Generated by kicad-footprint-generator · KiCad file format 20260206
PIC12CE518-04
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-8
PIC12CE518-04 from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply for logic and I/O pins. |
| 2 | GP5/OSC1/CLKIN | bidirectional | Bidirectional I/O port, oscillator crystal input, or external clock source input (GPIO in Internal RC mode only, OSC1 in all other oscillator modes); TTL input when GPIO and ST input in external RC oscillator mode. |
| 3 | GP4/OSC2 | bidirectional | Bidirectional I/O port and oscillator crystal output, connecting to a crystal or resonator in XT and LP crystal oscillator modes only (GPIO in other modes). |
| 4 | GP3/MCLR/VPP | input | Input port, active-low master clear (reset) input, or programming voltage input; voltage on MCLR/VPP must not exceed VDD during normal operation or the device will enter programming mode. |
| 5 | GP2/T0CKI | bidirectional | Bidirectional I/O port that can be configured as the T0CKI timer0 clock input. |
| 6 | GP1 | bidirectional | Bidirectional I/O port and serial programming clock; software-programmable weak pull-up and wake-up from SLEEP on pin change, with Schmitt Trigger input in serial programming mode. |
| 7 | GP0 | bidirectional | Bidirectional I/O port and serial programming data; software-programmable weak pull-up and wake-up from SLEEP on pin change, with Schmitt Trigger input in serial programming mode. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 3 | 5.5 | V | FOSC = DC to 4 MHz (Commercial/Industrial, Extended) | 80 | |
| RAM Data Retention Voltage | VDR | 1.5 | V | Device in SLEEP mode | 80 | ||
| VDD Rise Rate to ensure Power-on Reset | SVDD | 0.05 | V/ms | See section on Power-on Reset for details | 80 | ||
| Supply Current, XT and EXTRC options | IDD | 0.8 | 1.4 | mA | XT and EXTRC options; FOSC = 4 MHz, VDD = 5.5V | 80 | |
| Supply Current, INTRC option | IDD | 0.8 | 1.4 | mA | INTRC Option; FOSC = 4 MHz, VDD = 5.5V | 80 | |
| Supply Current, LP option, Commercial Temperature | IDD | 19 | 27 | µA | LP OPTION, Commercial Temperature; FOSC = 32 kHz, VDD = 3.0V, WDT disabled | 80 | |
| Supply Current, LP option, Industrial Temperature | IDD | 19 | 35 | µA | LP OPTION, Industrial Temperature; FOSC = 32 kHz, VDD = 3.0V, WDT disabled | 80 | |
| Supply Current, LP option, Extended Temperature | IDD | 30 | 55 | µA | LP OPTION, Extended Temperature; FOSC = 32 kHz, VDD = 3.0V, WDT disabled | 80 | |
| Power-Down Current, Commercial | IPD | 0.25 | 4 | µA | VDD = 3.0V, Commercial, WDT disabled | 80 | |
| Power-Down Current, Industrial | IPD | 0.25 | 5 | µA | VDD = 3.0V, Industrial, WDT disabled | 80 | |
| Power-Down Current, Extended | IPD | 2 | 12 | µA | VDD = 3.0V, Extended, WDT disabled | 80 | |
| Power-Down Current with WDT enabled, Commercial | ∆IWDT | 2.2 | 5 | µA | VDD = 3.0V, Commercial | 80 | |
| Power-Down Current with WDT enabled, Industrial | ∆IWDT | 2.2 | 6 | µA | VDD = 3.0V, Industrial | 80 | |
| Power-Down Current with WDT enabled, Extended | ∆IWDT | 4 | 11 | µA | VDD = 3.0V, Extended | 80 | |
| Supply Current during read/write to EEPROM peripheral | ∆IEE | 0.1 | 0.2 | mA | FOSC = 4 MHz, Vdd = 5.5V, SCL = 400kHz | 80 | |
| Input Low Voltage, I/O ports with TTL buffer | VIL | 0.8 | V | For 4.5V ≤ VDD ≤ 5.5V | 82 | ||
| Input High Voltage, I/O ports with TTL buffer (otherwise) | VIH | 2 | V | otherwise | 82 | ||
| GPIO weak pull-up current | IPUR | 30 | 250 | 400 | µA | VDD = 5V, VPIN = VSS | 82 |
| MCLR pull-up current | 30 | µA | VDD = 5V, VPIN = VSS | 82 | |||
| Input leakage current, I/O ports | IIL | 1 | µA | Vss ≤ VPIN ≤ VDD, Pin at hi-impedance | 82 | ||
| Input leakage current, T0CKI | 5 | µA | Vss ≤ VPIN ≤ VDD | 82 | |||
| Input leakage current, OSC1 | 5 | µA | Vss ≤ VPIN ≤ VDD, XT and LP osc configuration | 82 | |||
| Output Low Voltage, I/O ports (-40°C to +85°C) | VOL | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40°C to +85°C | 82 | ||
| Output Low Voltage, I/O ports (-40°C to +125°C) | VOL | 0.6 | V | IOL = 7.0 mA, VDD = 4.5V, -40°C to +125°C | 82 | ||
| Capacitance, OSC2 pin | COSC2 | 15 | pF | In XT and LP modes when external clock is used to drive OSC1. | 82 | ||
| Capacitance, All I/O pins | CIO | 50 | pF | 82 | |||
| GP0/GP1 pull-up resistor | 38 | 42 | 63 | KΩ | VDD 2.5 V; Temperature -40 °C | 84 | |
| GP0/GP1 pull-up resistor | 42 | 48 | 63 | KΩ | VDD 2.5 V; Temperature 25 °C | 84 | |
| GP0/GP1 pull-up resistor | 42 | 49 | 63 | KΩ | VDD 2.5 V; Temperature 85 °C | 84 | |
| GP0/GP1 pull-up resistor | 50 | 55 | 63 | KΩ | VDD 2.5 V; Temperature 125 °C | 84 | |
| GP0/GP1 pull-up resistor | 15 | 17 | 20 | KΩ | VDD 5.5 V; Temperature -40 °C | 84 | |
| GP0/GP1 pull-up resistor | 18 | 20 | 23 | KΩ | VDD 5.5 V; Temperature 25 °C | 84 | |
| GP0/GP1 pull-up resistor | 19 | 22 | 25 | KΩ | VDD 5.5 V; Temperature 85 °C | 84 | |
| GP0/GP1 pull-up resistor | 22 | 24 | 28 | KΩ | VDD 5.5 V; Temperature 125 °C | 84 | |
| GP3 pull-up resistor | 285 | 346 | 417 | KΩ | VDD 2.5 V; Temperature -40 °C | 84 | |
| GP3 pull-up resistor | 343 | 414 | 532 | KΩ | VDD 2.5 V; Temperature 25 °C | 84 | |
| GP3 pull-up resistor | 368 | 457 | 532 | KΩ | VDD 2.5 V; Temperature 85 °C | 84 | |
| GP3 pull-up resistor | 431 | 504 | 593 | KΩ | VDD 2.5 V; Temperature 125 °C | 84 | |
| GP3 pull-up resistor | 247 | 292 | 360 | KΩ | VDD 5.5 V; Temperature -40 °C | 84 | |
| GP3 pull-up resistor | 288 | 341 | 437 | KΩ | VDD 5.5 V; Temperature 25 °C | 84 | |
| GP3 pull-up resistor | 306 | 371 | 448 | KΩ | VDD 5.5 V; Temperature 85 °C | 84 | |
| GP3 pull-up resistor | 351 | 407 | 500 | KΩ | VDD 5.5 V; Temperature 125 °C | 84 | |
| Internal calibrated RC frequency | 3.65 | 4 | 4.28 | MHz | VDD = 5.0V | 87 | |
| Internal calibrated RC frequency | 3.55 | 4.31 | MHz | VDD = 2.5V | 87 | ||
| Watchdog Timer Time-out Period (No Prescaler) | Twdt | 9 | 18 | 30 | ms | VDD = 5 V (Commercial) | 89 |
| Device Reset Timer Period | TDRT | 9 | 18 | 30 | ms | VDD = 5 V (Commercial) | 89 |
| Ambient temperature under bias | -40 | 125 | °C | 79 | |||
| Storage temperature | -65 | 150 | °C | 79 | |||
| Voltage on VDD with respect to VSS | VDD | 0 | 7 | V | 79 | ||
| Voltage on MCLR with respect to VSS | 0 | 14 | V | 79 | |||
| Voltage on all other pins with respect to VSS | -0.3 | V | Upper limit printed as (VDD + 0.3 V) | 79 | |||
| Max. Current into VDD pin | 150 | mA | 79 | ||||
| Input Clamp Current | IIK | -20 | 20 | mA | VI < 0 or VI > VDD | 79 | |
| Output Clamp Current | IOK | -20 | 20 | mA | VO < 0 or VO > VDD | 79 | |
| Max. Output Current sunk by any I/O pin | 25 | mA | 79 | ||||
| Max. Output Current sourced by any I/O pin | 25 | mA | 79 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Package Type: K04-057 8-Lead Plastic Small Outline (SN), Narrow, 150 mil Dimension Limits MIN | 101 |
CAD (KiCad official)
- Symbol:
PIC12CE518-04 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
pic12ce518-04-etched.step/pic12ce518-04-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic12ce518-04.step/pic12ce518-04.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (113 pp, sha256
038ccfcc9e0e8996, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).