main
Ray
Publish 0.1.0
a641d57
PIC16C773-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil
PIC16C773-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR/VPP | input | Master clear (reset) input or programming voltage input; an active low reset to the device. |
| 2 | RA0/AN0 | bidirectional | PORTA bidirectional I/O (TTL input buffer) that can also serve as analog input 0. |
| 3 | RA1/AN1 | bidirectional | PORTA bidirectional I/O (TTL input buffer) that can also serve as analog input 1. |
| 4 | RA2/AN2/VREF-/VRL | bidirectional | PORTA bidirectional I/O (TTL input buffer) that can also serve as analog input 2, negative analog reference voltage input, or internal voltage reference low. |
| 5 | RA3/AN3/VREF+/VRH | bidirectional | PORTA bidirectional I/O (TTL input buffer) that can also serve as analog input 3, positive analog reference voltage input, or internal voltage reference high. |
| 6 | RA4/T0CKI | bidirectional | PORTA bidirectional I/O (Schmitt Trigger input) that can also serve as the Timer0 clock input; the output is open drain. |
| 7 | AVDD | power_in | Positive supply for the A/D converter. |
| 8 | AVSS | power_in | Ground reference for the A/D converter. |
| 9 | OSC1/CLKIN | input | Oscillator crystal input or external clock source input (Schmitt Trigger in RC mode, CMOS input otherwise). |
| 10 | OSC2/CLKOUT | output | Oscillator crystal output connecting to a crystal or resonator; in RC mode it outputs CLKOUT at 1/4 the OSC1 frequency, denoting the instruction cycle rate. |
| 11 | RC0/T1OSO/T1CKI | bidirectional | PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the Timer1 oscillator output or Timer1 clock input. |
| 12 | RC1/T1OSI/CCP2 | bidirectional | PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the Timer1 oscillator input or Capture2 input / Compare2 output / PWM2 output. |
| 13 | RC2/CCP1 | bidirectional | PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the Capture1 input, Compare1 output, or PWM1 output. |
| 14 | RC3/SCK/SCL | bidirectional | PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the synchronous serial clock input/output for both SPI and I2C modes. |
| 15 | RC4/SDI/SDA | bidirectional | PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the SPI Data In (SPI mode) or I2C data I/O (I2C mode). |
| 16 | RC5/SDO | bidirectional | PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the SPI Data Out (SPI mode). |
| 17 | RC6/TX/CK | bidirectional | PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the USART asynchronous transmit or synchronous clock. |
| 18 | RC7/RX/DT | bidirectional | PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the USART asynchronous receive or synchronous data. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for logic and I/O pins. |
| 21 | RB0/INT | bidirectional | PORTB bidirectional I/O (TTL/Schmitt Trigger when multiplexed) that can also serve as the external interrupt pin. |
| 22 | RB1/SS | bidirectional | PORTB bidirectional I/O (TTL/Schmitt Trigger when multiplexed) that can also serve as the SSP slave select input. |
| 23 | RB2/AN8 | bidirectional | PORTB bidirectional I/O (TTL input buffer) with internal weak pull-up software-selectable, also usable as analog input 8. |
| 24 | RB3/AN9/LVDIN | bidirectional | PORTB bidirectional I/O (TTL input buffer) that can also serve as analog input 9 or the low voltage detect input reference. |
| 25 | RB4 | bidirectional | PORTB bidirectional I/O (TTL input buffer) with interrupt-on-change capability. |
| 26 | RB5 | bidirectional | PORTB bidirectional I/O (TTL input buffer) with interrupt-on-change capability. |
| 27 | RB6 | bidirectional | PORTB bidirectional I/O (TTL/Schmitt Trigger in serial programming mode) with interrupt-on-change capability; serves as the serial programming clock. |
| 28 | RB7 | bidirectional | PORTB bidirectional I/O (TTL/Schmitt Trigger in serial programming mode) with interrupt-on-change capability; serves as the serial programming data. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -55 | 125 | °C | 151 | |||
| Storage temperature | -65 | 150 | °C | 151 | |||
| Voltage on VDD with respect to VSS | VDD | -0.3 | 7.5 | V | 151 | ||
| Voltage on MCLR with respect to VSS | 0 | 8.5 | V | Note 2 | 151 | ||
| Voltage on RA4 with respect to VSS | 0 | 8.5 | V | 151 | |||
| Total power dissipation | 1 | W | Note 1 | 151 | |||
| Maximum current out of VSS pin | 300 | mA | 151 | ||||
| Input clamp current | IIK | 20 | mA | VI < 0 or VI > VDD | 151 | ||
| Output clamp current | IOK | 20 | mA | VO < 0 or VO > VDD | 151 | ||
| Maximum output current sunk by any I/O pin | 25 | mA | 151 | ||||
| Maximum output current sourced by any I/O pin | 25 | mA | 151 | ||||
| Maximum current sunk by PORTA, PORTB, PORTE (combined) | 200 | mA | Note 3 | 151 | |||
| Maximum current sourced by PORTA, PORTB, PORTE (combined) | 200 | mA | Note 3 | 151 | |||
| Maximum current sunk by PORTC and PORTD (combined) | 200 | mA | Note 3 | 151 | |||
| Maximum current sourced by PORTC and PORTD (combined) | 200 | mA | Note 3 | 151 | |||
| Supply Voltage | VDD | 4 | 5.5 | V | XT, RC and LP osc configuration | 152 | |
| Supply Voltage (HS) | VDD | 4.5 | 5.5 | V | HS osc configuration | 152 | |
| Operating temperature, industrial | TA | -40 | 85 | °C | industrial | 152 | |
| VDD rise rate to ensure internal Power-on Reset | SVDD | 0.05 | V/ms | See section on Power-on Reset for details. PWRT enabled | 152 | ||
| Supply Current, XT, RC | IDD | 2.7 | 5 | mA | XT, RC osc configuration FOSC = 4 MHz, VDD = 5.5V (Note 4) | 152 | |
| Supply Current, HS | IDD | 13.5 | 30 | mA | HS osc configuration FOSC = 20 MHz, VDD = 5.5V | 152 | |
| Power-down Current, commercial range | IPD | 1.5 | 16 | µA | VDD = 4.0V, 0°C to +70°C | 152 | |
| Power-down Current, industrial range | IPD | 1.5 | 19 | µA | VDD = 4.0V, -40°C to +85°C | 152 | |
| Watchdog Timer current | IWDT | 6 | 20 | µA | VDD = 4.0V | 152 | |
| Input Low Voltage, TTL buffer, I/O ports | VIL | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 154 | ||
| Input High Voltage, TTL buffer, I/O ports | VIH | 2 | V | 4.5V ≤ VDD ≤ 5.5V | 154 | ||
| PORTB weak pull-up current | IPURB | 50 | 250 | 400 | µA | VDD = 5V, VPIN = VSS | 154 |
| Input Leakage Current, I/O ports (digital) | IIL | 1 | µA | Vss ≤ VPIN ≤ VDD, Pin at hi-impedance | 154 | ||
| Input Leakage Current, analog I/O ports | IIL | 100 | nA | Vss ≤ VPIN ≤ VDD, Pin at hi-impedance | 154 | ||
| Input Leakage Current, MCLR, RA4/T0CKI | IIL | 5 | µA | Vss ≤ VPIN ≤ VDD | 154 | ||
| Input Leakage Current, OSC1 | IIL | 5 | µA | Vss ≤ VPIN ≤ VDD, XT, HS and LP osc configuration | 154 | ||
| Output Low Voltage, I/O ports | VOL | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40°C to +85°C | 154 | ||
| Output Low Voltage, OSC2/CLKOUT | VOL | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V, -40°C to +85°C | 154 | ||
| Open-Drain High Voltage | VOD | 8.5 | V | RA4 pin | 155 | ||
| Capacitive loading, OSC2 pin | COSC2 | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 155 | ||
| Capacitive loading, all I/O pins and OSC2 (RC mode) | CIO | 50 | pF | 155 | |||
| Capacitive loading, SCL, SDA in I2C mode | CB | 400 | pF | 155 | |||
| VRL output voltage | VRL | 2 | 2.048 | 2.1 | V | VDD ≥ 2.5V | 156 |
| VRH output voltage | VRH | 4 | 4.096 | 4.2 | V | VDD ≥ 4.5V | 156 |
| Output Voltage Drift | TCVOUT | 15 | 50 | ppm/°C | Note 1 | 156 | |
| External Load Source | IVREFSO | 5 | mA | 156 | |||
| BOR Voltage, BORV1:0 = 11 | VBOR | 2.5 | 2.58 | 2.66 | V | BORV1:0 = 11 | 158 |
| BOR Voltage, BORV1:0 = 10 | VBOR | 2.7 | 2.78 | 2.86 | V | BORV1:0 = 10 | 158 |
| BOR Voltage, BORV1:0 = 01 | VBOR | 4.2 | 4.33 | 4.46 | V | BORV1:0 = 01 | 158 |
| BOR Voltage, BORV1:0 = 00 | VBOR | 4.5 | 4.64 | 4.78 | V | BORV1:0 = 00 | 158 |
| BOR Supply Current | IBOR | 10 | 20 | µA | 158 | ||
| Brown-out Hysteresis | VBHYS | 100 | mV | 158 | |||
| A/D Integral error | EIL | -2 | 2 | LSb | VREF+ = AVDD = 4.096V, VREF- = AVSS = 0V, VREF- ≤ VAIN ≤ VREF+ | 165 | |
| A/D Differential error | EDL | -1 | 2 | LSb | No missing codes to 12-bits; VREF+ = AVDD = 4.096V, VREF- = AVSS = 0V, VREF- ≤ VAIN ≤ VREF+ | 165 | |
| A/D Gain Error | EGN | -2 | 2 | LSb | VREF+ = AVDD = 4.096V, VREF- = AVSS = 0V, VREF- ≤ VAIN ≤ VREF+ | 165 | |
| A/D Reference voltage (VREF+ - VREF-) | VREF | 4.096 | V | Absolute minimum electrical spec to ensure 12-bit accuracy | 165 | ||
| Recommended impedance of analog voltage source | ZAIN | 2.5 | kΩ | 165 | |||
| VREF input current | IREF | 10 | µA | During VAIN acquisition. Based on differential of VHOLD to VAIN | 165 | ||
| A/D clock period | TAD | 1.6 | µs | Tosc based, VREF ≥ 2.5V | 166 | ||
| A/D clock period | TAD | 3 | µs | Tosc based, VREF full range | 166 | ||
| RAM Data Retention Voltage | VDR | 1.5 | V | 152 | |||
| A/D Converter current | IAD | 300 | µA | VDD = 5.5V, A/D on, not converting | 152 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
PIC16C773-I - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil, generated on the KiCad land (body 5.29 x 10.2 mm, terminals on the pads, 1.86 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
pic16c773-i-ss-etched.step/pic16c773-i-ss-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16c773-i-ss.step/pic16c773-i-ss.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (202 pp, sha256
6ff531e81748e3d0, retrieved 2026-11-20) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# PIC16C773-I
**Microchip Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil
PIC16C773-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR/VPP | input | Master clear (reset) input or programming voltage input; an active low reset to the device. |
| 2 | RA0/AN0 | bidirectional | PORTA bidirectional I/O (TTL input buffer) that can also serve as analog input 0. |
| 3 | RA1/AN1 | bidirectional | PORTA bidirectional I/O (TTL input buffer) that can also serve as analog input 1. |
| 4 | RA2/AN2/VREF-/VRL | bidirectional | PORTA bidirectional I/O (TTL input buffer) that can also serve as analog input 2, negative analog reference voltage input, or internal voltage reference low. |
| 5 | RA3/AN3/VREF+/VRH | bidirectional | PORTA bidirectional I/O (TTL input buffer) that can also serve as analog input 3, positive analog reference voltage input, or internal voltage reference high. |
| 6 | RA4/T0CKI | bidirectional | PORTA bidirectional I/O (Schmitt Trigger input) that can also serve as the Timer0 clock input; the output is open drain. |
| 7 | AVDD | power_in | Positive supply for the A/D converter. |
| 8 | AVSS | power_in | Ground reference for the A/D converter. |
| 9 | OSC1/CLKIN | input | Oscillator crystal input or external clock source input (Schmitt Trigger in RC mode, CMOS input otherwise). |
| 10 | OSC2/CLKOUT | output | Oscillator crystal output connecting to a crystal or resonator; in RC mode it outputs CLKOUT at 1/4 the OSC1 frequency, denoting the instruction cycle rate. |
| 11 | RC0/T1OSO/T1CKI | bidirectional | PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the Timer1 oscillator output or Timer1 clock input. |
| 12 | RC1/T1OSI/CCP2 | bidirectional | PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the Timer1 oscillator input or Capture2 input / Compare2 output / PWM2 output. |
| 13 | RC2/CCP1 | bidirectional | PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the Capture1 input, Compare1 output, or PWM1 output. |
