD | 210 | 360 | µA | VDD 3.0 V, FOSC = 500 kHz, HFINTOSC | 272 | |
| Supply current IDD, HFINTOSC 500 kHz, 5.0 V | IDD | 335 | 400 | µA | VDD 5.0 V, FOSC = 500 kHz, HFINTOSC | 272 | |
| Supply current IDD, HFINTOSC 8 MHz, 2.3 V | IDD | 0.35 | 0.75 | mA | VDD 2.3 V, FOSC = 8 MHz, HFINTOSC | 272 | |
| Supply current IDD, HFINTOSC 8 MHz, 3.0 V | IDD | 0.69 | 1 | mA | VDD 3.0 V, FOSC = 8 MHz, HFINTOSC | 272 | |
| Supply current IDD, HFINTOSC 8 MHz, 5.0 V | IDD | 0.75 | 1.1 | mA | VDD 5.0 V, FOSC = 8 MHz, HFINTOSC | 272 | |
| Supply current IDD, HFINTOSC 16 MHz, 2.3 V | IDD | 0.7 | 1.3 | mA | VDD 2.3 V, FOSC = 16 MHz, HFINTOSC | 272 | |
| Supply current IDD, HFINTOSC 16 MHz, 3.0 V | IDD | 1 | 1.5 | mA | VDD 3.0 V, FOSC = 16 MHz, HFINTOSC | 272 | |
| Supply current IDD, HFINTOSC 16 MHz, 5.0 V | IDD | 1.2 | 1.7 | mA | VDD 5.0 V, FOSC = 16 MHz, HFINTOSC | 272 | |
| Supply current IDD, HS oscillator 20 MHz, 3.0 V | IDD | 1.4 | 1.7 | mA | VDD 3.0 V, FOSC = 20 MHz, HS oscillator | 273 | |
| Supply current IDD, HS oscillator 20 MHz, 5.0 V | IDD | 1.7 | 2.1 | mA | VDD 5.0 V, FOSC = 20 MHz, HS oscillator | 273 | |
| Supply current IDD, EXTRC 4 MHz, 2.3 V | IDD | 165 | 330 | µA | VDD 2.3 V, FOSC = 4 MHz, EXTRC | 273 | |
| Supply current IDD, EXTRC 4 MHz, 3.0 V | IDD | 280 | 420 | µA | VDD 3.0 V, FOSC = 4 MHz, EXTRC | 273 | |
| Supply current IDD, EXTRC 4 MHz, 5.0 V | IDD | 350 | 500 | µA | VDD 5.0 V, FOSC = 4 MHz, EXTRC | 273 | |
| Ambient temperature under bias | -40 | 125 | °C | Under bias | 265 | ||
| Storage temperature | -65 | 150 | °C | 265 | |||
| Voltage on VDD with respect to VSS (PIC16F1516/7/8/9) | VDD | -0.3 | 6.5 | V | With respect to VSS | 265 | |
| Voltage on MCLR with respect to VSS | -0.3 | 9 | V | With respect to VSS | 265 | ||
| Voltage on all other pins with respect to VSS | -0.3 | V | Maximum is VDD + 0.3V (not a fixed number) | 265 | |||
| Maximum current on VSS pin, 28-pin devices | 350 | mA | -40°C ≤ TA ≤ +85°C | 265 | |||
| Maximum current on VSS pin, 28-pin devices | 120 | mA | +85°C ≤ TA ≤ +125°C | 265 | |||
| Maximum current on VDD pin, 28-pin devices | 250 | mA | -40°C ≤ TA ≤ +85°C | 265 | |||
| Maximum current on VDD pin, 28-pin devices | 85 | mA | +85°C ≤ TA ≤ +125°C | 265 | |||
| Clamp current, IK | IK | 20 | mA | VPIN < 0 or VPIN > VDD | 265 | ||
| Maximum output current sunk by any I/O pin | 50 | mA | 265 | ||||
| Maximum output current sourced by any I/O pin | 50 | mA | 265 | ||||
| Operating ambient temperature, industrial | TA | -40 | 85 | °C | Industrial temperature range | 266 | |
| Operating supply voltage VDD, FOSC ≤ 16 MHz | VDD | 2.3 | 5.5 | V | FOSC ≤ 16 MHz | 269 | |
| Operating supply voltage VDD, 16 MHz < FOSC ≤ 20 MHz | VDD | 2.5 | 5.5 | V | 16 MHz < FOSC ≤ 20 MHz | 269 | |
| RAM data retention voltage | VDR | 1.7 | V | Device in Sleep mode | 269 | ||
| Power-on Reset release voltage | VPOR | 1.6 | V | 269 | |||
| Power-on Reset rearm voltage | VPORR | 1.42 | V | 269 | |||
| Fixed Voltage Reference voltage for ADC tolerance | VADFVR | -8 | 6 | % | 1.024V, VDD ≥ 2.5V; 2.048V, VDD ≥ 2.5V; 4.096V, VDD ≥ 4.75V | 269 | |
| VDD rise rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | See Section 6.1 | 269 | ||
| Brown-out Reset voltage, BORV = 0 | VBOR | 2.55 | 2.7 | 2.85 | V | BORV = 0 | 285 |
| Brown-out Reset voltage, BORV = 1 (PIC16F1516/7/8/9) | VBOR | 2.35 | 2.45 | 2.58 | V | BORV = 1 (PIC16F1516/7/8/9) | 285 |
| Thermal resistance junction to ambient, 28-pin SOIC | θJA | 69.7 | °C/W | 28-pin SOIC package | 279 | ||
| Maximum junction temperature | TJMAX | 150 | °C | 279 |
CAD (KiCad official)
- Symbol:
PIC16F1518-I - Footprint:
Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm - 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files:
pic16f1518-i-etched.step/pic16f1518-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f1518-i.step/pic16f1518-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (359 pp, sha256
36ecb0635584b704, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC16F1518-I/SO. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC16F1518-I/MV
- PIC16F1518-I/SP