main
History Download
Ray Publish 0.1.0 d03cf99

PIC12C671-04I

Microchip Tech · Pre-ordered MCUs · PDIP-8

PIC12C671-04I from Microchip Tech, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Positive supply for logic and I/O pins.
2 GP5/OSC1/CLKIN bidirectional Bi-directional I/O port, oscillator crystal input, or external clock source input; GPIO in INTRC mode only, OSC1 in all other oscillator modes, with Schmitt trigger input for EXTRC oscillator mode.
3 GP4/OSC2/AN3/CLKOUT bidirectional Bi-directional I/O port, oscillator crystal output (HS, XT and LP modes only), or analog input 3; in EXTRC and INTRC modes the pin can be configured as CLKOUT, which has 1/4 the frequency of OSC1.
4 GP3/MCLR/VPP input Input port, active-low master clear (reset) input when configured as MCLR, or programming voltage input; voltage on MCLR/VPP must not exceed VDD during normal device operation, and the weak pull-up is always on when configured as MCLR.
5 GP2/T0CKI/AN2/INT bidirectional Bi-directional I/O port and analog input 2 that can be configured as the T0CKI timer input or the external interrupt INT.
6 GP1/AN1/VREF bidirectional Bi-directional I/O port, serial programming clock, analog input 1 or voltage reference, with optional software-programmed weak pull-up and interrupt-on-pin change; Schmitt Trigger input in serial programming mode.
7 GP0/AN0 bidirectional Bi-directional I/O port, serial programming data or analog input 0, with optional software-programmed weak pull-up and interrupt-on-pin change; Schmitt Trigger input in serial programming mode.
8 VSS power_in Ground reference for logic and I/O pins.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package PDIP-8
Category Single Chip Microcomputer/Microcontroller
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient temperature under bias -40 125 °C 89
Storage temperature -65 150 °C 89
Voltage on any pin with respect to VSS (except VDD and MCLR) -0.3 V 89
Voltage on VDD with respect to VSS VDD 0 7 V 89
Voltage on MCLR with respect to VSS 0 14 V 89
Maximum current into VDD pin 150 mA 89
Input clamp current IIK 20 mA VI < 0 or VI > VDD 89
Output clamp current IOK 20 mA VO < 0 or VO > VDD 89
Maximum output current sunk by any I/O pin 25 mA 89
Maximum output current sourced by any I/O pin 25 mA 89
Supply Voltage VDD 3 5.5 V 92
Operating temperature range TA -40 85 °C industrial 92
RAM Data Retention Voltage VDR 1.5 V Device in SLEEP mode 92
VDD Rise Rate to ensure Power-on Reset SVDD 0.05 V/ms See section on Power-on Reset for details 92
Supply Current IDD 1.2 2.5 mA FOSC = 4MHz, VDD = 3.0V, XT and EXTRC mode (Note 4) 92
Supply Current IDD 19 37 µA FOSC = 32kHz, VDD = 3.0V, WDT disabled, LP mode, Industrial Temperature 92
Power-down Current IPD 0.25 0.8 µA VDD = 3.0V, Industrial, WDT disabled 92
Power-down Current IPD 7 9 µA VDD = 5.5V, Industrial, WDT disabled 92
Watchdog Timer Current IWDT 2.2 6 µA VDD = 3.0V, Industrial 92
Input Low Voltage, I/O ports with TTL buffer VIL 0.8 V For 4.5V ≤ VDD ≤ 5.5V 95
Input High Voltage, I/O ports with TTL buffer VIH 2 V 4.5V ≤ VDD ≤ 5.5V 95
Input leakage current, I/O ports IIL 1 µA VSS ≤ VPIN ≤ VDD, pin at hi-impedance 95
Input leakage current, GP3/MCLR 30 µA VSS ≤ VPIN ≤ VDD 95
Input leakage current, GP3 5 µA Note 6: GP3 input with pull-up disabled; VSS ≤ VPIN ≤ VDD 95
Input leakage current, GP2/T0CKI 5 µA VSS ≤ VPIN ≤ VDD 95
Input leakage current, OSC1 5 µA VSS ≤ VPIN ≤ VDD, XT, HS, and LP osc configuration 95
GPIO weak pull-up current IPUR 50 250 400 µA VDD = 5V, VPIN = VSS 95
MCLR pull-up current 30 µA VDD = 5V, VPIN = VSS 95
Output Low Voltage, I/O ports VOL 0.6 V IOL = 8.5 mA, VDD = 4.5V, -40C to +85C 95
Output Low Voltage, OSC2/CLKOUT VOL 0.6 V IOL = 1.6 mA, VDD = 4.5V, -40C to +85C 95
Capacitive loading, OSC2 pin COSC2 15 pF In XT and LP modes when external clock is used to drive OSC1 96
Capacitive loading, all I/O pins CIO 50 pF 96
Oscillator Frequency (XT) FOSC 0.455 4 MHz XT osc mode 100
Oscillator Frequency (EXTRC) FOSC 4 MHz EXTRC osc mode 100
Internal Calibrated RC Frequency 3.65 4 4.28 MHz VDD = 5.0V 101
OSC1 to CLKOUT TosH2ckL 75 200 ns EXTRC and INTRC modes (Note 1) 102
CLKOUT rise time TckR 35 100 ns EXTRC and INTRC modes (Note 1) 102
CLKOUT fall time TckF 35 100 ns EXTRC and INTRC modes (Note 1) 102
OSC1 (Q1 cycle) to Port out valid TosH2ioV 50 150 ns 102
OSC1 (Q2 cycle) to Port input invalid (I/O in hold time) TosH2ioI 100 ns PIC12C67X 102
Port output rise time TioR 10 40 ns PIC12C67X 102
Port output fall time TioF 10 40 ns PIC12C67X 102
A/D absolute error (total) EABS 1 LSb VREF = VDD = 5.12V, VSS ≤ VAIN ≤ VREF 105
A/D integral linearity error EIL 1 LSb VREF = VDD = 5.12V, VSS ≤ VAIN ≤ VREF 105
A/D differential linearity error EDL 1 LSb VREF = VDD = 5.12V, VSS ≤ VAIN ≤ VREF 105
A/D full scale error EFS 1 LSb VREF = VDD = 5.12V, VSS ≤ VAIN ≤ VREF 105
A/D offset error EOFF 1 LSb VREF = VDD = 5.12V, VSS ≤ VAIN ≤ VREF 105
Reference voltage VREF 2.5 V 105
Recommended impedance of analog voltage source ZAIN 10 kΩ 105
A/D clock period TAD 1.6 µs TOSC based, VREF ≥ 3.0V 106
A/D clock period TAD 2 4 6 µs A/D RC Mode 106
Conversion time (not including S/H time) TCNV 11 11 TAD 106
Acquisition time TACQ 5 µs Amplifier setting time; input changed by not more than 1 LSb from last sampled voltage 106
Acquisition time TACQ 20 µs 106

CAD (KiCad official)

  • Symbol: PIC12C671-04I
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: PDIP-8 (KiCad packages3D, STEP)
  • 3D model files: pic12c671-04i-etched.step / pic12c671-04i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic12c671-04i.step / pic12c671-04i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (130 pp, sha256 e9cddfd1ac7c837d, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF