main
Ray pic16c62b-20-so: renamed from pic16c62b-20, the part it was built from (PIC16C62B-20/SO); family listed 7f43cb5

PIC16C62B-20/SO

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil

PIC16C62B-20 from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MCLR/VPP input Master clear (reset) input or programming voltage input, active low reset to the device.
2 RA0/AN0 bidirectional PORTA bidirectional I/O with TTL input buffer; RA0 can also be analog input 0.
3 RA1/AN1 bidirectional PORTA bidirectional I/O with TTL input buffer; RA1 can also be analog input 1.
4 RA2/AN2 bidirectional PORTA bidirectional I/O with TTL input buffer; RA2 can also be analog input 2.
5 RA3/AN3/VREF bidirectional PORTA bidirectional I/O with TTL input buffer; RA3 can also be analog input 3 or analog reference voltage.
6 RA4/T0CKI bidirectional PORTA bidirectional I/O with Schmitt Trigger input; RA4 can also be the Timer0 clock input and its output is open drain.
7 RA5/SS/AN4 bidirectional PORTA bidirectional I/O with TTL input buffer; RA5 can also be analog input 4 or the slave select for the synchronous serial port.
8 VSS power_in Ground reference for logic and I/O pins.
9 OSC1/CLKIN input Oscillator crystal input or external clock source input, Schmitt Trigger in RC oscillator mode and CMOS input otherwise.
10 OSC2/CLKOUT output Oscillator crystal output connecting to crystal or resonator; in RC mode it outputs CLKOUT at 1/4 the OSC1 frequency.
11 RC0/T1OSO/T1CKI bidirectional PORTC bidirectional I/O with Schmitt Trigger input; RC0 can also be the Timer1 oscillator output or Timer1 clock input.
12 RC1/T1OSI bidirectional PORTC bidirectional I/O with Schmitt Trigger input; RC1 can also be the Timer1 oscillator input.
13 RC2/CCP1 bidirectional PORTC bidirectional I/O with Schmitt Trigger input; RC2 can also be the Capture1 input, Compare1 output or PWM1 output.
14 RC3/SCK/SCL bidirectional PORTC bidirectional I/O with Schmitt Trigger input; RC3 can also be the synchronous serial clock input/output for both SPI and I2C modes.
15 RC4/SDI/SDA bidirectional PORTC bidirectional I/O with Schmitt Trigger input; RC4 can also be the SPI data input or I2C data I/O.
16 RC5/SDO bidirectional PORTC bidirectional I/O with Schmitt Trigger input; RC5 can also be the SPI data output.
17 RC6 bidirectional PORTC bidirectional I/O pin with Schmitt Trigger input buffer.
18 RC7 bidirectional PORTC bidirectional I/O pin with Schmitt Trigger input buffer.
19 VSS power_in Ground reference for logic and I/O pins.
20 VDD power_in Positive supply for logic and I/O pins.
21 RB0/INT bidirectional PORTB bidirectional I/O with TTL/Schmitt Trigger input; RB0 can also be the external interrupt pin.
22 RB1 bidirectional PORTB bidirectional I/O with TTL input buffer and software-programmable weak pull-up.
23 RB2 bidirectional PORTB bidirectional I/O with TTL input buffer and software-programmable weak pull-up.
24 RB3 bidirectional PORTB bidirectional I/O with TTL input buffer and software-programmable weak pull-up.
25 RB4 bidirectional PORTB bidirectional I/O with TTL input buffer; interrupt on change pin.
26 RB5 bidirectional PORTB bidirectional I/O with TTL input buffer; interrupt on change pin.
27 RB6 bidirectional PORTB bidirectional I/O with TTL/Schmitt Trigger input; interrupt on change pin and serial programming clock.
