main
History Download
Ray Publish 0.1.0 0ebfa47

PIC16C71-04I

Microchip Tech · Pre-ordered MCUs · PDIP-18

PIC16C71-04I from Microchip Tech, in a PDIP-18. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RA2/AN2 bidirectional PORTA bi-directional TTL-buffered I/O pin that can also serve as analog input AN2.
2 RA3/AN3/VREF bidirectional PORTA bi-directional TTL-buffered I/O pin that can also serve as analog input AN3 or the analog reference voltage VREF.
3 RA4/T0CKI bidirectional PORTA bi-directional Schmitt-trigger I/O pin that can also be the clock input to the Timer0 module; its output is open drain type.
4 MCLR/VPP input Active-low master clear (reset) input to the device, or programming voltage input VPP (Schmitt-trigger buffer).
5 VSS power_in Ground reference for logic and I/O pins.
6 RB0/INT bidirectional PORTB bi-directional I/O pin with software-programmable weak pull-up that can also be the external interrupt pin INT, where the buffer becomes a Schmitt-trigger input.
7 RB1 bidirectional PORTB bi-directional TTL I/O pin with software-programmable internal weak pull-up.
8 RB2 bidirectional PORTB bi-directional TTL I/O pin with software-programmable internal weak pull-up.
9 RB3 bidirectional PORTB bi-directional TTL I/O pin with software-programmable internal weak pull-up.
10 RB4 bidirectional PORTB bi-directional TTL I/O pin with software-programmable internal weak pull-up; provides interrupt-on-change.
11 RB5 bidirectional PORTB bi-directional TTL I/O pin with software-programmable internal weak pull-up; provides interrupt-on-change.
12 RB6 bidirectional PORTB bi-directional I/O pin with software-programmable internal weak pull-up; provides interrupt-on-change and serves as the serial programming clock (Schmitt-trigger buffer in programming mode).
13 RB7 bidirectional PORTB bi-directional I/O pin with software-programmable internal weak pull-up; provides interrupt-on-change and serves as the serial programming data (Schmitt-trigger buffer in programming mode).
14 VDD power_in Positive supply for logic and I/O pins.
15 OSC2/CLKOUT output Crystal/resonator output in crystal oscillator mode; in RC mode it outputs CLKOUT at 1/4 the frequency of OSC1, denoting the instruction cycle rate.
16 OSC1/CLKIN input Oscillator crystal input or external clock source input (Schmitt-trigger buffer in RC oscillator mode, CMOS input otherwise).
17 RA0/AN0 bidirectional PORTA bi-directional TTL-buffered I/O pin that can also serve as analog input AN0.
18 RA1/AN1 bidirectional PORTA bi-directional TTL-buffered I/O pin that can also serve as analog input AN1.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package PDIP-18
Category Single Chip Microcomputer/Microcontroller
Pins 18

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input clamp current IIK -20 20 mA VI < 0 or VI > VDD 135
Output clamp current IOK -20 20 mA VO < 0 or VO > VDD 135
Maximum output current sunk by any I/O pin 25 mA 135
Maximum output current sourced by any I/O pin 20 mA 135
Maximum current sunk by PORTA 80 mA 135
Maximum current sourced by PORTA 50 mA 135
Maximum current sunk by PORTB 150 mA 135
Maximum current sourced by PORTB 100 mA 135
Voltage on VDD with respect to VSS -0.3 7.5 V 135
Voltage on MCLR with respect to VSS 0 14 V 135
Voltage on RA4 with respect to VSS 0 14 V 135
Maximum current out of VSS pin 150 mA 135
Maximum current into VDD pin 100 mA 135
Ambient temperature under bias -55 125 ˚C 135
Storage temperature -65 150 ˚C 135
Voltage on any pin with respect to VSS -0.3 V except VDD, MCLR, and RA4; upper limit is (VDD + 0.3V) 135
Operating temperature (industrial) TA -40 85 ˚C Industrial range, -40˚C ≤ TA ≤ +85˚C 136
Supply Voltage (XT, RC and LP osc configuration) VDD 4 6 V XT, RC and LP osc configuration 136
Supply Voltage (HS osc configuration) VDD 4.5 5.5 V HS osc configuration 136
VDD rise rate to ensure internal Power-on Reset signal SVDD 0.05 V/ms See section on Power-on Reset for details 136
Supply Current IDD 1.8 3.3 mA XT, RC osc configuration, FOSC = 4 MHz, VDD = 5.5V (Note 4) 136
Power-down Current IPD 7 28 µA VDD = 4.0V, WDT enabled, -40˚C to +85˚C 136
Power-down Current IPD 1 14 µA VDD = 4.0V, WDT disabled, -0˚C to +70˚C 136
Power-down Current IPD 1 16 µA VDD = 4.0V, WDT disabled, -40˚C to +85˚C 136
Input High Voltage, I/O ports with TTL buffer VIH 2 V 4.5 ≤ VDD ≤ 5.5V (maximum printed as VDD) 138
PORTB weak pull-up current IPURB 50 250 400 µA VDD = 5V, VPIN = VSS 138
Input Leakage Current, I/O ports IIL -1 1 µA Vss ≤ VPIN ≤ VDD, Pin at hi-impedance 138
Input Leakage Current, MCLR, RA4/T0CKI IIL -5 5 µA Vss ≤ VPIN ≤ VDD 138
Input Leakage Current, OSC1 IIL -5 5 µA Vss ≤ VPIN ≤ VDD, XT, HS and LP osc configuration 138
Output Low Voltage, I/O ports VOL 0.6 V IOL = 8.5mA, VDD = 4.5V, -40˚C to +85˚C 138
Output Low Voltage, OSC2/CLKOUT (RC osc config) VOL 0.6 V IOL = 1.6mA, VDD = 4.5V, -40˚C to +85˚C 138
Open-Drain High Voltage (characterized, not tested) VOD 14 V RA4 pin 138

CAD (KiCad official)

  • Symbol: PIC16C71-04I
  • Footprint: Package_DIP:DIP-18_W7.62mm
  • 3D model: PDIP-18 (KiCad packages3D, STEP)
  • 3D model files: pic16c71-04i-etched.step / pic16c71-04i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16c71-04i.step / pic16c71-04i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (177 pp, sha256 8c19972c9b3ff579, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF