main
History Download
Ray Publish 0.1.0 26046e9

PIC16C56-RC

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · PDIP-18

PIC16C56-RC from Microchip Tech, in a PDIP-18. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RA2 bidirectional Bi-directional I/O port pin RA2 with TTL input buffer.
2 RA3 bidirectional Bi-directional I/O port pin RA3 with TTL input buffer.
3 T0CKI input Clock input to Timer0 with Schmitt Trigger input; must be tied to VSS or VDD if not in use to reduce current consumption.
4 MCLR/VPP input Master clear (RESET) input, active low, and programming voltage input; voltage on this pin must not exceed VDD to avoid unintended entry into Programming mode.
5 VSS power_in Ground reference for logic and I/O pins.
6 RB0 bidirectional Bi-directional I/O port pin RB0 with TTL input buffer.
7 RB1 bidirectional Bi-directional I/O port pin RB1 with TTL input buffer.
8 RB2 bidirectional Bi-directional I/O port pin RB2 with TTL input buffer.
9 RB3 bidirectional Bi-directional I/O port pin RB3 with TTL input buffer.
10 RB4 bidirectional Bi-directional I/O port pin RB4 with TTL input buffer.
11 RB5 bidirectional Bi-directional I/O port pin RB5 with TTL input buffer.
12 RB6 bidirectional Bi-directional I/O port pin RB6 with TTL input buffer.
13 RB7 bidirectional Bi-directional I/O port pin RB7 with TTL input buffer.
14 VDD power_in Positive supply for logic and I/O pins.
15 OSC2/CLKOUT output Oscillator crystal output connecting to crystal or resonator in crystal oscillator mode; in RC mode outputs CLKOUT at 1/4 the OSC1 frequency, denoting the instruction cycle rate.
16 OSC1/CLKIN input Oscillator crystal input with Schmitt Trigger, or external clock source input.
17 RA0 bidirectional Bi-directional I/O port pin RA0 with TTL input buffer.
18 RA1 bidirectional Bi-directional I/O port pin RA1 with TTL input buffer.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package PDIP-18
Category Single Chip Microcomputer/Microcontroller
Pins 18

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (PIC16C5X-RC) VDD 3 6.25 V 68
VDD Rise Rate to ensure Power-on Reset SVDD 0.05 V/ms See Section 5.1 for details on Power-on Reset 68
Supply Current (PIC16C5X-RC, FOSC 4 MHz) IDD 1.8 3.3 mA FOSC = 4 MHz, VDD = 5.5V 68
Power-down Current, WDT enabled IPD 4 12 µA VDD = 3.0V, WDT enabled 68
Power-down Current, WDT disabled IPD 0.6 9 µA VDD = 3.0V, WDT disabled 68
Input leakage current, I/O ports IIL -1 0.5 1 µA For VDD ≤ 5.5V: VSS ≤ VPIN ≤ VDD, pin at hi-impedance 71
Input leakage current, MCLR (VPIN = VSS + 0.25V) IIL -5 µA VPIN = VSS + 0.25V 71
Input leakage current, MCLR (VPIN = VDD) IIL 0.5 5 µA VPIN = VDD 71
Input leakage current, T0CKI IIL -3 0.5 3 µA VSS ≤ VPIN ≤ VDD 71
Input High Voltage, I/O ports VIH 2 V 4.0V < VDD ≤ 5.5V 71
Output Low Voltage, I/O ports VOL 0.6 V IOL = 8.7 mA, VDD = 4.5V 71
Output Low Voltage, OSC2/CLKOUT (RC mode) VOL 0.6 V IOL = 1.6 mA, VDD = 4.5V, PIC16C5X-RC 71
Voltage on VDD with respect to VSS VDD 0 7.5 V 67
Voltage on MCLR with respect to VSS 0 14 V 67
Voltage on all other pins with respect to VSS -0.6 V Upper limit is (VDD + 0.6V) 67
Ambient temperature under bias -55 125 °C 67
Storage temperature -65 150 °C 67
Max. current out of VSS pin 150 mA 67
Max. current into VDD pin 100 mA 67
Max. current into an input pin (T0CKI only) -500 500 µA 67
Input clamp current IIK -20 20 mA VI < 0 or VI > VDD 67
Output clamp current IOK -20 20 mA VO < 0 or VO > VDD 67
Max. output current sunk by any I/O pin 25 mA 67
Max. output current sourced by any I/O pin 20 mA 67
Max. output current sourced by a single I/O port (PORTA, B or C) 40 mA 67
Max. output current sunk by a single I/O port (PORTA, B or C) 50 mA 67
Oscillator Frequency (RC OSC mode) FOSC 4 MHz RC OSC mode 74
Oscillator Period (RC OSC mode) TOSC 250 ns RC OSC mode 75
OSC1 to CLKOUT (low) TosH2ckL 15 30 ns 76
OSC1 to CLKOUT (high) TosH2ckH 15 30 ns 76
CLKOUT rise time TckR 5 15 ns 76
CLKOUT fall time TckF 5 15 ns 76
CLKOUT to Port out valid TckL2ioV 40 ns 76
Port in hold after CLKOUT TckH2ioI 0 ns 76
OSC1 (Q1 cycle) to Port out valid TosH2ioV 100 ns 76
Port output rise time TioR 10 25 ns 76
Port output fall time TioF 10 25 ns 76
MCLR Pulse Width (low) TmcL 100 ns VDD = 5.0V 77
Watchdog Timer Time-out Period (No Prescaler) Twdt 9 18 30 ms VDD = 5.0V (Comm) 77
Device Reset Timer Period TDRT 9 18 30 ms VDD = 5.0V (Comm) 77
I/O Hi-impedance from MCLR Low TioZ 100 ns 77
T0CKI High Pulse Width, with prescaler Tt0H 10 ns With Prescaler 78
T0CKI Low Pulse Width, with prescaler Tt0L 10 ns With Prescaler 78

CAD (KiCad official)

  • Symbol: PIC16C56-RC
  • Footprint: Package_DIP:DIP-18_W7.62mm
  • 3D model: PDIP-18 (KiCad packages3D, STEP)
  • 3D model files: pic16c56-rc-etched.step / pic16c56-rc-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16c56-rc.step / pic16c56-rc.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (192 pp, sha256 cd193beed4e3e72c, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF