main
Ray
Publish 0.1.0
c3b61b2
PIC16C622A-04
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-18-300mil
PIC16C622A-04 from Microchip Tech, in a SOIC-18-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RA2/AN2/VREF | bidirectional | Bidirectional PORTA I/O with Schmitt Trigger input, selectable as an analog comparator input or the VREF output. |
| 2 | RA3/AN3 | bidirectional | Bidirectional PORTA I/O with Schmitt Trigger input, serving as an analog comparator input/output. |
| 3 | RA4/T0CKI | bidirectional | Bidirectional PORTA I/O with Schmitt Trigger input; can be the Timer0 clock input or a comparator output, and the output is open drain. |
| 4 | MCLR/VPP | input | Active-low Master Clear (Reset) input to the device, also the programming voltage input. |
| 5 | VSS | power_in | Ground reference for logic and I/O pins. |
| 6 | RB0/INT | bidirectional | Bidirectional PORTB I/O with TTL/Schmitt Trigger input; can be selected as the external interrupt pin INT. |
| 7 | RB1 | bidirectional | Bidirectional PORTB I/O with TTL input; PORTB can be software-programmed for internal weak pull-up. |
| 8 | RB2 | bidirectional | Bidirectional PORTB I/O with TTL input; PORTB can be software-programmed for internal weak pull-up. |
| 9 | RB3 | bidirectional | Bidirectional PORTB I/O with TTL input; PORTB can be software-programmed for internal weak pull-up. |
| 10 | RB4 | bidirectional | Bidirectional PORTB I/O with TTL input; interrupt-on-change pin. |
| 11 | RB5 | bidirectional | Bidirectional PORTB I/O with TTL input; interrupt-on-change pin. |
| 12 | RB6 | bidirectional | Bidirectional PORTB I/O with TTL/Schmitt Trigger input; interrupt-on-change pin and serial programming clock. |
| 13 | RB7 | bidirectional | Bidirectional PORTB I/O with TTL/Schmitt Trigger input; interrupt-on-change pin and serial programming data. |
| 14 | VDD | power_in | Positive supply for logic and I/O pins. |
| 15 | OSC2/CLKOUT | output | Oscillator crystal output connecting to a crystal or resonator; in RC mode it outputs CLKOUT at 1/4 the OSC1 frequency. |
| 16 | OSC1/CLKIN | input | Oscillator crystal input and external clock source input (Schmitt Trigger/CMOS). |
| 17 | RA0/AN0 | bidirectional | Bidirectional PORTA I/O with Schmitt Trigger input, serving as an analog comparator input. |
| 18 | RA1/AN1 | bidirectional | Bidirectional PORTA I/O with Schmitt Trigger input, serving as an analog comparator input. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-18-300mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 18 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 3 | 5.5 | V | See Figures 12-1, 12-2, 12-3, 12-4, and 12-5 | 92 | |
| VDD rise rate to ensure Power-on Reset | SVDD | 0.05 | V/ms | See section on Power-on Reset for details | 92 | ||
| Brown-out Detect Voltage | VBOR | 3.7 | 4 | 4.35 | V | BOREN configuration bit is cleared | 92 |
| Supply Current | IDD | 1.2 | 2 | mA | FOSC = 4 MHz, VDD = 5.5V, WDT disabled, XT mode, (Note 4)* | 93 | |
| Supply Current | IDD | 0.4 | 1.2 | mA | FOSC = 4 MHz, VDD = 3.0V, WDT disabled, XT mode, (Note 4)* | 93 | |
| Supply Current | IDD | 1 | 2 | mA | FOSC = 10 MHz, VDD = 3.0V, WDT disabled, HS mode, (Note 6) | 93 | |
| Supply Current | IDD | 4 | 6 | mA | FOSC = 20 MHz, VDD = 4.5V, WDT disabled, HS mode | 93 | |
| Supply Current | IDD | 4 | 7 | mA | FOSC = 20 MHz, VDD = 5.5V, WDT disabled*, HS mode | 93 | |
| Supply Current | IDD | 35 | 70 | µA | FOSC = 32 kHz, VDD = 3.0V, WDT disabled, LP mode | 93 | |
| Power-down Current | IPD | 2.2 | µA | VDD = 3.0V | 93 | ||
| Power-down Current | IPD | 5 | µA | VDD = 4.5V* | 93 | ||
| Power-down Current | IPD | 9 | µA | VDD = 5.5V | 93 | ||
| Power-down Current | IPD | 15 | µA | VDD = 5.5V Extended Temp. | 93 | ||
| Input Low Voltage, I/O ports with TTL buffer | VIL | 0.8 | V | VDD = 4.5V to 5.5V | 98 | ||
| Input Low Voltage, I/O ports with Schmitt Trigger input | VIL | 0.2 | VDD | 98 | |||
| Input Low Voltage, MCLR, RA4/T0CKI, OSC1 (in RC mode) | VIL | 0.2 | VDD | (Note 1) | 98 | ||
| Input Low Voltage, OSC1 (in XT and HS) | VIL | 0.3 | VDD | 98 | |||
| Input High Voltage, I/O ports with TTL buffer | VIH | 2 | V | VDD = 4.5V to 5.5V | 98 | ||
| Input High Voltage, I/O ports with Schmitt Trigger input | VIH | 0.8 | VDD | 98 | |||
| Input High Voltage, MCLR, RA4/T0CKI | VIH | 0.8 | VDD | 98 | |||
| Input High Voltage, OSC1 (XT, HS and LP) | VIH | 0.7 | VDD | 98 | |||
| Input High Voltage, OSC1 (in RC mode) | VIH | 0.9 | VDD | (Note 1) | 98 | ||
| PORTB weak pull-up current | IPURB | 50 | 200 | 400 | µA | VDD = 5.0V, VPIN = VSS | 99 |
| Input Leakage Current, I/O ports (except PORTA) | IIL | -1 | 1 | µA | VSS ≤ VPIN ≤ VDD, pin at hi-impedance | 99 | |
| Input Leakage Current, PORTA | IIL | -0.5 | 0.5 | µA | Vss ≤ VPIN ≤ VDD, pin at hi-impedance | 99 | |
| Input Leakage Current, RA4/T0CKI | IIL | -1 | 1 | µA | Vss ≤ VPIN ≤ VDD | 99 | |
| Input Leakage Current, OSC1, MCLR | IIL | -5 | 5 | µA | Vss ≤ VPIN ≤ VDD, XT, HS and LP osc configuration | 99 | |
| Output Low Voltage, I/O ports | VOL | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40° to +85°C | 99 | ||
| Output Low Voltage, OSC2/CLKOUT (RC only) | VOL | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V, -40° to +85°C | 99 | ||
| Open-Drain High Voltage, RA4 pin | VOD | 8.5 | V | RA4 pin PIC16C62XA, PIC16LC62XA, PIC16CR62XA, PIC16LCR62XA | 100 | ||
| Capacitive loading, OSC2 pin | COSC2 | 15 | pF | In XT, HS and LP modes when external clock used to drive OSC1. | 100 | ||
| Capacitive loading, All I/O pins/OSC2 (in RC mode) | CIO | 50 | pF | 100 | |||
| LP Oscillator Operating Frequency | FOSC | 0 | 200 | kHz | All temperatures | 94 | |
| RC Oscillator Operating Frequency | FOSC | 0 | 4 | MHz | All temperatures | 94 | |
| XT Oscillator Operating Frequency | FOSC | 0 | 4 | MHz | All temperatures | 94 | |
| HS Oscillator Operating Frequency | FOSC | 0 | 20 | MHz | All temperatures | 94 | |
| External CLKIN Period, XT and RC Osc mode | Tosc | 250 | ns | XT and RC Osc mode | 106 | ||
| External CLKIN Period, HS Osc mode | Tosc | 50 | ns | HS Osc mode | 106 | ||
| External CLKIN Period, LP Osc mode | Tosc | 5 | µs | LP Osc mode | 106 | ||
| T0CKI High Pulse Width | Tt0H | 10 | ns | With Prescaler | 110 | ||
| T0CKI Low Pulse Width | Tt0L | 10 | ns | With Prescaler | 110 | ||
| Ambient Temperature under bias | -40 | 125 | °C | 83 | |||
| Storage Temperature | -65 | 150 | °C | 83 | |||
| Voltage on any pin with respect to VSS (except VDD and MCLR) | -0.6 | V | Printed maximum VDD +0.6V | 83 | |||
| Voltage on VDD with respect to VSS | 0 | 7.5 | V | 83 | |||
| Voltage on MCLR with respect to VSS | 0 | 14 | V | Note 2 | 83 | ||
| Total power Dissipation | 1 | W | Note 1 | 83 | |||
| Input Clamp Current | IIK | -20 | 20 | mA | VI <0 or VI> VDD | 83 | |
| Output Clamp Current | IOK | -20 | 20 | mA | VO <0 or VO>VDD | 83 | |
| Maximum Output Current sunk by any I/O pin | 25 | mA | 83 | ||||
| Maximum Output Current sourced by any I/O pin | 25 | mA | 83 |
CAD (KiCad official)
- Symbol:
PIC16C622A-04 - Footprint:
Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm - 3D model: SOIC-18-300mil (KiCad packages3D, STEP)
- 3D model files:
pic16c622a-04-etched.step/pic16c622a-04-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16c622a-04.step/pic16c622a-04.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (128 pp, sha256
c793591b01696c5d, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PIC16C622A-04
