Generated by kicad-footprint-generator · KiCad file format 20260206
PI6CG33801CZLIEX
Diodes Incorporated · Clock Generators / Frequency Synthesizers / PLL · TQFN-48-EP(6x6)
PI6CG33801CZLIEX from Diodes Incorporated, in a TQFN-48-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SS_SEL_TRI | input | Tri-level latched input that selects the spread spectrum amount at initial power up, with 1 = -0.5% spread, M = spread off and 0 = spread off. |
| 2 | GND_XTAL | power_in | Power ground for the oscillator circuit. |
| 3 | XTAL_IN/CLK | input | Crystal input or CMOS reference input, with 25 MHz input frequency. |
| 4 | XTAL_OUT | output | Crystal output for the 25 MHz oscillator. |
| 5 | VDD_OSC | power_in | Power supply for oscillator circuitry, nominal 3.3V. |
| 6 | VDD_REFOUT | power_in | Power supply for the buffered CMOS output, nominal 3.3V. |
| 7 | SADR/REFOUT | bidirectional | CMOS latch that selects the SMBus address or the LVCMOS REFOUT function, with an internal pull-down. |
| 8 | GND_REFOUT | power_in | Ground for REFOUT. |
| 9 | GND_DIG | power_in | Ground for digital circuitry. |
| 10 | SCLK | input | CMOS SMBUS clock input, 3.3V tolerant. |
| 11 | SDATA | bidirectional | CMOS SMBUS data line, 3.3V tolerant. |
| 12 | VDD_DIG | power_in | Power supply for digital circuitry, nominal 3.3V. |
| 13 | VDDO | power_in | Power supply for differential outputs. |
| 14 | OE0# | input | Active low input for enabling the Q0 pair, with an internal pull-down; 1 disables outputs and 0 enables outputs. |
| 15 | Q0+ | output | Differential HCSL true clock output Q0. |
| 16 | Q0- | output | Differential HCSL complementary clock output Q0. |
| 17 | OE1# | input | Active low input for enabling the Q1 pair, with an internal pull-down; 1 disables outputs and 0 enables outputs. |
| 18 | Q1+ | output | Differential HCSL true clock output Q1. |
| 19 | Q1- | output | Differential HCSL complementary clock output Q1. |
| 20 | VDD | power_in | Power supply, nominal 3.3V. |
| 21 | VDDO | power_in | Power supply for differential outputs. |
| 22 | GND | power_in | Ground. |
| 23 | Q2+ | output | Differential HCSL true clock output Q2. |
| 24 | Q2- | output | Differential HCSL complementary clock output Q2. |
| 25 | OE2# | input | Active low input for enabling the Q2 pair, with an internal pull-down; 1 disables outputs and 0 enables outputs. |
| 26 | Q3+ | output | Differential HCSL true clock output Q3. |
| 27 | Q3- | output | Differential HCSL complementary clock output Q3. |
| 28 | OE3# | input | Active low input for enabling the Q3 pair, with an internal pull-down; 1 disables outputs and 0 enables outputs. |
| 29 | GNDA | power_in | Ground for analog circuitry. |
| 30 | VDDA | power_in | Power supply for analog circuitry, nominal 3.3V. |
| 31 | VDDO | power_in | Power supply for differential outputs. |
| 32 | Q4+ | output | Differential HCSL true clock output Q4. |
| 33 | Q4- | output | Differential HCSL complementary clock output Q4. |
| 34 | OE4# | input | Active low input for enabling the Q4 pair, with an internal pull-down; 1 disables outputs and 0 enables outputs. |
| 35 | Q5+ | output | Differential HCSL true clock output Q5. |
| 36 | Q5- | output | Differential HCSL complementary clock output Q5. |
| 37 | OE5# | input | Active low input for enabling the Q5 pair, with an internal pull-down; 1 disables outputs and 0 enables outputs. |
| 38 | VDD | power_in | Power supply, nominal 3.3V. |
| 39 | VDDO | power_in | Power supply for differential outputs. |
| 40 | GND | power_in | Ground. |
| 41 | Q6+ | output | Differential HCSL true clock output Q6. |
| 42 | Q6- | output | Differential HCSL complementary clock output Q6. |
| 43 | OE6# | input | Active low input for enabling the Q6 pair, with an internal pull-down; 1 disables outputs and 0 enables outputs. |
| 44 | Q7+ | output | Differential HCSL true clock output Q7. |
| 45 | Q7- | output | Differential HCSL complementary clock output Q7. |
| 46 | OE7# | input | Active low input for enabling the Q7 pair, with an internal pull-down; 1 disables outputs and 0 enables outputs. |
| 47 | VDDO | power_in | Power supply for differential outputs. |
| 48 | PD# | input | Input that makes the device sample latched inputs and start up on first high assertion, with low entering Power Down Mode and an internal pull-up. |
| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | TQFN-48-EP(6x6) |
| Category | RTC/Clock Chip |
| Pins | 49 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage | VDD, VDDA, VDD_OSC, VDD_DIG | 3.135 | 3.3 | 3.465 | V | 5 | |
| Output Power Supply Voltage | VDDO | 1 | 3.3 | 3.465 | V | 5 | |
| Reference Output Power Supply Voltage | VDD_REFOUT | 3.135 | 3.3 | 3.465 | V | 5 | |
| Analog Power Supply Current | IDDA | 22 | 25 | mA | All outputs active @100MHz | 5 | |
| Power Supply Current | IDD | 20 | 25 | mA | All VDD, except VDDA and VDDO, all outputs active @100MHz | 5 | |
| Power Supply Current for Outputs | IDDO | 29 | 34 | mA | All outputs active @100MHz | 5 | |
| Analog Power Supply Wake-on-LAN Current | IDDA_WL | 0.5 | 1 | mA | Q outputs off, REF output running | 5 | |
| Power Supply Wake-on-LAN Current | IDD_WL | 3 | 6 | mA | All VDD, except VDDA and VDDO, Q outputs off, REF output running | 5 | |
| Power Supply Wake-on-LAN Current for Outputs | IDDO_WL | 0.04 | 0.1 | mA | Q outputs off, REF output running | 5 | |
| Analog Power Supply Power Down Current | IDDA_PD | 0.5 | 1 | mA | All outputs off | 5 | |
| Power Supply Power Down Current | IDD_PD | 1 | 2 | mA | All outputs off | 5 | |
| Power Supply Current Power Down for Outputs | IDDO_PD | 0.05 | 0.1 | mA | All outputs off | 5 | |
| Ambient Temperature | TA | -40 | 85 | °C | Industrial grade | 5 | |
| Storage Temperature | -65 | 150 | °C | 5 | |||
| Supply Voltage to Ground Potential | VDDxx | -0.5 | 4.6 | V | 5 | ||
| Input Voltage | -0.5 | V | max VDD+0.5V, not exceed 4.6V | 5 | |||
| SMBus Input High Voltage | 3.6 | V | 5 | ||||
| ESD Protection (HBM) | 2000 | V | 5 | ||||
| Max Junction Temperature | 125 | °C | 5 | ||||
| Nominal bus voltage | VDDSMB | 2.7 | 3.6 | V | 6 | ||
| SMBus Input High Voltage | VIHSMB | 2.1 | 3.6 | V | SMBus, VDDSMB = 3.3V | 6 | |
| SMBus Input High Voltage | VIHSMB | 0.65 | V | SMBus, VDDSMB < 3.3V | 6 | ||
| SMBus Input Low Voltage | VILSMB | 0.8 | V | SMBus, VDDSMB = 3.3V | 6 | ||
