3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC16C71-04
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · PDIP-18
PIC16C71-04 from Microchip Tech, in a PDIP-18. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RA2/AN2 | bidirectional | PORTA bidirectional I/O pin with TTL input buffer that can also be used as analog input 2. |
| 2 | RA3/AN3/VREF | bidirectional | PORTA bidirectional I/O pin with TTL input buffer that can also be analog input 3 or the analog reference voltage. |
| 3 | RA4/T0CKI | bidirectional | PORTA bidirectional I/O pin with Schmitt Trigger input that can also be the Timer0 clock input; output is open drain type. |
| 4 | MCLR/VPP | input | Active-low master clear (reset) input with Schmitt Trigger buffer, or programming voltage input. |
| 5 | VSS | power_in | Ground reference for logic and I/O pins. |
| 6 | RB0/INT | bidirectional | PORTB bidirectional I/O pin (TTL, Schmitt Trigger when used as external interrupt) with software-programmable weak pull-up that can also be the external interrupt pin. |
| 7 | RB1 | bidirectional | PORTB bidirectional I/O pin with TTL input buffer and software-programmable weak pull-up. |
| 8 | RB2 | bidirectional | PORTB bidirectional I/O pin with TTL input buffer and software-programmable weak pull-up. |
| 9 | RB3 | bidirectional | PORTB bidirectional I/O pin with TTL input buffer and software-programmable weak pull-up. |
| 10 | RB4 | bidirectional | PORTB bidirectional I/O pin with TTL input buffer and interrupt-on-change. |
| 11 | RB5 | bidirectional | PORTB bidirectional I/O pin with TTL input buffer and interrupt-on-change. |
| 12 | RB6 | bidirectional | PORTB bidirectional I/O pin with interrupt-on-change that also serves as the serial programming clock (Schmitt Trigger in programming mode). |
| 13 | RB7 | bidirectional | PORTB bidirectional I/O pin with interrupt-on-change that also serves as the serial programming data (Schmitt Trigger in programming mode). |
| 14 | VDD | power_in | Positive supply for logic and I/O pins. |
| 15 | OSC2/CLKOUT | output | Oscillator crystal output connecting to crystal or resonator; in RC mode outputs CLKOUT at 1/4 the OSC1 frequency, denoting the instruction cycle rate. |
| 16 | OSC1/CLKIN | input | Oscillator crystal input or external clock source input (Schmitt Trigger in RC mode, CMOS otherwise). |
| 17 | RA0/AN0 | bidirectional | PORTA bidirectional I/O pin with TTL input buffer that can also be used as analog input 0. |
| 18 | RA1/AN1 | bidirectional | PORTA bidirectional I/O pin with TTL input buffer that can also be used as analog input 1. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | PDIP-18 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 18 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (XT, RC and LP osc) | VDD | 4 | 6 | V | XT, RC and LP osc configuration | 136 | |
| Supply Voltage (HS osc) | VDD | 4.5 | 5.5 | V | HS osc configuration | 136 | |
| RAM Data Retention Voltage | VDR | 1.5 | V | 136 | |||
| VDD start voltage for Power-on Reset | VPOR | 0 | V | VSS; See section on Power-on Reset for details | 136 | ||
| VDD rise rate for Power-on Reset | SVDD | 0.05 | V/ms | See section on Power-on Reset for details | 136 | ||
| Supply Current | IDD | 1.8 | 3.3 | mA | XT, RC osc configuration FOSC = 4 MHz, VDD = 5.5V (Note 4) | 136 | |
| Power-down Current, WDT enabled | IPD | 7 | 28 | µA | VDD = 4.0V, WDT enabled, -40°C to +85°C | 136 | |
| Power-down Current, WDT disabled, 0 to 70°C | IPD | 1 | 14 | µA | VDD = 4.0V, WDT disabled, -0°C to +70°C | 136 | |
| Power-down Current, WDT disabled, -40 to 85°C | IPD | 1 | 16 | µA | VDD = 4.0V, WDT disabled, -40°C to +85°C | 136 | |
| Input Low Voltage, I/O ports TTL buffer | VIL | 0.15 | V | For entire VDD range (printed 'VSS - 0.15V') | 138 | ||
| Input Low Voltage, I/O ports | VIL | 0.8 | V | 4.5 ≤ VDD ≤ 5.5V | 138 | ||
| Input High Voltage, I/O ports TTL buffer | VIH | 2 | V | 4.5 ≤ VDD ≤ 5.5V | 138 | ||
| PORTB weak pull-up current | IPURB | 50 | 250 | 400 | µA | VDD = 5V, VPIN = VSS | 138 |
| Input Leakage Current, I/O ports | IIL | -1 | 1 | µA | Vss ≤ VPIN ≤ VDD, Pin at hi-impedance | 138 | |
| Input Leakage Current, MCLR, RA4/T0CKI | IIL | -5 | 5 | µA | Vss ≤ VPIN ≤ VDD | 138 | |
| Input Leakage Current, OSC1 | IIL | -5 | 5 | µA | Vss ≤ VPIN ≤ VDD, XT, HS and LP osc configuration | 138 | |
| Output Low Voltage, I/O ports | VOL | 0.6 | V | IOL = 8.5mA, VDD = 4.5V, -40°C to +85°C | 138 | ||
| Output Low Voltage, OSC2/CLKOUT (RC osc config) | VOL | 0.6 | V | IOL = 1.6mA, VDD = 4.5V, -40°C to +85°C | 138 | ||
| Open-Drain High Voltage, RA4 pin | VOD | 14 | V | RA4 pin | 138 | ||
| Ambient temperature under bias | -55 | 125 | °C | 135 | |||
| Storage temperature | -65 | 150 | °C | 135 | |||
| Voltage on any pin with respect to VSS (except VDD, MCLR, and RA4) | -0.3 | V | max printed as (VDD + 0.3V) | 135 | |||
| Voltage on VDD with respect to VSS | VDD | -0.3 | 7.5 | V | 135 | ||
| Voltage on MCLR with respect to VSS | 0 | 14 | V | Note 2 | 135 | ||
| Voltage on RA4 with respect to VSS | 0 | 14 | V | 135 | |||
| Maximum current out of VSS pin | 150 | mA | 135 | ||||
| Maximum current into VDD pin | 100 | mA | 135 | ||||
| Input clamp current | IIK | -20 | 20 | mA | VI < 0 or VI > VDD | 135 | |
| Output clamp current | IOK | -20 | 20 | mA | VO < 0 or VO > VDD | 135 | |
| Maximum output current sunk by any I/O pin | 25 | mA | 135 | ||||
| Maximum output current sourced by any I/O pin | 20 | mA | 135 | ||||
| Maximum current sunk by PORTA | 80 | mA | 135 | ||||
| Maximum current sourced by PORTA | 50 | mA | 135 | ||||
| Maximum current sunk by PORTB | 150 | mA | 135 | ||||
| Maximum current sourced by PORTB | 100 | mA | 135 | ||||
| Operating temperature (commercial) | TA | 0 | 70 | °C | commercial | 136 | |
| Operating temperature (industrial) | TA | -40 | 85 | °C | industrial | 136 |
CAD (KiCad official)
- Symbol:
PIC16C71-04 - Footprint:
Package_DIP:DIP-18_W7.62mm - 3D model: PDIP-18 (KiCad packages3D, STEP)
- 3D model files:
pic16c71-04-etched.step/pic16c71-04-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16c71-04.step/pic16c71-04.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (177 pp, sha256
8c19972c9b3ff579, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).