main
Ray
pic16c745-i-so: renamed from pic16c745-i, the part it was built from (PIC16C745-I/SO); family listed
8992e60
PIC16C745-I/SO
Microchip Tech · MICROCHIP · SOIC-28-300mil
PIC16C745-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR/VPP | input | Active-low master clear reset input, which also serves as the 12V programming voltage VPP input during programming. |
| 2 | RA0/AN0 | bidirectional | Bidirectional CMOS I/O with Schmitt Trigger input, also A/D channel 0 analog input. |
| 3 | RA1/AN1 | bidirectional | Bidirectional CMOS I/O with Schmitt Trigger input, also A/D channel 1 analog input. |
| 4 | RA2/AN2 | bidirectional | Bidirectional CMOS I/O with Schmitt Trigger input, also A/D channel 2 analog input. |
| 5 | RA3/AN3/VREF | bidirectional | Bidirectional CMOS I/O with Schmitt Trigger input, also A/D channel 3 input and A/D positive reference voltage VREF. |
| 6 | RA4/T0CKI | bidirectional | Open-drain bidirectional I/O with Schmitt Trigger input, also Timer0 clock input T0CKI; this is the high voltage open-drain pin. |
| 7 | RA5/AN4 | bidirectional | Bidirectional I/O with Schmitt Trigger input, also A/D channel 4 analog input. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | OSC1/CLKIN | input | Crystal/resonator oscillator input, or external clock input CLKIN with Schmitt Trigger. |
| 10 | OSC2/CLKOUT | output | Crystal/resonator oscillator output, or CMOS output of the internal clock FINT/4 (CLKOUT). |
| 11 | RC0/T1OSO/T1CKI | bidirectional | Bidirectional CMOS I/O with Schmitt Trigger input, also Timer1 oscillator output T1OSO or Timer1 clock input T1CKI. |
| 12 | RC1/T1OSI/CCP2 | bidirectional | Bidirectional CMOS I/O with Schmitt Trigger input, also Timer1 oscillator input T1OSI or CCP2 capture/compare/PWM output. |
| 13 | RC2/CCP1 | bidirectional | Bidirectional CMOS I/O with Schmitt Trigger input, also CCP1 capture input, compare output or PWM output. |
| 14 | VUSB | power_in | 3.3V supply for the USB pull-up resistor. |
| 15 | D- | bidirectional | USB differential bus minus line. |
| 16 | D+ | bidirectional | USB differential bus plus line. |
| 17 | RC6/TX/CK | bidirectional | Bidirectional CMOS I/O with Schmitt Trigger input, also USART asynchronous transmit TX or synchronous clock CK. |
| 18 | RC7/RX/DT | bidirectional | Bidirectional CMOS I/O with Schmitt Trigger input, also USART asynchronous receive RX or synchronous data DT. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for logic and I/O pins. |
| 21 | RB0/INT | bidirectional | Bidirectional I/O with TTL input, also external interrupt INT with Schmitt Trigger input. |
| 22 | RB1 | bidirectional | Bidirectional I/O with TTL input and weak pull-up, which is byte-wide programmable for PORTB. |
| 23 | RB2 | bidirectional | Bidirectional I/O with TTL input and weak pull-up, which is byte-wide programmable for PORTB. |
| 24 | RB3 | bidirectional | Bidirectional I/O with TTL input and weak pull-up, which is byte-wide programmable for PORTB. |
| 25 | RB4 | bidirectional | Bidirectional I/O with TTL input and interrupt-on-change capability. |
| 26 | RB5 | bidirectional | Bidirectional I/O with TTL input and interrupt-on-change capability. |
| 27 | RB6/ICSPC | bidirectional | Bidirectional I/O with TTL input and interrupt-on-change capability, also In-Circuit Serial Programming clock input ICSPC. |
| 28 | RB7/ICSPD | bidirectional | Bidirectional I/O with TTL input and interrupt-on-change capability, also In-Circuit Serial Programming data I/O ICSPD. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-28-300mil |
| Category | Embedded Processors & Controllers |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -55 | 125 | °C | 123 | |||
| Storage temperature | -65 | 150 | °C | 123 | |||
| Voltage on VDD with respect to VSS | -0.3 | 7.5 | V | 123 | |||
| Voltage on MCLR with respect to VSS | -0.3 | 13.25 | V | 123 | |||
| Voltage on RA4 with respect to VSS | -0.3 | 10.5 | V | 123 | |||
| Total power dissipation | Pdis | 1 | W | Note 1 | 123 | ||
| Input clamp current | IIK | -20 | 20 | mA | VI < 0 or VI > VDD | 123 | |
| Output clamp current | IOK | -20 | 20 | mA | VO < 0 or VO > VDD | 123 | |
| Supply voltage | VDD | 4.35 | 5.25 | V | See Figure 16-1 | 125 | |
| Operating temperature range (industrial) | TA | -40 | 85 | °C | Industrial | 125 | |
| VDD rise rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/mS | PWRT enabled (PWRTE bit clear) | 125 | ||
| Brown-out Reset voltage trip point | VBOR | 3.65 | 4.35 | V | Brown-out Reset is always active | 125 | |
| Input low voltage, I/O ports with TTL buffer | VIL | 0.8 | V | 126 | |||
| Input low voltage, I/O ports with Schmitt Trigger buffer | VIL | 0.2 | VDD | For entire VDD range | 126 | ||
| Input low voltage, MCLR and OSC1 in EC/E4 mode | VIL | 0.2 | VDD | 126 | |||
| Input low voltage, OSC1 in HS/H4 mode | VIL | 0.3 | VDD | Note 1 | 126 | ||
| Input high voltage, I/O ports with TTL buffer | VIH | 2 | V | 126 | |||
| Input high voltage, I/O ports with Schmitt Trigger buffer | VIH | 0.8 | VDD | For entire VDD range | 126 | ||
| Input high voltage, MCLR | VIH | 0.8 | VDD | 126 | |||
| Input high voltage, OSC1 in HS/H4 mode | VIH | 0.7 | VDD | Note 1 | 126 | ||
| Input high voltage, OSC1 in EC/E4 mode | VIH | 0.9 | VDD | 126 | |||
| Input leakage current, I/O ports | IIL | -1 | 1 | µA | VSS ≤ VPIN ≤ VDD, Pin at hi-impedance | 126 | |
| Input leakage current, MCLR and RA4/T0CKI | IIL | -5 | 5 | µA | VSS ≤ VPIN ≤ VDD | 126 | |
| Input leakage current, OSC1 | IIL | -5 | 5 | µA | VSS ≤ VPIN ≤ VDD, HS osc mode | 126 | |
| PORTB weak pull-up current | IPURB | 50 | 250 | 400 | µA | VDD = 5V, VPIN = VSS | 126 |
| Output low voltage, I/O ports | VOL | 0.6 | V | IOL = 8.5 mA, VDD = 4.35V, -40°C to +85°C | 127 | ||
| Capacitive loading, OSC2 pin | COSC2 | 15 | pF | In HS mode when external clock is used to drive OSC1 | 127 | ||
| Capacitive loading, all I/O pins and OSC2 (EC mode) | CIO | 50 | pF | All I/O pins and OSC2 (in EC mode) | 127 | ||
| Vusb regulation capacitor | CVUSB | 0.01 | µF | 127 | |||
| Vusb regulation capacitor tolerance | CVUSB | 20 | % | +20% | 127 | ||
| External CLKIN frequency, EC osc mode | FOSC | 24 | 24 | MHz | EC osc mode | 131 | |
| External CLKIN frequency, E4 osc mode | FOSC | 6 | 6 | MHz | E4 osc mode | 131 | |
| Oscillator frequency, HS osc mode | FOSC | 24 | 24 | MHz | HS osc mode | 131 | |
| Oscillator frequency, H4 osc mode | FOSC | 6 | 6 | MHz | H4 osc mode | 131 | |
| Instruction cycle time | 2TCY | 167 | ns | TCY = 4/FINT | 131 | ||
| OSC1 to CLKOUT falling delay | TOSH2CKL | 75 | 200 | ns | Note 1 | 132 | |
| OSC1 to Port out valid delay (Q1 cycle) | TOSH2IOV | 50 | 150 | ns | 132 | ||
| Port output rise time | TIOR | 10 | 40 | ns | 132 | ||
| Transition rise time | TLR | 75 | 300 | ns | 140 | ||
| Transition fall time | TLF | 75 | 300 | ns | 140 | ||
| Crossover voltage | VCRS | 1.3 | 2 | 2 | V | 140 | |
| Rise and fall time matching | TLRFM | 80 | 125 | % | 140 | ||
| Voltage output high (USB) | VOH | 2.8 | 3.6 | V | 140 | ||
| USB voltage output | VUSB | 2.7 | 3.6 | V | 140 | ||
| Voltage output low (USB) | VOL | 0 | 0.3 | V | 140 | ||
| Voltage input high (USB) | VIH | 2 | V | 140 | |||
| A/D resolution | NR | 8 | bits | 138 | |||
| A/D reference voltage | VREF | 2.5 | V | 138 | |||
| Recommended impedance of analog voltage source | ZAIN | 10 | kΩ | 138 | |||
| USB source resistor nominal | RSRC | 39 | Ω | 140 | |||
| USB source resistor tolerance | RSRC | -2 | 2 | % | 140 |
CAD (KiCad official)
- Symbol:
PIC16C745-I - Footprint:
Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm - 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files:
pic16c745-i-etched.step/pic16c745-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16c745-i.step/pic16c745-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (158 pp, sha256
ab7c09a6b3eb1804, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC16C745-I/SO. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC16C745-I/SP
# PIC16C745-I/SO
**Microchip Tech** · MICROCHIP · SOIC-28-300mil
PIC16C745-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR/VPP | input | Active-low master clear reset input, which also serves as the 12V programming voltage VPP input during programming. |
| 2 | RA0/AN0 | bidirectional | Bidirectional CMOS I/O with Schmitt Trigger input, also A/D channel 0 analog input. |
| 3 | RA1/AN1 | bidirectional | Bidirectional CMOS I/O with Schmitt Trigger input, also A/D channel 1 analog input. |
| 4 | RA2/AN2 | bidirectional | Bidirectional CMOS I/O with Schmitt Trigger input, also A/D channel 2 analog input. |
| 5 | RA3/AN3/VREF | bidirectional | Bidirectional CMOS I/O with Schmitt Trigger input, also A/D channel 3 input and A/D positive reference voltage VREF. |
| 6 | RA4/T0CKI | bidirectional | Open-drain bidirectional I/O with Schmitt Trigger input, also Timer0 clock input T0CKI; this is the high voltage open-drain pin. |
| 7 | RA5/AN4 | bidirectional | Bidirectional I/O with Schmitt Trigger input, also A/D channel 4 analog input. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | OSC1/CLKIN | input | Crystal/resonator oscillator input, or external clock input CLKIN with Schmitt Trigger. |
| 10 | OSC2/CLKOUT | output | Crystal/resonator oscillator output, or CMOS output of the internal clock FINT/4 (CLKOUT). |
| 11 | RC0/T1OSO/T1CKI | bidirectional | Bidirectional CMOS I/O with Schmitt Trigger input, also Timer1 oscillator output T1OSO or Timer1 clock input T1CKI. |
| 12 | RC1/T1OSI/CCP2 | bidirectional | Bidirectional CMOS I/O with Schmitt Trigger input, also Timer1 oscillator input T1OSI or CCP2 capture/compare/PWM output. |
