3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC12LF1571-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · MSOP-8
PIC12LF1571-I from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply; the PIC12LF1571 operating voltage range is stated as 1.8V to 3.6V. |
| 2 | RA5 | bidirectional | General purpose I/O with Interrupt-on-Change and weak pull-up; alternate functions are T1CKI, PWM1 and CWG1A (selectable via APFCON), and CLKIN as the external clock input in EC mode. |
| 3 | RA4 | bidirectional | General purpose I/O with Interrupt-on-Change and weak pull-up; alternate functions are AN3, C1IN1-, T1G, PWM2, CWG1B and CLKOUT (FOSC/4 output). |
| 4 | RA3 | input | Input-only general purpose pin with Interrupt-on-Change and weak pull-up; it functions as MCLR (master clear with internal pull-up) or as the VPP programming voltage, and its TRISA bit always reads '1'. |
| 5 | RA2 | bidirectional | General purpose I/O with Interrupt-on-Change and weak pull-up; alternate functions are AN2, C1OUT, T0CKI, INT, PWM3, CWG1A and CWG1FLT (fault input). |
| 6 | RA1 | bidirectional | General purpose I/O with Interrupt-on-Change and weak pull-up; alternate functions are AN1, VREF+ (ADC voltage reference input), C1IN0-, PWM1, and ICSPCLK/ICDCLK for programming and debug. |
| 7 | RA0 | bidirectional | General purpose I/O with Interrupt-on-Change and weak pull-up; alternate functions are AN0, C1IN+, DACOUT, CWG1B and PWM2, and ICSPDAT/ICDDAT for programming and debug. |
| 8 | VSS | power_in | Ground reference for the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 125 | °C | 259 | |||
| Storage temperature | -65 | 150 | °C | 259 | |||
| Voltage on VDD pin with respect to VSS | VDD | -0.3 | 4 | V | PIC12LF1571/2 | 259 | |
| Voltage on MCLR pin with respect to VSS | -0.3 | 9 | V | 259 | |||
| Maximum current on VSS pin | 250 | mA | -40°C ≤ TA ≤ +85°C | 259 | |||
| Maximum current on VDD pin | 250 | mA | -40°C ≤ TA ≤ +85°C | 259 | |||
| Current sunk by any standard I/O pin | 50 | mA | 259 | ||||
| Current sourced by any standard I/O pin | 50 | mA | 259 | ||||
| Clamp current | IK | 20 | mA | VPIN < 0 or VPIN > VDD | 259 | ||
| Operating supply voltage VDDMIN | VDDMIN | 1.8 | V | FOSC ≤ 16 MHz | 260 | ||
| Operating supply voltage VDDMIN | VDDMIN | 2.5 | V | FOSC ≤ 32 MHz | 260 | ||
| Operating supply voltage VDDMAX | VDDMAX | 3.6 | V | 260 | |||
| Operating ambient temperature TA_MIN (industrial) | TA_MIN | -40 | °C | Industrial temperature | 260 | ||
| Operating ambient temperature TA_MAX (industrial) | TA_MAX | 85 | °C | Industrial temperature | 260 | ||
| RAM data retention voltage | VDR | 1.5 | V | Device in Sleep mode | 262 | ||
| Power-on Reset release voltage | VPOR | 1.6 | V | 262 | |||
| Power-on Reset rearm voltage | VPORR | 0.8 | V | 262 | |||
| Fixed Voltage Reference voltage | VFVR | 1.024 | V | -40°C ≤ TA ≤ +85°C | 262 | ||
| FVR gain voltage accuracy for ADC, 1x | VADFVR | -4 | 4 | % | 1x VFVR, ADFVR = 01, VDD ≥ 2.5V | 262 | |
| FVR gain voltage accuracy for ADC, 2x | VADFVR | -4 | 4 | % | 2x VFVR, ADFVR = 10, VDD ≥ 2.5V | 262 | |
| FVR gain voltage accuracy for Comparator, 1x | VCDAFVR | -4 | 4 | % | 1x VFVR, CDAFVR = 01, VDD ≥ 2.5V | 262 | |
| FVR gain voltage accuracy for Comparator, 2x | VCDAFVR | -4 | 4 | % | 2x VFVR, CDAFVR = 10, VDD ≥ 2.5V | 262 | |
| VDD Rise Rate | SVDD | 0.05 | V/ms | Ensures that the Power-on Reset signal is released properly | 262 | ||
| Supply current IDD, FOSC = 1 MHz ECM Medium Power | IDD | 35 | 44 | µA | FOSC = 1 MHz, External Clock (ECM), Medium Power mode, VDD = 1.8V | 264 | |
| Supply current IDD, FOSC = 1 MHz ECM Medium Power | IDD | 60 | 69 | µA | FOSC = 1 MHz, External Clock (ECM), Medium Power mode, VDD = 3.0V | 264 | |
| Supply current IDD, FOSC = 4 MHz ECM Medium Power | IDD | 116 | 132 | µA | FOSC = 4 MHz, External Clock (ECM), Medium Power mode, VDD = 1.8V | 264 | |
| Supply current IDD, FOSC = 4 MHz ECM Medium Power | IDD | 203 | 233 | µA | FOSC = 4 MHz, External Clock (ECM), Medium Power mode, VDD = 3.0V | 264 | |
| Supply current IDD, FOSC = 31 kHz LFINTOSC | IDD | 5.5 | 11 | µA | FOSC = 31 kHz, LFINTOSC, -40°C ≤ TA ≤ +85°C, VDD = 1.8V | 264 | |
| Supply current IDD, FOSC = 31 kHz LFINTOSC | IDD | 7.3 | 12 | µA | FOSC = 31 kHz, LFINTOSC, -40°C ≤ TA ≤ +85°C, VDD = 3.0V | 264 | |
| Supply current IDD, FOSC = 500 kHz MFINTOSC | IDD | 111 | 151 | µA | FOSC = 500 kHz, MFINTOSC, VDD = 1.8V | 264 | |
| Supply current IDD, FOSC = 500 kHz MFINTOSC | IDD | 133 | 176 | µA | FOSC = 500 kHz, MFINTOSC, VDD = 3.0V | 264 | |
| Supply current IDD, FOSC = 8 MHz HFINTOSC | IDD | 0.5 | 0.6 | mA | FOSC = 8 MHz, HFINTOSC, VDD = 1.8V | 264 | |
| Supply current IDD, FOSC = 8 MHz HFINTOSC | IDD | 0.7 | 0.9 | mA | FOSC = 8 MHz, HFINTOSC, VDD = 3.0V | 264 | |
| Supply current IDD, FOSC = 16 MHz HFINTOSC | IDD | 0.7 | 0.8 | mA | FOSC = 16 MHz, HFINTOSC, VDD = 1.8V | 264 | |
| Supply current IDD, FOSC = 16 MHz HFINTOSC | IDD | 1.1 | 1.2 | mA | FOSC = 16 MHz, HFINTOSC, VDD = 3.0V | 264 | |
| Supply current IDD, FOSC = 32 MHz HFINTOSC | IDD | 2 | 2.4 | mA | FOSC = 32 MHz, HFINTOSC (Note 3), VDD = 3.0V | 265 | |
| Supply current IDD, FOSC = 32 MHz External Clock ECH High-Power | IDD | 1.7 | 1.9 | mA | FOSC = 32 MHz, External Clock (ECH), High-Power mode (Note 3), VDD = 3.0V | 265 | |
| Supply current IDD, FOSC = 32 kHz External Clock ECL Low-Power | IDD | 2.2 | 5.9 | µA | FOSC = 32 kHz, External Clock (ECL), Low-Power mode, VDD = 1.8V | 265 | |
| Supply current IDD, FOSC = 32 kHz External Clock ECL Low-Power | IDD | 4.3 | 8.3 | µA | FOSC = 32 kHz, External Clock (ECL), Low-Power mode, VDD = 3.0V | 265 | |
| Supply current IDD, FOSC = 500 kHz External Clock ECL Low-Power | IDD | 18 | 25 | µA | FOSC = 500 kHz, External Clock (ECL), Low-Power mode, VDD = 1.8V | 265 | |
| Supply current IDD, FOSC = 500 kHz External Clock ECL Low-Power | IDD | 30 | 38 | µA | FOSC = 500 kHz, External Clock (ECL), Low-Power mode, VDD = 3.0V | 265 | |
| Base power-down current IPD, max at +85°C | IPD | 0.02 | 0.6 | µA | WDT, BOR and FVR disabled, all peripherals inactive, VREGPM = 1, VDD = 1.8V; max at +85°C | 266 | |
| Base power-down current IPD, max at +85°C | IPD | 0.025 | 0.8 | µA | WDT, BOR and FVR disabled, all peripherals inactive, VREGPM = 1, VDD = 3.0V; max at +85°C | 266 | |
| LPBOR current | 0.2 | 2 | µA | VDD = 3.0V; max at +85°C | 266 | ||
| Input leakage current, I/O ports | IIL | -125 | 5 | 125 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, +85°C | 268 |
| Input leakage current, MCLR | IIL | -200 | 50 | 200 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, +85°C | 268 |
| Weak pull-up current | IPUR | 25 | 100 | 200 | µA | VDD = 3.3V, VPIN = VSS | 268 |
| Output low voltage, I/O ports | VOL | 0.6 | V | IOL = 6 mA, VDD = 3.3V; IOL = 1.8 mA, VDD = 1.8V | 268 | ||
| Capacitive loading on all I/O pins | CIO | 50 | pF | All I/O pins | 268 | ||
| Input low voltage, I/O ports with SMbus levels | VIL | 0.8 | V | 2.7V ≤ VDD ≤ 5.5V | 268 | ||
| Input high voltage, I/O ports with SMbus levels | VIH | 2.1 | V | 2.7V ≤ VDD ≤ 5.5V | 268 | ||
| Voltage on VPP/MCLR during programming | VIHH | 8 | 9 | V | (Note 2) | 269 | |
| Brown-out Reset voltage, BORV = 0 | VBOR | 2.55 | 2.7 | 2.85 | V | BORV = 0 | 276 |
| Brown-out Reset voltage, BORV = 1 (PIC12LF1571/2) | VBOR | 1.8 | 1.9 | 2.05 | V | BORV = 1 (PIC12LF1571/2) | 276 |
| Low-Power Brown-out Reset voltage | VLPBOR | 1.8 | 2.1 | 2.5 | V | LPBOR = 1 | 276 |
| Internal calibrated HFINTOSC frequency tolerance | HFOSC | -2 | 2 | % | VDD = 3.0V, TA = 25°C (Note 2) | 273 | |
| External CLKIN frequency, External Clock (ECH) | FOSC | 20 | MHz | External Clock (ECH) | 272 |
CAD (KiCad official)
- Symbol:
PIC12LF1571-I - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
pic12lf1571-i-etched.step/pic12lf1571-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic12lf1571-i.step/pic12lf1571-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (334 pp, sha256
c28be7d052c3bf4f, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).