| 14 | RC3/SCK/SCL | bidirectional | PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the synchronous serial clock input/output for both SPI and I2C modes. |
| 15 | RC4/SDI/SDA | bidirectional | PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the SPI Data In (SPI mode) or I2C data I/O (I2C mode). |
| 16 | RC5/SDO | bidirectional | PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the SPI Data Out (SPI mode). |
| 17 | RC6/TX/CK | bidirectional | PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the USART asynchronous transmit or synchronous clock. |
| 18 | RC7/RX/DT | bidirectional | PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the USART asynchronous receive or synchronous data. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for logic and I/O pins. |
| 21 | RB0/INT | bidirectional | PORTB bidirectional I/O (TTL/Schmitt Trigger when multiplexed) that can also serve as the external interrupt pin. |
| 22 | RB1/SS | bidirectional | PORTB bidirectional I/O (TTL/Schmitt Trigger when multiplexed) that can also serve as the SSP slave select input. |
| 23 | RB2/AN8 | bidirectional | PORTB bidirectional I/O (TTL input buffer) with internal weak pull-up software-selectable, also usable as analog input 8. |
| 24 | RB3/AN9/LVDIN | bidirectional | PORTB bidirectional I/O (TTL input buffer) that can also serve as analog input 9 or the low voltage detect input reference. |
| 25 | RB4 | bidirectional | PORTB bidirectional I/O (TTL input buffer) with interrupt-on-change capability. |
| 26 | RB5 | bidirectional | PORTB bidirectional I/O (TTL input buffer) with interrupt-on-change capability. |
| 27 | RB6 | bidirectional | PORTB bidirectional I/O (TTL/Schmitt Trigger in serial programming mode) with interrupt-on-change capability; serves as the serial programming clock. |
| 28 | RB7 | bidirectional | PORTB bidirectional I/O (TTL/Schmitt Trigger in serial programming mode) with interrupt-on-change capability; serves as the serial programming data. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | | -55 | | 125 | °C | | 151 |
| Storage temperature | | -65 | | 150 | °C | | 151 |
| Voltage on VDD with respect to VSS | VDD | -0.3 | | 7.5 | V | | 151 |
| Voltage on MCLR with respect to VSS | | 0 | | 8.5 | V | Note 2 | 151 |
| Voltage on RA4 with respect to VSS | | 0 | | 8.5 | V | | 151 |
| Total power dissipation | | | | 1 | W | Note 1 | 151 |
| Maximum current out of VSS pin | | | | 300 | mA | | 151 |
| Input clamp current | IIK | | | 20 | mA | VI < 0 or VI > VDD | 151 |
| Output clamp current | IOK | | | 20 | mA | VO < 0 or VO > VDD | 151 |
| Maximum output current sunk by any I/O pin | | | | 25 | mA | | 151 |
| Maximum output current sourced by any I/O pin | | | | 25 | mA | | 151 |
| Maximum current sunk by PORTA, PORTB, PORTE (combined) | | | | 200 | mA | Note 3 | 151 |
| Maximum current sourced by PORTA, PORTB, PORTE (combined) | | | | 200 | mA | Note 3 | 151 |
| Maximum current sunk by PORTC and PORTD (combined) | | | | 200 | mA | Note 3 | 151 |
| Maximum current sourced by PORTC and PORTD (combined) | | | | 200 | mA | Note 3 | 151 |
| Supply Voltage | VDD | 4 | | 5.5 | V | XT, RC and LP osc configuration | 152 |
| Supply Voltage (HS) | VDD | 4.5 | | 5.5 | V | HS osc configuration | 152 |
| Operating temperature, industrial | TA | -40 | | 85 | °C | industrial | 152 |
| VDD rise rate to ensure internal Power-on Reset | SVDD | 0.05 | | | V/ms | See section on Power-on Reset for details. PWRT enabled | 152 |
| Supply Current, XT, RC | IDD | | 2.7 | 5 | mA | XT, RC osc configuration FOSC = 4 MHz, VDD = 5.5V (Note 4) | 152 |
| Supply Current, HS | IDD | | 13.5 | 30 | mA | HS osc configuration FOSC = 20 MHz, VDD = 5.5V | 152 |
| Power-down Current, commercial range | IPD | | 1.5 | 16 | µA | VDD = 4.0V, 0°C to +70°C | 152 |
| Power-down Current, industrial range | IPD | | 1.5 | 19 | µA | VDD = 4.0V, -40°C to +85°C | 152 |
| Watchdog Timer current | IWDT | | 6 | 20 | µA | VDD = 4.0V | 152 |
| Input Low Voltage, TTL buffer, I/O ports | VIL | | | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 154 |
| Input High Voltage, TTL buffer, I/O ports | VIH | 2 | | | V | 4.5V ≤ VDD ≤ 5.5V | 154 |
| PORTB weak pull-up current | IPURB | 50 | 250 | 400 | µA | VDD = 5V, VPIN = VSS | 154 |
| Input Leakage Current, I/O ports (digital) | IIL | | | 1 | µA | Vss ≤ VPIN ≤ VDD, Pin at hi-impedance | 154 |
| Input Leakage Current, analog I/O ports | IIL | | | 100 | nA | Vss ≤ VPIN ≤ VDD, Pin at hi-impedance | 154 |
| Input Leakage Current, MCLR, RA4/T0CKI | IIL | | | 5 | µA | Vss ≤ VPIN ≤ VDD | 154 |
| Input Leakage Current, OSC1 | IIL | | | 5 | µA | Vss ≤ VPIN ≤ VDD, XT, HS and LP osc configuration | 154 |
| Output Low Voltage, I/O ports | VOL | | | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40°C to +85°C | 154 |
| Output Low Voltage, OSC2/CLKOUT | VOL | | | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V, -40°C to +85°C | 154 |
| Open-Drain High Voltage | VOD | | | 8.5 | V | RA4 pin | 155 |
| Capacitive loading, OSC2 pin | COSC2 | | | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 155 |
| Capacitive loading, all I/O pins and OSC2 (RC mode) | CIO | | | 50 | pF | | 155 |
| Capacitive loading, SCL, SDA in I2C mode | CB | | | 400 | pF | | 155 |
| VRL output voltage | VRL | 2 | 2.048 | 2.1 | V | VDD ≥ 2.5V | 156 |
| VRH output voltage | VRH | 4 | 4.096 | 4.2 | V | VDD ≥ 4.5V | 156 |
| Output Voltage Drift | TCVOUT | | 15 | 50 | ppm/°C | Note 1 | 156 |
| External Load Source | IVREFSO | | | 5 | mA | | 156 |
| BOR Voltage, BORV1:0 = 11 | VBOR | 2.5 | 2.58 | 2.66 | V | BORV1:0 = 11 | 158 |
| BOR Voltage, BORV1:0 = 10 | VBOR | 2.7 | 2.78 | 2.86 | V | BORV1:0 = 10 | 158 |
| BOR Voltage, BORV1:0 = 01 | VBOR | 4.2 | 4.33 | 4.46 | V | BORV1:0 = 01 | 158 |
| BOR Voltage, BORV1:0 = 00 | VBOR | 4.5 | 4.64 | 4.78 | V | BORV1:0 = 00 | 158 |
| BOR Supply Current | IBOR | | 10 | 20 | µA | | 158 |
| Brown-out Hysteresis | VBHYS | | | 100 | mV | | 158 |
| A/D Integral error | EIL | -2 | | 2 | LSb | VREF+ = AVDD = 4.096V, VREF- = AVSS = 0V, VREF- ≤ VAIN ≤ VREF+ | 165 |
| A/D Differential error | EDL | -1 | | 2 | LSb | No missing codes to 12-bits; VREF+ = AVDD = 4.096V, VREF- = AVSS = 0V, VREF- ≤ VAIN ≤ VREF+ | 165 |
| A/D Gain Error | EGN | -2 | | 2 | LSb | VREF+ = AVDD = 4.096V, VREF- = AVSS = 0V, VREF- ≤ VAIN ≤ VREF+ | 165 |
| A/D Reference voltage (VREF+ - VREF-) | VREF | 4.096 | | | V | Absolute minimum electrical spec to ensure 12-bit accuracy | 165 |
| Recommended impedance of analog voltage source | ZAIN | | | 2.5 | kΩ | | 165 |
| VREF input current | IREF | | | 10 | µA | During VAIN acquisition. Based on differential of VHOLD to VAIN | 165 |
| A/D clock period | TAD | 1.6 | | | µs | Tosc based, VREF ≥ 2.5V | 166 |
| A/D clock period | TAD | 3 | | | µs | Tosc based, VREF full range | 166 |
| RAM Data Retention Voltage | VDR | | 1.5 | | V | | 152 |
| A/D Converter current | IAD | | 300 | | µA | VDD = 5.5V, A/D on, not converting | 152 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `PIC16C773-I`
- Footprint: `Package_SO:SSOP-28_5.3x10.2mm_P0.65mm`
- 3D model: SSOP-28-208mil, generated on the KiCad land (body 5.29 x 10.2 mm, terminals on the pads, 1.86 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `pic16c773-i-ss-etched.step` / `pic16c773-i-ss-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic16c773-i-ss.step` / `pic16c773-i-ss.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/30275B.pdf) (202 pp, sha256 `6ff531e81748e3d0`, retrieved 2026-11-20)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/pic16c773-i-ss-datasheet.pdf)