**Microchip Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-18-300mil
PIC16C622A-04 from Microchip Tech, in a SOIC-18-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RA2/AN2/VREF | bidirectional | Bidirectional PORTA I/O with Schmitt Trigger input, selectable as an analog comparator input or the VREF output. |
| 2 | RA3/AN3 | bidirectional | Bidirectional PORTA I/O with Schmitt Trigger input, serving as an analog comparator input/output. |
| 3 | RA4/T0CKI | bidirectional | Bidirectional PORTA I/O with Schmitt Trigger input; can be the Timer0 clock input or a comparator output, and the output is open drain. |
| 4 | MCLR/VPP | input | Active-low Master Clear (Reset) input to the device, also the programming voltage input. |
| 5 | VSS | power_in | Ground reference for logic and I/O pins. |
| 6 | RB0/INT | bidirectional | Bidirectional PORTB I/O with TTL/Schmitt Trigger input; can be selected as the external interrupt pin INT. |
| 7 | RB1 | bidirectional | Bidirectional PORTB I/O with TTL input; PORTB can be software-programmed for internal weak pull-up. |
| 8 | RB2 | bidirectional | Bidirectional PORTB I/O with TTL input; PORTB can be software-programmed for internal weak pull-up. |
| 9 | RB3 | bidirectional | Bidirectional PORTB I/O with TTL input; PORTB can be software-programmed for internal weak pull-up. |
| 10 | RB4 | bidirectional | Bidirectional PORTB I/O with TTL input; interrupt-on-change pin. |
| 11 | RB5 | bidirectional | Bidirectional PORTB I/O with TTL input; interrupt-on-change pin. |
| 12 | RB6 | bidirectional | Bidirectional PORTB I/O with TTL/Schmitt Trigger input; interrupt-on-change pin and serial programming clock. |
| 13 | RB7 | bidirectional | Bidirectional PORTB I/O with TTL/Schmitt Trigger input; interrupt-on-change pin and serial programming data. |
| 14 | VDD | power_in | Positive supply for logic and I/O pins. |
| 15 | OSC2/CLKOUT | output | Oscillator crystal output connecting to a crystal or resonator; in RC mode it outputs CLKOUT at 1/4 the OSC1 frequency. |
| 16 | OSC1/CLKIN | input | Oscillator crystal input and external clock source input (Schmitt Trigger/CMOS). |
| 17 | RA0/AN0 | bidirectional | Bidirectional PORTA I/O with Schmitt Trigger input, serving as an analog comparator input. |
| 18 | RA1/AN1 | bidirectional | Bidirectional PORTA I/O with Schmitt Trigger input, serving as an analog comparator input. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-18-300mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 18 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 3 | | 5.5 | V | See Figures 12-1, 12-2, 12-3, 12-4, and 12-5 | 92 |
| VDD rise rate to ensure Power-on Reset | SVDD | 0.05 | | | V/ms | See section on Power-on Reset for details | 92 |
| Brown-out Detect Voltage | VBOR | 3.7 | 4 | 4.35 | V | BOREN configuration bit is cleared | 92 |
| Supply Current | IDD | | 1.2 | 2 | mA | FOSC = 4 MHz, VDD = 5.5V, WDT disabled, XT mode, (Note 4)* | 93 |
| Supply Current | IDD | | 0.4 | 1.2 | mA | FOSC = 4 MHz, VDD = 3.0V, WDT disabled, XT mode, (Note 4)* | 93 |
| Supply Current | IDD | | 1 | 2 | mA | FOSC = 10 MHz, VDD = 3.0V, WDT disabled, HS mode, (Note 6) | 93 |
| Supply Current | IDD | | 4 | 6 | mA | FOSC = 20 MHz, VDD = 4.5V, WDT disabled, HS mode | 93 |
| Supply Current | IDD | | 4 | 7 | mA | FOSC = 20 MHz, VDD = 5.5V, WDT disabled*, HS mode | 93 |
| Supply Current | IDD | | 35 | 70 | µA | FOSC = 32 kHz, VDD = 3.0V, WDT disabled, LP mode | 93 |
| Power-down Current | IPD | | | 2.2 | µA | VDD = 3.0V | 93 |
| Power-down Current | IPD | | | 5 | µA | VDD = 4.5V* | 93 |
| Power-down Current | IPD | | | 9 | µA | VDD = 5.5V | 93 |
| Power-down Current | IPD | | | 15 | µA | VDD = 5.5V Extended Temp. | 93 |
| Input Low Voltage, I/O ports with TTL buffer | VIL | | | 0.8 | V | VDD = 4.5V to 5.5V | 98 |
| Input Low Voltage, I/O ports with Schmitt Trigger input | VIL | | | 0.2 | VDD | | 98 |
| Input Low Voltage, MCLR, RA4/T0CKI, OSC1 (in RC mode) | VIL | | | 0.2 | VDD | (Note 1) | 98 |
| Input Low Voltage, OSC1 (in XT and HS) | VIL | | | 0.3 | VDD | | 98 |
| Input High Voltage, I/O ports with TTL buffer | VIH | 2 | | | V | VDD = 4.5V to 5.5V | 98 |
| Input High Voltage, I/O ports with Schmitt Trigger input | VIH | 0.8 | | | VDD | | 98 |
| Input High Voltage, MCLR, RA4/T0CKI | VIH | 0.8 | | | VDD | | 98 |
| Input High Voltage, OSC1 (XT, HS and LP) | VIH | 0.7 | | | VDD | | 98 |
| Input High Voltage, OSC1 (in RC mode) | VIH | 0.9 | | | VDD | (Note 1) | 98 |
| PORTB weak pull-up current | IPURB | 50 | 200 | 400 | µA | VDD = 5.0V, VPIN = VSS | 99 |
| Input Leakage Current, I/O ports (except PORTA) | IIL | -1 | | 1 | µA | VSS ≤ VPIN ≤ VDD, pin at hi-impedance | 99 |
| Input Leakage Current, PORTA | IIL | -0.5 | | 0.5 | µA | Vss ≤ VPIN ≤ VDD, pin at hi-impedance | 99 |
| Input Leakage Current, RA4/T0CKI | IIL | -1 | | 1 | µA | Vss ≤ VPIN ≤ VDD | 99 |
| Input Leakage Current, OSC1, MCLR | IIL | -5 | | 5 | µA | Vss ≤ VPIN ≤ VDD, XT, HS and LP osc configuration | 99 |
| Output Low Voltage, I/O ports | VOL | | | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40° to +85°C | 99 |
| Output Low Voltage, OSC2/CLKOUT (RC only) | VOL | | | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V, -40° to +85°C | 99 |
| Open-Drain High Voltage, RA4 pin | VOD | | | 8.5 | V | RA4 pin PIC16C62XA, PIC16LC62XA, PIC16CR62XA, PIC16LCR62XA | 100 |
| Capacitive loading, OSC2 pin | COSC2 | | | 15 | pF | In XT, HS and LP modes when external clock used to drive OSC1. | 100 |
| Capacitive loading, All I/O pins/OSC2 (in RC mode) | CIO | | | 50 | pF | | 100 |
| LP Oscillator Operating Frequency | FOSC | 0 | | 200 | kHz | All temperatures | 94 |
| RC Oscillator Operating Frequency | FOSC | 0 | | 4 | MHz | All temperatures | 94 |
| XT Oscillator Operating Frequency | FOSC | 0 | | 4 | MHz | All temperatures | 94 |
| HS Oscillator Operating Frequency | FOSC | 0 | | 20 | MHz | All temperatures | 94 |
| External CLKIN Period, XT and RC Osc mode | Tosc | 250 | | | ns | XT and RC Osc mode | 106 |
| External CLKIN Period, HS Osc mode | Tosc | 50 | | | ns | HS Osc mode | 106 |
| External CLKIN Period, LP Osc mode | Tosc | 5 | | | µs | LP Osc mode | 106 |
| T0CKI High Pulse Width | Tt0H | 10 | | | ns | With Prescaler | 110 |
| T0CKI Low Pulse Width | Tt0L | 10 | | | ns | With Prescaler | 110 |
| Ambient Temperature under bias | | -40 | | 125 | °C | | 83 |
| Storage Temperature | | -65 | | 150 | °C | | 83 |
| Voltage on any pin with respect to VSS (except VDD and MCLR) | | -0.6 | | | V | Printed maximum VDD +0.6V | 83 |
| Voltage on VDD with respect to VSS | | 0 | | 7.5 | V | | 83 |
| Voltage on MCLR with respect to VSS | | 0 | | 14 | V | Note 2 | 83 |
| Total power Dissipation | | | | 1 | W | Note 1 | 83 |
| Input Clamp Current | IIK | -20 | | 20 | mA | VI <0 or VI> VDD | 83 |
| Output Clamp Current | IOK | -20 | | 20 | mA | VO <0 or VO>VDD | 83 |
| Maximum Output Current sunk by any I/O pin | | | | 25 | mA | | 83 |
| Maximum Output Current sourced by any I/O pin | | | | 25 | mA | | 83 |
## CAD (KiCad official)
- Symbol: `PIC16C622A-04`
- Footprint: `Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm`
- 3D model: SOIC-18-300mil (KiCad packages3D, STEP)
- 3D model files: `pic16c622a-04-etched.step` / `pic16c622a-04-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic16c622a-04.step` / `pic16c622a-04.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/pic16c622a-04-datasheet.pdf) (128 pp, sha256 `c793591b01696c5d`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic16c622a-04-datasheet.pdf)