| SMBus sink current | ISMBSINK | 4 | mA | SMBus, at VOLSMB | 6 | ||
| SMBus Output Low Voltage | VOLSMB | 0.4 | V | SMBus, at ISMBSINK | 6 | ||
| Input High Voltage | VIH | 0.75 | V | Single-ended inputs, except SMBus | 7 | ||
| Input Mid Voltage | VIM | 0.4 | 0.5 | 0.6 | V | SS_SEL_TRI | 7 |
| Input Low Voltage | VIL | -0.3 | V | Single-ended inputs, except SMBus | 7 | ||
| Input High Current | IIH | 5 | µA | Single-ended inputs, VIN = VDD | 7 | ||
| Input Low Current | IIL | -5 | µA | Single-ended inputs, VIN = 0V | 7 | ||
| Input High Current | IIH | 50 | µA | Single-ended inputs with pull up / pull down resistor, VIN = VDD | 7 | ||
| Input Low Current | IIL | -50 | µA | Single-ended inputs with pull up / pull down resistor, VIN = 0V | 7 | ||
| Output High Voltage | VOH | 0.8 | V | REFOUT, except SMBus; IOH = -2mA | 7 | ||
| Output Low Voltage | VOL | 0.2 | V | REFOUT, except SMBus; IOL = 2mA | 7 | ||
| Input Capacitance | CIN | 1.5 | 5 | pF | 7 | ||
| SS Modulation Frequency | fMOD | 30 | 31.8 | 33 | kHz | Triangular modulation | 7 |
| Input rise time | tRIN | 5 | ns | Single-ended inputs | 7 | ||
| Input fall time | tFIN | 5 | ns | Single-ended inputs | 7 | ||
| Clock stabilization | tSTAB | 0.75 | 1 | ms | From Power-Up and after input clock stabilization or de-assertion of PD# to 1st clock | 7 | |
| Output enable latency | tOELAT | 1 | 3 | clocks | Q start after OE# assertion; Q stop after OE# deassertion | 7 | |
| PD# de-assertion | tPDLAT | 25 | 300 | us | Differential outputs enable after PD# de-assertion | 8 | |
| REFOUT Duty Cycle | tDC | 45 | 50 | 55 | % | VT = VDD /2 V, driven by a Xtal | 8 |
| Output Voltage High | VOH | 660 | 784 | 850 | mV | Statistical measurement on single-ended signal using oscilloscope math function | 9 |
| Output Voltage Low | VOL | -150 | 150 | mV | 9 | ||
| Output Voltage Maximum | VOMAX | 816 | 1150 | mV | Measurement on single ended signal using absolute value | 9 | |
| Output Voltage Minimum | VOMIN | -300 | -42 | mV | 9 | ||
| Output Cross Voltage | VOC | 250 | 430 | 550 | mV | 9 | |
| VOC Magnitude Change | DVOC | 30 | 140 | mV | 9 | ||
| Duty Cycle | tDC | 45 | 50 | 55 | % | Measured differentially, PLL Mode | 9 |
| Output Skew | tSKEW | 20 | 60 | ps | Averaging on, VT = 50% | 9 | |
| Cycle to cycle jitter | tjc-c | 20 | 50 | ps | 9 | ||
| Input Frequency | fINPUT | 25 | MHz | XTAL_IN/CLK | 7 | ||
| Internal pull up resistance | Rpu | 120 | KΩ | 6 | |||
| Internal pull down resistance | Rdn | 120 | KΩ | 6 | |||
| CMOS Output impedance | ROUT | 20 | Ω | 7 | |||
| Output Frequency | fOUT | 100 | MHz | 9 | |||
| Thermal Resistance Junction to Ambient | θJA | 38.15 | °C/W | Still air | 21 | ||
| Thermal Resistance Junction to Case | θJC | 24.66 | °C/W | 21 |
CAD (KiCad official)
- Symbol:
PI6CG33801CZLIEX - Footprint:
Package_DFN_QFN:QFN-48-1EP_6x6mm_P0.4mm_EP4.2x4.2mm - 3D model: TQFN-48-EP(6x6) (KiCad packages3D, STEP)
- 3D model files:
pi6cg33801czliex-etched.step/pi6cg33801czliex-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pi6cg33801czliex.step/pi6cg33801czliex.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (24 pp, sha256
fc23edff4686574e, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).