Generated by kicad-footprint-generator · KiCad file format 20260206
PIC12HV752-E
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-8
PIC12HV752-E from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply; on the PIC12HV752 the shunt regulator operates from 2.0V to a user-defined voltage with 5-volt regulation and a 1 mA to 50 mA shunt range. |
| 2 | RA5 | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up; alternate functions are T1CKI, COG1OUT0 (CMOS), C2IN1-, and CLKIN (external clock input in EC mode). |
| 3 | RA4 | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up; alternate functions are T1G, COG1OUT1 (CMOS), COG1FLT, C1IN1-, AN3 and CLKOUT (FOSC/4 output). |
| 4 | RA3/MCLR/VPP | input | Input-only general purpose pin with interrupt-on-change; functions as MCLR (Master Clear with internal pull-up) when MCLRE is set, or as VPP programming voltage, and can also serve as T1G or COG1FLT. |
| 5 | RA2 | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up; high-power (HP) output driver with reduced slew rate control available, also used for INT, CCP1, C1OUT, C2OUT, T0CKI, COG1OUT0 and AN2. |
| 6 | RA1 | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up; also C1IN0-, C2IN0-, AN1, VREF+ (A/D positive reference input) and ICSPCLK (serial programming clock). |
| 7 | RA0 | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up; high-power (HP) output driver by default COG1OUT1, also C1IN0+, C2IN0+, AN0, DACOUT, REFOUT and ICSPDAT (serial programming data I/O). |
| 8 | VSS | power_in | Ground reference for the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 125 | °C | 150 | |||
| Storage temperature | -65 | 150 | °C | 150 | |||
| Voltage on VDD pin with respect to VSS (PIC12HV752) | VDD | -0.3 | 6.5 | V | 150 | ||
| Voltage on MCLR with respect to VSS | -0.3 | 13.5 | V | 150 | |||
| Voltage on all other pins with respect to VSS | -0.3 | V | max printed as VDD + 0.3V | 150 | |||
| Maximum current on VSS pin | 95 | mA | -40°C to +125°C | 150 | |||
| Maximum current on VDD pin | VDD | 95 | mA | -40°C to +125°C | 150 | ||
| Clamp current | IK | 20 | mA | VPIN < 0 or VPIN > VDD | 150 | ||
| Operating supply voltage VDDMIN | VDDMIN | 2 | V | Fosc ≤ 8 MHz | 151 | ||
| Operating supply voltage VDDMIN | VDDMIN | 3 | V | 8 MHz < Fosc ≤ 10 MHz | 151 | ||
| Operating supply voltage VDDMAX | VDDMAX | 5 | V | 10 MHz < Fosc ≤ 20 MHz | 151 | ||
| Operating ambient temperature TA_MIN | TA_MIN | -40 | °C | Extended temperature | 151 | ||
| Operating ambient temperature TA_MAX | TA_MAX | 125 | °C | Extended temperature | 151 | ||
| Supply voltage VDD (D001) | VDD | 2 | 5 | V | FOSC ≤ 8 MHz | 153 | |
| Supply voltage VDD (D001) | VDD | 3 | 5 | V | FOSC ≤ 10 MHz | 153 | |
| Supply voltage VDD (D001) | VDD | 4.5 | 5 | V | FOSC ≤ 20 MHz | 153 | |
| RAM data retention voltage (D002) | VDR | 1.5 | V | Device in Sleep mode | 153 | ||
| VDD rise rate to ensure internal Power-on Reset (D004) | SVDD | 0.05 | V/ms | See Table 17-1 for details. | 153 | ||
| Supply current, LFINTOSC/HFINTOSC 8 MHz (D014) | IDD | 460 | 650 | µA | FOSC = 8 MHz HFINTOSC mode, VDD = 2.0 V | 154 | |
| Supply current, HFINTOSC 8 MHz (D014) | IDD | 750 | 1100 | µA | FOSC = 8 MHz HFINTOSC mode, VDD = 3.0 V | 155 | |
| Supply current, HFINTOSC 8 MHz (D014) | IDD | 1.2 | 1.6 | mA | FOSC = 8 MHz HFINTOSC mode, VDD = 4.5 V | 155 | |
| Supply current, EC 20 MHz (D015) | IDD | 2.1 | 3 | mA | FOSC = 20 MHz EC Oscillator mode, VDD = 4.5 V | 155 | |
| Power-down base current, Sleep (D020) | IPD | 135 | 200 | µA | Sleep mode, VDD = 2.0 V | 156 | |
| Power-down base current, Sleep (D020) | IPD | 210 | 280 | µA | Sleep mode, VDD = 3.0 V | 156 | |
| Power-down base current, Sleep (D020) | IPD | 260 | 350 | µA | Sleep mode, VDD = 4.5 V | 156 | |
| Input low voltage, I/O port with TTL buffer (D030) | VIL | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 158 | ||
| Input high voltage, I/O port with TTL buffer (D040) | VIH | 2 | V | 4.5V ≤ VDD ≤ 5.5V | 158 | ||
| Input leakage current, I/O ports (D060) | IIL | 0.1 | 1 | µA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, 85°C | 158 | |
| Input leakage current, RA3/MCLR (D061) | IIL | 0.7 | 5 | µA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, 85°C | 158 | |
| Weak pull-up current (D070) | IPUR | 50 | 250 | 400 | µA | VDD = 5.0V, VPIN = VSS | 158 |
| Output low voltage, I/O ports RA1, RA4 and RA5 (D080) | VOL | 0.6 | V | IOL = 7 mA, VDD = 4.5V, -40°C to +125°C | 158 | ||
| Output low voltage, I/O ports RA0 and RA2 (D080) | VOL | 0.6 | V | IOL = 14 mA, VDD = 4.5V, -40°C to +125°C | 158 | ||
| Voltage on MCLR/VPP pin during programming (D110) | VIHH | 10 | 13 | V | Note 1: required only if single-supply programming is disabled | 159 | |
| Data retention, characteristic retention (D124) | TRETD | 40 | Year | Provided no other specifications are violated | 159 | ||
| Current on MCLR/VPP during erase/write (D114) | IPPPGM | 300 | 1000 | µA | 159 | ||
| External CLKIN frequency (OS01) | FOSC | 20 | MHz | EC Oscillator mode | 162 | ||
| External CLKIN period (OS02) | TOSC | 50 | ns | EC Oscillator mode | 162 | ||
| Internal calibrated INTOSC 4 MHz, 5% tolerance (OS07) | INTOSC | 3.8 | 4 | 4.2 | MHz | 2.0V ≤ VDD ≤ 5.5V, -40°C ≤ TA ≤ +125°C (Ext.) | 163 |
| Internal calibrated HFINTOSC 8 MHz, 5% tolerance (OS08) | HFOSC | 7.6 | 8 | 8.4 | MHz | 2.0V ≤ VDD ≤ 5.5V, -40°C ≤ TA ≤ +125°C (Ext.) | 163 |
| ADC integral error (AD02) | EIL | 1 | LSb | VREF = 3.0V | 170 | ||
| ADC offset error (AD04) | EOFF | 1.5 | 2 | LSb | VREF = 3.0V | 170 | |
| ADC gain error (AD05) | EGN | 1 | LSb | VREF = 3.0V | 170 | ||
| VREF input current during VAIN acquisition (AD09) | IREF | 10 | 1000 | µA | During VAIN acquisition | 170 | |
| VREF input current during A/D conversion cycle (AD09) | IREF | 50 | µA | During A/D conversion cycle | 170 | ||
| DAC settling time (DAC04) | CST | 10 | µs | DACR<4:0> transitions from 0000 to 1111 | 169 | ||
| Fixed voltage reference output (VR01) | VFVR | 1.116 | 1.2 | 1.284 | V | 169 | |
| Shunt voltage (SR01) | VSHUNT | 4.75 | 5 | 5.5 | V | 169 | |
| Shunt current (SR02) | ISHUNT | 1 | 50 | mA | 169 | ||
| Shunt regulator settling time (SR03) | TSETTLE | 150 | ns | To 1% of final value | 169 | ||
| Comparator input common mode voltage (CM02) | VICM | 0 | V | max printed as VDD, 1.5 V | 168 | ||
| Comparator hysteresis (CM06) | CHYSTER | 35 | 50 | mV | 168 | ||
| Brown-out Reset voltage (VBOR) | VBOR | 2 | 2.15 | 2.3 | V | 166 | |
| Brown-out Reset DC minimum detection period (TBOR) | TBOR | 100 | µs | VDD ≤ VBOR | 166 | ||
| Power-up Timer period, PWRTE = 0 (TPWRT) | TPWRT | 40 | 65 | 140 | ms | PWRTE = 0 (no prescaler) | 166 |
| Thermal resistance junction to ambient, 8-pin SOIC (TH01) | θJA | 149.5 | °C/W | 8-pin SOIC package | 160 | ||
| Thermal resistance junction to case, 8-pin SOIC (TH02) | θJC | 39.9 | °C/W | 8-pin SOIC package | 160 | ||
| Maximum junction temperature (TH03) | TJMAX | 150 | °C | 160 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | SN = 8-lead Small Outline (3.90 mm) (SOIC) MF = 8-lead Plastic Dual Flat, No Lead (3x3) (DFN) | 208 |
CAD (KiCad official)
- Symbol:
PIC12HV752-E - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
pic12hv752-e-etched.step/pic12hv752-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic12hv752-e.step/pic12hv752-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (210 pp, sha256
1d2912b92b958c32, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).