main
Ray
Publish 0.1.0
d06f3cf
PIC12LF1552T-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · MSOP-8
PIC12LF1552T-I from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply pin; the device operating voltage range is 1.8V to 3.6V. |
| 2 | RA5 | bidirectional | General purpose I/O with alternate functions AN4 analog input, CLKIN external clock input in EC mode, and ADGRDB guard ring output B. |
| 3 | RA4 | bidirectional | General purpose I/O with alternate functions AN3 analog input, SDO (alternate location via APFCON), CLKOUT FOSC/4 output, and ADGRDA guard ring output A. |
| 4 | RA3 | input | General purpose input only; alternate functions are MCLR master clear with internal pull-up and VPP programming voltage. |
| 5 | RA2 | bidirectional | General purpose I/O with alternate functions AN2 analog input, ADOUT ADC/CVD output, T0CKI Timer0 clock input, SDI, SDA I2C data, and INT external interrupt. |
| 6 | RA1 | bidirectional | General purpose I/O with alternate functions AN1 analog input, VREF+ ADC positive voltage reference input, SCK SPI clock, SCL I2C clock (open-drain), and ICSPCLK programming clock. |
| 7 | RA0 | bidirectional | General purpose I/O with alternate functions AN0 analog input, SDO (alternate location via APFCON), SS slave select input, and ICSPDAT ICSP data I/O. |
| 8 | VSS | power_in | Ground reference pin for the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 1.8 | 3.6 | V | FOSC 16 MHz | 203 | |
| Supply Voltage | VDD | 2.5 | 3.6 | V | FOSC 32 MHz | 203 | |
| RAM Data Retention Voltage | VDR | 1.5 | V | Device in Sleep mode | 203 | ||
| VDD Rise Rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | See Section 6.1 Power-on Reset (POR) | 203 | ||
| Fixed Voltage Reference Voltage for ADC, Initial Accuracy 1.024V | VADFVR | -7 | 6 | % | 1.024V, VDD ≥ 2.5V, 85°C (Note 2) | 203 | |
| Fixed Voltage Reference Voltage for ADC, Initial Accuracy 1.024V | VADFVR | -8 | 6 | % | 1.024V, VDD ≥ 2.5V, 125°C (Note 2) | 203 | |
| Fixed Voltage Reference Voltage for ADC, Initial Accuracy 2.048V | VADFVR | -7 | 6 | % | 2.048V, VDD ≥ 2.5V, 85°C | 203 | |
| Fixed Voltage Reference Voltage for ADC, Initial Accuracy 2.048V | VADFVR | -8 | 6 | % | 2.048V, VDD ≥ 2.5V, 125°C | 203 | |
| Temperature Coefficient, Fixed Voltage Reference | TCVFVR | -130 | ppm/°C | 203 | |||
| Supply Current (IDD) LFINTOSC mode | IDD | 2.5 | 18 | µA | VDD 1.8V, FOSC = 31 kHz | 205 | |
| Supply Current (IDD) LFINTOSC mode | IDD | 4 | 20 | µA | VDD 3.0V, FOSC = 31 kHz, LFINTOSC mode | 205 | |
| Supply Current (IDD) HFINTOSC mode | IDD | 0.35 | 0.7 | mA | VDD 1.8V, FOSC = 8 MHz | 205 | |
| Supply Current (IDD) HFINTOSC mode | IDD | 0.5 | 1.1 | mA | VDD 3.0V, FOSC = 8 MHz, HFINTOSC mode | 205 | |
| Supply Current (IDD) HFINTOSC mode | IDD | 0.5 | 1.2 | mA | VDD 1.8V, FOSC = 16 MHz | 205 | |
| Supply Current (IDD) HFINTOSC mode | IDD | 0.75 | 1.75 | mA | VDD 3.0V, FOSC = 16 MHz, HFINTOSC mode | 205 | |
| Supply Current (IDD) HFINTOSC mode with PLL | IDD | 1.4 | 3.5 | mA | VDD 3.0V, FOSC = 32 MHz | 205 | |
| Power-down Base Current (IPD) | IPD | 0.02 | 1 | µA | VDD 1.8V, +85°C, WDT, BOR, FVR, and T1OSC disabled, all Peripherals Inactive | 206 | |
| Power-down Base Current (IPD) | IPD | 0.02 | 8 | µA | VDD 1.8V, +125°C, WDT, BOR, FVR, and T1OSC disabled, all Peripherals Inactive | 206 | |
| Power-down Base Current (IPD) | IPD | 0.03 | 2 | µA | VDD 3.0V, +85°C, WDT, BOR, FVR, and T1OSC disabled, all Peripherals Inactive | 206 | |
| Power-down Base Current (IPD) | IPD | 0.03 | 9 | µA | VDD 3.0V, +125°C, WDT, BOR, FVR, and T1OSC disabled, all Peripherals Inactive | 206 | |
| Input Low Voltage I/O port with TTL buffer | VIL | 0.15 | V | 1.8V ≤ VDD ≤ 3.6V; value given as 0.15 VDD | 207 | ||
| Input Low Voltage I/O port with Schmitt Trigger buffer | VIL | 0.2 | V | 2.0V ≤ VDD ≤ 3.6V; value given as 0.2 VDD | 207 | ||
| Input Low Voltage MCLR | VIL | 0.2 | V | MCLR; value given as 0.2 VDD | 207 | ||
| Input High Voltage I/O ports with TTL buffer | VIH | 0.25 | V | 1.8V ≤ VDD ≤ 3.6V; value given as 0.25 VDD + 0.8 | 207 | ||
| Input High Voltage I/O ports with Schmitt Trigger buffer | VIH | 0.8 | V | 2.0V ≤ VDD ≤ 3.6V; value given as 0.8 VDD | 207 | ||
| Input High Voltage MCLR | VIH | 0.8 | V | MCLR; value given as 0.8 VDD | 207 | ||
| Input Leakage Current I/O ports | IIL | -5 | 5 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance at 85°C | 207 | |
| Input Leakage Current I/O ports | IIL | -125 | 125 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance at 125°C | 207 | |
| Input Leakage Current MCLR | IIL | -50 | 50 | nA | VSS ≤ VPIN ≤ VDD at 85°C | 207 | |
| Weak Pull-up Current | IPUR | 25 | 100 | 200 | µA | VDD = 3.3V, VPIN = VSS | 207 |
| Output Low Voltage I/O ports | VOL | 0.6 | V | IOL = 6mA, VDD = 3.3V; IOL = 1.8mA, VDD = 1.8V | 207 | ||
| Capacitive Loading All I/O pins | CIO | 50 | pF | 207 | |||
| Power-on Reset Rearm Voltage | VPORR | 0.8 | V | 203 | |||
| Power-on Reset Release Voltage | VPOR | 1.6 | V | 203 | |||
| Ambient temperature under bias | TA | -40 | 125 | °C | 202 | ||
| Storage temperature | TSTG | -65 | 150 | °C | 202 | ||
| Voltage on VDD with respect to VSS | VDD | -0.3 | 4 | V | 202 | ||
| Voltage on MCLR with respect to VSS | VMCLR | -0.3 | 9 | V | 202 | ||
| Maximum current out of VSS pin | IVSS | 210 | mA | -40°C ≤ TA ≤ +85°C for industrial | 202 | ||
| Maximum current out of VSS pin | IVSS | 95 | mA | -40°C ≤ TA ≤ +125°C for extended | 202 | ||
| Maximum current into VDD pin | IDD | 150 | mA | -40°C ≤ TA ≤ +85°C for industrial | 202 | ||
| Maximum current into VDD pin | IDD | 70 | mA | -40°C ≤ TA ≤ +125°C for extended | 202 | ||
| Clamp current | IK | 20 | mA | VPIN < 0 or VPIN > VDD | 202 | ||
| Maximum output current sunk by any I/O pin | IOL | 25 | mA | 202 | |||
| Maximum output current sourced by any I/O pin | IOH | 25 | mA | 202 | |||
| Thermal Resistance Junction to Ambient 8-pin MSOP package | θJA | 211 | °C/W | 8-pin MSOP package | 209 | ||
| Thermal Resistance Junction to Case 8-pin MSOP package | θJC | 39 | °C/W | 8-pin MSOP package | 209 | ||
| Maximum Junction Temperature | TJMAX | 150 | °C | 209 | |||
| External CLKIN Frequency EC Oscillator mode (high) | FOSC | 20 | MHz | EC Oscillator mode (high) | 212 | ||
| Internal Calibrated HFINTOSC Frequency | HFOSC | 16 | MHz | 0°C ≤ TA ≤ +85°C | 212 | ||
| Frequency Tolerance | HFTOL | -3 | 3 | % | 25°C, 16MHz | 212 | |
| Frequency Tolerance | HFTOL | -6 | 6 | % | 0°C ≤ TA ≤ +85°C, 16 MHz | 212 | |
| Internal LFINTOSC Frequency | LFOSC | 31 | kHz | -40°C ≤ TA ≤ +125°C | 212 | ||
| MCLR Pulse Width (low) | TMCL | 2 | µs | -40°C to +85°C | 215 | ||
| MCLR Pulse Width (low) | TMCL | 5 | µs | +85°C to +125°C | 215 | ||
| Low-Power Watchdog Timer Time-out Period | TWDTLP | 10 | 16 | 27 | ms | VDD = 3.3V-3.6V, 1:512 Prescaler used | 215 |
| Power-up Timer Period, PWRTE = 0 | TPWRT | 40 | 65 | 140 | ms | PWRTE = 0 | 215 |
| Brown-out Reset Voltage | VBOR | 2.55 | 2.7 | 2.85 | V | BORV = 0 | 215 |
| Brown-out Reset Voltage | VBOR | 1.8 | 1.9 | 2.05 | V | BORV = 1 | 215 |
| Brown-out Reset Hysteresis | VHYST | 0 | 25 | 50 | mV | -40°C to +85°C | 215 |
| ADC Resolution | NR | 10 | bit | 216 | |||
| ADC Integral Error | EIL | -1 | 0.4 | 1 | LSb | -40°C to +85°C, VREF ≥ 2.0V | 216 |
| ADC Differential Error | EDL | -1 | 0.3 | 1 | LSb | -40°C to +85°C, VREF ≥ 2.0V | 216 |
| ADC Reference Voltage Range (VREFH, VREFL) | VREF | 1.8 | V | Absolute Minimum (Note 4) | 216 | ||
| ADC Reference Voltage Range (VREFH, VREFL) | VREF | 2 | V | Minimum for 1LSb Accuracy | 216 | ||
| Recommended Impedance of Analog Voltage Source | ZAIN | 3 | kΩ | Can go higher if external 0.01µF capacitor is present on input pin | 216 | ||
| ADC Clock Period | TAD | 0.25 | 25 | µs | TOSC-based, -40°C to +85°C, VREF ≥ 2.4V | 217 | |
| ADC Clock Period | TAD | 1 | 1.6 | 6 | µs | ADC Internal FRC Oscillator Period, ADCS<1:0> = 11 (ADFRC mode) | 217 |
| Self-timed Write Cycle Time | TIW | 2 | 2.5 | ms | 208 |
CAD (KiCad official)
- Symbol:
PIC12LF1552T-I - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
pic12lf1552t-i-etched.step/pic12lf1552t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic12lf1552t-i.step/pic12lf1552t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (243 pp, sha256
543a9b665abc8389, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PIC12LF1552T-I
