component
PIC16C926-I/PT
Public Made by Adomby adom
Microchip Tech Pre-ordered MCUs, TQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
91dd8aa
PIC16C926-I
Microchip Tech · Pre-ordered MCUs · TQFP-64(10x10)
PIC16C926-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RA4/T0CKI | bidirectional | PORTA I/O with Schmitt Trigger input that can also be the Timer0 clock input; output is open drain. |
| 2 | RA5/AN4/SS | bidirectional | PORTA I/O with TTL input that can be the SSP slave select or analog input 4. |
| 3 | RB1 | bidirectional | PORTB bi-directional I/O with TTL input and software-programmable weak pull-up. |
| 4 | RB0/INT | bidirectional | PORTB I/O with TTL input that can be the external interrupt pin (Schmitt Trigger when used as interrupt). |
| 5 | RC3/SCK/SCL | bidirectional | PORTC I/O with Schmitt Trigger input that can be the synchronous serial clock for SPI and I2C modes. |
| 6 | RC4/SDI/SDA | bidirectional | PORTC I/O with Schmitt Trigger input that can be SPI data in or I2C data I/O. |
| 7 | RC5/SDO | bidirectional | PORTC I/O with Schmitt Trigger input that can be SPI data out. |
| 8 | C1 | passive | LCD voltage generation pin for the charge pump capacitor. |
| 9 | C2 | passive | LCD voltage generation pin for the charge pump capacitor. |
| 10 | VLCD2 | passive | LCD voltage pin; charge pump boosts VLCD1 to VLCD2 = 2*VLCD1. |
| 11 | VLCD3 | passive | LCD voltage pin; charge pump generates VLCD3 = 3*VLCD1, tied internally to VDD when the pump is not operating. |
| 12 | VDD | power_in | Digital power supply. |
| 13 | VSS | power_in | Ground reference. |
| 14 | OSC1/CLKIN | input | Oscillator crystal input or external clock input; Schmitt Trigger in RC mode, CMOS otherwise. |
| 15 | OSC2/CLKOUT | output | Oscillator crystal output; in RC mode outputs CLKOUT at 1/4 the OSC1 frequency, denoting the instruction cycle rate. |
| 16 | RC0/T1OSO/T1CKI | bidirectional | PORTC I/O with Schmitt Trigger input that can be the Timer1 oscillator output or Timer1 clock input. |
| 17 | RC1/T1OSI | bidirectional | PORTC I/O with Schmitt Trigger input that can be the Timer1 oscillator input. |
| 18 | RC2/CCP1 | bidirectional | PORTC I/O with Schmitt Trigger input that can be Capture1 input, Compare1 output or PWM1 output. |
| 19 | VLCD1 | passive | LCD voltage pin, the regulated base voltage feeding the charge pump. |
| 20 | VLCDADJ | passive | LCD voltage generation pin; a variable external resistor to ground adjusts the regulator for LCD contrast. |
| 21 | RD0/SEG00 | bidirectional | PORTD digital I/O with Schmitt Trigger input, shared with LCD Segment Driver 00. |
| 22 | RD1/SEG01 | bidirectional | PORTD digital I/O with Schmitt Trigger input, shared with LCD Segment Driver 01. |
| 23 | RD2/SEG02 | bidirectional | PORTD digital I/O with Schmitt Trigger input, shared with LCD Segment Driver 02. |
| 24 | RD3/SEG03 | bidirectional | PORTD digital I/O with Schmitt Trigger input, shared with LCD Segment Driver 03. |
| 25 | RD4/SEG04 | bidirectional | PORTD digital I/O with Schmitt Trigger input, shared with LCD Segment Driver 04. |
| 26 | RE0/SEG05 | bidirectional | PORTE digital input or LCD Segment Driver 05. |
| 27 | RE1/SEG06 | bidirectional | PORTE digital input or LCD Segment Driver 06. |
| 28 | RE2/SEG07 | bidirectional | PORTE digital input or LCD Segment Driver 07. |
| 29 | RE3/SEG08 | bidirectional | PORTE digital input or LCD Segment Driver 08. |
