main
Ray pi7c9x760czdex: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 3354139
{
  "schema_version": 1,
  "type": "component",
  "slug": "pi7c9x760czdex",
  "title": "PI7C9X760CZDEX",
  "brief": "Diodes Incorporated UART, QFN-24-EP(4x4). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "interface",
    "pi7c9x760czdex"
  ],
  "component": {
    "mpn": "PI7C9X760CZDEX",
    "manufacturer": "Diodes Incorporated",
    "package": "QFN-24-EP(4x4)",
    "pin_count": 25,
    "category": "Interface",
    "subcategory": "UART",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8560088737129926656",
    "parts": {
      "symbol": "pi7c9x760czdex.kicad_sym",
      "footprint": "pi7c9x760czdex.kicad_mod",
      "model_3d": "pi7c9x760czdex-etched.glb",
      "model_3d_plain": "pi7c9x760czdex.glb",
      "model_3d_step": "pi7c9x760czdex-etched.step",
      "model_3d_step_plain": "pi7c9x760czdex.step",
      "lbr": "pi7c9x760czdex.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "RESET",
        "type": "input",
        "description": "Active-LOW reset input. A LOW pulse longer than 40 ns resets internal registers, forces all outputs to their reset state, and enables mode strapping. UART TX is idle and RX is ignored while asserted."
      },
      {
        "number": "2",
        "name": "XTAL1",
        "type": "input",
        "description": "Crystal input or external clock input. Connect a crystal between XTAL1 and XTAL2 (up to 24 MHz), or drive with an external clock up to 64 MHz."
      },
      {
        "number": "3",
        "name": "XTAL2",
        "type": "output",
        "description": "Crystal oscillator output. Used together with XTAL1 to form the internal oscillator circuit; leave floating when driving XTAL1 from an external clock."
      },
      {
        "number": "4",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive supply. Wide operating range 1.8 V / 2.5 V / 3.3 V. Decouple locally to VSS."
      },
      {
        "number": "5",
        "name": "I2C/SPI",
        "type": "input",
        "description": "Host interface select strap. HIGH selects the I2C-bus slave interface; LOW selects SPI mode 0 slave. Sampled at reset."
      },
      {
        "number": "6",
        "name": "CS/A0",
        "type": "input",
        "description": "In SPI mode: Schmitt-trigger active-LOW SPI chip-select (CS). In I2C mode: device address select bit A0 (combined with A1 selects the base slave address per Table 9)."
      },
      {
        "number": "7",
        "name": "SI/A1",
        "type": "input",
        "description": "In SPI mode: SPI serial data input (MOSI). In I2C mode: device address select bit A1 (combined with A0 selects the base slave address per Table 9)."
      },
      {
        "number": "8",
        "name": "SO",
        "type": "tri_state",
        "description": "SPI serial data output (MISO), tri-stateable. In I2C-bus configuration this pin's function is undefined and must be left as no-connect (N.C.)."
      },
      {
        "number": "9",
        "name": "SCL/SCLK",
        "type": "input",
        "description": "I2C-bus clock (SCL) input, or SPI serial clock (SCLK) input. Function selected by the I2C/SPI strap on pin 5."
      },
      {
        "number": "10",
        "name": "SDA",
        "type": "bidirectional",
        "description": "I2C-bus data line, open-drain (bidirectional) when I2C is selected. In SPI configuration this pin is undefined and must be tied to VSS."
      },
      {
        "number": "11",
        "name": "IRQ",
        "type": "output",
        "description": "Interrupt output, open-drain, active-LOW. Requires an external pull-up (~1 kΩ at 3.3 V, 1.5 kΩ at 2.5 V) to VDD. Fires on GPIO input change, RX errors, RX data available, TX buffer space, or modem status changes when enabled in the IER."
      },
      {
        "number": "12",
        "name": "GPIO0",
        "type": "bidirectional",
        "description": "Programmable general-purpose I/O pin. Direction and level controlled by the GPIO register."
      },
      {
        "number": "13",
        "name": "GPIO1",
        "type": "bidirectional",
        "description": "Programmable general-purpose I/O pin."
      },
      {
        "number": "14",
        "name": "GPIO2",
        "type": "bidirectional",
        "description": "Programmable general-purpose I/O pin."
      },
      {
        "number": "15",
        "name": "GPIO3",
        "type": "bidirectional",
        "description": "Programmable general-purpose I/O pin."
      },
      {
        "number": "16",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground return."
      },
      {
        "number": "17",
        "name": "GPIO4/DSR",
        "type": "bidirectional",
        "description": "Programmable I/O pin, or modem DSR (Data Set Ready) input when configured for modem control."
      },
      {
        "number": "18",
        "name": "GPIO5/DTR",
        "type": "bidirectional",
        "description": "Programmable I/O pin, or modem DTR (Data Terminal Ready) output when configured for modem control."
      },
      {
        "number": "19",
        "name": "GPIO6/CD",
        "type": "bidirectional",
        "description": "Programmable I/O pin, or modem CD (Carrier Detect) input when configured for modem control."
      },
      {
        "number": "20",
        "name": "GPIO7/RI",
        "type": "bidirectional",
        "description": "Programmable I/O pin, or modem RI (Ring Indicator) input when configured for modem control."
      },
      {
        "number": "21",
        "name": "RTS",
        "type": "output",
        "description": "UART request-to-send output, active-LOW. Reflects MCR[1] or, if auto-RTS is enabled in EFR[6], is automatically driven based on RX-FIFO fill. Also used as RS-485 driver direction control."
      },
      {
        "number": "22",
        "name": "CTS",
        "type": "input",
        "description": "UART clear-to-send input, active-LOW. Readable via MSR[4]; also gates transmission when auto-CTS is enabled via EFR[7]."
      },
      {
        "number": "23",
        "name": "TX",
        "type": "output",
        "description": "UART transmitter output. In local loopback mode the pin is disabled and TX data is internally routed to RX."
      },
      {
        "number": "24",
        "name": "RX",
        "type": "input",
        "description": "UART receiver input. In local loopback mode the pin is disabled and the internal TX is looped back to RX."
      },
      {
        "number": "EP",
        "name": "VSS",
        "type": "power_in",
        "description": "Exposed thermal/center pad on the underside of the QFN-24. Metallic; must be soldered to the PCB ground plane."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8560088737129926656",
        "pages": 52,
        "sha256": "f897ef4d5061537b",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 25,
        "described": 25,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "pi7c9x760czdex.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4,
          4,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "f7d256794c4147daf24dcae0554fae18510315e565ad1e239b475be7fef80d8b",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "pi7c9x760czdex-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4,
          4,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "2fd5584fed0a8eea6bdeae93f1830bfadd263dba6311d0786b7a6cd9559383a1",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Diodes Incorporated",
      "Package": "QFN-24-EP(4x4)",
      "Category": "Interface",
      "Pins": "25"
    }
  },
  "variants": [
    {
      "mpn": "PI7C9X760CZDEX",
      "kind": "packaging"
    },
    {
      "mpn": "PI7C9X760CZDEXL",
      "kind": "packaging"
    }
  ],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "pi7c9x760czdex"
  ],
  "discovery_pitch": "PI7C9X760CZDEX (Diodes Incorporated) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "pi7c9x760czdex.kicad_sym",
    "pi7c9x760czdex.kicad_mod",
    "pi7c9x760czdex.glb",
    "pi7c9x760czdex.step",
    "pi7c9x760czdex.lbr",
    "docs/hero.png",
    "docs/pi7c9x760czdex-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-25T04:19:56.365Z"
}