**Microchip Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · MSOP-8
PIC12LF1552T-I from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply pin; the device operating voltage range is 1.8V to 3.6V. |
| 2 | RA5 | bidirectional | General purpose I/O with alternate functions AN4 analog input, CLKIN external clock input in EC mode, and ADGRDB guard ring output B. |
| 3 | RA4 | bidirectional | General purpose I/O with alternate functions AN3 analog input, SDO (alternate location via APFCON), CLKOUT FOSC/4 output, and ADGRDA guard ring output A. |
| 4 | RA3 | input | General purpose input only; alternate functions are MCLR master clear with internal pull-up and VPP programming voltage. |
| 5 | RA2 | bidirectional | General purpose I/O with alternate functions AN2 analog input, ADOUT ADC/CVD output, T0CKI Timer0 clock input, SDI, SDA I2C data, and INT external interrupt. |
| 6 | RA1 | bidirectional | General purpose I/O with alternate functions AN1 analog input, VREF+ ADC positive voltage reference input, SCK SPI clock, SCL I2C clock (open-drain), and ICSPCLK programming clock. |
| 7 | RA0 | bidirectional | General purpose I/O with alternate functions AN0 analog input, SDO (alternate location via APFCON), SS slave select input, and ICSPDAT ICSP data I/O. |
| 8 | VSS | power_in | Ground reference pin for the device. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 1.8 | | 3.6 | V | FOSC 16 MHz | 203 |
| Supply Voltage | VDD | 2.5 | | 3.6 | V | FOSC 32 MHz | 203 |
| RAM Data Retention Voltage | VDR | 1.5 | | | V | Device in Sleep mode | 203 |
| VDD Rise Rate to ensure internal Power-on Reset signal | SVDD | 0.05 | | | V/ms | See Section 6.1 Power-on Reset (POR) | 203 |
| Fixed Voltage Reference Voltage for ADC, Initial Accuracy 1.024V | VADFVR | -7 | | 6 | % | 1.024V, VDD ≥ 2.5V, 85°C (Note 2) | 203 |
| Fixed Voltage Reference Voltage for ADC, Initial Accuracy 1.024V | VADFVR | -8 | | 6 | % | 1.024V, VDD ≥ 2.5V, 125°C (Note 2) | 203 |
| Fixed Voltage Reference Voltage for ADC, Initial Accuracy 2.048V | VADFVR | -7 | | 6 | % | 2.048V, VDD ≥ 2.5V, 85°C | 203 |
| Fixed Voltage Reference Voltage for ADC, Initial Accuracy 2.048V | VADFVR | -8 | | 6 | % | 2.048V, VDD ≥ 2.5V, 125°C | 203 |
| Temperature Coefficient, Fixed Voltage Reference | TCVFVR | | -130 | | ppm/°C | | 203 |
| Supply Current (IDD) LFINTOSC mode | IDD | | 2.5 | 18 | µA | VDD 1.8V, FOSC = 31 kHz | 205 |
| Supply Current (IDD) LFINTOSC mode | IDD | | 4 | 20 | µA | VDD 3.0V, FOSC = 31 kHz, LFINTOSC mode | 205 |
| Supply Current (IDD) HFINTOSC mode | IDD | | 0.35 | 0.7 | mA | VDD 1.8V, FOSC = 8 MHz | 205 |
| Supply Current (IDD) HFINTOSC mode | IDD | | 0.5 | 1.1 | mA | VDD 3.0V, FOSC = 8 MHz, HFINTOSC mode | 205 |
| Supply Current (IDD) HFINTOSC mode | IDD | | 0.5 | 1.2 | mA | VDD 1.8V, FOSC = 16 MHz | 205 |
| Supply Current (IDD) HFINTOSC mode | IDD | | 0.75 | 1.75 | mA | VDD 3.0V, FOSC = 16 MHz, HFINTOSC mode | 205 |
| Supply Current (IDD) HFINTOSC mode with PLL | IDD | | 1.4 | 3.5 | mA | VDD 3.0V, FOSC = 32 MHz | 205 |
| Power-down Base Current (IPD) | IPD | | 0.02 | 1 | µA | VDD 1.8V, +85°C, WDT, BOR, FVR, and T1OSC disabled, all Peripherals Inactive | 206 |
| Power-down Base Current (IPD) | IPD | | 0.02 | 8 | µA | VDD 1.8V, +125°C, WDT, BOR, FVR, and T1OSC disabled, all Peripherals Inactive | 206 |
| Power-down Base Current (IPD) | IPD | | 0.03 | 2 | µA | VDD 3.0V, +85°C, WDT, BOR, FVR, and T1OSC disabled, all Peripherals Inactive | 206 |
| Power-down Base Current (IPD) | IPD | | 0.03 | 9 | µA | VDD 3.0V, +125°C, WDT, BOR, FVR, and T1OSC disabled, all Peripherals Inactive | 206 |
| Input Low Voltage I/O port with TTL buffer | VIL | | | 0.15 | V | 1.8V ≤ VDD ≤ 3.6V; value given as 0.15 VDD | 207 |
| Input Low Voltage I/O port with Schmitt Trigger buffer | VIL | | | 0.2 | V | 2.0V ≤ VDD ≤ 3.6V; value given as 0.2 VDD | 207 |
| Input Low Voltage MCLR | VIL | | | 0.2 | V | MCLR; value given as 0.2 VDD | 207 |
| Input High Voltage I/O ports with TTL buffer | VIH | 0.25 | | | V | 1.8V ≤ VDD ≤ 3.6V; value given as 0.25 VDD + 0.8 | 207 |
| Input High Voltage I/O ports with Schmitt Trigger buffer | VIH | 0.8 | | | V | 2.0V ≤ VDD ≤ 3.6V; value given as 0.8 VDD | 207 |
| Input High Voltage MCLR | VIH | 0.8 | | | V | MCLR; value given as 0.8 VDD | 207 |
| Input Leakage Current I/O ports | IIL | -5 | | 5 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance at 85°C | 207 |
| Input Leakage Current I/O ports | IIL | -125 | | 125 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance at 125°C | 207 |
| Input Leakage Current MCLR | IIL | -50 | | 50 | nA | VSS ≤ VPIN ≤ VDD at 85°C | 207 |
| Weak Pull-up Current | IPUR | 25 | 100 | 200 | µA | VDD = 3.3V, VPIN = VSS | 207 |
| Output Low Voltage I/O ports | VOL | | | 0.6 | V | IOL = 6mA, VDD = 3.3V; IOL = 1.8mA, VDD = 1.8V | 207 |
| Capacitive Loading All I/O pins | CIO | | | 50 | pF | | 207 |
| Power-on Reset Rearm Voltage | VPORR | | 0.8 | | V | | 203 |
| Power-on Reset Release Voltage | VPOR | | 1.6 | | V | | 203 |
| Ambient temperature under bias | TA | -40 | | 125 | °C | | 202 |
| Storage temperature | TSTG | -65 | | 150 | °C | | 202 |
| Voltage on VDD with respect to VSS | VDD | -0.3 | | 4 | V | | 202 |
| Voltage on MCLR with respect to VSS | VMCLR | -0.3 | | 9 | V | | 202 |
| Maximum current out of VSS pin | IVSS | | | 210 | mA | -40°C ≤ TA ≤ +85°C for industrial | 202 |
| Maximum current out of VSS pin | IVSS | | | 95 | mA | -40°C ≤ TA ≤ +125°C for extended | 202 |
| Maximum current into VDD pin | IDD | | | 150 | mA | -40°C ≤ TA ≤ +85°C for industrial | 202 |
| Maximum current into VDD pin | IDD | | | 70 | mA | -40°C ≤ TA ≤ +125°C for extended | 202 |