| 30 | RE4/SEG09 | bidirectional | PORTE digital input or LCD Segment Driver 09. |
| 31 | RE5/SEG10 | bidirectional | PORTE digital input or LCD Segment Driver 10. |
| 32 | RE6/SEG11 | bidirectional | PORTE digital input or LCD Segment Driver 11. |
| 33 | RF0/SEG12 | bidirectional | PORTF digital input or LCD Segment Driver 12. |
| 34 | RF1/SEG13 | bidirectional | PORTF digital input or LCD Segment Driver 13. |
| 35 | RF2/SEG14 | bidirectional | PORTF digital input or LCD Segment Driver 14. |
| 36 | RF3/SEG15 | bidirectional | PORTF digital input or LCD Segment Driver 15. |
| 37 | RF4/SEG16 | bidirectional | PORTF digital input or LCD Segment Driver 16. |
| 38 | RF5/SEG17 | bidirectional | PORTF digital input or LCD Segment Driver 17. |
| 39 | RF6/SEG18 | bidirectional | PORTF digital input or LCD Segment Driver 18. |
| 40 | RF7/SEG19 | bidirectional | PORTF digital input or LCD Segment Driver 19. |
| 41 | RG0/SEG20 | bidirectional | PORTG digital input or LCD Segment Driver 20. |
| 42 | RG1/SEG21 | bidirectional | PORTG digital input or LCD Segment Driver 21. |
| 43 | RG2/SEG22 | bidirectional | PORTG digital input or LCD Segment Driver 22. |
| 44 | RG3/SEG23 | bidirectional | PORTG digital input or LCD Segment Driver 23. |
| 45 | RG4/SEG24 | bidirectional | PORTG digital input or LCD Segment Driver 24. |
| 46 | RG5/SEG25 | bidirectional | PORTG digital input or LCD Segment Driver 25. |
| 47 | RG6/SEG26 | bidirectional | PORTG digital input or LCD Segment Driver 26. |
| 48 | RD5/SEG29/COM3 | bidirectional | Digital input (Schmitt Trigger) shared with LCD Segment Driver 29 or Common Driver 3. |
| 49 | RD6/SEG30/COM2 | bidirectional | Digital input (Schmitt Trigger) shared with LCD Segment Driver 30 or Common Driver 2. |
| 50 | RD7/SEG31/COM1 | bidirectional | Digital input (Schmitt Trigger) shared with LCD Segment Driver 31 or Common Driver 1. |
| 51 | COM0 | output | LCD Common Driver 0. |
| 52 | VDD | power_in | Digital power supply. |
| 53 | RB6 | bidirectional | PORTB I/O with interrupt-on-change; serial programming clock (Schmitt Trigger in Serial Programming mode). |
| 54 | RB7 | bidirectional | PORTB I/O with interrupt-on-change; serial programming data (Schmitt Trigger in Serial Programming mode). |
| 55 | RB5 | bidirectional | PORTB I/O with TTL input and interrupt-on-change. |
| 56 | RB4 | bidirectional | PORTB I/O with TTL input and interrupt-on-change. |
| 57 | MCLR/VPP | input | Active-low Master Clear (Reset) input or programming voltage input, Schmitt Trigger. |
| 58 | RB3 | bidirectional | PORTB bi-directional I/O with TTL input and software-programmable weak pull-up. |
| 59 | RB2 | bidirectional | PORTB bi-directional I/O with TTL input and software-programmable weak pull-up. |
| 60 | RA0/AN0 | bidirectional | PORTA I/O with TTL input that can also be analog input 0. |
| 61 | RA1/AN1 | bidirectional | PORTA I/O with TTL input that can also be analog input 1. |
| 62 | VSS | power_in | Ground reference. |
| 63 | RA2/AN2/VREF- | bidirectional | PORTA I/O with TTL input that can also be analog input 2. |
| 64 | RA3/AN3/VREF+ | bidirectional | PORTA I/O with TTL input that can also be analog input 3 or A/D voltage reference. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -55 | 125 | °C | 139 | |||
| Storage temperature | -65 | 150 | °C | 139 | |||
| Voltage on any pin with respect to VSS | -0.3 | V | except VDD, MCLR, and RA4 | 139 | |||
