3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC16F1516T-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil
PIC16F1516T-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE3/MCLR/VPP | input | Input-only RE3 port pin with weak pull-up, also Master Clear (MCLR) reset input with internal pull-up and high-voltage programming input VPP. |
| 2 | RA0/AN0/SS | bidirectional | General purpose I/O with ADC channel 0 input and alternate-location SPI Slave Select input (selected via APFCON). |
| 3 | RA1/AN1 | bidirectional | General purpose I/O with ADC channel 1 input. |
| 4 | RA2/AN2 | bidirectional | General purpose I/O with ADC channel 2 input. |
| 5 | RA3/AN3/VREF+ | bidirectional | General purpose I/O with ADC channel 3 input and ADC positive voltage reference input. |
| 6 | RA4/T0CKI | bidirectional | General purpose I/O with Timer0 clock input. |
| 7 | RA5/AN4/SS/VCAP | bidirectional | General purpose I/O with ADC channel 4 input, default-location SPI Slave Select input, and voltage regulator filter capacitor pin VCAP (PIC16F1516 only). |
| 8 | VSS | power_in | Ground reference. |
| 9 | RA7/OSC1/CLKIN | bidirectional | General purpose I/O, crystal/resonator OSC1 connection (LP, XT, HS modes) or external clock input CLKIN (EC mode). |
| 10 | RA6/OSC2/CLKOUT | bidirectional | General purpose I/O, crystal/resonator OSC2 connection (LP, XT, HS modes) or FOSC/4 clock output CLKOUT. |
| 11 | RC0/SOSCO/T1CKI | bidirectional | General purpose I/O with secondary oscillator connection SOSCO and Timer1 clock input. |
| 12 | RC1/SOSCI/CCP2 | bidirectional | General purpose I/O with secondary oscillator connection SOSCI and default-location Capture/Compare/PWM 2. |
| 13 | RC2/AN14/CCP1 | bidirectional | General purpose I/O with ADC channel 14 input and Capture/Compare/PWM 1. |
| 14 | RC3/AN15/SCK/SCL | bidirectional | General purpose I/O with ADC channel 15 input, SPI clock and I2C clock (open-drain). |
| 15 | RC4/AN16/SDI/SDA | bidirectional | General purpose I/O with ADC channel 16 input, SPI data input and I2C data input/output (open-drain). |
| 16 | RC5/AN17/SDO | bidirectional | General purpose I/O with ADC channel 17 input and SPI data output. |
| 17 | RC6/AN18/TX/CK | bidirectional | General purpose I/O with ADC channel 18 input, USART asynchronous transmit and USART synchronous clock. |
| 18 | RC7/AN19/RX/DT | bidirectional | General purpose I/O with ADC channel 19 input, USART asynchronous receive input and USART synchronous data. |
| 19 | VSS | power_in | Ground reference. |
| 20 | VDD | power_in | Positive supply; 2.3V-5.5V for PIC16F1516. |
| 21 | RB0/AN12/INT | bidirectional | General purpose I/O with IOC and weak pull-up, ADC channel 12 input and external interrupt input. |
| 22 | RB1/AN10 | bidirectional | General purpose I/O with IOC and weak pull-up, and ADC channel 10 input. |
| 23 | RB2/AN8 | bidirectional | General purpose I/O with IOC and weak pull-up, and ADC channel 8 input. |
| 24 | RB3/AN9/CCP2 | bidirectional | General purpose I/O with IOC and weak pull-up, ADC channel 9 input and alternate-location Capture/Compare/PWM 2. |
| 25 | RB4/AN11 | bidirectional | General purpose I/O with IOC and weak pull-up, and ADC channel 11 input. |
| 26 | RB5/AN13/T1G | bidirectional | General purpose I/O with IOC and weak pull-up, ADC channel 13 input and Timer1 gate input. |
| 27 | RB6/ICSPCLK | bidirectional | General purpose I/O with IOC and weak pull-up, also ICSP programming clock. |
| 28 | RB7/ICSPDAT | bidirectional | General purpose I/O with IOC and weak pull-up, also ICSP data I/O. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (FOSC ≤ 16 MHz) | VDD | 2.3 | 5.5 | V | FOSC ≤ 16 MHz | 269 | |
| Supply Voltage (16 MHz < FOSC ≤ 20 MHz) | VDD | 2.5 | 5.5 | V | FOSC ≤ 20 MHz | 269 | |
| RAM Data Retention Voltage | VDR | 1.7 | V | Device in Sleep mode | 269 | ||
| FVR Voltage for ADC | VADFVR | -8 | 6 | % | 1.024V, VDD ≥ 2.5V; 2.048V, VDD ≥ 2.5V; 4.096V, VDD ≥ 4.75V | 269 | |
| VDD Rise Rate | SVDD | 0.05 | V/ms | to ensure internal Power-on Reset signal | 269 | ||
| Power-on Reset Release Voltage | VPOR | 1.6 | V | 269 | |||
| Power-on Reset Rearm Voltage | VPORR | 1.42 | V | 269 | |||
| Operating Ambient Temperature (Industrial) | TA | -40 | 85 | °C | Industrial Temperature | 266 | |
| Ambient temperature under bias | -40 | 125 | °C | 265 | |||
| Storage temperature | -65 | 150 | °C | 265 | |||
| Voltage on VDD with respect to VSS | VDD | -0.3 | 6.5 | V | PIC16F1516/7/8/9 | 265 | |
| Voltage on MCLR with respect to VSS | -0.3 | 9 | V | 265 | |||
| Maximum current on VSS pin, 28-pin | 350 | mA | -40°C ≤ TA ≤ +85°C | 265 | |||
| Maximum current on VSS pin, 28-pin | 120 | mA | +85°C ≤ TA ≤ +125°C | 265 | |||
| Maximum current on VDD pin, 28-pin | 250 | mA | -40°C ≤ TA ≤ +85°C | 265 | |||
| Maximum current on VDD pin, 28-pin | 85 | mA | +85°C ≤ TA ≤ +125°C | 265 | |||
| Clamp current | IK | 20 | mA | VPIN < 0 or VPIN > VDD | 265 | ||
| Maximum output current sunk by any I/O pin | 50 | mA | 265 | ||||
| Maximum output current sourced by any I/O pin | 50 | mA | 265 | ||||
| Supply Current, LP oscillator 32 kHz | IDD | 13 | 38 | µA | VDD = 3.0V, FOSC = 32 kHz LP Oscillator, -40°C ≤ TA ≤ +85°C | 271 | |
| Supply Current, XT oscillator 1 MHz | IDD | 140 | 230 | µA | VDD = 3.0V, FOSC = 1 MHz XT Oscillator | 271 | |
| Supply Current, EC high-power 20 MHz | IDD | 1.7 | 2 | mA | VDD = 5.0V, FOSC = 20 MHz EC Oscillator High-Power mode | 272 | |
| Supply Current, HFINTOSC 16 MHz | IDD | 1.2 | 1.7 | mA | VDD = 5.0V, FOSC = 16 MHz HFINTOSC | 272 | |
| Supply Current, HS oscillator 20 MHz | IDD | 1.7 | 2.1 | mA | VDD = 5.0V, FOSC = 20 MHz HS Oscillator | 273 | |
| Base Power-down Current (+85°C) | IPD | 0.3 | 4 | µA | VDD = 3.0V, WDT, BOR, FVR, and SOSC disabled, all Peripherals Inactive, Low-power regulator active; max at +85°C | 274 | |
| Base Power-down Current (+125°C) | IPD | 0.3 | 12 | µA | VDD = 3.0V, WDT, BOR, FVR, and SOSC disabled, all Peripherals Inactive, Low-power regulator active; max at +125°C | 274 | |