| Clamp current | IK | | | 20 | mA | VPIN < 0 or VPIN > VDD | 202 |
| Maximum output current sunk by any I/O pin | IOL | | | 25 | mA | | 202 |
| Maximum output current sourced by any I/O pin | IOH | | | 25 | mA | | 202 |
| Thermal Resistance Junction to Ambient 8-pin MSOP package | θJA | | 211 | | °C/W | 8-pin MSOP package | 209 |
| Thermal Resistance Junction to Case 8-pin MSOP package | θJC | | 39 | | °C/W | 8-pin MSOP package | 209 |
| Maximum Junction Temperature | TJMAX | | | 150 | °C | | 209 |
| External CLKIN Frequency EC Oscillator mode (high) | FOSC | | | 20 | MHz | EC Oscillator mode (high) | 212 |
| Internal Calibrated HFINTOSC Frequency | HFOSC | | 16 | | MHz | 0°C ≤ TA ≤ +85°C | 212 |
| Frequency Tolerance | HFTOL | -3 | | 3 | % | 25°C, 16MHz | 212 |
| Frequency Tolerance | HFTOL | -6 | | 6 | % | 0°C ≤ TA ≤ +85°C, 16 MHz | 212 |
| Internal LFINTOSC Frequency | LFOSC | | 31 | | kHz | -40°C ≤ TA ≤ +125°C | 212 |
| MCLR Pulse Width (low) | TMCL | 2 | | | µs | -40°C to +85°C | 215 |
| MCLR Pulse Width (low) | TMCL | 5 | | | µs | +85°C to +125°C | 215 |
| Low-Power Watchdog Timer Time-out Period | TWDTLP | 10 | 16 | 27 | ms | VDD = 3.3V-3.6V, 1:512 Prescaler used | 215 |
| Power-up Timer Period, PWRTE = 0 | TPWRT | 40 | 65 | 140 | ms | PWRTE = 0 | 215 |
| Brown-out Reset Voltage | VBOR | 2.55 | 2.7 | 2.85 | V | BORV = 0 | 215 |
| Brown-out Reset Voltage | VBOR | 1.8 | 1.9 | 2.05 | V | BORV = 1 | 215 |
| Brown-out Reset Hysteresis | VHYST | 0 | 25 | 50 | mV | -40°C to +85°C | 215 |
| ADC Resolution | NR | | | 10 | bit | | 216 |
| ADC Integral Error | EIL | -1 | 0.4 | 1 | LSb | -40°C to +85°C, VREF ≥ 2.0V | 216 |
| ADC Differential Error | EDL | -1 | 0.3 | 1 | LSb | -40°C to +85°C, VREF ≥ 2.0V | 216 |
| ADC Reference Voltage Range (VREFH, VREFL) | VREF | 1.8 | | | V | Absolute Minimum (Note 4) | 216 |
| ADC Reference Voltage Range (VREFH, VREFL) | VREF | 2 | | | V | Minimum for 1LSb Accuracy | 216 |
| Recommended Impedance of Analog Voltage Source | ZAIN | | | 3 | kΩ | Can go higher if external 0.01µF capacitor is present on input pin | 216 |
| ADC Clock Period | TAD | 0.25 | | 25 | µs | TOSC-based, -40°C to +85°C, VREF ≥ 2.4V | 217 |
| ADC Clock Period | TAD | 1 | 1.6 | 6 | µs | ADC Internal FRC Oscillator Period, ADCS<1:0> = 11 (ADFRC mode) | 217 |
| Self-timed Write Cycle Time | TIW | | 2 | 2.5 | ms | | 208 |
## CAD (KiCad official)
- Symbol: `PIC12LF1552T-I`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `pic12lf1552t-i-etched.step` / `pic12lf1552t-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic12lf1552t-i.step` / `pic12lf1552t-i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/pic12lf1552t-i-datasheet.pdf) (243 pp, sha256 `543a9b665abc8389`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic12lf1552t-i-datasheet.pdf)