| Voltage on VDD with respect to VSS | VDD | 0 | 7.5 | V | with respect to VSS | 139 | |
| Voltage on MCLR with respect to VSS | MCLR | 0 | 13.25 | V | with respect to VSS | 139 | |
| Voltage on RA4 with respect to VSS | RA4 | 0 | 8.5 | V | with respect to VSS | 139 | |
| Voltage on VLCD2, VLCD3 with respect to VSS | VLCD2, VLCD3 | 0 | 10 | V | with respect to VSS | 139 | |
| Total power dissipation | PDIS | 1 | W | see Note 1 | 139 | ||
| Input clamp current | IIK | 20 | mA | VI < 0 or VI > VDD | 139 | ||
| Output clamp current | IOK | 20 | mA | VO < 0 or VO > VDD | 139 | ||
| Supply voltage, XT, RC and LP osc configuration | VDD | 4 | 5.5 | V | XT, RC and LP osc configuration | 141 | |
| Supply voltage, HS osc configuration | VDD | 4.5 | 5.5 | V | HS osc configuration | 141 | |
| Brown-out Reset voltage trip point | VBOR | 3.65 | 4.35 | V | BODEN bit set | 141 | |
| VDD rise rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | See Power-on Reset section for details | 141 | ||
| Supply current, XT and RC osc configuration | IDD | 2.7 | 5 | mA | FOSC = 4 MHz, VDD = 5.5V (Note 4) | 141 | |
| Supply current, LP osc configuration | IDD | 35 | 70 | µA | FOSC = 32 kHz, VDD = 4.0V | 141 | |
| Supply current, HS osc configuration | IDD | 7 | 10 | mA | FOSC = 20 MHz, VDD = 5.5V | 141 | |
| Power-down current (SLEEP) | IPD | 1.5 | 21 | µA | VDD = 4.0V | 142 | |
| Watchdog Timer module differential current | IWDT | 9 | 25 | µA | VDD = 4.0V | 142 | |
| LCD voltage generation with internal RC osc enabled | ILCDT1 | 40 | 55 | µA | VDD = 4.0V (Note 7) | 142 | |
| Brown-out Reset module differential current | IBOR | 100 | 150 | µA | BODEN bit set, VDD = 5.0 | 142 | |
| LCD voltage generation with Timer1 @ 32.768 kHz | ILCDT1 | 33 | 60 | µA | VDD = 4.0V (Note 7) | 142 | |
| Timer1 oscillator current | IT1OSC | 50 | µA | VDD = 4.0V | 143 | ||
| Input low voltage, I/O ports with TTL buffer | VIL | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 144 | ||
| Input high voltage, I/O ports with TTL buffer | VIH | 2 | V | 4.5V ≤ VDD ≤ 5.5V | 144 | ||
| PORTB weak pull-up current | IPURB | 50 | 250 | 400 | µA | VDD = 5V, VPIN = VSS | 144 |
| Input leakage current, I/O ports | IIL | 1 | µA | Vss ≤ VPIN ≤ VDD, pin at hi-Z | 144 | ||
| Input leakage current, MCLR and RA4/T0CKI | IIL | 5 | µA | Vss ≤ VPIN ≤ VDD | 144 | ||
| Input leakage current, OSC1 | IIL | 5 | µA | Vss ≤ VPIN ≤ VDD, XT, HS and LP osc configuration | 144 | ||
| Output low voltage, I/O ports | VOL | 0.6 | V | IOL = 4.0 mA, VDD = 4.5V | 144 | ||
| Output low voltage, OSC2/CLKOUT (RC osc mode) | VOL | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V | 144 | ||
| Capacitive loading, OSC2 pin | COSC2 | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 144 | ||
| Capacitive loading, all I/O pins and OSC2 (in RC) | CIO | 50 | pF | All I/O pins and OSC2 (in RC) | 144 | ||
| Capacitive loading, SCL, SDA in I2C mode | CB | 400 | pF | SCL, SDA in I2C mode | 144 | ||
| Open drain high voltage, RA4 pin | VDD | 8.5 | V | RA4 pin | 144 | ||
| LCDRC oscillator frequency | FLCDRC | 5 | 14 | 22 | kHz | VDD = 5V, -40°C to +85°C | 145 |
| LCD output rise time | TrLCD | 200 | µs | COM outputs Cload = 5,000 pF; SEG outputs Cload = 500 pF; VDD = 5.0V, T = 25°C | 145 | ||
| VLCDADJ current VDD rejection | IVADJ/VDD | 0.1 | µA/V | 145 | |||
| VLCDADJ voltage limits | VVADJ | 1 | 2.3 | V | 145 | ||
| A/D resolution | NR | 10 | bits | VREF = VDD = 5.12V, VSS ≤ VAIN ≤ VREF | 157 | ||
| A/D total absolute error | EABS | -1 | 1 | LSb | VREF = VDD = 5.12V, VSS ≤ VAIN ≤ VREF | 157 | |
| A/D integral linearity error | EIL | -1 | 1 | LSb | VREF = VDD = 5.12V, VSS ≤ VAIN ≤ VREF | 157 | |
| A/D differential linearity error | EDL | -1 | 1 | LSb | VREF = VDD = 5.12V, VSS ≤ VAIN ≤ VREF | 157 | |
| A/D full scale error | EFS | -1 | 1 | LSb | VREF = VDD = 5.12V, VSS ≤ VAIN ≤ VREF | 157 | |
| A/D offset error | EOFF | -2 | 2 | LSb | VREF = VDD = 5.12V, VSS ≤ VAIN ≤ VREF | 157 | |
| A/D gain error | EGN | -1 | 1 | LSb | VREF = VDD = 5.12V, VSS ≤ VAIN ≤ VREF | 157 | |
| Recommended impedance of analog voltage source | ZAIN | 10 | kΩ | 157 | |||
| External CLKIN frequency, HS osc mode | FOSC | 20 | MHz | HS osc mode | 147 | ||
| Oscillator frequency, HS osc mode | FOSC | 4 | 20 | MHz | HS osc mode | 147 | |
| Supply voltage RAM data retention | VDR | 1.5 | V | Device in SLEEP mode | 141 | ||
| A/D converter current, A/D on, not converting | IAD | 1 | µA | A/D on, not converting | 143 | ||
| VLCDADJ regulated current output | IVADJ | 10 | µA | 145 | |||
| A/D converter current (VDD) | IAD | 220 | µA | Average current consumption when A/D is on | 157 |
CAD (KiCad official)
- Symbol:
PIC16C926-I - Footprint:
Package_QFP:TQFP-64_10x10mm_P0.5mm - 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
pic16c926-i-pt-etched.step/pic16c926-i-pt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16c926-i-pt.step/pic16c926-i-pt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (180 pp, sha256
ffa9590d0f27fb9d, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PIC16C926-I
**Microchip Tech** · Pre-ordered MCUs · TQFP-64(10x10)
PIC16C926-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RA4/T0CKI | bidirectional | PORTA I/O with Schmitt Trigger input that can also be the Timer0 clock input; output is open drain. |
| 2 | RA5/AN4/SS | bidirectional | PORTA I/O with TTL input that can be the SSP slave select or analog input 4. |
| 3 | RB1 | bidirectional | PORTB bi-directional I/O with TTL input and software-programmable weak pull-up. |
| 4 | RB0/INT | bidirectional | PORTB I/O with TTL input that can be the external interrupt pin (Schmitt Trigger when used as interrupt). |
| 5 | RC3/SCK/SCL | bidirectional | PORTC I/O with Schmitt Trigger input that can be the synchronous serial clock for SPI and I2C modes. |
| 6 | RC4/SDI/SDA | bidirectional | PORTC I/O with Schmitt Trigger input that can be SPI data in or I2C data I/O. |
| 7 | RC5/SDO | bidirectional | PORTC I/O with Schmitt Trigger input that can be SPI data out. |
| 8 | C1 | passive | LCD voltage generation pin for the charge pump capacitor. |
| 9 | C2 | passive | LCD voltage generation pin for the charge pump capacitor. |
| 10 | VLCD2 | passive | LCD voltage pin; charge pump boosts VLCD1 to VLCD2 = 2*VLCD1. |
| 11 | VLCD3 | passive | LCD voltage pin; charge pump generates VLCD3 = 3*VLCD1, tied internally to VDD when the pump is not operating. |
| 12 | VDD | power_in | Digital power supply. |
| 13 | VSS | power_in | Ground reference. |
| 14 | OSC1/CLKIN | input | Oscillator crystal input or external clock input; Schmitt Trigger in RC mode, CMOS otherwise. |
| 15 | OSC2/CLKOUT | output | Oscillator crystal output; in RC mode outputs CLKOUT at 1/4 the OSC1 frequency, denoting the instruction cycle rate. |
| 16 | RC0/T1OSO/T1CKI | bidirectional | PORTC I/O with Schmitt Trigger input that can be the Timer1 oscillator output or Timer1 clock input. |
| 17 | RC1/T1OSI | bidirectional | PORTC I/O with Schmitt Trigger input that can be the Timer1 oscillator input. |
| 18 | RC2/CCP1 | bidirectional | PORTC I/O with Schmitt Trigger input that can be Capture1 input, Compare1 output or PWM1 output. |
| 19 | VLCD1 | passive | LCD voltage pin, the regulated base voltage feeding the charge pump. |
| 20 | VLCDADJ | passive | LCD voltage generation pin; a variable external resistor to ground adjusts the regulator for LCD contrast. |
| 21 | RD0/SEG00 | bidirectional | PORTD digital I/O with Schmitt Trigger input, shared with LCD Segment Driver 00. |
| 22 | RD1/SEG01 | bidirectional | PORTD digital I/O with Schmitt Trigger input, shared with LCD Segment Driver 01. |
| 23 | RD2/SEG02 | bidirectional | PORTD digital I/O with Schmitt Trigger input, shared with LCD Segment Driver 02. |
| 24 | RD3/SEG03 | bidirectional | PORTD digital I/O with Schmitt Trigger input, shared with LCD Segment Driver 03. |
| 25 | RD4/SEG04 | bidirectional | PORTD digital I/O with Schmitt Trigger input, shared with LCD Segment Driver 04. |
| 26 | RE0/SEG05 | bidirectional | PORTE digital input or LCD Segment Driver 05. |
| 27 | RE1/SEG06 | bidirectional | PORTE digital input or LCD Segment Driver 06. |
| 28 | RE2/SEG07 | bidirectional | PORTE digital input or LCD Segment Driver 07. |
| 29 | RE3/SEG08 | bidirectional | PORTE digital input or LCD Segment Driver 08. |
| 30 | RE4/SEG09 | bidirectional | PORTE digital input or LCD Segment Driver 09. |
| 31 | RE5/SEG10 | bidirectional | PORTE digital input or LCD Segment Driver 10. |
| 32 | RE6/SEG11 | bidirectional | PORTE digital input or LCD Segment Driver 11. |
| 33 | RF0/SEG12 | bidirectional | PORTF digital input or LCD Segment Driver 12. |
| 34 | RF1/SEG13 | bidirectional | PORTF digital input or LCD Segment Driver 13. |
| 35 | RF2/SEG14 | bidirectional | PORTF digital input or LCD Segment Driver 14. |
| 36 | RF3/SEG15 | bidirectional | PORTF digital input or LCD Segment Driver 15. |
| 37 | RF4/SEG16 | bidirectional | PORTF digital input or LCD Segment Driver 16. |
| 38 | RF5/SEG17 | bidirectional | PORTF digital input or LCD Segment Driver 17. |
| 39 | RF6/SEG18 | bidirectional | PORTF digital input or LCD Segment Driver 18. |
| 40 | RF7/SEG19 | bidirectional | PORTF digital input or LCD Segment Driver 19. |
| 41 | RG0/SEG20 | bidirectional | PORTG digital input or LCD Segment Driver 20. |
| 42 | RG1/SEG21 | bidirectional | PORTG digital input or LCD Segment Driver 21. |
| 43 | RG2/SEG22 | bidirectional | PORTG digital input or LCD Segment Driver 22. |
| 44 | RG3/SEG23 | bidirectional | PORTG digital input or LCD Segment Driver 23. |
| 45 | RG4/SEG24 | bidirectional | PORTG digital input or LCD Segment Driver 24. |
| 46 | RG5/SEG25 | bidirectional | PORTG digital input or LCD Segment Driver 25. |
| 47 | RG6/SEG26 | bidirectional | PORTG digital input or LCD Segment Driver 26. |
| 48 | RD5/SEG29/COM3 | bidirectional | Digital input (Schmitt Trigger) shared with LCD Segment Driver 29 or Common Driver 3. |
| 49 | RD6/SEG30/COM2 | bidirectional | Digital input (Schmitt Trigger) shared with LCD Segment Driver 30 or Common Driver 2. |
| 50 | RD7/SEG31/COM1 | bidirectional | Digital input (Schmitt Trigger) shared with LCD Segment Driver 31 or Common Driver 1. |
| 51 | COM0 | output | LCD Common Driver 0. |
| 52 | VDD | power_in | Digital power supply. |
| 53 | RB6 | bidirectional | PORTB I/O with interrupt-on-change; serial programming clock (Schmitt Trigger in Serial Programming mode). |
| 54 | RB7 | bidirectional | PORTB I/O with interrupt-on-change; serial programming data (Schmitt Trigger in Serial Programming mode). |
| 55 | RB5 | bidirectional | PORTB I/O with TTL input and interrupt-on-change. |
| 56 | RB4 | bidirectional | PORTB I/O with TTL input and interrupt-on-change. |
| 57 | MCLR/VPP | input | Active-low Master Clear (Reset) input or programming voltage input, Schmitt Trigger. |
| 58 | RB3 | bidirectional | PORTB bi-directional I/O with TTL input and software-programmable weak pull-up. |
| 59 | RB2 | bidirectional | PORTB bi-directional I/O with TTL input and software-programmable weak pull-up. |
| 60 | RA0/AN0 | bidirectional | PORTA I/O with TTL input that can also be analog input 0. |
| 61 | RA1/AN1 | bidirectional | PORTA I/O with TTL input that can also be analog input 1. |
| 62 | VSS | power_in | Ground reference. |
| 63 | RA2/AN2/VREF- | bidirectional | PORTA I/O with TTL input that can also be analog input 2. |
| 64 | RA3/AN3/VREF+ | bidirectional | PORTA I/O with TTL input that can also be analog input 3 or A/D voltage reference. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | | -55 | | 125 | °C | | 139 |
| Storage temperature | | -65 | | 150 | °C | | 139 |
| Voltage on any pin with respect to VSS | | -0.3 | | | V | except VDD, MCLR, and RA4 | 139 |
| Voltage on VDD with respect to VSS | VDD | 0 | | 7.5 | V | with respect to VSS | 139 |
| Voltage on MCLR with respect to VSS | MCLR | 0 | | 13.25 | V | with respect to VSS | 139 |
| Voltage on RA4 with respect to VSS | RA4 | 0 | | 8.5 | V | with respect to VSS | 139 |
| Voltage on VLCD2, VLCD3 with respect to VSS | VLCD2, VLCD3 | 0 | | 10 | V | with respect to VSS | 139 |
| Total power dissipation | PDIS | | | 1 | W | see Note 1 | 139 |
| Input clamp current | IIK | | | 20 | mA | VI < 0 or VI > VDD | 139 |
| Output clamp current | IOK | | | 20 | mA | VO < 0 or VO > VDD | 139 |
| Supply voltage, XT, RC and LP osc configuration | VDD | 4 | | 5.5 | V | XT, RC and LP osc configuration | 141 |
| Supply voltage, HS osc configuration | VDD | 4.5 | | 5.5 | V | HS osc configuration | 141 |
| Brown-out Reset voltage trip point | VBOR | 3.65 | | 4.35 | V | BODEN bit set | 141 |
| VDD rise rate to ensure internal Power-on Reset signal | SVDD | 0.05 | | | V/ms | See Power-on Reset section for details | 141 |
| Supply current, XT and RC osc configuration | IDD | | 2.7 | 5 | mA | FOSC = 4 MHz, VDD = 5.5V (Note 4) | 141 |
| Supply current, LP osc configuration | IDD | | 35 | 70 | µA | FOSC = 32 kHz, VDD = 4.0V | 141 |
| Supply current, HS osc configuration | IDD | | 7 | 10 | mA | FOSC = 20 MHz, VDD = 5.5V | 141 |
| Power-down current (SLEEP) | IPD | | 1.5 | 21 | µA | VDD = 4.0V | 142 |
| Watchdog Timer module differential current | IWDT | | 9 | 25 | µA | VDD = 4.0V | 142 |
| LCD voltage generation with internal RC osc enabled | ILCDT1 | | 40 | 55 | µA | VDD = 4.0V (Note 7) | 142 |
| Brown-out Reset module differential current | IBOR | | 100 | 150 | µA | BODEN bit set, VDD = 5.0 | 142 |
| LCD voltage generation with Timer1 @ 32.768 kHz | ILCDT1 | | 33 | 60 | µA | VDD = 4.0V (Note 7) | 142 |
| Timer1 oscillator current | IT1OSC | | | 50 | µA | VDD = 4.0V | 143 |
| Input low voltage, I/O ports with TTL buffer | VIL | | | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 144 |
| Input high voltage, I/O ports with TTL buffer | VIH | 2 | | | V | 4.5V ≤ VDD ≤ 5.5V | 144 |
| PORTB weak pull-up current | IPURB | 50 | 250 | 400 | µA | VDD = 5V, VPIN = VSS | 144 |
| Input leakage current, I/O ports | IIL | | | 1 | µA | Vss ≤ VPIN ≤ VDD, pin at hi-Z | 144 |
| Input leakage current, MCLR and RA4/T0CKI | IIL | | | 5 | µA | Vss ≤ VPIN ≤ VDD | 144 |
| Input leakage current, OSC1 | IIL | | | 5 | µA | Vss ≤ VPIN ≤ VDD, XT, HS and LP osc configuration | 144 |
| Output low voltage, I/O ports | VOL | | | 0.6 | V | IOL = 4.0 mA, VDD = 4.5V | 144 |
| Output low voltage, OSC2/CLKOUT (RC osc mode) | VOL | | | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V | 144 |
| Capacitive loading, OSC2 pin | COSC2 | | | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 144 |
| Capacitive loading, all I/O pins and OSC2 (in RC) | CIO | | | 50 | pF | All I/O pins and OSC2 (in RC) | 144 |
| Capacitive loading, SCL, SDA in I2C mode | CB | | | 400 | pF | SCL, SDA in I2C mode | 144 |
| Open drain high voltage, RA4 pin | VDD | | | 8.5 | V | RA4 pin | 144 |
| LCDRC oscillator frequency | FLCDRC | 5 | 14 | 22 | kHz | VDD = 5V, -40°C to +85°C | 145 |
| LCD output rise time | TrLCD | | | 200 | µs | COM outputs Cload = 5,000 pF; SEG outputs Cload = 500 pF; VDD = 5.0V, T = 25°C | 145 |
| VLCDADJ current VDD rejection | IVADJ/VDD | | | 0.1 | µA/V | | 145 |
| VLCDADJ voltage limits | VVADJ | 1 | | 2.3 | V | | 145 |
| A/D resolution | NR | | | 10 | bits | VREF = VDD = 5.12V, VSS ≤ VAIN ≤ VREF | 157 |
| A/D total absolute error | EABS | -1 | | 1 | LSb | VREF = VDD = 5.12V, VSS ≤ VAIN ≤ VREF | 157 |
| A/D integral linearity error | EIL | -1 | | 1 | LSb | VREF = VDD = 5.12V, VSS ≤ VAIN ≤ VREF | 157 |
| A/D differential linearity error | EDL | -1 | | 1 | LSb | VREF = VDD = 5.12V, VSS ≤ VAIN ≤ VREF | 157 |
| A/D full scale error | EFS | -1 | | 1 | LSb | VREF = VDD = 5.12V, VSS ≤ VAIN ≤ VREF | 157 |
| A/D offset error | EOFF | -2 | | 2 | LSb | VREF = VDD = 5.12V, VSS ≤ VAIN ≤ VREF | 157 |
| A/D gain error | EGN | -1 | | 1 | LSb | VREF = VDD = 5.12V, VSS ≤ VAIN ≤ VREF | 157 |
| Recommended impedance of analog voltage source | ZAIN | | | 10 | kΩ | | 157 |
| External CLKIN frequency, HS osc mode | FOSC | | | 20 | MHz | HS osc mode | 147 |
| Oscillator frequency, HS osc mode | FOSC | 4 | | 20 | MHz | HS osc mode | 147 |
| Supply voltage RAM data retention | VDR | | 1.5 | | V | Device in SLEEP mode | 141 |
| A/D converter current, A/D on, not converting | IAD | | 1 | | µA | A/D on, not converting | 143 |
| VLCDADJ regulated current output | IVADJ | | 10 | | µA | | 145 |
| A/D converter current (VDD) | IAD | | 220 | | µA | Average current consumption when A/D is on | 157 |
## CAD (KiCad official)
- Symbol: `PIC16C926-I`
- Footprint: `Package_QFP:TQFP-64_10x10mm_P0.5mm`
- 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files: `pic16c926-i-pt-etched.step` / `pic16c926-i-pt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic16c926-i-pt.step` / `pic16c926-i-pt.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](http://ww1.microchip.com/downloads/en/DeviceDoc/39544B.pdf) (180 pp, sha256 `ffa9590d0f27fb9d`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic16c926-i-pt-datasheet.pdf)