28 RB7 bidirectional PORTB bidirectional I/O with TTL/Schmitt Trigger input; interrupt on change pin and serial programming data.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-28-300mil
Category Single Chip Microcomputer/Microcontroller
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD 4 5.5 V XT, RC and LP osc mode 84
Supply voltage VDD 4.5 5.5 V HS osc mode 84
Supply voltage BOR enabled VBOR 5.5 V BOR enabled (Note 7) 84
Brown-out Reset voltage trip point VBOR 3.65 4.35 V BODEN bit set 84
RAM data retention voltage VDR 1.5 V 84
VDD rise rate SVDD 0.05 V/ms PWRT enabled (PWRTE bit clear) 84
Supply current IDD 2.7 5 mA XT, RC osc modes, FOSC = 4 MHz, VDD = 5.5V (Note 4) 84
Supply current IDD 10 20 mA HS osc mode, FOSC = 20 MHz, VDD = 5.5V 84
Watchdog Timer module differential current IWDT 6 20 µA WDTE BIT SET, VDD = 4.0V 84
Brown-out Reset module differential current IBOR 200 µA BODEN bit set, VDD = 5.0V 84
Input low voltage TTL buffer VIL 0.8 V 4.5V ≤ VDD ≤ 5.5V 86
Input high voltage TTL buffer VIH 2 V 4.5V ≤ VDD ≤ 5.5V 86
Input leakage current I/O ports IIL 1 µA Vss ≤ VPIN ≤ VDD, pin at hi-impedance 86
Input leakage current MCLR, RA4/T0CKI IIL 5 µA Vss ≤ VPIN ≤ VDD 86
Input leakage current OSC1 IIL 5 µA Vss ≤ VPIN ≤ VDD, XT, HS and LP osc modes 86
PORTB weak pull-up current IPURB 50 250 400 µA VDD = 5V, VPIN = VSS 86
Output low voltage I/O ports VOL 0.6 V IOL = 8.5 mA, VDD = 4.5V, -40C to +85C 86
Open-drain high voltage RA4 pin VOD 8.5 V RA4 pin 86
OSC2 pin capacitive loading COSC2 15 pF In XT, HS and LP modes when external clock is used to drive OSC1 87
All I/O pins and OSC2 capacitive loading CIO 50 pF 87
External CLKIN frequency HS -20 Fosc 20 MHz HS osc mode (-20) 90
External CLKIN period HS -20 Tosc 50 ns HS osc mode (-20) 90
Instruction cycle time TCY 200 ns TCY = 4/FOSC 90
External clock in OSC1 high or low time HS TosL, TosH 15 ns HS oscillator 90
External clock in OSC1 rise or fall time HS TosR, TosF 15 ns HS oscillator 90
Absolute maximum voltage on VDD with respect to VSS VDD -0.3 7.5 V 81
Absolute maximum voltage on MCLR with respect to VSS VMCLR 0 13.25 V Note 2 81
Absolute maximum voltage on RA4 with respect to VSS VRA4 0 8.5 V 81
Absolute maximum voltage on any pin with respect to VSS Vpin -0.3 V Except VDD, MCLR, and RA4; maximum is VDD + 0.3V 81
Total power dissipation Pdis 1 W Note 1 81
Input clamp current IIK 20 mA VI < 0 or VI > VDD 81
Output clamp current IOK 20 mA VO < 0 or VO > VDD 81
Ambient temperature under bias TA -55 125 °C 81
Storage temperature Tstg -65 150 °C 81
Operating temperature commercial TA 0 70 °C Commercial 84
Operating temperature industrial TA -40 85 °C Industrial 84
Operating temperature extended TA -40 125 °C Extended 84

CAD (KiCad official)

  • Symbol: PIC16C62B-20
  • Footprint: Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm
  • 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
  • 3D model files: pic16c62b-20-etched.step / pic16c62b-20-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16c62b-20.step / pic16c62b-20.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (122 pp, sha256 001eda69b9433079, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is PIC16C62B-20/SO. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • PIC16C62B-20/SP