main
Ray
Publish 0.1.0
49cb1f8
PIC16C716-20
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · PDIP-18
PIC16C716-20 from Microchip Tech, in a PDIP-18. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RA2/AN2 | bidirectional | Bidirectional TTL-compatible digital I/O pin that can also be used as analog input AN2. |
| 2 | RA3/AN3/VREF | bidirectional | Bidirectional TTL-compatible digital I/O pin that can also be used as analog input AN3 and as the A/D reference voltage input VREF. |
| 3 | RA4/T0CKI | bidirectional | Digital I/O with Schmitt-trigger input and open-drain output when configured as an output, which also serves as the Timer0 external clock input T0CKI. |
| 4 | MCLR/VPP | input | Active-low master clear (Reset) input to the device; VPP is the programming voltage input. |
| 5 | VSS | power_in | Ground reference for logic and I/O pins. |
| 6 | RB0/INT | bidirectional | Bidirectional TTL digital I/O pin with Schmitt-trigger input that also serves as the external interrupt input INT. |
| 7 | RB1/T1OSO/T1CKI | bidirectional | Bidirectional TTL digital I/O pin that also serves as the Timer1 oscillator output T1OSO (connects to crystal in oscillator mode) and the Timer1 external clock input T1CKI. |
| 8 | RB2/T1OSI | bidirectional | Bidirectional TTL digital I/O pin that also serves as the Timer1 oscillator input T1OSI (connects to crystal in oscillator mode). |
| 9 | RB3/CCP1 | bidirectional | Bidirectional TTL digital I/O pin that is multiplexed as Capture1 input, Compare1 output, or PWM1 output. |
| 10 | RB4 | bidirectional | Bidirectional TTL digital I/O pin with interrupt-on-change. |
| 11 | RB5 | bidirectional | Bidirectional TTL digital I/O pin with interrupt-on-change. |
| 12 | RB6 | bidirectional | Bidirectional TTL digital I/O pin with interrupt-on-change that also serves as the ICSP programming clock. |
| 13 | RB7 | bidirectional | Bidirectional TTL digital I/O pin with interrupt-on-change that also serves as the ICSP programming data pin. |
| 14 | VDD | power_in | Positive supply for logic and I/O pins. |
| 15 | OSC2/CLKOUT | output | Oscillator crystal output that connects to a crystal or resonator in crystal oscillator mode; in RC mode it outputs CLKOUT at 1/4 the OSC1 frequency. |
| 16 | OSC1/CLKIN | input | Oscillator crystal or external clock source input, using an ST buffer in RC mode and a CMOS buffer otherwise. |
| 17 | RA0/AN0 | bidirectional | Bidirectional TTL-compatible digital I/O pin that can also be used as analog input AN0. |
| 18 | RA1/AN1 | bidirectional | Bidirectional TTL-compatible digital I/O pin that can also be used as analog input AN1. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | PDIP-18 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 18 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage on any pin with respect to VSS (except VDD, MCLR, RA4) | -0.3 | V | Maximum printed as VDD + 0.3V; not a number, see review_required | 73 | |||
| Voltage on VDD with respect to VSS | -0.3 | 7.5 | V | 73 | |||
| Voltage on MCLR with respect to VSS | 0 | 13.25 | V | Note 2 | 73 | ||
| Voltage on RA4 with respect to VSS | 0 | 8.5 | V | 73 | |||
| Ambient temperature under bias | -55 | 125 | °C | 73 | |||
| Storage temperature | -65 | 150 | °C | 73 | |||
| Total power dissipation (PDIP and SOIC) | 1 | W | Note 1 | 73 | |||
| Input clamp current | IIK | 20 | mA | VI < 0 or VI > VDD | 73 | ||
| Output clamp current | IOK | 20 | mA | VO < 0 or VO > VDD | 73 | ||
| Maximum output current sunk by any I/O pin | 25 | mA | 73 | ||||
| Maximum output current sourced by any I/O pin | 25 | mA | 73 | ||||
| Operating ambient temperature, commercial | TA | 0 | 70 | °C | Commercial | 75 | |
| Operating ambient temperature, industrial | TA | -40 | 85 | °C | Industrial | 75 | |
| Operating ambient temperature, extended | TA | -40 | 125 | °C | Extended | 75 | |
| Supply voltage (XT, RC and LP osc mode) | VDD | 4 | 5.5 | V | XT, RC and LP osc mode | 75 | |
| Supply voltage (HS osc mode) | VDD | 4.5 | 5.5 | V | HS osc mode | 75 | |
| Supply voltage (BOR enabled) | VDD | 5.5 | V | BOR enabled (Note 7); minimum is VBOR, symbolic | 75 | ||
| VDD rise rate to ensure internal Power-on Reset | SVDD | 0.05 | V/ms | PWRT enabled (PWRTE bit clear) | 75 | ||
| Brown-out Reset voltage trip point | VBOR | 3.65 | 4.35 | V | BODEN bit set | 75 | |
| Supply current, 4 MHz | IDD | 0.8 | 2.5 | mA | FOSC = 4 MHz, VDD = 4.0V | 75 | |
| Supply current, 20 MHz | IDD | 4 | 8 | mA | FOSC = 20 MHz, VDD = 4.0V | 75 | |
| Power-down current, WDT enabled | IPD | 10.5 | 42 | µA | VDD = 4.0V, WDT enabled, -40C to +85C | 75 | |
| Power-down current, WDT disabled, commercial | IPD | 1.5 | 16 | µA | VDD = 4.0V, WDT disabled, 0C to +70C | 75 | |
| Power-down current, WDT disabled, industrial | IPD | 1.5 | 19 | µA | VDD = 4.0V, WDT disabled,-40C to +85C | 75 | |
| Power-down current, WDT disabled, extended | IPD | 2.5 | 19 | µA | VDD = 4.0V, WDT disabled,-40C to +125C | 75 | |
| Module differential current, Watchdog Timer | IWDT | 6 | 20 | µA | WDTE bit set, VDD = 4.0V | 75 | |
| Module differential current, Brown-out Reset | IBOR | 200 | µA | BODEN bit set, VDD = 5.0V | 75 | ||
| LP oscillator operating frequency | FOSC | 0 | 200 | KHz | All temperatures | 75 | |
| RC oscillator operating frequency | FOSC | 0 | 4 | MHz | All temperatures | 75 | |
| XT oscillator operating frequency | FOSC | 0 | 4 | MHz | All temperatures | 75 | |
| HS oscillator operating frequency | FOSC | 0 | 20 | MHz | All temperatures | 75 | |
| Input low voltage, I/O ports with TTL buffer | VIL | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 77 | ||
| Input high voltage, I/O ports with TTL buffer | VIH | 2 | V | 4.5V ≤ VDD ≤ 5.5V; maximum printed as VDD, see review_required | 77 | ||
| Input leakage current, I/O ports (pin at high impedance) | IIL | 1 | µA | VSS ≤ VPIN ≤ VDD, pin at high-impedance | 77 | ||
| Input leakage current, MCLR, RA4/T0CKI | IIL | 5 | µA | VSS ≤ VPIN ≤ VDD | 77 | ||
| Input leakage current, OSC1 | IIL | 5 | µA | VSS ≤ VPIN ≤ VDD, XT, HS and LP osc modes | 77 | ||
| PORTB weak pull-up current | IPURB | 50 | 250 | 400 | µA | VDD = 5V, VPIN = VSS | 77 |
| Output low voltage, I/O ports | VOL | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40C to +85C | 78 | ||
| Open-drain high voltage, RA4 pin | VOD | 8.5 | V | RA4 pin | 78 | ||
| Capacitive loading, OSC2 pin | COSC2 | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 78 | ||
| Capacitive loading, all I/O pins and OSC2 (RC mode) | CIO | 50 | pF | All I/O pins and OSC2 (in RC mode) | 78 | ||
| External CLKIN frequency (HS osc mode -20) | FOSC | 20 | MHz | HS osc mode (-20); minimum printed as DC | 81 | ||
| Oscillator period (HS osc mode -20) | TOSC | 50 | 250 | ns | HS osc mode (-20) | 81 | |
| Instruction cycle time | TCY | 200 | ns | TCY = 4/FOSC; maximum printed as DC | 81 | ||
| External clock in (OSC1) high or low time, HS oscillator | TOSL, TOSH | 15 | ns | HS oscillator | 81 | ||
| External clock in (OSC1) rise or fall time, HS oscillator | TOSR, TOSF | 15 | ns | HS oscillator | 81 | ||
| OSC1 to CLKOUT | TOSH2CKL | 75 | 200 | ns | Note 1 | 82 | |
| CLKOUT rise time | TCKR | 35 | 100 | ns | Note 1 | 82 | |
| OSC1 (Q1 cycle) to port out valid | TOSH2IOV | 50 | 150 | ns | 82 | ||
| OSC1 (Q2 cycle) to port input invalid (I/O in hold time) | TOSH2IOI | 100 | ns | Standard | 82 | ||
| Port output rise time | TIOR | 10 | 40 | ns | Standard | 82 | |
| Port output fall time | TIOF | 10 | 40 | ns | Standard | 82 | |
| CCP1 input low time (with prescaler) | TCCL | 10 | ns | With prescaler, Standard | 85 | ||
| CCP1 output rise time | TCCR | 10 | 25 | ns | Standard | 85 | |
| CCP1 output fall time | TCCF | 10 | 25 | ns | Standard | 85 |
CAD (KiCad official)
- Symbol:
PIC16C716-20 - Footprint:
Package_DIP:DIP-18_W7.62mm - 3D model: PDIP-18 (KiCad packages3D, STEP)
- 3D model files:
pic16c716-20-etched.step/pic16c716-20-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16c716-20.step/pic16c716-20.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (106 pp, sha256
e47d913a2758917f, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PIC16C716-20
**Microchip Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · PDIP-18
PIC16C716-20 from Microchip Tech, in a PDIP-18. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RA2/AN2 | bidirectional | Bidirectional TTL-compatible digital I/O pin that can also be used as analog input AN2. |
| 2 | RA3/AN3/VREF | bidirectional | Bidirectional TTL-compatible digital I/O pin that can also be used as analog input AN3 and as the A/D reference voltage input VREF. |
| 3 | RA4/T0CKI | bidirectional | Digital I/O with Schmitt-trigger input and open-drain output when configured as an output, which also serves as the Timer0 external clock input T0CKI. |
| 4 | MCLR/VPP | input | Active-low master clear (Reset) input to the device; VPP is the programming voltage input. |
| 5 | VSS | power_in | Ground reference for logic and I/O pins. |
| 6 | RB0/INT | bidirectional | Bidirectional TTL digital I/O pin with Schmitt-trigger input that also serves as the external interrupt input INT. |
| 7 | RB1/T1OSO/T1CKI | bidirectional | Bidirectional TTL digital I/O pin that also serves as the Timer1 oscillator output T1OSO (connects to crystal in oscillator mode) and the Timer1 external clock input T1CKI. |
| 8 | RB2/T1OSI | bidirectional | Bidirectional TTL digital I/O pin that also serves as the Timer1 oscillator input T1OSI (connects to crystal in oscillator mode). |
| 9 | RB3/CCP1 | bidirectional | Bidirectional TTL digital I/O pin that is multiplexed as Capture1 input, Compare1 output, or PWM1 output. |
| 10 | RB4 | bidirectional | Bidirectional TTL digital I/O pin with interrupt-on-change. |
| 11 | RB5 | bidirectional | Bidirectional TTL digital I/O pin with interrupt-on-change. |