| Base Power-down Current (+85°C) | IPD | 0.47 | 6 | µA | VDD = 5.0V, WDT, BOR, FVR, and SOSC disabled, all Peripherals Inactive, Low-power regulator active; max at +85°C | 274 | |
| LPWDT Current | IPD | 0.77 | 7 | µA | VDD = 3.0V, LPWDT Current (Note 1); max at +85°C | 274 | |
| Input Low Voltage, TTL buffer | VIL | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 276 | ||
| Input Low Voltage, SMBus levels | VIL | 0.8 | V | 2.7V ≤ VDD ≤ 5.5V | 276 | ||
| Input High Voltage, TTL buffer | VIH | 2 | V | 4.5V ≤ VDD ≤ 5.5V | 276 | ||
| Input High Voltage, SMBus levels | VIH | 2.1 | V | 2.7V ≤ VDD ≤ 5.5V | 276 | ||
| Input Leakage Current, I/O ports (85°C) | IIL | 5 | 125 | nA | VSS ≤ VPIN ≤ VDD, Pin at high-impedance at 85°C | 276 | |
| Input Leakage Current, I/O ports (125°C) | IIL | 5 | 1000 | nA | VSS ≤ VPIN ≤ VDD, Pin at high-impedance at 125°C | 276 | |
| Input Leakage Current, MCLR | IIL | 50 | 200 | nA | VSS ≤ VPIN ≤ VDD at 85°C | 276 | |
| Weak Pull-up Current | IPUR | 25 | 100 | 200 | µA | VDD = 3.3V, VPIN = VSS | 276 |
| Weak Pull-up Current | IPUR | 25 | 140 | 300 | µA | VDD = 5.0V, VPIN = VSS | 276 |
| Output Low Voltage, I/O ports | VOL | 0.6 | V | IOL = 8 mA, VDD = 5V; IOL = 6 mA, VDD = 3.3V; IOL = 1.8 mA, VDD = 1.8V | 276 | ||
| OSC2 pin capacitive loading | COSC2 | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 277 | ||
| All I/O pins capacitive loading | CIO | 50 | pF | 277 | |||
| Voltage on MCLR/VPP pin | VIHH | 8 | 9 | V | (Note 2) | 278 | |
| Supply Current during Programming | IDDP | 10 | mA | 278 | |||
| Self-timed Write Cycle Time | TIW | 2 | 2.5 | ms | 278 | ||
| Characteristic Retention | TRETD | 40 | Year | Provided no other specifications are violated | 278 | ||
| Thermal Resistance Junction to Ambient | θJA | 71 | °C/W | 28-pin SSOP package | 279 | ||
| Thermal Resistance Junction to Case | θJC | 24 | °C/W | 28-pin SSOP package | 279 | ||
| Maximum Junction Temperature | TJMAX | 150 | °C | 279 | |||
| HFINTOSC Frequency | HFOSC | 16 | MHz | VDD = 3.0V at +25°C (Note 2); Freq. Tolerance 6.5% | 282 | ||
| Brown-out Reset Voltage | VBOR | 2.55 | 2.7 | 2.85 | V | BORV = 0 | 285 |
| Brown-out Reset Voltage | VBOR | 2.35 | 2.45 | 2.58 | V | BORV = 1 (PIC16F1516/7/8/9) | 285 |
| Low-Power Brown-out Reset Voltage | VLPBOR | 1.8 | 2.1 | 2.5 | V | LPBOR = 0 | 285 |
| Power-up Timer Period | TPWRT | 40 | 65 | 140 | ms | PWRTE = 0 | 285 |
| ADC Integral Error | EIL | 1 | 1.7 | LSb | VREF = 3.0V | 288 | |
| ADC Offset Error | EOFF | 1 | 2.5 | LSb | VREF = 3.0V | 288 | |
| ADC Reference Voltage | VREF | 1.8 | V | VREF = (VREF+ minus VREF-) | 288 | ||
| LDO Regulation Voltage | LDO01 | 3 | V | 290 |
CAD (KiCad official)
- Symbol:
PIC16F1516T-I - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
pic16f1516t-i-etched.step/pic16f1516t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f1516t-i.step/pic16f1516t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (359 pp, sha256
36ecb0635584b704, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).