| 13 | RC2/CCP1 | bidirectional | Bidirectional CMOS I/O with Schmitt Trigger input, also CCP1 capture input, compare output or PWM output. |
| 14 | VUSB | power_in | 3.3V supply for the USB pull-up resistor. |
| 15 | D- | bidirectional | USB differential bus minus line. |
| 16 | D+ | bidirectional | USB differential bus plus line. |
| 17 | RC6/TX/CK | bidirectional | Bidirectional CMOS I/O with Schmitt Trigger input, also USART asynchronous transmit TX or synchronous clock CK. |
| 18 | RC7/RX/DT | bidirectional | Bidirectional CMOS I/O with Schmitt Trigger input, also USART asynchronous receive RX or synchronous data DT. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for logic and I/O pins. |
| 21 | RB0/INT | bidirectional | Bidirectional I/O with TTL input, also external interrupt INT with Schmitt Trigger input. |
| 22 | RB1 | bidirectional | Bidirectional I/O with TTL input and weak pull-up, which is byte-wide programmable for PORTB. |
| 23 | RB2 | bidirectional | Bidirectional I/O with TTL input and weak pull-up, which is byte-wide programmable for PORTB. |
| 24 | RB3 | bidirectional | Bidirectional I/O with TTL input and weak pull-up, which is byte-wide programmable for PORTB. |
| 25 | RB4 | bidirectional | Bidirectional I/O with TTL input and interrupt-on-change capability. |
| 26 | RB5 | bidirectional | Bidirectional I/O with TTL input and interrupt-on-change capability. |
| 27 | RB6/ICSPC | bidirectional | Bidirectional I/O with TTL input and interrupt-on-change capability, also In-Circuit Serial Programming clock input ICSPC. |
| 28 | RB7/ICSPD | bidirectional | Bidirectional I/O with TTL input and interrupt-on-change capability, also In-Circuit Serial Programming data I/O ICSPD. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-28-300mil |
| Category | Embedded Processors & Controllers |
| Pins | 28 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | | -55 | | 125 | °C | | 123 |
| Storage temperature | | -65 | | 150 | °C | | 123 |
| Voltage on VDD with respect to VSS | | -0.3 | | 7.5 | V | | 123 |
| Voltage on MCLR with respect to VSS | | -0.3 | | 13.25 | V | | 123 |
| Voltage on RA4 with respect to VSS | | -0.3 | | 10.5 | V | | 123 |
| Total power dissipation | Pdis | | | 1 | W | Note 1 | 123 |
| Input clamp current | IIK | -20 | | 20 | mA | VI < 0 or VI > VDD | 123 |
| Output clamp current | IOK | -20 | | 20 | mA | VO < 0 or VO > VDD | 123 |
| Supply voltage | VDD | 4.35 | | 5.25 | V | See Figure 16-1 | 125 |
| Operating temperature range (industrial) | TA | -40 | | 85 | °C | Industrial | 125 |
| VDD rise rate to ensure internal Power-on Reset signal | SVDD | 0.05 | | | V/mS | PWRT enabled (PWRTE bit clear) | 125 |
| Brown-out Reset voltage trip point | VBOR | 3.65 | | 4.35 | V | Brown-out Reset is always active | 125 |
| Input low voltage, I/O ports with TTL buffer | VIL | | | 0.8 | V | | 126 |
| Input low voltage, I/O ports with Schmitt Trigger buffer | VIL | | | 0.2 | VDD | For entire VDD range | 126 |
| Input low voltage, MCLR and OSC1 in EC/E4 mode | VIL | | | 0.2 | VDD | | 126 |
| Input low voltage, OSC1 in HS/H4 mode | VIL | | | 0.3 | VDD | Note 1 | 126 |
| Input high voltage, I/O ports with TTL buffer | VIH | 2 | | | V | | 126 |