| 12 | RB6 | bidirectional | Bidirectional TTL digital I/O pin with interrupt-on-change that also serves as the ICSP programming clock. |
| 13 | RB7 | bidirectional | Bidirectional TTL digital I/O pin with interrupt-on-change that also serves as the ICSP programming data pin. |
| 14 | VDD | power_in | Positive supply for logic and I/O pins. |
| 15 | OSC2/CLKOUT | output | Oscillator crystal output that connects to a crystal or resonator in crystal oscillator mode; in RC mode it outputs CLKOUT at 1/4 the OSC1 frequency. |
| 16 | OSC1/CLKIN | input | Oscillator crystal or external clock source input, using an ST buffer in RC mode and a CMOS buffer otherwise. |
| 17 | RA0/AN0 | bidirectional | Bidirectional TTL-compatible digital I/O pin that can also be used as analog input AN0. |
| 18 | RA1/AN1 | bidirectional | Bidirectional TTL-compatible digital I/O pin that can also be used as analog input AN1. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | PDIP-18 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 18 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage on any pin with respect to VSS (except VDD, MCLR, RA4) | | -0.3 | | | V | Maximum printed as VDD + 0.3V; not a number, see review_required | 73 |
| Voltage on VDD with respect to VSS | | -0.3 | | 7.5 | V | | 73 |
| Voltage on MCLR with respect to VSS | | 0 | | 13.25 | V | Note 2 | 73 |
| Voltage on RA4 with respect to VSS | | 0 | | 8.5 | V | | 73 |
| Ambient temperature under bias | | -55 | | 125 | °C | | 73 |
| Storage temperature | | -65 | | 150 | °C | | 73 |
| Total power dissipation (PDIP and SOIC) | | | | 1 | W | Note 1 | 73 |
| Input clamp current | IIK | | | 20 | mA | VI < 0 or VI > VDD | 73 |
| Output clamp current | IOK | | | 20 | mA | VO < 0 or VO > VDD | 73 |
| Maximum output current sunk by any I/O pin | | | | 25 | mA | | 73 |
| Maximum output current sourced by any I/O pin | | | | 25 | mA | | 73 |
| Operating ambient temperature, commercial | TA | 0 | | 70 | °C | Commercial | 75 |
| Operating ambient temperature, industrial | TA | -40 | | 85 | °C | Industrial | 75 |
| Operating ambient temperature, extended | TA | -40 | | 125 | °C | Extended | 75 |
| Supply voltage (XT, RC and LP osc mode) | VDD | 4 | | 5.5 | V | XT, RC and LP osc mode | 75 |
| Supply voltage (HS osc mode) | VDD | 4.5 | | 5.5 | V | HS osc mode | 75 |
| Supply voltage (BOR enabled) | VDD | | | 5.5 | V | BOR enabled (Note 7); minimum is VBOR, symbolic | 75 |
| VDD rise rate to ensure internal Power-on Reset | SVDD | 0.05 | | | V/ms | PWRT enabled (PWRTE bit clear) | 75 |
| Brown-out Reset voltage trip point | VBOR | 3.65 | | 4.35 | V | BODEN bit set | 75 |
| Supply current, 4 MHz | IDD | | 0.8 | 2.5 | mA | FOSC = 4 MHz, VDD = 4.0V | 75 |
| Supply current, 20 MHz | IDD | | 4 | 8 | mA | FOSC = 20 MHz, VDD = 4.0V | 75 |
| Power-down current, WDT enabled | IPD | | 10.5 | 42 | µA | VDD = 4.0V, WDT enabled, -40C to +85C | 75 |
| Power-down current, WDT disabled, commercial | IPD | | 1.5 | 16 | µA | VDD = 4.0V, WDT disabled, 0C to +70C | 75 |
| Power-down current, WDT disabled, industrial | IPD | | 1.5 | 19 | µA | VDD = 4.0V, WDT disabled,-40C to +85C | 75 |
| Power-down current, WDT disabled, extended | IPD | | 2.5 | 19 | µA | VDD = 4.0V, WDT disabled,-40C to +125C | 75 |
| Module differential current, Watchdog Timer | IWDT | | 6 | 20 | µA | WDTE bit set, VDD = 4.0V | 75 |
| Module differential current, Brown-out Reset | IBOR | | | 200 | µA | BODEN bit set, VDD = 5.0V | 75 |
| LP oscillator operating frequency | FOSC | 0 | | 200 | KHz | All temperatures | 75 |
| RC oscillator operating frequency | FOSC | 0 | | 4 | MHz | All temperatures | 75 |
| XT oscillator operating frequency | FOSC | 0 | | 4 | MHz | All temperatures | 75 |
| HS oscillator operating frequency | FOSC | 0 | | 20 | MHz | All temperatures | 75 |
| Input low voltage, I/O ports with TTL buffer | VIL | | | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 77 |
| Input high voltage, I/O ports with TTL buffer | VIH | 2 | | | V | 4.5V ≤ VDD ≤ 5.5V; maximum printed as VDD, see review_required | 77 |
| Input leakage current, I/O ports (pin at high impedance) | IIL | | | 1 | µA | VSS ≤ VPIN ≤ VDD, pin at high-impedance | 77 |
| Input leakage current, MCLR, RA4/T0CKI | IIL | | | 5 | µA | VSS ≤ VPIN ≤ VDD | 77 |
| Input leakage current, OSC1 | IIL | | | 5 | µA | VSS ≤ VPIN ≤ VDD, XT, HS and LP osc modes | 77 |
| PORTB weak pull-up current | IPURB | 50 | 250 | 400 | µA | VDD = 5V, VPIN = VSS | 77 |
| Output low voltage, I/O ports | VOL | | | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40C to +85C | 78 |
| Open-drain high voltage, RA4 pin | VOD | | | 8.5 | V | RA4 pin | 78 |
| Capacitive loading, OSC2 pin | COSC2 | | | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 78 |
| Capacitive loading, all I/O pins and OSC2 (RC mode) | CIO | | | 50 | pF | All I/O pins and OSC2 (in RC mode) | 78 |
| External CLKIN frequency (HS osc mode -20) | FOSC | | | 20 | MHz | HS osc mode (-20); minimum printed as DC | 81 |
| Oscillator period (HS osc mode -20) | TOSC | 50 | | 250 | ns | HS osc mode (-20) | 81 |
| Instruction cycle time | TCY | 200 | | | ns | TCY = 4/FOSC; maximum printed as DC | 81 |
| External clock in (OSC1) high or low time, HS oscillator | TOSL, TOSH | 15 | | | ns | HS oscillator | 81 |
| External clock in (OSC1) rise or fall time, HS oscillator | TOSR, TOSF | | | 15 | ns | HS oscillator | 81 |
| OSC1 to CLKOUT | TOSH2CKL | | 75 | 200 | ns | Note 1 | 82 |
| CLKOUT rise time | TCKR | | 35 | 100 | ns | Note 1 | 82 |
| OSC1 (Q1 cycle) to port out valid | TOSH2IOV | | 50 | 150 | ns | | 82 |
| OSC1 (Q2 cycle) to port input invalid (I/O in hold time) | TOSH2IOI | 100 | | | ns | Standard | 82 |
| Port output rise time | TIOR | | 10 | 40 | ns | Standard | 82 |
| Port output fall time | TIOF | | 10 | 40 | ns | Standard | 82 |
| CCP1 input low time (with prescaler) | TCCL | 10 | | | ns | With prescaler, Standard | 85 |
| CCP1 output rise time | TCCR | | 10 | 25 | ns | Standard | 85 |
| CCP1 output fall time | TCCF | | 10 | 25 | ns | Standard | 85 |
## CAD (KiCad official)
- Symbol: `PIC16C716-20`
- Footprint: `Package_DIP:DIP-18_W7.62mm`
- 3D model: PDIP-18 (KiCad packages3D, STEP)
- 3D model files: `pic16c716-20-etched.step` / `pic16c716-20-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic16c716-20.step` / `pic16c716-20.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/pic16c716-20-datasheet.pdf) (106 pp, sha256 `e47d913a2758917f`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic16c716-20-datasheet.pdf)