| Input high voltage, I/O ports with Schmitt Trigger buffer | VIH | 0.8 | | | VDD | For entire VDD range | 126 |
| Input high voltage, MCLR | VIH | 0.8 | | | VDD | | 126 |
| Input high voltage, OSC1 in HS/H4 mode | VIH | 0.7 | | | VDD | Note 1 | 126 |
| Input high voltage, OSC1 in EC/E4 mode | VIH | 0.9 | | | VDD | | 126 |
| Input leakage current, I/O ports | IIL | -1 | | 1 | µA | VSS ≤ VPIN ≤ VDD, Pin at hi-impedance | 126 |
| Input leakage current, MCLR and RA4/T0CKI | IIL | -5 | | 5 | µA | VSS ≤ VPIN ≤ VDD | 126 |
| Input leakage current, OSC1 | IIL | -5 | | 5 | µA | VSS ≤ VPIN ≤ VDD, HS osc mode | 126 |
| PORTB weak pull-up current | IPURB | 50 | 250 | 400 | µA | VDD = 5V, VPIN = VSS | 126 |
| Output low voltage, I/O ports | VOL | | | 0.6 | V | IOL = 8.5 mA, VDD = 4.35V, -40°C to +85°C | 127 |
| Capacitive loading, OSC2 pin | COSC2 | | | 15 | pF | In HS mode when external clock is used to drive OSC1 | 127 |
| Capacitive loading, all I/O pins and OSC2 (EC mode) | CIO | | | 50 | pF | All I/O pins and OSC2 (in EC mode) | 127 |
| Vusb regulation capacitor | CVUSB | | 0.01 | | µF | | 127 |
| Vusb regulation capacitor tolerance | CVUSB | | | 20 | % | +20% | 127 |
| External CLKIN frequency, EC osc mode | FOSC | 24 | | 24 | MHz | EC osc mode | 131 |
| External CLKIN frequency, E4 osc mode | FOSC | 6 | | 6 | MHz | E4 osc mode | 131 |
| Oscillator frequency, HS osc mode | FOSC | 24 | | 24 | MHz | HS osc mode | 131 |
| Oscillator frequency, H4 osc mode | FOSC | 6 | | 6 | MHz | H4 osc mode | 131 |
| Instruction cycle time | 2TCY | 167 | | | ns | TCY = 4/FINT | 131 |
| OSC1 to CLKOUT falling delay | TOSH2CKL | | 75 | 200 | ns | Note 1 | 132 |
| OSC1 to Port out valid delay (Q1 cycle) | TOSH2IOV | | 50 | 150 | ns | | 132 |
| Port output rise time | TIOR | | 10 | 40 | ns | | 132 |
| Transition rise time | TLR | 75 | | 300 | ns | | 140 |
| Transition fall time | TLF | 75 | | 300 | ns | | 140 |
| Crossover voltage | VCRS | 1.3 | 2 | 2 | V | | 140 |
| Rise and fall time matching | TLRFM | 80 | | 125 | % | | 140 |
| Voltage output high (USB) | VOH | 2.8 | | 3.6 | V | | 140 |
| USB voltage output | VUSB | 2.7 | | 3.6 | V | | 140 |
| Voltage output low (USB) | VOL | 0 | | 0.3 | V | | 140 |
| Voltage input high (USB) | VIH | 2 | | | V | | 140 |
| A/D resolution | NR | | | 8 | bits | | 138 |
| A/D reference voltage | VREF | 2.5 | | | V | | 138 |
| Recommended impedance of analog voltage source | ZAIN | | | 10 | kΩ | | 138 |
| USB source resistor nominal | RSRC | | 39 | | Ω | | 140 |
| USB source resistor tolerance | RSRC | -2 | | 2 | % | | 140 |
## CAD (KiCad official)
- Symbol: `PIC16C745-I`
- Footprint: `Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm`
- 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files: `pic16c745-i-etched.step` / `pic16c745-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic16c745-i.step` / `pic16c745-i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/pic16c745-i-datasheet.pdf) (158 pp, sha256 `ab7c09a6b3eb1804`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic16c745-i-datasheet.pdf)
## Other parts in this family
This page is **PIC16C745-I/SO**. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC16C745-I/SP